outras máquinas de eliminação e reciclagem de resíduos usadas para venda

Used Chain Conveyor Belt Manufacturer: PAAL Type: KEM 1500 Year of construction: 2008 specifications: Conveyor width: approx. 1,500 mm Wheelbase:approx. 9,625 mm Strip course: approx. 2,935 mm horizontally underfloor, then rising to a length of approx. 4,500 mm below 28°, sloping below 10° on the remaining length and conveying into the press Conveyor belt speed: 0.27 m/sec Conveyor belt drive power: 4.0 kW Sidewall heights - in the horizontal part: 527 mm - in the climbing section: 777 mm Operating voltage: 3 x 400 VAC / 50 Hz / N / PE as far as possible pre-assembled, consisting of: - Strip scaffolding in solidly welded section steel and sheet steel edge construction, - additional sliding guides underneath the belt support profiles in the horizontal and climbing sections to support heavy loads, - Conveyor belt (quality: EP 200/2 2:1) with 2 ...

Aviteq feed channel Brand: Aviteq Type: OA 2490/900 ASA Length 2490 mm - Width 900 mm Drive by means of magnet vibrator Incl.: control apparatus & springs.  ... mais informação

Feed channel Hazemag 4000-1400 Brand: Hazemag Dim. feed channel: length 4000 mm - width 1400 mm. Drive: 2 vibration motors of 5.6 kW each Incl.: springs.  ... mais informação

Feed channel Hazemag 5000-1200 Brand: Hazemag Dim. feed channel: length 5000 mm - width 1200 mm. Drive: 2 vibration motors of 4 kW each  ... mais informação

Feed channel Jöst Type: FUF Length 4500 mm - Width 1400 mm with two vibration motors of 9.5 kW each  ... mais informação

Filtration unit furbished with 2 PALL 8304 X-length housings For Hydrolic and lube oil filtration Any filterelements available on request ... mais informação

Filtration / cooling unit Furbished with 2 pcs of water coolers and 2 filterhousings PALL 8304 X= Lengths All kind of filterelements available in differnt micron ratings. Ideal to solve both filtration and cooling on various installations using Hydraulic Oil ... mais informação

used lift-tilt device Manufacturer: WAGNER UMWELTTECHNIK Type: W HKV Year of construction: 2008 Load capacity:500 kg Drive power: ___ kW  ... mais informação

Detector detector metaldetector metal EZ-TEC type 9000 RD Voltage: 230/240V AC Amperage 315mA 1 used and 1 new  ... mais informação

used blower, Reitz MXE 160-003130-00 22kW as good as new Sale only to professionals, under exclusion of any warranty, prior sale, errors excepted.  ... mais informação

Used and refurbished turbine mill from Tecnoecology for the digestion of old cables, especially fine strands or computer cables. Balling takes place at about 3,000 rpm. The tools are rotatable and have 4 usable edges. The turbine mill can be operated stand-alone or integrated into an existing system without a pellet mill. The machine has a 20 kW drive and can process up to approx. 300 kg of material per hour.

Brand: BONFIGLIOLI Model: 1500 Year of manufacture: 2009 Length: 8340mm Width: 2550mm Height 3156 mm Engine: Diesel engine Minimum cutting length: 375 mm Adjustable cutting lengths (mm): 375/580/780/980 General Conditions: Functional Shearing force: approx. 800 tons Operating hours 3000 Machine weight: 56 t., brand: BONFIGLIOLI, model: 1500, Construction year: 2009, length: 8340 mm, width: 2550 mm, engine: diesel engine, Adjustable cutting lengths (mm): 375/580/780/980, Terms and Conditions: work, Weight of the machine: 56t., Brand: BONFIGLIOLI, Weight of the machine: 56t., Terms and Conditions: work, model: 1500, Construction year: 2009, length: 8340 mm, width: 2550 mm, engine: diesel engine, Adjustable cutting lengths (mm): 375/580/780/980, Model: 1500, Year of construction: 2009, Length: 8340 mm, Width: 2550 mm, Engine: Diesel Motor, Adjustable Cutting Lengths (mm): 375/580/780/980, G ...

