máquinas para produtos farmacêuticos e cosméticos usadas para venda

• Mixing tank for suspensions • Useful capacity approx. 500 l • 1 agitator blade in the centre of the base with rubber wipers • Stirring blade speed fixed 18/min • 2 fixed guide rods • 1 drain at the side in the bottom Ø 200 mm with swivelling valve • Bottom flat slightly inclined • Drive 380V/50Hz, 3,6kW • Standing on 4 feet

Dedicated feeder for any tablets or capsules on blistering machines f.e. Uhlmann UPS 1070 • intermittent motion • for diverse product shapes • 60 strokes/min • format area max. 295 x 285 mm • own control unit, therefore universally applicable on different machines • suitable for Uhlmann rail system, easy mounting • incl. transport rack, mobile

• Blister size length 28 mm, blister width 100 mm, • Drawing depth 12 mm • Output knife 15-90 cyles/min • Sev. tool sets for blister size 28 x 100 m for capsules size 0, 1, 2 and 4, tablets and suppos (listing see photo), manual product feeding • Counter • IQ-OQ-documentation on French • Machine has no common punching tool but a lateral knife, connection 380V/50Hz This machine is offered at a special price and is sold as is - were is, without technical inspection.

• vessel in s/s • total volume vessel 1,100 ltr. • working temperature max. 143°C • working pressure+3/-1 bar • 12x pressure fastening screws • agitator propeller • inspection glass • washing ball • outlet in the bottom center • hinged lid • various outlets ... mais informação

• vessel in s/s • total volume vessel 1,100 ltr. • working temperature max. 143°C • working pressure+3/-1 bar • pressure fastening screws • agitator propeller • inspection glass • washing ball • outlet in the bottom center • hinged lid • manhole • various outlets ... mais informação

• Set up for ALU/PVC operation • Output 15-50 forming cycles/min, max. 100 punching cycles/min, max. 400 blisters/min • Format range and die-cutting area max. (feed x width) 220 x 188 mm • Drawing depth max. 12 mm • Vibratory feeder with brush box for tablets/capsules • Product inspection from underside of blister with colour camera Scanware Lynx-Spectra HR and own PLC Bachmann MX 207/DIO 248 for error carry-over (retrofitted in 2010) • Roller stand • Perforating station • Film monitor • Bad ejection • Ejection counter control • Vacuum pump • Waste cutter • Transfer belt to cartoner • Electronic cam control Digitronic CamCon • MC control system • Drive 220/38V/50Hz • Without format tools

• vessel in s/s • total volume vessel 1,200 ltr. • working temperature max. 143°C • working pressure+3/-1 bar • pressure fastening screws • agitator propeller • inspection glass • washing ball • outlet in the bottom center • hinged lid • various outlets ... mais informação

Set up for ALU/PVC and ALU/ALU operation • Format range blister (W x L) min 50 x 22 mm / max. 156 x 115 mm • Drawing depth max. 12 mm • Output 15 - 50 forming cycles/min • Transport length 42-115 mm • Film width 100-168 mm • Forming film Ø max. 450 mm, core Ø 76 mm (PVC) / 150 mm (ALU), pneumatic clamped • Cover film-Ø max. 240mm, core-Ø 76 mm, pneumatic clamped • Adhesive bonding point detection for sealing and forming film • Product feed by deticated feeder Uhlmann SimTab 2.1 for tablets/capsules • Forward feed after forming and sealing station • Tear and pore control for forme film and cover film Visiotec VisioScan MT-160/200 • Forming station with compressed air for PVC forming film • Heating station with extraction for the use of PVDC film • Mechanical forming station for ALU forming film • Filling control VisioChrom color with separ ...

