máquinas de contracção usadas para venda

DIRECTLY FROM THE PRINT SHOP We sell this machine on behalf of our customer and try to realize his asking price. However, we are open to offers from you. Offer consisting of: Kallfass UNIVERSA 5050 - Angle welder Universa 5050 - Shrink tunnel Compact 650 S - Roller delivery On request, we can organize the following points for you: Packaging, loading, transport (by ship or plane) including customs clearance Obtaining a leasing quote

AC Automation LC800 semi-automatic L-sealer and shrink tunnel, belt width approx. 350mm, tunnel entrance approx. 350 x 180mm, sealing bar approx 500 x 400mm (L x W). Floorspace 2600 x 1000mm x 1400mm H  ... mais informação

Meurer Machine type: CM/HBB40-T80 Built :2000 V:400/230 Kw:19  ... mais informação

automatic, angle welder CMW/AL 80/60 with shrink tunnel CMS 60 - used - : Prices from location: 5.950.-€ (net) Manufacturer: Meurer Automatic angle welder CMW/AL 80/60 with shrink tunnel CMS 60 Year of construction 1996 Machine No.: 4.0514.04.96 Type plate shrink tunnel: Type: CMS 60 Angle welders: CMW/AL 80/60 The product may have the following maximum dimensions: 80 cm x 60 cm x 20 cm height. Output: Average 3000 pieces/hour The first part of the machine welds the film and the second part (the shrink tunel) makes the film smooth. Depending on the characteristic and size of the items, you can adjust the speed, quality of the welding and smoothness of the film. The control module and placed over the infeed belt (left part of the machine). Condition: good, but existing errors: Film processing must be accompanied manually because a spare part for automation is not av ...

Used traypacker with shrink packer MACDUE, type: H100/A - El. Connection: 400 V, 50 Hz, 55 kW, 80 A - Air pressure: 6 bar - Condition: Very good, little in use All documents, such as spare parts list, el. Wiring diagram and operating instructions are available. Further information on request. Inspection and test run are possible by arrangement.

Semi-automatic shrinkage machine for packaging products with plastic film by welding by means of welding rod and subsequent shrinkage. Welding beam length: 760 mm Product length: 110 - 630 mm Product width: 25 - 410 mm Product height: 5 - 380 mm Power: 300 to 600 containers/h Tunnel passage: 850 x 450 mm Max film width: 750 mm Film thickness: 40 - 100 micrometers The machine is in very good condition and ready for immediate operation. Sightseeing and test run are possible by arrangement.

Shrink tunnel BVM SC 4030 SD; good condition; cleaned and tested; new chains and sprockets in 2022; Passage width 400mm; Passage height 300mm; Speed max. 14m/min.; Double chamber. Shrink tunnel BVM SC 4030 SD; good condition; cleaned and checked; in 2022 new chain and chain wheels; working width 400mm; working hight 300mm; spedd up to 14m/min.; double unit.

Thank you for your interest in our used machines, which we can offer you as follows: Manufacturer: SME Group Model: FM 5540 shrink wrapping machine Built: 2010, hardly used Max Package Dimensions: 450x330x150mm Machinery Dimensions: 1685x828x1480mm Max welding dimensions 550x450x120mm Weight: 125kg Electrics: 1pH 110V/220V 50/60Hz, 2.5kw Foil: PVC, PP and POF We offer this machine " in existing condition " for sale, excluding any warranty/defect claims or assurances. from the hess. Lichtenau; Unpacked

Unused Turbovac Dip Tank - TV40/60 with air dryer The Turbovac dip tank and drying units offer you the ideal solution to complement your packaging line. Compared to vacuum pack / vacuum bags only. The Turbovac dip tank offers wrinkle-free transparency and significantly better product presentation. This is done by using heat and water to shrink the extra bag surrounding your product. Adding a drying unit will improve your packaging line and make it easier to label your product. Both machine types are designed to be integrated into the control of a vacuum packaging machine or alternatively they can operate independently. Manufacturer: Turbovac / Henkovac Type: TV40/60 Year: 2017, unused Material: Stainless steel Chassis dimensions (LXS) 570x400mm Immersion length 300 mm The maximum height of the product is 250mm Maximum water volume 70 liters Maximum product weight 20 ...

