A indicação da distância não é possível, porque não foi possível determinar sua localização. O pré-requisito é que seu navegador permita cookies e determinação de localização.

 

Fabricante:
(Categoria: 832)

AKM 2
BVM 1
DUX 1
FKS 1
GUK 31
H+H 2
HB 1
MB 13
MBO 116
OMG 1
PGF 3
PMA 2
SBP 1
pós-impressão: dobradeiras / 自动折页机
Máquina: GUK Cartonac 2000-2 自动折页机
Número do item: 163239028
Ano de construção: 2014
usava

Sell a GUK folding machine Cartonac 2000-2 on behalf of a customer More information on request.  ... mais informação

pós-impressão: dobradeiras
Máquina: GUK  PA 21/3 插页手册
Número do item: 158166932
Ano de construção: 2000
usava

PA 21/3 High-performance brochure inserts for pre-folded brochures/package inserts Technical features: -Drive on the right -Solid construction -Low-noise drive - without gears -Modular system - Highest performance through the use of double curve, crank drive and electronically controlled stepper -Compulsory handover Sizes: -Inlet width max. 210 mm min. 60 mm -Inlet length max. 105 mm min. 15 mm Paper weight: -Recommended paper thickness 45 - 100 g/sqm Achievement: -Depending on paper quality and fold up to 400 rpm. Drive: -via chain Mass and weight at PA21/3: 1600 x 640 x 500 mm (length x width x height) Weight: 84 kg Compressed air connection for solenoid valve vacuum control 6 bar, vacuum connection: 0.6 bar, compressed air connection (Festo valve) for pneumat. Swivel actuator 6 bar The PA 21/3 are similar in principle to the PA 21/2, but h ...

pós-impressão: dobradeiras / 自动折页机
Máquina: GUK  Rs 21 760 Falzautomat 自动折页机
Número do item: 158167292
usava

GUK Slitting Machine RS 21/760 Technical details: -No double bows, false bows and no risk of mixing! -Insensitive to static charge -approx. 20% cost savings compared to processing batch goods -Automatic control of the cutting position -Synchronous control of the print mark -Installation of code readers additionally possible -Storage in maintenance-free needle and ball bearings -Paper roll on top, single or double roll stand -With and without integrated adhesive table -Drive left or right, with chain or timing belt -Smallest fold 15 mm -With automatic roller changer ARW 21 Specifications: -Min. format: (WxL) 60 mm x 105 mm -Format: (WxL) 210 mm x 315 mm -Roller outer diameter: max. 600 mm -Roll core diameter: Europe 70 mm USA and Japan 76 mm or 152.4 mm or 3 inch or 6 inch -Power: 300/minute, depending on section length -Capacity: For paper roll by. 600 mm, sectio ...

pós-impressão: dobradeiras / 自动组合折页机
Máquina: MBO K 66 6 PKL 自动组合折页机
Número do item: 163036186
Ano de construção: 2000
usava
Preço: 8.500 €

-Year 2000 -Max paper size 66x106 cms. -Anti noise hoods -Six electronic motorized buckles + 2 electronic knives -High pile feeder, Vaculift, Vacubelt, DV Pump -MBO MPC Control , Panel with all remote controls of the sizes and knives -Z 6 MBO mobile knife -HHS C 1100 glue system with 12 sections to connect -One spray glue gun, perforators and tools -Petratto DP 46 press station and stacker -All rollers in perfect conditions -Lot of parts and accessories

pós-impressão: dobradeiras / 包边机
Máquina: H+H KL 112-45-T10 + KL112.1 mobile 包边机
Número do item: 162241756
Ano de construção: 2002
usava

Folding machine H+H KL 112-45-T10; built in 2002; good condition; cleaned and tested; Inlet width 450mm; 10 folding pockets; Investor Gremser FN-K-TH; Area dial counter HHC-100; Transfer No.220.1-45 built in 2016; 2.Falzwerk KL112.1-mobil-45 Bj.2016; 6 folding pockets; Standing sheet display No.177-mobil 45 built in 2013; Display No.701-1500-52 built in 2016. Folding machine H+H KL 112-45-T10; good condition; cleaned and checked; working width 450mm; ten pockets; feeder Gremser FN-K-TH; count unit HHC-100; hang up conveyor No.220.1-45 year 2016; secound unit KL112.1-mobil 45 year 2016; six pockets; smal format delivery No.177-mobil45 year 2013; stream delivery No.701-1500-52 year 2016.