• Nominal temperature 300 °C • Interior volume 52 l • Interior dimensions (W x D x H) 403 x 339 x 380 mm • 2 chrome-plated slide-in grates • Digital temperature control • Temperature selector limiter • Speed control circulating air fan • Fresh air filter, volume flow 10 m3/h • Without air flap adjustment • Temperature protection class 2 • Last check 11/2021 • Drive 220V/50Hz/1,5kW • Without under-table

• Nominal temperature 300 °C • Interior volume 751 l • Interior dimensions (W x D x H) 1,000 x 550 x 1,366 mm • 2 chrome-plated slide-in grates • Digital temperature control • Temperature selector limiter • Air flap adjustment supply air/circulating air • Temperature protection class 2 • Protection class IP 20 • Drive 400V/50Hz/6,1kW • Mobile on wheels

• Three drum printer for two side offset printing of film/sugar-coated tablets, oval-shaped products, not suitable for printing on capsules. • Output max. 250,000/h tablets • With vibratory feeder for drum connection and sorter (twin removal, capped tablets, tablet pieces) • PLC Allen Bradley PAC with touchscreen, user login and password function for 21CFR11 compliance (Effective 2012) • With change parts for tablets dia 8,2 mm • FAT documentation • Without vacuum pumps (2 needed) • Several spare parts • Electr. connection 230V/50Hz

Blister packaging line, consisting of: Thermoforming blister machine Mediseal CP 400 and folding box cartoning machine Mediseal P 3000, incl. new PLC, operator terminal (HMI) and servocontroller: Thermoforming blister machine CP 400: • Set up for PVC/ALU film (conversion to ALU/ALU possible at extra cost) • Output thermoforming station max. 50-60 cycles/min depending on blister format • Output punching station max. 400 blisters/min depending on blister format • Foil width max. 160 mm • Roll diam. max. 500 mm, core diam. 70-76 mm • 2 roll holders for thermoforming film with film spreader and gluing device for roll change during operation • Pull-off length in thermoforming range 140-220 mm • Drawing depth PVC max. 12 mm • Drawing depth ALU max. 9.5 mm • Feeding: directional tablet feed with spiral conveyor and alternatively brush box (without format parts) ...

• With precision balance Sartorius BP 61S • Measuring capacity >5 tbl./min. (BP 61S) • Tablet Ø max. 20 mm • Tablet height 1-12.5 mm • Max. tablet weight Tablet weight 30 g • Weighing range 61 g (BP 61S) • Readability 0.0001 g (BP 61S) • Interface RS 232 (RS 485 via external converter) for transmission of measured data to the control unit of a Kilian tablet press • Compatible with Kilian monitors CW 100/200 and the controllers C 50/52 IPC and VICON • Connection 220V/50Hz

Aerosol system for the pharmaceutical sector (set up for anti-asthmatic product), capacity max. 50 doses/min, consisting of: Dose sorter X02046-023/003 • Feed hopper • Elevator • Horizontal disc sorter • Blow-out unit with sterile-filtered nitrogen • Turning unit Valve sorter P 2058/1 • Sorting bowl for valves • Feeding of directional valves in Micromat Diaphragm filler Micromat P 2015/1B • Purger (displacement of air in the cans with propellant gas) • Putting on the valves • Crimping of the valves • Suspension filler for active ingredient, max. 100 ml • Propellant gas filler (deactivated), max. 100 ml Outlet turntable • Diam. 800 mm • Adjustable speed Conveyor belts - Available format set for can diam. 22 mm, heights 44 or 59 mm, filling quantity 20 ml, valve 20 mm without riser tube - Qualification documentation (IQ/OQ/DQ) a ...

• Automatic operation, product feed horizontal, box feed vertical • Folding box format range w 15-140 x h 10-70 x l 45-160 mm depending on format inserts (data not binding, exact statement after receipt of customers folding box sample) • for both sides flap closure by hot glue with hot melt device Nordson ProBlue 4 • Output max. 55 cycles/min • Product infeed conveyor with grouping and stacking station for small carton in infeed direction w 22 x h 9 x l 70 mm, other product infeeds possible at extra cost • Embossing unit for flap opposite insertion side with 2-line embossing stick • Outfeed conveyor with stacking chute for filled folding cartons • Available format sets for folding box sizes w 75+70, h 21+12 mm (depth adjustable without format) • Teachbox for checking the function of the closing tools • PLC Siemens S7-300 CPU 314 with operator terminal Siemens ...

