used AKYAPAK for sale

AKYAPAK ROUND BENDING MACHINE TYPE 90-10/3.0 MMIJ AS -Capaciteit 1050 x 3 mm -Electrically adjustable achterrol -Digital uitlezing -Roll Harde -Walsen Conisch -Bovenrol Wegdraaibare -Remmotor -Voetbediening -Noodstop -Documentatie -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (1 km from the German border)

Machine Type: 3-Roll Round Bending Machine Manufacturer: AKYAPAK Type: ASMY140x2100 Year of construction: 2005 Condition: used / good Offer will only be sent if a complete imprint is provided! Location Warstein , Germany Reference MV-KÖL-0424-4 DESCRIPTION We offer you a used round bending machine from the manufacturer AKYAPAC. Roller diameter 140mm Bending length 2100mm Sheet thickness 4mm further data on request. Availability: by arrangement Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions and payment terms. Errors in the descriptions and offers are excepted

Profile Round Bending Machine APK 240 Manufacturer: Akyapak YEAR: 2015 Reel... 550mm Drive... Hydraulic Main engine power ... 30kW L x W x H ... 2240 x 3360 x 2055mm Machine weight ... 17500kg

Working width: 1050 mm sheet thickness: 1.5 mm top rollers Ø: 70 mm bottom rollers Ø: 70 mm weight: 320 kg space requirement: 700 x 1300 x 1100 mm

Max tube diameter 76 mm Max thickness 3 mm Max bending degree 180 Bending radius max 260 mm

Power : 30 Kw Rolls diameter : 550 mm Shaft diameter : 240/220 mm Bending speed : 0-7 m/min

RING BENDING MACHINE AKYAPAK TYPE AKBEND APK 30 - Asdiameter 30 mms - Draait on the right en linksom - Horizontaal/verticaal te gebruiken - Voetbediening - Noodstop - Documentatie - 400 V PRICE IS plus a VAT DUTCHMACH metal processing machines ENSCHEDE - the NETHERLANDS (1 km of the German border)

table diameter: 900 mm table load: 1.000 kg Frontal Loading Center (A): 150 mm Side Loading Center (B): 150 mm Rotating speeds: 0,1 - 1,1 UpM T-slots: 6 x M16 Tilt Angle: 90-180-105 ° Tilting Speed: 30 sn min./90° weight of the machine ca.: 930 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

I - beam section - flat steel: 120 x 30 (d600) mm I-beam section - upend: 100 x 20 (d2100) mm L-beam: 80x80x8 (d2000) mm bar material - diameter: 60 (d1000) mm tube diameter: 100 x 3 (d3000) mm square material: 50x25x2 (d600) mm total power requirement: 5,5 kW weight of the machine ca.: 1500 kg dimensions of the machine ca.: 1240 x 1375 x 1540 mm Furnishing: - hydraulic roller drive - Planetary gear delivery of the 2 lower rollers - for extra small bending radii - hardened tool holder (42CrMo4) - Standard roller set, hardened - Hydraulically adjustable side straightening rollers - mobile control panel - 3 powered rollers - Digital display - Machine can be used horizontally and vertically - CE mark / declaration of conformity - User manual in German Special accessories included in the price: - hydraulic side roller adjustment The data for this ad was created with ModulMWS - the software ...

I - beam section - flat steel: 80 x 15 (d600) mm I-beam section - upend: 60 x 10 (d800) mm L-beam: 45 x 5 (d600) mm bar material - diameter: 35,0 (d700) mm tube diameter: 60 x 2,0 (d1000) mm square material: 45x45x3,0 mm total power requirement: 2,25 kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: 780 x 950 x 1450 mm - higher speed 6.6m/min - l-steel flat 80x15 (d600)mm - l-steel on edge 60x10 (d800) mm - Angle steel 45x5 (d600) mm - Solid material Ø 35.0 (d700) mm - Pipe diameter max. 60x2.0 (d1000) mm - Square material 45x45x3.0 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mm plate thickness: 40 mm pre-bending: 32 diameter of upper rolls: 460 mm diameter of lower rolls: 420 mm side roll diameter: 360 mm power capacity: 30 kW min. bending diameter: 1380 mm weight of the machine ca.: 30,1 t dimensions of the machine ca.: 6,3 x 2,3 x 2,6 m 4 Rolls Hydraulic Bending Machine Standard Features: - hardened and polished rolls - complete body made of ST-52 steel - hydraulically opened/closed drop end controlled from control panel - digital readout for side rolls - top and bottom rolls are driven by hydraulic and gearbox. Bottom rolls vertical movements are hydraulic powered - separate control panel - oil cooler - conic bending - in accordance to CE-norm Optional Accessories: - variable speed of rotation (5.325 Euro) - material feeding table (3.896 Euro) - center support (12.058 Euro) - 2 x side supports (11.258 Euro) The data for this ad was cre ...

