máquinas para produtos farmacêuticos e cosméticos usadas para venda

• Set up for ALU/PVC operation • Output 15-50 forming cycles/min, max. 100 punching cycles/min, max. 400 blisters/min • Format range and die-cutting area max. (feed x width) 220 x 188 mm • Drawing depth max. 12 mm • Vibratory feeder with brush box for tablets/capsules • Product inspection from underside of blister with colour camera Scanware Lynx-Spectra HR and own PLC Bachmann MX 207/DIO 248 for error carry-over (retrofitted in 2010) • Roller stand • Perforating station • Film monitor • Bad ejection • Ejection counter control • Vacuum pump • Waste cutter • Transfer belt to cartoner • Electronic cam control Digitronic CamCon • MC control system • Drive 220/38V/50Hz • Without format tools

Used bachiller model PC-200 stainless steel vacuum mixer. 338 litre total capacity, 126-200 litre working capacity. Mixing bowl approximately 866 mm diameter x 650 mm straight side. Flat top and inverted dished bottom rated full vacuum. Stainless steel jacket rated 3 bar pressure. Anchor agitator with teflon scrapers driven by 2.2 kw 220/380 volt 3/50 1415 rpm or 2.55 kw 440 volt 3/60 1715 rpm motor through sabre model mas55df gearbox 69:1 reduction ratio. Approximately 220 mm diameter dispersion blade mixer direct driven by 7.5 kw 380 volt 3/50 1450 rpm or 8.6 kw 440 volt 3/60 1755 rpm motor. Lid raised and lowered by 0.55 kw 220/380 volt 3/50 1400 rpm or 0.63 kw 440 volt 3/60 1695 rpm hydraulic power pack. New 1987.

Used circulation dissolver HUBBES type HMUD with a capacity of 2000 l The all-purpose mixer is suitable for the preparation of different masses, such as creams, fat masses, etc. The container is made of stainless steel, single-walled. Three suspension points are mounted on the container, on which the container is stored and has been provided with load cells, for automatic loading and exact display of the contents. A manhole with protective circuit mounted in the drive dome enables monitoring of the mixing process as well as cleaning and maintenance work. The drive for the central shaft with wall scraper and the rotating dissolver shaft are located in the drive dome. For HUBBES, the central shaft for the wall scraper is typically designed without floor support. Four feed nozzles and an outlet for emptying are installed for loading the individual components. Useful volume: 3,00 ...

• Package dimensions L 45-300 mm, W 40-190 mm, H 16-100 mm depending on format set • Output max. 47 cycles/min, the max. output depends on the format and product • For all heat-sealable films (PP/PVC/PE/Cellophane) • Film roll outer diam. max. 320 mm, width max. 425 mm • 90 degree infeed belt • Knife bridge with new knife • Eltex film unloader with discharging bar • Perforation knife • Without tear thread device • Without multi-layer stacker • Various format parts • Contactor control • Electr. connection 230/400V/50Hz

Allgaier vibrating screen, Sieve diameter:: 490 mm, Number of sieves:: 1, Mesh size:: 1,2 mm, Electric:: 380/400V , Dimensions (mm): 1100x700 H 1150  ... mais informação

STOCK NUMBER U2064 Description: Used line for compacting powders by ALEXANDERWERK (Germany). Line consist of: - feeding system - includes: 50 l powder container, rotary valves, vacuum pump, piping and bag filter. - horizontal, twin screw, feeder with adjustable working speed in range 0-77 rpm. - granulating system - includes - preparation granulator and two precise granulators, type RFG 150N. All granulators works with adjustable speed in range 0-112 rpm. - intermediate tank with screw type agitator, working with adjustable speed in range 0-20 rpm. - roll compactor ALEXANDERWERK model WP170/120V, designed in stainless steel. Machine has two rolls, each with width 120 mm x diameter 170 mm, mounted vertically. Rolls are working with adjustable speed in range 0-20 rpm. Driven by gearbox and electric motor 7.5 kW. Rolls are pressured via hydraulic device. Maximal pressing power up ...

This machine is used to process a wide variety of ampoules and vials, the diameter of which can be up to 30 mm and height up to 140 mm. The machine only processes self-adhesive (adhesive) labels. Apart from the label dispenser fitted as standard, the machine can be equipped with a large number of devices additional: Coded tag reader Hot encoder Luminescence detector Print control station Output: store full” check Label reserve monitoring, Elec: 220/380 V / 2.2 Kw / 50 Hz , Dimensions (mm): 1900x2050 H 195, Diameter of ampoules and vials: Max 30mm , Height of ampoules and vials: Max 140mm, Weight (kg): 345

Powder turbo mixer (1x), Make Drais, Type T-2000 FM1, Year of construction: 1989, Material Mild steel, Working pressure jacket 3 Bar, T-arms , Capacity 2000 Ltr, Trough sizes dia. 1200x1950mm, Top connections dia. 300mm + dia. 100mm + dia. 25mm, Inspection hatch 600x450mm + 300x200mm, Outlet dia. 200mm, With jacket (105 Ltr), Max. temperature 143 Degr. C., With adjustable

Powder Mill powder mill Manufacturer: Glatt Model: TR 160 ... mais informação

HAMMERMILL JESMA OPTI-700 – 60 Cv – 1,500 RPM The machine is located in Spain. ... mais informação

