Model
(Manufacturer: ALZMETALL)
bore capacity in steel (diameter): 34,0 mm throat: 300 mm bore stroke: 160 mm morse taper: 4 MK table:: 615 x 430 mm bore capacity in cast iron: 40,0 mm threading: 24 in ST M threading: 30 in GG M turning speeds: 100 - 1.800 U/min feed: 0,1-0,2-0,3-0,4 mm/U total power requirement: 1,4 / 2,2 kW weight: 470 kg height of the machine: 1865 m Furnishing: - Electromagnetic feed clutch - with overload protection and electrical cross-handle switch - Lockable main switch - Motor protection switch - Mushroom pushbutton (latching) for EMERGENCY STOP, in the front panel - Infinitely variable speed adjustment - Digital speed display - Protection class IP 54 - Spindle protection with electrical fuse - Motor insulation class F (155 degrees) - Operating instructions in German including special equipment: - LED machine light pos. 12. - Thread cutting device pos. 20.0 (Thread c ...
Boring power: 32.0 mm bore capacity in cast iron: 35.0 mm morse taper: MK 3 spindle stroke: 160 mm throat: 293 mm column diameter: 115 mm table:: 400 x 500 mm turning speeds: 125 - 1050 U/min total power requirement: 0.55 / 0.80 kW weight: 200 kg range L-W-H: 625 x 950 x 1840 mm from a training workshop maintained condition () Furnishing: - V-belt operated column drilling machine - adjustable drilling depth stop - manual spindle feed via cross handle - Work table with 2x T-slots - Pole-changing drive motor - Table height adjustment via hand crank - Connection cable including 16A plug Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9103747 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 40 mm : M 24 : M 30 : MK 3 bore stroke: 120 mm throat: 293 mm column diameter: 115 mm : 514x360 mm : 2 x 14 x 224 mm : 117/701 mm spindle turning speed range: 160-2.250 UpM height of the machine: 1840 mm total power requirement: 1,45/1,9 kW weight of the machine ca.: 285 kg Standard equipment: - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for right-left rotation - Motor protection switch - Speed adjustment stepless - Speed display digital - Feed overload protection - Protection IP 54 - Connector (fully assembled, cable length 2 m) - Spindle protection with electrical protection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Drilling capacity: 32 mm Throat: 0 mm Spindle taper: 150 MACH-id 5460 MAKE Alzmetal TYPE Alzrapid 32 YOP 1998 SPECIFICATIONS Max. drill Ø steel 32 mm Max. drill Ø cast 40 mm Max. tap Ø 24 M Arm Length 725 mm Stroke pinole 150 mm Throat 400 mm Spindle Taper 4 ISO/Bt/Mk Speeds / ranges 3000 Rpm Table Length 1175 mm Table Width 525 mm Power 3 kW DIMENSIONS Length 2600 mm Width 2000 mm Height &n ...
Drilling capacity: 40 mm Throat: 870 mm Spindle taper: 0 SPECIFICATIONS Drilling capacity steel Ø 35 mm Drilling capacity cast iron Ø 40 mm Tapping MM 25 Spindle taper Mk Mk 4 Spindle diameter Ø 60 mm Spindle travel 180 mm Max. distance spindle - table 80 mm Min. distance spindle - table 870 mm Floor / table area 700 x 600 mm Power2.2 kW Spindle speeds / ranges 65 - 1750 VARIO Rpm DIMENSIONS Length 1200 mm Width 800 mm Height 2400 mm
Tapping capacity: 45 mm Drilling capacity: 45 mm Throat: 322 mm Tapping depth: 4 mm Pillar drillALZMETALL - AC 32 MACH-ID 7651 Make: ALZMETALL Type: AC 32 Year: 2007 Max. drill Ø steel: 45mm Max. tap Ø: 30M Stroke pinole: 180mm Throat: 322mm Column sleeve: 145mm Quill Ø: 46mm Spindle Taper: 4ISO/Bt/Mk Speeds / ranges: 5000Rpm Table Length: 500mm Table Width:&nb ...
Length: 800mm, width: 600mm, height: 2000mm, weight: 825kg.
