Fabricante:
(Categoria: 503)
Inlet cross-section: 1200 x 2300 mm Drive: 30 kW Rotor flight circle: 450 mm Rotor speed: approx. 80-140 RPM Rotor version: 24 single tooth Screen design: reinforced solid basket, with ribs Hopper: 1,000 mm in height, without lid Machine weight: approx. 6,000 kg Machine number: G-1-66 ... mais informação
Infeed width: 720 mm infeed height: 330 mm rotor flight circle: 1000 mm number of cutting knives: 2 piece number of counter knives: 1 piece infeed: 2 x 3 rolls motor power: 110 kW screen perforation: Ø 30 mm machine weight: ca 7,800 kg ... mais informação
Inlet cross section: 2500 x 1900 mm drive: 2 x 110 kW rotor flight circle: Ø 745 mm rotor speed: approx. 93 RPM rotor design: 185 PCs. cutting plates 50 x 50 x 25 mm screen perforation: Ø 70 mm counter knives: with cutting gap adjustment machine weight: approx. 29,000 kg ... mais informação
Inlet cross-section: 3,000 x 2,000 mm Rotors: 2 pcs. Rotor flight circuit: 565 mm each Rotor version: 2 x 25 pcs. cutting plates on tool holders Drive: 4 x 45 kW Weight: approx. 18,000 kg Intake opening: 3,000 x 2,000 mm Rotor system: Twin rotor Rotor flight circle: 565 mm each Cutting system: 2 x 25 pcs. cutting inserts on toolholder Engine power: 4 x 45 kW Machine weight: approx. 18,000 kg
Inlet cross-section: 1200 x 1600 mm Drive: 110 kW, without gearbox Rotor flight circuit: 380 mm Rotor speed: approx. 470 rpm Rotor design: 66 cutting plates on tool holders Screen version: solid screen basket, reinforced with ribs Sieblochung: 15 mm Counter knife: with cutting gap adjustment Machine weight: approx. 5,900 kg Intake opening: 1,200 x 1,600 mm Engine power: 110 kW, without gearbox Rotor flight circle: 380 mm Rotor speed: approx. 470 rpm Cutting system: 66 cutting inserts on toolholder Screen: reinforced screencage, 15 mm perforation Counter knife: with mechanical adjustment device Machine weight: approx. 5,900 kg
Inlet cross-section: 1200 x 1600 mm drive: 90 kW rotor flight circle: Ø 600 mm rotor speed: approx. 75Upm rotor version: 42 Pcs. cutting plates 60 x 60 x 30 mm on tool holders screen version: with quick-Change-device counter knife: with cutting gap adjustment gearbox: with torque-off material discharge by discharge conveyor TKF 400 x 5000 machine weight: approx. 13,400 kg machine number: A 2
intake opening: 2,500 x 2,000 mm rotor flight circle: 580 mm each rotor execution: special teeth motor power: 2 x 90 kW with planet gears weight: approx. 18,500 kg ... mais informação
ZENO double roller vorader ZDV 2500x2000, mobile on chain suspension, with discharge conveyor and magnetic separator, drive power 298 kW, 1900 rpm, MTU diesel engine, rotor flight circuit 575 mm, 2 x 12 rotor tools on tool holders, new design demonstration machine. ZENO Twin rotor shredder ZDV 2500x2000, mobile on chain chassis, incl. discharge conveyor and magnet separator, motor power 298 kW, 1900 rpm, MTU diesel motor, rotor flight circle 575 mm, 2 x 12 cutting inserts on tool holder, show machine.
intake cross section: 2500 x 1,700 mm motor power: 160 kW rotor flight circle: 670 mm rotor execution: cutting inserts on tool holders counterknife: with cut gap adjustment machine weight: approx. 24,000 kg ... mais informação
Hopper opening: 3,000 x 2,000 mm rotors: 2 Pcs. Rotor flight circle: each Ø 590 mm cutting tools: 13 pieces cutting plates 120 x 120 mm on tool holders bearing: pedestal drive: 2 x 90 kW machine weight: approx. 24,000 kg facilities: incl. hydraulic screen door latch / interfering substance removal
intake cross section: 5,000 x 3,500 mm motor power: 2 x 110 kW motor power hydraulic unit: 22 kW rotor flight circle: 635 mm rotor execution: 244 pcs. cutting tools on tool holders screen: hydraulically tiltable hopper volume: approx. 40 m³ machine weight: approx. 55 tons ... mais informação
intake cross section: 1,600 x 1,200 mm motor power: 2 x 45 kW knife width: 55 mm knife number: 56 pieces rotor flight circle: 655 mm Planetary gearbox ... mais informação
Permanent Overbelt Magnetic Separator TYPE PEM1200 1200 x 550 x 200mm = 4x eyebolt for suspension Drive roller + deflection roller S235 steel welded and machined Ø150x300mm convex overtightened, shaft fixed with tension bearings. Two-hole flange bearing UCFL with grease nipple, sealed bearing cage Propulsion: Slip-on geared motor GEMOTEG 0.18KW, speed 0.4m/sec Connection 400V, 50Hz IP54 protection Drive ready for connection up to motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt endless GB30 black matt 7 x T20 cleats high-frequency welded High-quality 3-fold aluminum construction 2 side mudguards V4A Magnet dimensions: 700x230x120mm magnetic core encased in soft iron, so that a very high permeability can be guaranteed. Underbody tightly closed and sealed with stainless steel plate and pole shoes.
Granulator granulator with 600 mm rotor width, 3 cutting blades, 37 kW motor power, very little used, like new. ... mais informação
Granulator with rotor width 1000 mm, motor 37 kW, with hopper attachment and hydraulic feed slide. Knives resharpened and whole machine repainted. Very good condition. Optionally with total separator and fan for the regrind. ... mais informação
Granulator with rotor width 500 mm, feed chute, 6 replacement screens with square holes. The upper part can be opened by means of a rack and pinion winch for easy knife change and cleaning. Machine is in very good condition and has been little used. Optionally, a fan and a total separator for the regrind are available.
Pre-shredder for garbage, waste wood, green waste, roots, commercial waste etc., five travel drives, auxiliary hydraulics, SPECIAL FEATURE: Engine, hydraulic system and electrics new after fire damage, service and tools new or as good as new. ... mais informação
Shredder for green waste, roots, waste wood, reed wood, organic waste, biomass, bark, etc. Equipment: Radio, hydraulic travel drive, overbelt magnet, SPECIAL FEATURE: Both shredding shafts, basket carrier with bio-cutting unit, baskets, tools, large service renewed before 100 hours of operation original Komptech.
Single shaft shredder with 1350 mm shaft, hopper 1350 x 1100 mm, motor 37 kW, all bearings new. Extremely robust construction. Slow runners. ... mais informação
Permanent Overbelt Magnetic Separator TYPE DMPM1400 1.600 x 900 x 220mm = Solid steel construction, welded Welded & painted construction RAL 7016 (anthracite grey) Magnet dimensions: 1.000x500x180mm Drive roller + deflection roller S235 steel welded and machined Ø220x700mm spherical overtightened, shaft fixed with tension bearings. Drive: Slip-on geared motor GEMOTEG 1.1KW, speed 0.4-0.6m/sec Connection 400V, 50Hz IP54 protection Drive ready for connection up to motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 20/2 0+010 PU black matt 5,4mm thick Conveyor belt width: 700mm 7 pcs. TG-40 cleats high-frequency welded Belt material: 3-ply particularly transversely stable Equipped with stainless alligator connectors RS125 Magnet Features: Built-in magnetic core: Strontium Ferrite Y30 Bonded SfRe strontium hard ferrite ...