pós-impressão: dobradeiras / 包边机
Máquina: GUK FA 49/4 包边机
Número do item: 163206535
Ano de construção: 1991
usava

4 buckles  ... mais informação

pós-impressão: dobradeiras
Máquina: HEIDELBERG Stahlfolder 78 折叠口袋
Número do item: 163206524
usava

several folded pockets of a Stahlfolder 78 manually or motorized adjustable  ... mais informação

pós-impressão: dobradeiras / 右上页交付
Máquina: M.BäUERLE SKM 36 A 右上页交付
Número do item: 163206488
Ano de construção: 1999
usava

Standing sheet delivery M.Bäuerle SKM 36 A; cleaned and tested; new tapes; new drive belt; Max. Inlet width 360mm, min.50mm; height adjustable; Kicker. Small format vertical stacker M.Bäuerle SKM 36; cleaned and checked; new belts; new timing belt; max.infeed width 360mm, min.50mm; adjustable in hight; kicker.

pós-impressão: dobradeiras / 包边机
Máquina: HORIZON AFC-746 F 包边机
Número do item: 160676284
Ano de construção: 2016
usava

DIRECTLY FROM THE PRINT SHOP Offer consists of: Horizon AFC-746 F 6-pocket folding machine - Parallel fracture rolling condition: % - Cross-fracture rollers I condition: % - Cross-fracture rollers II condition: % - Rollers overhauled parallel fraction: 2.926€ - Cross-broken rollers on request - Folding machine AFC-746 F - Pallet feeder - Shed display Horizon folding machine AFC-746 F: 1. Folder: 6 pockets 2. Folder: Sword plus folded bag right 3. Folder: Sword - Paper weight: 40-250g/sqm - Stack height pallet feeder: 1.200mm -Format: 738x1.100mm with pallet feeder 738x1.300mm with round pile feeder min. 210x297mm - largest fold length: 560mm - smallest fold length: 35mm (58mm in bag 1) - Capacity: max. 240m/min, 35,000 cycles/h in cross-fracture - Dimensions: 4.379x1.870 - Weight: 2.441/2.578kg; Pallet/Round Pile Feeder On request, w ...

pós-impressão: dobradeiras / 包边机
Máquina: HORIZON AFC-746 F 包边机
Número do item: 160670897
Ano de construção: 2011
usava

Offer consists of: Horizon AFC-746 F 6-pocket folding machine - Parallel fracture rolling condition: % - Cross-fracture rollers I condition: % - Cross-fracture rollers II condition: % - Rollers overhauled parallel fraction: 2.926€ - Cross-broken rollers on request - Folding machine AFC-746 F Horizon folding machine AFC-746 F: 1. Folder: 6 pockets 2. Folder: Sword plus folded bag right 3. Folder: Sword - Paper weight: 40-250g/sqm - Stack height pallet feeder: 1.200mm -Format: 738x1.100mm with pallet feeder 738x1.300mm with round pile feeder min. 210x297mm - largest fold length: 560mm - smallest fold length: 35mm (58mm in bag 1) - Capacity: max. 240m/min, 35,000 cycles/h in cross-fracture - Dimensions: 4.379x1.870 - Weight: 2.441/2.578kg; Pallet/Round Pile Feeder On request, we can organize the following points for you: Packaging, loadin ...

pós-impressão: dobradeiras / 包边机
Máquina: HEIDELBERG Twinstacker TSH-70 包边机
Número do item: 161797217
Ano de construção: 2006
usava

Serial No. FH. DMA0-00272, The Twinstacker TSH Vertical Stack Delivery Is The Economical Solution To Broadly Cover The Medium To High Capacity Range. The Delivery Transports The Individually Pressed Sheets Through The Belt Section Without Marking. Subsequently, The Stacks Are Formed From The Top In Catch Baskets And Laid Out Alternately – In Two Stacking Levels Arranged One Above The Other. This Enables Effective Non-Stop Operation. The Simple Handling With Good Accessibility Also Facilitates The Processing Of Multiple-Ups. The Height-Adjustable Feed Table Ensures That The TSH Twinstacker Can Be Positioned Easily And Flexibly At The Various Preliminary Stations. Whether Laying Out Isolated Sheets Or Even In A Shingle Stream – The Twinstacker TSH Convinces In Every Respect With Its Performance. User-Friendly Stack Delivery, Mark-Free Laying Out Up To Two Uses, With User-Friendly Ergon ...