• Suitable for funnel ampoules 1-30 ml depending on the format set • Preheating and capping station, without burning station • Output max. 6,000 ampoules/h depending on ampoule size • 2 filling stations, 2 closing stations • Connections for gas + oxygen • 2 transport screws, 2 format stars for 2 ml ampoules • 1 transport screw, 1 format starwheel for diam. 11.75/H29 mm • 12 pumps 0.2-2.1 ml, little used • Various filling needles • Suction unit • Drive 400V/50Hz • Mobile

Maximum width of forming film : 150 mm Maximim forming depth : 12 mm Mechanical output : 65 cycles per minute Output of blister : 300 blisters per minute Reel of thermoforming film : 450 mm diameter Reel of lidding film : 250 mm diameter Air consumption : ca. 10 Nm3/h Operating pressure : 6-7 bar Cooling water : 0,12 M3/h power consumption : 12 Kw Weight : 1600 Tablet feeding system : Dedicated feeder for 3 differents tablets color Camera system with automatic discharge

Power installed :11 Kw. Power consumption :5,5 Kw. Production :15, 50 strokes per minute for 12 mm depth forming 15, 40 storkes per minute for 28 mm depth forming Index :Max. 145, 222 mm Format range :forming area 220 mm length 188mm width Depth forming :12 and 28 mm, forming reel : 460 mm, covering reel :Max. 300 mm Forming thickness :Min. 0,1 mm, max. 0,5 mm Width covering foil : min. 90mm max. 210mm, of the internal reel : 70..76 water consumption :aprox. 0,1 m3/h. Compress air consumption :aprox. 6 Nm3/h , without pre heating :aprox.14Nm3/h, with pre heating

equipped with a LAETUS system flask tilter Was previously used on a syrup line, Elec: 380V 50Hz, A + B (mm): 140mm max, A (mm): 15 - 90mm, B (mm): 12 - 70mm, C (mm): 50 - 200mm, Dimensions (mm): 2280 x 1570 mm, Height (mm): 1755 mm, Documentation: X in Spanish ... mais informação

Electrical consumption: 4.0 kW average consumption: 3.5 kW mechanical Speed max. 100 Cartons/minute product power supply: max. 300 blister/min Size: A x B x H Min. 30x15x70 mm Max. 100 x 85 x 150 mm Folding machine Prospectus Guk sizes. 3000 x 1300 x 1660 mm compressed air consumption 4-6 bar without elevation 1-2 Nm3/h with prospectus 5-8 Nm3/h Leatus for prospectus code, case and prospectus presence

GIUSTI mixing vessel 300mm dia x 470mm deep with shallow dish base, gross capacity 33 litres approx working capacity range 5-25 litres, top entry Silverson model AX3 homogeniser with 60mm dia workhead, 0.26kw 2730rpm 415v 3ph supply flameproof motor. Scraped surface main mixer, 30mm dia bottom product outlet. Stainless steel heating jacket, insulated and clad in rigid stainless steel, rated at 3bar w.p. 6bar t.p; Stainless steel control panel with 2 x amp meters, motor stop/start, LCD display for temp, variable speed control with RPM display for main motor. Overall dimensions 1350mm x 800 x 1660mm high. Supplied new in 1990, previously used on cosmetic product manufacture, excellent condition.

Lodige FM130D ploughshare mixer, Serial: 12321, 130L ploughshare mixer, stainless internals with stainless breaker, bottom mounted discharge with manual discharge valve, 3Ph this extra information is standard for this model. Please always double-check the details during a visit The Lodige FM130D Multishaft mixer is a high-performance pharmaceutical machine designed for mixing and blending powders, granules, and other pharmaceutical ingredients with exceptional precision and efficiency. With a capacity of up to 130 liters, this model is suitable for small to medium-scale pharmaceutical production processes. Equipped with multiple mixing shafts and a unique mixing mechanism, the Lodige FM130D ensures thorough and homogeneous blending of ingredients, resulting in consistent product quality and uniform distribution of active pharmaceutical ingredients (APIs) throughout the mixture. ...

• Useful capacity 663 l • Double jacket 48 l • Operating temperature 160°C • Operating overpressure tank -1/2 bar • Double jacket max. 6 bar • Container can be tilted for emptying • Lift lid for emptying by external lifting device (not included) • Parts in contact with product made of stainless steel 1.4435 (AISI 316 L) • Propeller agitator 2.6 kW • Anchor agitator with side scraper 2.2 kW • Temperature display • Pressure gauge • Hose connection in pressure lid with spear tap • Sight glass • Lighting • Pressure fittings • Drive 380V/50Hz

N° of Stations 35 Output tablets per hour 70.000 - 210.000 Maximum tablet diameter 16 mm Maximum depth of fill 8.5 mm Upper punch entry 1.5 - 8 mm Die type B tooling Die diameter 30.1 mm Die height 22.22 mm Upper/lower punch length 133 mm Punch body diameter 19.05 mm Compression force 80 kN Power 3.75 kW Net weight 1143 Kg Can be also for doble layer.

• Format range folding box (5 inch) width 15-90, height 12-70, length 50-200 mm • Product length max. 155 mm • Output 20-120 cartons/min, clocked motion, the maximum speed depends on the format and product • Centrally adjustable product chain • Closure double-sided offset or equilateral tuck-in flaps • Leaflet folding and inserting machine from magazine GUK FA21/4, Cartonac 81 • Code reading Laetus Argus 4 (2x brochure, 1x folding box) • Colour embossing unit on both sides • Bad ejection with ejection counter control • Vacuum pump • Electronic cam gear retrofitted • SPS CAM • Various format parts (insertion hopper) • Various spare parts • Electr. connection 400V/50 Hz