table diameter: 960 mm table load: 3,5 t swivelling range: 0 - 110° deg. table rotating: 360° deg. table turning speeds: 0,1 - 0,9 U/min height adjustment: 1070 - 1800 mm table drive: 1,5 kW hydraulic motor: 1,5 kW total power requirement: kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2,35 x 1,35 x 1,80 m Hydraulic Welding Positioner - Adjustable rotating speed - Remote controller with 5 meter cable length - Digital speed indicator on the controller panel for monitoring rotation - Mechanical angle indicator (for tilting) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mm plate thickness: 100 mm pre-bending: 86 diameter of upper rolls: 750 mm diameter of lower rolls: 700 mm side roll diameter: 600 mm power capacity: 132 kW min. bending diameter: 825 / 2750 mm weight of the machine ca.: 80 t dimensions of the machine ca.: 8,0 x 3,1 x 4,1 m 4 Rolls Hydraulic Bending Machine Standard Features: - hardened and polished rolls - complete body made of ST-52 steel - hydraulic powered cover for easy material extracting - 2-axis digital readout for side rolls - top and bottom rolls are driven by hydraulic and gearbox. Bottom rolls vertical movements are hydraulic powered - separate control panel - oil cooler - conic bending - in accordance to CE-norm Optional Accessories: - variable speed of rotation (9.261 Euro) - material feeding table 1000 x 2000 (4.608 Euro) - center support (25.459 Euro) - 2 x side supports (15.796 Euro) The data for this ...

table diameter: 1300 mm table load: 7,0 t swivelling range: 0 - 110° deg. table rotating: 360° deg. table turning speeds: 0,1 - 0,9 U/min height adjustment: 1040 - 1740 mm table drive: 2,2 kW hydraulic motor: 2,2 kW total power requirement: kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: 2,80 x 1,55 m Hydraulic welding rotating and tilting table. - Adjustable speed - Remote control with a cable length of 5 meters - Digital speed display on the control panel for monitoring the rotation - Motors with brakes - Mechanical angle display (for tilting) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mm plate thickness: 50 mm pre-bending: 40 mm total power requirement: kW weight of the machine ca.: 40 t dimensions of the machine ca.: 6,7 x 3,0 x 3,0 m 4-ROLL Hydraulic Plate Rolling Machine Working length 3100 mm Maximum thickness Pre-bending 40 mm Bending 50 mm Yield Point: 240 N/mm2 Number of rolls 4 Motor Power 55 kW Min. diameter mm - Ø Top Roll Diameter x 3 Top roll Ø 540 mm Bottom roll Ø 510 mm Side roll Ø 440 mm Length 6700 mm Height 3000 mm Width 3000 mm Weight 40.000 kg With: Cone bending device Induction hardened rolls Digital readout for side rolls Fully welded steel (St-52) frame Separate moveable control panel Dual bending speeds Electronic Parallelism All rolls are mounted in spherical roller bearings Hydraulically opened/closed drop end controlled from control panel Activation of cone rolling function and position adjustment via buttons on the  ...

table diameter: 1525 mm table load: 5,0 t swivelling range: 135° deg. table rotating: 360° deg. table turning speeds: 0,05 - 1 U/min height adjustment: mm table drive: 1,5 kW total power requirement: kW weight of the machine ca.: 2,6 t dimensions of the machine ca.: 1,80 x 1,54 x 1,20 m Adjustable rotating speed Remote controller with 5 meter cable length Digital speed indicator on the controller panel for monitoring rotation Welding – chassis mechanism Mechanical angle indicator (for tilting movement) Motors with brake & forced fan cooling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

I - beam section - flat steel: 50 x 10 mm I-beam section - upend: 80 x 15 mm I-beam section - upend: 80 x 15 mm L-beam: 50 mm round material: 30,0 mm bar material dia. max.: 1 1/2 mm bar material - diameter: 30,0 mm weight: 185 kg range L-W-H: 670 x 530 x 1350 mm square material: 40 x 40 x 3 mm pipes: 60 x 2,0 mm total power requirement: 0,75 kW Equipment: • Base frame of the machine • Foot switch • Standard-rolls (divided) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Shaft diameter: 30 mm Foot pedal control Extra roll sets incl.