pós-impressão: dobradeiras / 折叠机
Máquina: GUK K72/6KL-F4 折叠机
Número do item: 159022432
Ano de construção: 1998
usava

6 Pockets, 2 Knives  ... mais informação

pós-impressão: dobradeiras / 折叠机
Máquina: MBO T500-2-X 折叠机
Número do item: 159229568
Ano de construção: 1994
usava

(Serial No. M12/42), Flatpile Feeder, Overhead Control Panel, 4 Pockets, 1 Cross Fold Knife, Delivery  ... mais informação

pós-impressão: dobradeiras / 折叠机
Máquina: HORIZON AFC-504 AKT 折叠机
Número do item: 160149978
Ano de construção: 2004
usava

Speed: 230 m/min, Full Automatic Adjustment Control, Touch & Work Technology, Memory Storage for Folding Programs, Flate Pile Feeder, 4 Pockets, 1 Knife, Anti Noise Hood, Delivery Conveyor, Standard Accessories  ... mais informação

pós-impressão: dobradeiras
Máquina: GUK FA 72/4 STAT 1, F4
Número do item: 106184465
Ano de construção: 1997
usava

Flatpile Feeder, 4 Pockets, 4 Pockets, 2 Pockets, Delivery ... mais informação

pós-impressão: dobradeiras
Máquina: MBO T52/4X
Número do item: 19164897
Ano de construção: 1980
usava

Roundpile, 4 pockets, 1 electronic knife, delivery  ... mais informação

pós-impressão: dobradeiras / 自动折页机
Máquina: GUK FA 36-4 /SAF 36 自动折页机
Número do item: 160614232
Ano de construção: 1999
usava

Pocket folder GUK FA 36-4 /SAF 36; good condition; cleaned and tested; Folding rollers need to be replaced; Format 36x45cm; 4 folded pockets; smallest fold 26mm; automatic suction feeder SAF 36; Double sheet inspection DBK 36; Shed display. Pocket folding machine GUK FA 36-4 /SAF 36; good condition; cleaned and checked; folding rollers must be changed; size 36x45cm; four pockets; smalest fold 26mm; automatic vacuum feeder SAF 36; double paper control DBK 36; Stream Delivery Unit.

pós-impressão: dobradeiras / 自动折页机
Máquina: STAHL TD 52/4/4/2 自动折页机
Número do item: 160770790
Ano de construção: 2001
usava

Steel TD 52/4/4/2 year 2001 flat pile feeder with Tremat Compressor Automatic Buckles SBP 46.2 up right sheet delivery Double Gate Fold very good rollers very good condition available immediately from stock in Germany  ... mais informação

pós-impressão: dobradeiras / 包边机
Máquina: HORIZON AFC-546 AKT 包边机
Número do item: 161611169
Ano de construção: 2002
usava

3 MONTHS WARRANTY Offer consisting of: Horizon AFC-546 AKT 6-pocket folding machine - Parallel fracture rolling condition: % - Cross Break Roll Condition: % - Technology: Touch & Work - Folding roller adjustment: automatic - Memory fold types: 17 standard fold types pre-programmed - Job storage: 100 memory locations for repeat jobs - Number of pockets / swords: 1. Folding: 6 pockets + sword - Operation of swords: fully automatic -Format: max. 540x760 mm; min.120x172 mm - Paper weight: 40-250g/sqm - Output: max. 40,000 cycles/h - Stacking height: max. 650mm - Power: 400V / 50Hz - 2.7kW - Dimensions: 2.780x1.050x1.680mm - Weight: 1.350kg If you wish, we can organize the following points for you: Packaging, loading, transport (by ship or plane) including customs clearance Obtaining a leasing offer

pós-impressão: dobradeiras / 折叠机
Máquina: HEIDELBERG 2. Falzwerk Stahlfolder TD-66 折叠机
Número do item: 163120673
Ano de construção: 2000
usava

mobile 2nd folder with 4 pockets, TD-66/4-T Motorized adjustable pockets Soundproofing hood  ... mais informação