Inv. Num. : 6674 Type: ST 660 Producer: ADIGE Created: 1996 Parameters: Nominal Current: 16.5 kW Min. cutting length: 93/300 mm Tube length: 2000-7100 mm Tube diameter: 14x2-60x2.5 mm Machine weight: 1700 kg
Inv. Num. : 4861 Type: LT8 Producer: ADIGE Created: 2011 Parameters: Control system: Siemens ADIGE Switch-on hours: 51218 h Operating hours: 34560 h Laser power: 3 kW Working table length: 200 mm Working table width: 200 mm Feed length X-axis: 7750 mm Input length: 6000 mm Output length: 5500 mm Tube diameter: 220 mm Equipment: 3D head Resonator Rofin Sinar DC 030 Loader Discharger
Hydr. Metal circular machine Technical data: -Saw flaked diameter up to 350 mm -Cut range at 90 ° -around 110 mm -four-edged 100 mm -rectangle 180 x 40 mm -or 160 x 85 mm -at 45 ° -around 110 mm -four-edged 100 mm -Walking adjustable Li + Re ever 0-90 ° -2 cutting speeds 16 + 32 m/min -Drive 400 V/1.2/1.8 kW -Feed speed of the saw blade hydr. infinitely controllable -Coolant equipment -Supplusion â roller duct 3000 mm -Rebuff â roller duct with measure 3000 mm -Space requirements approx. B 650 x H 1650 x T 900 mm -Weight approx. 750 kg
Saw blade Ø: 425 mm Cutting range at 90° round: 145 mm Cutting area at 90° rectangle: 340 x 50 mm Cutting speed: 13 - 210 m/min Drive motor: 380 V, 1.3/2.6 kW Space requirement: 1000 x 950 x 1770 mm Weight: 810 kg
BRAND: ADIGE YEAR: 2010 MODEL: SYS LT COMBO APPLICATION TYPE: LASER CUTTING LOCATION: BELGIUM MACHINE TYPE: LASER CUTTING MACHINES (CO2) AVAILABILITY: IMMEDIATELY Technical Information CONTROL UNIT BRAND: ROFIN MAIN DRIVE LASERPOWER: 3,5 KW LASER TYPE: ROFIN DC035 Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - MAX BAR LENGTH: 6500 MM - MAX. FINISHED PIECE LENGTH: 6000 MM - MINIMUM - MAXIMUM SECTION (ROUND) IN DIAMETER: 16 - 225 MM - MINIMUM - MAXIMUM SECTION (SQUARE): 16 X 16 MM - 160 X 160 MM - MINIMUM - MAXIMUM RECTANGULAR SECTION: 16 X 16 MM - 200 X 100 MM - MAXIMUM BAR WEIGHT: 200 KG/BAR OR 35 KG/M - MAXIMUM FINISHED PIECE WEIGHT: 100 KG - MAXIMUM LOAD CAPACITY OF THE TABLE (THICKNESS PLATE): 20 MM QUALITATIVE MACHINE BENEFITS: - GOOD CONDITION
saw blade diameter: 350 mm capacity 90 degrees: round: 110 mm capacity 90 degrees: square: 100 mm capacity 90 degrees: flat: 180x40 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Laser for cutting pipes and profiles ADIGE LT 722D is in good technical condition. By agreement, it is possible to see under the current. It can cut open and hollow profiles up to a length of 6500mm, with min. 10mm max. diameter 120mm. Automatic unloader for processing products with a length of max.: 4500 mm with the possibility of sorting products. Cooling equipment, extraction equipment, documentation for the machine. Regular service and prescribed maintenance. Operating hours Status 01/19/2024 – Computer: 87,001 h; High Voltage: 80.260 h; Counter: 81,444 Machine weight: 9000 kg Laser power: 2500 W Max. workpiece weight: 100 kg Pipe size max.:: D 140 mm Size of profiles min - max.:: 30x20 - 120x80 mm Automatic loader for processing bars with a length of max.: : 6400 mm Machine dimensions lxwxh: 10514x4600x2237 mm
Cutter with deburrer Adige TT640 cutter Adige ST660 deburring machine, The machine is in perfect condition and completely serviced. It has a new head motor, new jaw prisms and new ST660 chains among many other changed elements, it is ready for operation. Max cutting length with or without deburring: 1500 mm. Min/max diameter: - Round: 10 to 80 - Square: 10x10 to 70x70 - Rectangular: 15x10 to 80x70. Min/max cutting thickness: full bar 12 to 35 Min/max inlet length: 2500 to 6500 mm Min/max single cut output length: 50 to 1500 mm Cutting and planing output length min/max: 150 to 1500 mm Cutting head motor power: 400V 2V 1400/2800 rpm 3.5 kW
ADIGE TT640 automatic tube cutting machine Adige saw model TT 640. Straight cuts only, for steel or non-ferrous tubes with a diameter of 15 to 80 mm. Equipped with an automatic strap loader for bars up to 6m50. Unloading for lengths 2000mm max. In perfect working order. Delivery and installation possible
Description: Chassis number: R001571TO23 License plate: ,AC 22043 Logbook: YES CDP (Certificate of Property): NO IMPORTANT NOTE: This is a sale through a commission agent managed by Surplex. Following the award, the customer will receive from Surplex the invoice relating to the auction commission and the dismantling & loading cost (if applicable). Subsequently, after settling the previous invoice, they will receive the invoice for the award price (plus VAT if applicable) directly from the seller. All taxes and fees related to the sale will be borne by the winning bidder (e.g., cancellation of any encumbrances or mortgages, payment of property tax, inspection, fee of the Auto Practices Agency that will handle the process of deregistration of plates and vehicle documents). In some cases, Surplex will provide the name of the Auto Practices Agency where all administrative procedure ...
Round: from ? 12 mm to ? 80 mm Square: from 10 x 10mm to 70x70mm Rectangular: 80 x 60mm Full bar cutting: from ? 12 mm to ? 30 mm Max cutting lenght: 3.000 mm Min cutting length: 50 mm Max. tube Thickness: 3 mm Blade ?: 250 mm Blade Thickness: 2 mm Automatic Tube Charger