máquinas para produtos farmacêuticos e cosméticos usadas para venda

Machine can be used as stretch bander with shrink tunnel and as full wrapping machine with side folding/sealing. • Output max. 22 packs/min., depending on the format • Straight infeed • 2 infeeds: For cartons and bottles • Sealing width max. 440 mm • Insertion length 60-360 mm • Insertion width 60-200 mm • Insertion height 30-165mm • Packing material PE/PP • Film width max. 345 mm • Format change approx. 15 min. • Stacking device • Shrink tunnel Skinettatherm with 2 blowers, 20-600°C • Outfeed conveyor after shrink tunnel 1,200 x 380 mm • PLC Siemens S7-300, touch screen Siemens Simatic TP27 • Drive 400V/50Hz

Very nice tableting machine IMA Comprima 300 with 4 sets of tooling. Round 9mm and 12mm. Oblong 16x9 and 16.5x9.5 Very few working hours. New computer installed 2013. Cleaning in place. Was in perfectly good condition when it was decomissioned.  ... mais informação

Vertical tank, with agitator of 400lts of capacity, calorifuged and with heating/cooling of half shank. Made of stainless steel 316L, on legs. ... mais informação

The ProCepT Granulator is used for wet or melt high shear granulation and pelletization. Depending on vessel size, the typical batch range varies from 15g to 1kg of product. The granulator is used to create wet agglomerates by high shear wet mixing of different powders. The atomized nozzle sprays the solvent with binder or active on the powder vortex, created by the impeller and chopper. The ProCepT Granulator is the ideal equipment for formulation R&D, demonstration or educational purposes and features: Combination of plexi and glass for excellent process transparency Stainless steel vessels available Integrated on a trolley, wall mounted or on a fixed table/floor stand Monitoring and control of all critical parameters Water and organic solvents Easy clean-ability and strip-down of components in minutes Different vessel sizes (for scale-up) Atomization nozzle with different orifices Qui ...

• Automatic/semi-automatic operation • Running direction from right to left • Packaging dimensions max. (w x l x h) 380 x 600 x 160 mm • Film width max. 550 mm • Film roll diam. max. 300 mm, core Ø 77 mm • Film thickness 15-50 ym • Sealing temperature 0-230°C • Rewinding of residual film • Shrink tunnel • Powered outfeed belt with sluice • Mobile on rollers • Foot switch • 7 pcs. unused film roll • Switch control • Drive 380V/50/60Hz

We are sellin Table TOP excess AOI machine. Machine is capable 0402 component inspection Due to quantity of products rised and INline AOI inspection purchased, SAKI AOI was placed into another room as a backup. Last working serial inspection date 2019. AS IS WHERE IS ... mais informação

specifications: Up to 400 PCS/MIN, 8 sealing heads, continuous rotary sealer. Vial diameter (mm) DF: Min 14, Max 52. Vials height (mm) HF: Min 35, Max 110. Cap diameter (mm) DC: Min 13, Max 33. Cap height (mm) HC: Min. 6, Max. 16. Power: up to 400 rpm. Standard voltage: 400V - 50 Hz.  ... mais informação

• Weighing range max. 750 g • d=0.05 g • e=0.1 g • Load cell EC 2000 • Belt run from left to right • Belt width 145 mm • Centre distances infeed belt/weighing belt/outfeed belt 370/270/470 mm • Bad ejection through pneumatic pusher • Without printer • Non calibratable • Drive 230V/50/60Hz

Maximum width of forming film : 160 mm Forming area : 150 x 125 mm Maximum forming depth : 15 mm Mechanical output : 100 cycles per minute Output of blister : 300 blisters per minute Reel of thermoforming film : 500 mm Reel of lidding film : 300 mm Inlet air pressure : 6-8 bar Feeding : Manual(can be automatic) Forming type : Vacuum

Blister packaging line consisting of: Thermoforming blister machine Uhlmann UPS 1030 MTI and folding carton packaging machine Uhlmann C 2205. Major service 2014 by the manufacturer. Thermoforming blister machine UPS 1030 MTI (multi-cycle intermittend): • Set up for ALU/PVC-PVDC-PP aclar operation / Alu/Alu cold forming prepared • Output punch max. 210 cycles/min • Output max. 600 blisters/min • Feed rate max. 144 mm • Blister width max. 255 mm • Drawing depth max. 10 mm • Roller stand • Dedicated feeder (standard feed channel vertical) for tablet / capsules • Sealing roller and preferential roller cooled • Product inspection with CCD colour camera VisioChrom retrofitted in 2014 • Compact station with embossing, perforation, die-cutter • Reject station for partially filled/empty • Transfer conveyor to cartoner • Control Beckhoff IPC with HMI  ...