Akyapak AHS 8/10x2100 4 rolls plate rolling machine Machine is in good working condition

Akyapak AHS 25/13 4 rolls Plate Rolling Machine Side supports Lifting system

Akyapak ABM 38 CNC Tube Bending Machine Machine has been revised in 2019 Without tools Maximum thickness : 2 mm Bending degree Max : 180 Bending Radius Max : 150 Feeding Speed : 1000 mm/sec Max Rotation Speed : 200 degree/sec Bending speed : max 90 degree/sec

Working length : 2000 mm Maximum thickness : 10 mm Machine is in good condition http://www.akyapak.tr/kataloglar/01-Bending(TR-EN-Web).pdf

Akyapak APK 240 Profile Pipe Bending Machine Tools are included Machine is in good working condition

Akyapak 38 3D Tube and Profile Bending Machine 16,25 and 30 mm tools are included

Akyapak AHS-10/14x3100 Hydraulic Plate Rolling Machine Machine is in good condition

Akyapak AHS 20/16 4 Rolls Plate Rolling Machine Max thickness : 20 mm Working length : 2100 mm

Machine has been purchased for a project It has been used for bending 1500 Ton in 3 years Maximum thickness of material machine bending is NPI220, generally it is used between 180-200 Rolls diameter : 660 mm Power : 37 Kw Shaft Ø mm : 280/260 mm Bending Speed : 7 m/min

Working length 2050 mm Maximum sheet thickness 4 mm Roller diameter 140 mm

Akyapak APK 121 Profile Bending Machine Machine is in very good condition Machine has pulling tool Max. section modulus cm3 : 120 Motor Power : 15 KW Rolls diameter : 390 mm Shaft diameter : 120 mm Bending speed : 6m/min

Akyapak APK 61 Profile Bending Machine Machine is in good condition

Akyapak APK 101 Profile Bending Machine Machine is in good condition

Akyapak APK 81 Profile Bending Machine All maintenance has been done recently Machine is in good working condition

Akyapak ABM 76-4 Pipe Bending Machine Maximum tube outside diameter : 76 mm

Akyapak ABM 38-3 Tube Bending Machine Max. Tube Outside Diameter : 38 mm Maximum thickness : 2 mm Bending Degree Max : 180 Degree Number of bending machine did is approximately 50.000 Diameter of tools : 13 mm, 19mm, 22 mm Machine is in good condition

Akyapak ABM 76 CNC Tube Bending Machine Machine never used Max. tube Ø : 76 mm

Akyapak APK 121 Profile and Pipe Bending Machine All tools are included Shaft diameter : 120 mm Bending speed : 6 m / min Motor power : 11 Kw

Akyapak 38 mm tube bending machine Max. tube diameter : 38 mm Tools are included(10 pieces)

Sheet thickness: 6,00 mm Bending length: 2000 mm Number of rolls: 3   MACH-id    5393 MAKE         AKYAPAK TYPE          ASM-S YOP            1999 SPECIFICATIONS Rolling width        2000 mm Rolling thickness 3  x toproll Ø       6 mm Rolling thickness 5  x top roll Ø      8 mm Rolling thickness prebending       4 mm Top Roll Ø       170 mm Bottom Roll  Ø  170 mm Side roll  Ø        150 mm Number of rolls     3 Rolling speed 4,8 m/min Power        4 kW DIMENSIONS Length       4000 mm Width         1300 mm Height        1 ...

Sheet thickness: 10,00 mm Bending length: 2000 mm Number of rolls: 4   MACH-id     5331 MAKE          AKYAPAK TYPE             AHS / 4 YOP                2008 SPECIFICATIONS Control       Conventionel Hydraulic / Mechanical        Hydraulic 3 or 4 roll        4 roll Maximum sheet thickness         10 mm Bending length        2100 mm Max. Rolling capacity Ø 2.500         10 mm Max. Prebending capacity Ø 2.500     8 mm Top Roll Ø       210 mm Bottom Roll Ø      190 mm Side Rolls Ø         170 mm Working speed M/Min.4 M/min. DIMENSIONS  ...

Length: 2600 mm Roll diameter: 10 mm Axial travel: 0 mm Make Akyapak 10 mm Type AHS 2600 Year 2004 4 walzen rundbiegemaschine akyapak 2600 x 10 Sheet thickness (mm) Bend T = 10 mm Bending length (mm) Pre T = 8 mm Number of rolls 4 roller Diameter = 210 / 190 Power = 7.5 kW Speed = 4 M / Min

Sheet thickness: 16,00 mm Bending length: 2100 mm Number of rolls: 4   AKYAPAK - AHSY 270 x 2100 Hydraulic 4 roll plate bender 2100 x 16 mm MACH - ID 6289 Make: AKYAPAK Type: AHSY 270 x 2100 YOP: 2008 Rolling width    2.100 mm Rolling thickness 3x toproll Ø     16 mm Rolling thickness 5x toproll Ø     20 mm Rolling thickness prebending      13 mm Top Roll Ø     270 mm Bottom Roll Ø       250 mm Side roll Ø       210 mm Number of rolls     4 Rolling speed       1-6 m/min Power     11 kW Dimensions Length    4.800 mm Width     1.800 mm Height    1.800 mm Weight    7.000 kg