Drilling capacity steel/ cast iron: 35/45mm, length: 1100mm, width: 600mm, height: 2050mm.
distance spindle /table:min /max 190 / 570 mm distance spindle /table:190 - 570 mm surface area:650 x 300 mm Boring power:in GG 20 40 mm bore capacity in steel:ST 60 32 mm turning speed range::50 - 5000 UpM total power requirement:2,2 kW threading:GG 20 M30 threading::ST 60 M 24 weight of the machine ca.:1400 kg table load:max. 150 kg table height:770 mm traversing speed:max X-, Y- u. W-Achse 5 m/min max. traversing speed:Z-Achse 3 m/min w-axis:380 mm workpiece height max.:495 mm tool changing time:ca. 3 sec x-travel:450 mm y-travel:300 mm z-travel:180 mm workpiece weight:1,5 kg
Description: Speed range: 130 - 1750 rpm Table dimensions: approx. 500 x 370 mm tool taper: MK3, weight approx.: 1,200 kg, Approx. Onsite Dimension. (l x w x h): 900 x 630 x 1,900 mm
Description: Machine number: 627/3 Speed: 55 - 1450 rpm Table dimensions: 620 x 460 mm With vice Jaw width: 110 mm Drilling depth: up to 180 mm weight approx.: 300 kg, Approx. Onsite Dimension. (l x w x h): 1,100 x 700 x 1,900 mm
Description: Serial number 18067 Includes 2nd clamping table approx. 400 x 380 mm turning speed range: 30 bis 3000 rpm, table surface area l x w : 500x370 mm, weight approx.: 600 kg, Approx. Onsite Dimension. (l x w x h): 900 x 750 x 1,900 mm
Bench drill, stand drill, pillar drill, pillar drill -Manufacturer: Alzmetall, bench drill type AX2-T/S with base -Clamping table: 255 x 255 mm -Travel: 335 mm -Spindle holder: MK2 with drill chuck -Projection: 250 mm -Speed speeds: 125 - 2400 rpm continuously -Column: diameter 90 mm -Spindle stroke: 100 mm -Thread cutting device -Dimensions: 1000/700/H1740 mm -Total weight: 196 kg
Drill, pillar drill, column drill, column drill -Manufacturer: Alzmetall, pillar drilling machine type AB5/S -Engine: VKS 3 kW -Speed: 40 - 800 rpm, continuously variable right-left rotation -Feed: 0.1 - 0.14 - 0.2 - 0.28 - 0.4 mm/rev. -Table size: Ø 500 mm, travel 470 mm -Spindle holder: MK5 -Spindle stroke: 240 mm -Projection: 380 mm -Column Ø: 220 mm -Dimensions: 1450/680/H2160 mm -Weight: 1262 kg
Drill press, drill press, stand drill, pillar drill -Table size: 400 mm -spindle taper: MK4 -Projection: 320 mm -Speeds: 80-700 rpm -Columns: Ø 160 mm -Spindle stroke: 175 mm -VIP transmission -Feed: 0.09-0.28 mm/rev -Tachometer: defective -Dimensions: 1100/500/H1960 mm -Weight: 650 kg
Drill press, drill press, pillar drill press, pillar drill press, tapping machine, tapping machine -Manufacturer: Alzmetall, column drilling machine type AB3ES -Motor: 0.9/1.3 kW -Speeds: 65 - 1750 rpm, infinitely variable -Table size: 300 x 400 mm, travel 550 mm -Spindle mount: MK3 -Spindle stroke: 165 mm - Projection: 290 mm -Columns Ø: 115 mm -Dimensions: 900/560/H1840 mm -Weight: 336 kg
Drilling machine, pillar drilling machine, pillar drilling machine, pillar drilling machine, tapping machine, thread cutting machine -Manufacturer: Alzmetall, column drill type AB 3 ESV -Motor: Loher 1.5 kW -Speeds: 110 - 1450 rpm, continuously right-left rotation -Feed: 0.1/0.2/0.3 mm/rev. -Table size: Ø 370 mm, travel 735 mm -Spindle mount: MK3 -Spindle stroke: 170 mm -Throat: 280 mm -Column Ø: 130 mm -Dimensions: 940/650/H1830 mm -Weight: 398 kg with pallet
Drilling machine, pillar drilling machine, pillar drilling machine, pillar drilling machine, tapping machine, thread cutting machine -Manufacturer: Alzmetall, column drill type AB45/S -Motor: 3.3/4.1 kW -Speed speeds: 60 - 1530 rpm, continuously variable -Feed: 0.15/0.2/0.3/0.36 1/rev. -Table size: 450 x 600 mm, travel 640 mm -Spindle mount: MK4 -Spindle stroke: 180 mm -Throat: 350 mm -Columns Ø: 200 mm -Dimensions: 1050/720/H2000 mm -Weight: 728kg
This 5-axis ALZMETALL GS600E was manufactured in 2015. Key features include a Heidenhain TNC 640 control system, 18,000 rpm spindle with HSK A63, and cutting-edge chip conveyor for impeccable coolant cleaning. Its fitted with tool measuring via laser and a working probe for higher accuracy. The machine offers extensive production capabilities with its automatic door and air sealing for the linear measuring system, ensuring efficiency. This machine represents exceptional value for precision machining needs. Contact us for further details regarding this ALZMETALL GS600E universal machining center.