• 11 load cells, 1 of which compensation • Weight range up to 5 g • e=d =1 mg • Output max. 50 cycles/min • Load cell MTC 10/30 • Bad ejection with single track rejection and ejection counter control • Touch panel 10,4 • IPC control • Electr. connection 380V/50Hz ... mais informação

The teedwater is pre-heated in the exchanger E009, by steam condensation coming trom the last column, and in the pre-heaters F004-F001 by condensate produced in every effect. The teedwater evaporates partially in the first column (E001) as heated by industriai steam. The industriai steam passes through the pre-heater F001 and is drained by steam trap ST001. The produced pure steam trom the top and the water not evaporateci trom the bottom 1 -pass to the tollowing effect, where the process is repeated at lower pressure and temperature. The distillate produced by pure steam condensation goes to the pre-heater F002. The process is repeated for all columns in the same way. The steam produced in the last effect is condensateci and cooled together with the distillate coming from pre-heaters in the exchangers E009 and E01O, by teed and cooling water. 1 - SINGLE EFFECT RUNNING DESCRlBTION ...

Stock number: UG6347 Used stainless steel conical mill by Frewitt (CH) model TC-150. Machine is driven by el motor with power 4 kW. Mill works with adjustable rotation in range from 500 up to 3800 rpm. Reported output depends on product and mesh of screen and can reach from 250 up to 600 kg/h. Machine is equipped with conical sieves with mesh 0.5 mm, 0.7 mm and 1 mm. Includes technical documentation.

The capacity declared by the manufacturer: 250-600 kg / h Adjustable speed range: 500-3800 rpm, Mobile device, Additional equipment included: conical sieves with a mesh of fi = 1mm, fi = 0.7mm and fi = 0.5mm Cleaner rotor seal, rotor shaft on which the chafer is mounted. ... mais informação

Rotary mill M-SP-MIL-4 Producer IL SUNG Type The main technological model M-SP-MIL-4 Producer IL SUNG Year of release: 2003 1. Purpose Grinding large fractions of raw materials (semi-finished products) Main technical features Parameter value Shaft rotation speed 0-3000 rpm Power supply 380V / 50 Hz Resource consumption 4.7 kW Perforated sizing mesh No. 1, mesh diameter 2.5 mm Perforated sizing mesh No. 2, mesh diameter 2 mm Perforated sizing mesh No. 3, mesh diameter 1.5 mm Perforated sizing mesh No. 4, mesh diameter 1.2 mm 2. Special requirements for installation and assembly Installed horizontally on a vibration-resistant foundation 3. Power lines Power supply 380V / 50 Hz 4. Supply line points Three-phase power socket 5. Resource consumption 4.7 kW 6. Equipment performance 100 kg / h

Manufacturer Zanchetta Model Rotolab Mixer Made in 2003. ... mais informação

• 10-track for thermal foils, max. temperature 220°C • Intermittent operation • Output max. 45-50 cycles/min (450-500 sticks/min) • Volume dosing (10 dosing slides) for mini tablets/granules/powder free-flowing 250 -1500 mg/bag • Bag lengths adjustable 50-155 mm • Bag widths depending on format set, with format set for belt width per bag 46 mm, finished bag width 18 mm • Product suction via Piab Vacuum Conveyor • 10 hot-stamping units Schmucker PL 1B MB, single-line, 17 types • Cutting knife for tear notch • Horizontal knife • Ionisation unit Haug for ionisation product infeed • Dust extraction • Outfeed belt 10-lane, e.g. for connection to 10-track 100% checkweigher (see our item no. 10-0219) • Lateral conveyor belt for bad bags • Transport trolley for film reel • PLC Siemens S7-300 • Electr. connection 380V/50Hz

ROSSI $ CATELLI DEPOSIT WITH STEAM AND AGITATION Tank reactor cooks steam creams of 250 liters of Rossi-Catelli capacity. It has 2 agitation systems, scratching and rapid agitation. Built-in steam installation. Inox 316   Model: Vascamiscelazion Capacity: 250 liters Working pressure: 2 bar Year 2003 Weight: 800 kg Width: 1850 mm High: 2450 mm Length: 950 mm

Wrap-around labeller for: Bottles Cans Jars Flacons Manufacturer: Newman, Model NV2 Inline used, good condition, from ongoing production. Suitable for cylindrical and slightly conical products. Easy format changeover. up to 80 products / min Dimensions: approx. 4500 x 1100 x 1600 mm Stainless steel DataSensor Weight approx. 500 kg Location: Near Stuttgart

The 5 liter trimix is intended for industrial use for the preparation of gels, creams, ointments requiring dispersion, dissolution, homogenization, deaeration, heat exchange. The Trimix is made up of: A table frame with stainless steel casing A mixer with two pendular coaxial movements: Slow peripheral movement: Motor: Power 0.25 kW Reduction-output speed: 50 to 200 rpm Driven by frequency converter Agitation: Anchor paddle +4 articulated PTFE scrapers Double direction of rotation Slow central movement of counter agitation: Motor: Power 0.25 kW Gearbox - output speed: 80 to 419 RPM Driven by frequency converter Agitation: 3 streamlined three-blade turbines with a diameter of 120 mm A tank bottom foam concentrate type EFC 70 GMS Motor: Power 0.75kW - speed 3000 rpm Output speed: 600 to 3000 rpm Driven by frequency converter Agitation: 70mm diameter narrow slot machined rotor/stator A ta ...