Forging Hammers BECHE (SCHLOEMANN) 4000 T, DGH 40

metal working machines / other metal working machines / Forging Hammers
add to watchlist
send inquiry
print view
item-No.: 162126090 Quantity: 1 Date: 05.08.2023
Year of manufacture:
Price: request quote
Manufacturer: Beche (Schloemann)
Model: 4000 T, DGH 40
Type of machine: Forging Hammers
Description: Forging Hammers Beche (Schloemann) 4000 T, DGH 40

used machine

(Schloemann) Beche DGH 40 Ton ( Revamped by Schuler group 2019)

Manufacturer: BECHE (Schloemann) Type: DGH 40
YOM: Revamped 2019
Machine Number: 2412-HW
Including 12 Ton Wellman manipulator

Impact work: 40,000 mkg
Total bar lift.:1.250 mm
Maximum number of strokes:80 Pro Minute
Average score: 6 Pro Minute
Air consumption per ten blow Blow in . m
in required air at the strongest hit: 6.8 Cold Air
Compressor performance in m3/min: 41 Cold Air
Compressor performance in m3/min:27 Hot air (160° C)
Power requirement of the compressor in hp:260 Cold Air
Power requirement of the compressor in hp:180 Cold Air
Air tank capacity:30 m3
Steam consumption per hit with the strongest hit:3.5 kg
Steam consumption per minute (saturated steam):21 kg
Clear width between the guides: 1200 mm
Maximum singing sounds: 2700 mm
Lowest overall height of the dies without dovetail: 575 mm
Overall height above floor: 6200 mm
Total weight with sheet metal stand: 215 Ton
Total weight with cast iron strander: 235 Ton


Wellman 12 Ton Manipulator
YOM: 1976
1 FORCE MANIPULATOR OF 12 T 500:

Manipulator definition of 25 M/T
Maximum rated capacity: 12,700 KG I -
Pliers clamping force: 2 x 757 KN2 x 76 T
Maximum moment at clamping jaws: 249 KN/M 25.400 Kg/M -
Maximum moment at front axle: 474 KN/M 48.300 Kg/M 1.341 Kg/M
Torque at the clamping head: 13.2 KN/M
Useful traction force: 4.98 KN 1670 Kg
Clamping capacity: squares: minimum: 305 mm - Clamping capacity: squares: maximum: 865 m -
Clamping capacity: rounds t minimum 305m
Clamping capacity rounds 1 maximum: 1000m
Weight of the empty machine: 54,000 Kg
Front axle load: empty: 30,000 Kg
Load on front axle laden: 56,500 Kg
Load on rear frame unladen: 24,000 Kg
Load on rear frame: loaded: 10,000 Kg DIMENSIONS: 5.800
Overall length (without ingot): 7950
Overall width: 4,000
Radius of the circle of evolution (without ingot)
Wheelbase: 4297 m -21 Height of arm axis horizontal nin. : 915m
Height of arm axis horizontal max.: 1675
Amplitude of parallel lifting movement: 760 mm
Amplitude of oscillating movement above 1'hor. : 4.50
Amplitude of oscillating movement below hor.: 90
Diameter of clamping head rotation circle: 1800 mm - - SPEEDS:
Full opening of the clamps: 13 seconds.
Clamps fully K458009 closed: 11.5 seconds
Clamps lowered: 4 M/Min
Clamp lifting: 4 M:Mn
Oscillation towards the ground: 8.8 M/MIn.
Tilt Oscillation: 8 M:Min.
Lock-to-lock steering: 10 seconds
Forward or reverse translation: 60 M/Min.
Clamping head rotation, maximum: 12 rpm.

EQUIPMENT:

ELECTRIC MOTORS :
2 motors of 75 Hp at 1460 rpm. "C.E.M." (or UNELEC)

Equipment: "TELEMECANIQUE"
Motors, equipment, Start-Stop commands with buttons pushers, and the contact head on the mast will be hose-tight (washing the machine with hot water and steam).
Supply voltage: 380 Volts 50 Hz 3 phases + earth IN.)
48 Volts (or 24 Control voltage)

HYDRAULIC PUMPS:
T): 2 "DONKIN 18" variable flow pumps (identical to WELLMANN 3
Speed ​​1,500 rpm
Maximum flow 340 litres/minute.
Maximum pressure 87 Kg/cm2 -I Gear pump for steering

HYDRAULIC MOTORS: -
2 "DENISON-DERI" 5/8 3/34 motors,
speed 400 rpm: I "RUSTON" M-4875/2 C motor with reducer
seller offer No. resale Beche
Machine in stock: Yes
Seller-item-No.: Beche