This 5-axis ALZMETALL GS800/5-T universal machining centre was manufactured in 2015. It boasts advanced technology including Heidenhain TNC 640 control, 30,000 rpm capability with HSK A63, and high precision packages ensuring remarkable exactness up to TP 0.005mm for X, Y, Z axes. Enhanced features like dynamic collision monitoring, tool measuring via laser and a robust security compound window combine to offer peak performance and safety. The ALZMETALL GS800/5-T machine we have for sale is equipped to increase productivity and precision in complex machining tasks. For more information about this ALZMETALL GS800/5-T universal machining centre, please reach out to us.
Table drill, table drilling machine ALZMETALL type AX 3 T Fabr. No. 3826 Year of construction 1983 Drilling capacity 30 mm Spindle holder MK 3 - long quill Spindle speed 250 - 1600 rpm 5 steps projection 250 / 290 mm Pinol stroke 120 mm Table size 400 x 300 mm Distance spindle-table top max. 700 mm Column diameter 115 mm Motor power 0.75 kW Mains connection 380 Volt, 50 Hz - Spindle speed via 5 V-belt stages - Drill head height adjustment via hand crank approx. 450 mm (column extends downwards through the table top) - Emergency stop button quick-change drill chuck ALBRECHT 1-13 mm Space requirement L x W x H 900 x 600 x 1400 mm Weight 185 kg good condition; used
Column drilling machine ALZMETALL type AB 3 ESV Masch. No. 15967 Year of construction 1977 Drilling capacity 32 mm Spindle holder MK 3 - short quill projection 290 mm Pinol stroke 160 mm Table size 545 mm Column diameter 220 mm Spindle speed 55 - 1450 rpm infinitely variable Motor power 1 / 1.6 kW Mains connection 380 Volt, 50 Hz. - Spindle speed via 2 gear stages, 2 motor speeds and infinitely variable via variator gearboxes - Countershaft stage for high torque at low speeds - MK adapter from MK3 to MK4 - automatic feed 0.1 - 0.2 - 0.3 mm/rev - rotatable drilling table - Table height adjustment via hand crank - Machine foot with machined workpiece contact surface - Lighting for the work area Space requirement L x W x H 1150 x 650 x 2000 mm Weight 850 kg good condition; used
Column drilling machine ALZMETALL type AB 4 SV Masch. No. 14805 Year of construction approx. 1980 Drilling capacity 40 mm Spindle mount MK 4 - short quill Projection 340 mm Quill stroke 180 mm Table size 710 x 560 mm Column diameter 160 mm Spindle speed 30 - 765 rpm infinitely variable Motor power 2.3 and 3.4 kW pole switchable Mains connection 380 volts, 50 Hz spindle speed via 2 gear stages and infinitely variable via variator gear - Counter stage for high torque at low speeds - Spindle on/off via rotary switch or electric foot switch - Automatic feed 0.1 - 0.2 - 0.3 mm/U - Table height adjustment via hand crank - Machine foot with machined workpiece contact surface - LED lighting device Space requirement L x W x H 1200 x 725 x 2050 mm Weight 615 kg good condition; used