Description: |
Bevel gear testing machine GLEASON 513
used machine
max. wheel diameter: 400 mm gear width: 0 mm module:
pinion diameter - max.: 254 mm axial cross angle: 90
° total power requirement: 15 kW weight of the machine ca.:
t dimensions of the machine ca.: m This machine is very
suitable for precision production testing of spiral and hypoid bevel
gears with shaft angle 90°. The gear spindle is vertical and the
pinion spindle is horizontal. The pinion cone distance can be
adjusted while the machine is working in order to find the optimal
mounting position whereby the gear is loaded with a preset torque.
The axial pinion position can be adjusted until the quietest
meshing position of the traction flank is found. Likewise, the thrust
flank can be tested during the return run. Marking compound is
sprayed on both sides of the teeth so the flank contact pattern can be
seen. Working cycles, as well as the positioning in the tooth gap,
are automatic. The gear quality can be assessed by recording the
harmonic frequencies, which are displayed on a separate monitor and
which can be analyzed with a RHF Control. Machine can be used for
soft testing of production parts, as well as for mating sets of
hardened gears and pinions prior to lapping, and for final testing
after lapping to select the optimum pinion mounting distance. Also
ideal for lab work, processing, and quality control.
Max.
gear outside diameter, approx. 508 mm Max. pinion outside
diameter, approx. 254 mm Axial cross angle 90 ° Offset of
pinion spindle above/below gear spindle, max. 102 mm Diameter of
taper hole, pinion spindle 99/95 mm Diameter of taper hole, gear
spindle 56/55 mm Speeds of pinion spindle, infinitely variable 0 -
1,250 rpm Speeds of gear spindle, infinitely variable 0 -
1,250 rpm Spindle drive, approx. 5 / 7.5 kW Total electrical
load, approx. 15 kW - 380 V - 50 Hz
Accessories / Special
H541166 Features Large display for 1 / 2 / 3 harmonies, display
for pinion distance, pinion speed, as well of gear torque in
kg/torque, etc. Hydraulic workpiece clamping. Hydraulic
slide clamping. Tank for marking compound with mixer and pump,
separate. Separate switch cabinet. Separate hydraulic
unit. Lots of spare parts, spare motors,
etc.
Condition : Good. Machine can soon be inspected
under power. Delivery : Ex stock, as inspected. Payment
: Net, after conclusion of contract.
Thank you for your
interest. We always have a good selection of gear machines available.
Please let us know what you need.
The data for
this ad was created with ModulMWS - the software solution of LogoTech
oHG.
seller offer No. resale 1049-385316
|