trituradores usadas para venda

Polystyrene shredders for EPS waste and other materials made of polystyrene – EPS specifications: Electric motor: 5.5 Kw/380 V Speed: 120 rpm. Weight: approx. 1800 kg Dimensions: 2030x1100x1550 mm Throughput: up to approx. 25 m³/hour Insertion opening: 1500×600 mm Granule size: up to approx. 50 mm Throughput depends on the material and size of the sieve. PLANTS and SYSTEMS for SHREDDING EPS WASTE (no longer usable polystyrene expands, polystyrene) – STYRO-CUT® EPS is a hard plastic material. It is mass-reduced and has good mechanical properties. In the EPS block of 1 m³ volume, there is about 98% air in 3-6 million closed cells, which is why EPS works as a remarkable heat insulator. The plant was developed for the processing of smaller quantities of polystyrene, as well as systems for the mass processing of EPS waste. Such granules can be used: in n ...

Styrofoam shredder, shredder for polystyrene Styro-Cut 500 Technical specifications of the Styro-Cut 500 Dimensions (DxWxH): 920 x 1130 x 1640 mm Electric motor: 11 kW/2900 min – 1, 380 V Insertion opening: Ø 420 mm Weight: approx. 300 kg Throughput capacity: up to approx. 25 m3/h depending on sieve size and material Granule size: with standard sieve 9 mm. Production of granules up to 6 mm possible Styro-Cut 500 as an independent unit for manual shredding of the polystyrene Styro-Cut 500 can be used as part of a production line for crushing polystyrene. DS-50 is used as a coarse shredder, which is equipped with the help of a conveyor belt. The material is then conveyed to the Syro-Cut 500 shredder and finely shredded. Uses: – Companies that recycle the waste styrofoam – Construction industry that uses polystyrene as heat and sound insulation – Shops that  ...

Styrofoam shredder MAXI XL 1400 x 560mm MAXI 1400 x 600mm JUMBO 1800 x 800mm Insertion opening: L x W Polystyrene shredder MAXI XL: 1400mm x 560mm Polystyrene shredder MAXI: 1400mm x 600mm Polystyrene shredder JUMBO : 800mm x 800mm Dimensions: L x W x H (dimensions without blower) Polystyrene shredder MAXI XL: 2.4m x 0.9m x 1.6m Polystyrene shredder MAXI: 1.9m x 0.8m x 1.8m Polystyrene shredder JUMBO: 2.4m x 1.1m x 1.8m Motor power/connection/power conveying fan: Pre-shredder / conveyor blower Polystyrene shredder MAXI XL: 5.5 kW | Blower 2.2 kW Polystyrene shredder MAXI: 6.2 kW (with built-in screw under the pre-crusher) | Blower 2.2 kW Polystyrene shredder JUMBO 11.2 kW (with built-in screw under the pre-crusher) Conveyor blower 5.5 kW Throughput (EPS) Polystyrene shredder MAXI XL: 8-10 m3/h Polystyrene shredder MAXI: 25-30 m3/h Styrofoam  ...

Rotor 500 mm diameter x 1000 mm width, housing with 6 rows of stator blades Granulator with high cutting sequence for fine grinding Drive motor 90 kW Typical applications are all cuttable materials such as pulp, paper, rubber, foam, etc.  ... mais informação

Inlet opening: approx. 500 x 1000 mm Rotor width: approx. 1000 mm Rotor diameter: approx. 500 mm Stator knives: 3 Rotor blades: 6 x 3 With base frame Feed opening: approx. 500 x 1000 mm Rotor width: approx. 1000 mm Rotor diameter: approx. 500 mm Stator knives: 3 Rotor knives: 6 x 3 With base frame

Inlet: approx. 920 x 1580 mm Rotor width: approx. 1600 mm Rotor diameter: approx. 800 mm Stator knife: 3x2 Stator blade: 9x4 Propulsion: 160 kW  ... mais informação

Propulsion: 22 kW With control cabinet and sound insulation  ... mais informação

Inlet: approx. 300 x 300 mm Rotor width: approx. 280 mm Rotor blades: 3 Stator knives: 2 Drive: 7.5 kW Double bevel cut With roller feeder, electrical control box and soundproofing box  ... mais informação