• Suppository production line for prefabricated plastic cast packaging • Working direction from right to left • Output max. 10,500 suppositories/h • Material of cast packaging PVC/PE, PS/PE, PVC/PVDC/PE • Dimensions of pouring packages: Container spacing 17.3 mm (pitch), container height 44-51 mm depending on format tools, standard version. • Casting packaging Roll material printed and unprinted, roll diam. 500 mm, pick-up diam. min. 100 mm • Available format parts for container heights 44 mm (1.1 g) and 51 mm (2 g) • Polystar 100 GE film sealing device for sealing the film ends • Contactor control • Drive 400V/50Hz Line consisting of: Filling machine Citopac SFD-10 CP • 2 filling stations, distance 17,3 mm • -osing range per filling point 0.5-3.5 ml • Dosing via heatable intermediate container 0.3 l and heatable tap head with rotary slide cont ...

Blister packaging line consisting of: Thermoforming blister machine Uhlmann UPS 1030 MTI and folding carton packaging machine Uhlmann C 2205. Major service 2014 by the manufacturer. Thermoforming blister machine UPS 1030 MTI (multi-cycle intermittend): • Set up for ALU/PVC-PVDC-PP aclar operation / Alu/Alu cold forming prepared • Output punch max. 210 cycles/min • Output max. 600 blisters/min • Feed rate max. 144 mm • Blister width max. 255 mm • Drawing depth max. 10 mm • Roller stand • Dedicated feeder (standard feed channel vertical) for tablet / capsules • Sealing roller and preferential roller cooled • Product inspection with CCD colour camera VisioChrom retrofitted in 2014 • Compact station with embossing, perforation, die-cutter • Reject station for partially filled/empty • Transfer conveyor to cartoner • Control Beckhoff IPC with HMI  ...

• Format range folding box (5 inch) width 15-90, height 12-70, length 50-200 mm • Product length max. 155 mm • Output 20-120 cartons/min, clocked motion, the maximum speed depends on the format and product • Centrally adjustable product chain • Closure double-sided offset or equilateral tuck-in flaps • Leaflet folding and inserting machine from magazine GUK FA21/4, Cartonac 81 • Code reading Laetus Argus 4 (2x brochure, 1x folding box) • Colour embossing unit on both sides • Bad ejection with ejection counter control • Vacuum pump • Electronic cam gear retrofitted • SPS CAM • Various format parts (insertion hopper) • Various spare parts • Electr. connection 400V/50 Hz

The system consists of 9 different roller conveyor belts and 1 plastic link belt: • Roller conveyor belts, short, 2 pieces, type ITF/R-VV50, L 135 cm, roller width 35 cm, interroll drives • Roller bridge belts, 2 pieces, type ITF/R-VV50, L 98 cm, roller width 35 cm, interroll drives, fold-up • Accumulation roller conveyor belt, long, 1 piece, type ITF/R-FT50, L 294 cm, roller width 37 cm, slide belt drive, only runs when rollers are occupied • Accumulation roller conveyor belt, medium length, 1 piece, type ITF/R-VV50, L 195 cm, roller width 35, belt drive, runs only when rollers are occupied • Roller conveyor belt, medium length, 1 piece, type ITF/R-VV50, L 188 cm, roller width 35 cm, interroll drives • Roller curve belts 90°, 2 pieces, type ITF/RK-RT30-90° left/right, roller width 35 cm, interroll drives • Plastic link conveyor belt, long, 1 piece, type ITF/MGK, L ...

• Format range folding box (5 inch) w 15-90, h 12-70, l 50-200 mm • Output 20-120 folding boxes/min, clocked motion, the maximum speed depends on the format and product • Product infeed conveyor CAM 502 H for cylindrical products (diam. 18-67 mm, h 45-150 mm) and rectangular products (w 15-117, h 15-67, l 45-150 mm), equipped for bottles with bottle-transfer chicane and pusher in product chain • Centrally adjustable product chain • Closure double-sided offset or equilateral tuck-in flaps • Leaflet folding and inserting machine from magazine GUK FA21/4, Cartonac 91 • Code reading Argus 6012 (1x brochure, 1x folding box, 1x brochure presence in folding box) • 1 KBA-Metronic hot-stamping unit (without embossing stick), for flap insert side, retrofitted 2018 • Bad ejection • Vacuum generator • HMI/IPC touch panel Siemens Simatic TP700 Comfort, Windows CE 6.0,  ...