Shrink sleeves tunnel, for shrinking sleeves. completely overhauled! YOC 2002 Manufacturer: ARCOR GmbH, Power up to 6000 units per hour. If you have any further questions, please do not hesitate to contact us  ... mais informação

Kallfass Universa 400 with shrink tunnel, SlipTorque roller belt and conveyor belt Kallfass Universa 400 built in 2005 The system is immediately available. The price of the complete system includes the Universa 400, the Schlichter shrink tunnel, a SlipTorque roller belt and a conveyor belt. The machine is technically overhauled and is in very good condition. Technical data: - Length of cross welding punch: 450mm - Welding punch passage: max. 200mm - Min. product length: 80mm - Metronic embossing system - Control: Siemens S7-300 - Siemens Touch TP277 operator terminal - Welding punch with replaceable welding strip - Side welding knife combination, can also be exchanged for a wheel-knife system - Processable films PE and PO - Year of construction 2005 - Simple shrink tunnel DS-600 with switchable rotating bars - Conveyor belt 1000 x 400mm - SlipTorque roller conveyor 2 ...

Kallfass Universa 400 with shrink tunnel and grab section Kallfass Universa 400 NT Year of construction 2003 The system is immediately available. The Universa 400 is included in the price of the complete system. The machine is technically overhauled and is in very good condition. Technical data: - Length of cross welding punch: 450mm - Welding punch passage: max. 200mm - Min. product length: 80mm - automatic length compensation to reduce the punch gap - Welding punch monitoring - Side sweat monitoring - Foil holding plate Pwq9ya - Control: Siemens S7-300 - Operating terminal with Sütron BT20 - Welding punch with replaceable welding strip - Side welding wheel-knife combination, can also be exchanged for a knife system - Processable films PE and PO - Year of construction 2003 - Shrink tunnel Kallfass Standard - Gripper section with inline belt - Curved band can be ...

Kallfass Universa 400 with shrink tunnel and grab section Kallfass Universa 400 Year 2006 The system is immediately available. The Universa 400 is included in the price of the complete system. The machine is technically overhauled and is in very good condition. Technical data: - Length of cross welding punch: 450mm - Welding punch passage: max. 200mm - Min. product length: 80mm - automatic length compensation to reduce the punch gap - Welding punch monitoring - Control: Siemens S7-300 - Operating terminal with Siemens touch panel - Welding punch with replaceable welding strip - Side welding knife combination, can also be exchanged for a wheel knife system - Processable films PE and PO - Year of construction 2006 - Kallfass Compact 450 SO shrink tunnel - Gripper section with inline belt - Book magazine on gripper section - Ionization for blocking loose leaves - Cur ...

Thermo shrinking tunnel Shrink packaging quality for medium power infinitely variable separately adjustable top and bottom Max band-width: 600 mm Maximum clearance height: 220 mm  ... mais informação

Location: Kirchberg am Wagram Can be visited on site. This type of machine is a combined machine with hood cover and shrink frame. The machine is designed up to a maximum of 60 pallets / hour, whereby product type – film thickness – film quality – pallet height are decisive. The basis are Euro pallets with 1200 x 800 mm - conversion to industrial pallets is possible This machine was used by one of the European market leaders, a building material manufacturer. The machine was regularly serviced by the factory technician and is in a used but very good general condition. The machine has an open burner system, which has proven itself because it is very insensitive to dirt. The combined design saves space The machine is known for its very high availability Comparable machines are now available for about 200,000 euros

description: High quality control unit for bottle conveyors for 14 Motors. The KHS switchboards are air conditioned. The Danfoss inverters are overhauled and can be commissioned without concern. The software might be added as well. An andaptation to your project can be also offered. All information without guarantee. propulsion: 14 x SEW Movigear MGFAS4-DSM/WA/PE Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Co ...

Tunnel opening: 600x500mm, max. package weight: 10kg, power: 19.4kW, weight: 189kg. ... mais informação

Welding bar dimensions: 500x380mm, max. film roll dimensions: 300x600mm, max. pachaging dimensions: 500x380x200mm, length: 1275mm, width: 700mm, height: 1095mm. ... mais informação

Operational hours: ca. 2200h, including gripper feeder and Shrinking Tunnel PACKTECH Minipack. ... mais informação

Welding frame dimensions: 650x550mm, product dimensions: 130-550x30-450x20-240mm, connected load: 13.5kW, length: 3515mm, width: 1416mm, weight: 880kg, with documentation. ... mais informação