Inlet opening: approx. 1000 x 1700 mm Rotor width: approx. 700 mm Rotor diameter: approx. 1000 mm Stator knives: 2 Rotor blades: 10 Propulsion: 110 kW  ... mais informação

Inlet: 450 x 580 mm Rotor width: 600 mm Rotor diameter: 450 mm Rotor blades: 3 Stator knives: 2 Engine: 75 kW  ... mais informação

Power supply: approx. 400 x 1250 mm Rotor width: approx. 1250 mm Rotor diameter: approx. 400 mm Stator knives: 3 Rotor blades: 9 Propulsion: 75 kW  ... mais informação

Rotor 450 mm diameter x 580 mm width Semi-open rotor (new) with 5 rows of blades, newly mounted 2 stator knives Drive 45 kW Hopper for conveyor belt feeding  ... mais informação

Inlet: approx. 600 x 580 mm Rotor width: approx. 600 mm Rotor diameter: approx. 450 mm Stator knives: 2 Rotor blades: 4  ... mais informação

Inlet opening: approx. 400 x 400 mm Rotor width: approx. 400 mm Rotor diameter: approx. 400 mm Stator knives: 3 Rotor blades: 3 Drive: 18.50 kW Feed opening: approx. 400 x 400 mm Rotor width: approx. 400 mm Rotor diameter: approx. 400 Stator knives: 3 Rotor knives: 3 Drive: 18.50 kW  ... mais informação

Inlet: 1200 x 950 mm Rotor width: 1200 Rotor diameter: 800 Stator knives: 4 Rotor blades: 7 x 4  ... mais informação

WEIMA shredder for carpentry-carpentry sawmill waste -old wood etc. Type:WL 4. Feeding opening: 600x1050.mm. ( Log Funer ) Rotor diameter:252.mm. Rotor width:600.mm. Drive power:18.5kW. Tools: ( Knife piece 28.) 40x40.mm. Koncav Vs9lrq Weight:1300.kg.  ... mais informação

Pre-shredder / shredder / chopper Fabr. Piranha for wood and plastic Motor 37 Kw Shaft length 600 mm with 3 x 5 Schneider knife with sieve 35 mm with control  ... mais informação

JMC 900 alligator shears (new machine) The JMC 900 has a hydraulic hold-down. The scissor head is operated with a foot pedal for individual cuts or continuous cutting. The scissor head is protected with a safety basket. Out of stock Delivery time: On request Manufacturer: Mc Intyre Knife length: 920 mm Measuring opening: 473 mm Cutting capacity: 233 tons Round iron ST 37: 88 mm diameter Number of strokes at 1/4 aperture: 26 / min Number of strokes at full opening: 9 / min Dimensions ( L x W x H ): 3200 x 1030 x 1800 mm Weight: 4400 kg Drive: 18.5 kw / 400 V + 1.5 kw electric motor cooler Operation: Foot pedal

Alligator scissors Lindemann Alibo The Lindemann Alibo has a mechanical hold-down. The scissor head is protected with a safety basket. Machine On hand Knife length : 760 mm Weight : 4200 kg Mouth width at the tip : 200 mm Cutting capacity: 0.45 kN/ mm² : Ø 70 mm Number of strokes : 20 – 40 cuts/min Dimensions: 4.20 x 1.50 x 1.80 meters Drive: 15 kw Hold-down: Mechanical

The JMC 150 has a mechanically adjustable hold-down. The scissor head is operated with a foot pedal for individual cuts or continuous cutting. The scissor head is protected with a safety basket. The JMC 150 is a tabletop unit for easy handling. Manufacturer: Mc Intyre Knife length: 150 mm Measuring opening: 105 mm Cutting capacity: 25 tons Round iron ST 37: 25 mm diameter Number of strokes at 1/4 aperture: 20 / min Number of strokes at 1/2 opening: 12 / min Number of strokes at full opening: 9 / min Dimensions ( L x W x H ): 660 x 520 x 620 mm Weight: 150 kg Drive: 1.5 kw / 230 Volt Operation: Foot pedal