Centrifuge Brand: Sion, model: 1400x700 mm Ø, motor: 55 Kw at 2960 rpm, year: 2009. No grill and no electrical panel. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.  ... mais informação

Hazemag feed hopper with take-off conveyor Brand: Hazemag Dim. Bunker : 6800x1900/1000x1200 mm Trigger strap: belt width 1200mm, length 8M. Drive: Slip-on gearbox 1.5 kW  ... mais informação

Technical data 3-deck ballistic separator:Manufacturer Hartner Maschinenbau GmbH & Co. KG, GermanyType Paper-SortYear of manufacture 2009Angle of inclination 15Throughput capacity with paper approx. 15 t to max. 25 t/hour, depending on materialDimensions of the three ballistic separator segments incl. steel frame and maintenance platform approx. 15,080 x 4,910 x 6,980 mm (l x w x h)Dimensions of the individual ballistic separator segments, without steel frame 5,027 x 3,465 x 2,980 mm (l x w x h)Height of drive axle above ground from infeed conveyor 5,960 mmDimensions of discharge conveyor belt under the ballistic separator 13,457 x 2,506 x 1,561 mmUsable width of discharge conveyor belt 1,950 mmFunctional description:Screening is carried out according to the principle of size sorting. Due to the screen opening and rotation speed can be adjusted to screen out cardboard as well as other im ...

Feed channel Metso Dim: length 4000 mm - width 1000 mm, Drive: 15 kW electric motor, incl.: steel construction.  ... mais informação

Overview of the equipment of a used sorting plant, year of construction 2009, with a sorting capacity of 25,000 t/yearFor sale is a complete used sorting plant for deinking paper, which can also be used for other materials. The plant consists of the following components:1 piece sorting cabin with an integrated office (control room), external dimensions 14,200 x 11,400 x 4,350 / 8,170 mm (l x w x h), with 3 sorting belts and 10 sorting places, air-conditioned (heated).1 piece ventilation system for the sorting plant with 17,600 m³/hour, manufacturer VTS Ventus, type VS-120-R-H/S1 piece infeed conveyor belt, right, no. 10, dimensions 7,360 x 1,200 mm, drive power 3 kW1 piece infeed conveyor belt, centre, no. 11, dimensions 7,360 x 1,200 mm, drive power 3 kW1 piece infeed conveyor, left, no. 12, dimensions 6,360 x 1,200 mm, drive power 3 kW1 piece sorting belt, long, right, no. 15, dimensi ...

Overview of the equipment of a sorting plant, year of construction 2009, extension 2015, with a sorting capacity of 25,000 t/yearFor sale is a complete sorting plant for deinking paper, which can also be used for other materials. The plant consists of the following components:1 piece feeding / dosing bunker with hydraulic moving floor and dosing drum, manufacturer Hartner, type Storage HAT1 piece 3-deck ballistic separator, manufacturer Hartner, type Paper Sort2 pieces overband magnetic separators, manufacturer IFE, type MEQL 1401 S-PS2 pieces cascade screens (vibrating screens), manufacturer IFE, type SM 2400 x 5000 F - UW302 pieces TiTech Autosort, manufacturer TOMRA Sorting GmbH, type TITECH AutoSort 4 (NIR1-VIS) (S-2800) (X-L), incl. accelerating belts1 piece sorting cabin with filter system, air-conditioned (heated), with 3 sorting belts and 10 sorting stations1 piece ventilation sy ...

Technical data IFE cascade screens (vibrating waste screens):Manufacturer IFE Aufbereitungstechnik GmbH, AustriaType SM 2400 x 5000 F - UW30Year of construction 2009Drive motor 22 kWRated current 43 AScreen dimensions overall 5,000 x 2,400 mm (l x w)Dimensions of individual sieve segment 950 x 800 x 130 mm (l x w x d)Screen hole grid 150 x 125 mmLength of screen fingers (steel tubes in front of the screen segments) 400 mmSwing width max. 18.5 mmWeight approx. 6,600 kgPossible applications:The waste screen is suitable for use in plants for sorting household waste, commercial and industrial waste, paper and cardboard, scrap metal and electrical waste. Blockage-free screening with the most difficult feed materials, with high throughput capacity, no pigtail formation with oversize particles, loosened oversize particle discharge over the entire screen width and no downtimes for screen cleanin ...

Hasler dosing conveyor belt with bunker Brand: Hasler A.A length = 2600 mm, Belt width: 950 mm Drive: 3 kW slip-on gearbox Dim. Bunker: 1400 X 1400 X 1800 mm  ... mais informação