used AMADA for sale

This AMADA ENSIS-3015 AJ Fiber Laser cutting machine was manufactured in the year 2021 in France and has 15062 production hours, of which 6815 are cutting hours. It is equipped with an AMADA AMNC3i control unit. The machine has a laser power of 6,3 kW.

This AMADA ARIES 245 (1993) Punching machine was manufactured in 1993 in Croatia. This CNC Punch Press has a capacity of 200 kN (44093 lb) and 19 tools. It operates at 11 KVA power and weighs 7.5 tons (16535 lb). The power supply is three-phase with voltage options of 460/400/230/230 volts and frequencies of 60/50/60/50 Hz, with a trip current of 7.5/7.5/10/10 KA. Contact us anytime for further information.

This AMADA EUROPE 255 CNC Punching machine was manufactured in the year 2005 in France. It is equipped with a Fanuc Series 18i-PB control unit. The machine has a punching force of 220 kN.

This AMADA LC 2415 alpha 4 NT Laser Cutting machine was manufactured in the year 2011 in France and has 11750 production hours. It is equipped with an AMADA AMNC control unit. The machine has a laser power of 2,5 kW.

This AMADA EM2510NT Punching machine was manufactured in the year 2004.

This AMADA F0-4020NT CO2 Laser Cutting Machine was manufactured in 2005 in Japan. It is equipped with a 4 kW CO2 laser (FANUC, AF4000E). The axis travel range is: X = 4420mm, Y = 2050mm and Z = 200mm. This machine can operated with a max. worksheet weight (stand alone machine and with LST) of both 1570 kg. It is no longer under power, but all maintenance has been carried out annually and the machine is technically in perfect condition. Recently it has been professionally dismantled and is ready for dispatch. In total machine hours are at 37500. 5 inch and 7.5 inch lens holders are included. See photo gallery for more details. In addition, you will find a summary of all maintenance reports attached as PDF (German). Contact us anytime for further questions!

This AMADA LCV 3015 3KW + Automation/storage Laser cutting machine was manufactured in the year 1998 in Japan and has 69228 production hours, of which 7830 are cutting hours. It is equipped with a Fanuc FS16LB EXP control unit. The machine has a laser power of 3 kW.

This AMADA LC 1212 A3 Laser cutting machines machine was manufactured in 2005 in Japan and has 39506 production hours. It is equipped with a FANUC control unit. The machine has a laser power of 2,0 kW.

This Amada LC 2415 A3 Laser cutting machine was manufactured in the year 2002 in Japan. It is equipped with a Fanuc Series 160i-L control unit. The machine has a laser power of 2,0 kW.

This AMADA LC-2415 alpha III Laser Cutting machine was manufactured in the year 2004. It is equipped with a Fanuc FS-160iLA CNC control unit and has 3 axis. The machine has a laser power of 4,0 kW.

This AMADA LC3015X1NT 4kW Co2 (2007) Laser cutting machine was manufactured in 2007 in Netherlands. This machine has a 4.0 kW Co2 resonator and can accommodate sheets up to 3000x1500 mm in size. Contact us anytime for further information.

This Amada LCV3015B2 Laser cutting machine was manufactured in the year 1998 in Japan and has 69228 production hours. The machine has a laser power of 3,0 kW.

This AMADA LC-2415 A3 Laser cutting machine was manufactured in the year 1999 in Japan. It is equipped with a FANUC Series 160i-L control unit and a FANUC C-3000 D laser with 3kW laser power. The laser can cut 12 mm mild steel and 6 mm stainless steel. See tech specs (DE) as PDF attached.

This Amada HG-1703 Bending machine was manufactured in the year 2022 in France and has 6700 production hours. It is equipped with an AMADA AMNC3i control unit and has 10 axis. The machine has a pressing force of 1700 kN and bending length of 3110 mm.

This AMADA HFB 125 Bending machine was made in 1999 in France. It is equipped with an Amada Operatour control unit and has 8 axis. The machine has a bending length of 3000 mm.

This AMADA HFT 50-20 Bending Machine was manufactured in 2009 in France. It has a maximum press force of 500 kN, a maximum stroke of 200 mm and a foreseen power of 6 kW. In total is weighs 4.7 tons. This press brake has operated 11,377 hours so far. Check photo gallery for more details. Contact us anytime for further questions!

This AMADA HFT50-20 (2007) Bending machine was manufactured in 2007 in France. It is equipped with a bending force of 50 tons and a bending length of 2085 mm. Distance between uprights is 2665 mm and the vertical stroke at 200 mm. The machine counter shows 8337 hours.

Shear Amada GS 840 4100x8mm with thin sheet metal stand Brand: AMADA Model: GS-840 S/N: C 99 07 16 Year: 1999 Power: 15KW Weight: 11650kg Hydraulic vertical shear with variable angle. Control: AMADA PROMECAM Cutting capacity: 8mm carbon steel / 6mm inox Cutting length: 4050mm Degrees adjustment: 0,4º - 2,1º Cursa: 190mm Treaders: 21 Back stop: 1000mm Front table base: 700m Dimensions: 2040x4810x2210(h)mm Optional included: - Pneumatic support for thin sheet metal.

Punching machine in good condition. Model: VIPROS 2510K Manufactured: in Japan in 1998 Serial number: 25100014 Punching force: 196 kN Capacities: 1250 x 2500 1250x5000 3-station turret Number of tools: 31 Weight: 11000 kg 3 security cells Liquid cooling If you have any questions, please do not hesitate to contact us. The punching machine is still powered on and can be tested if necessary.

Hydraulic press brake: AMADA type HFBO 100-3100, rb: 1996, one of the best models from the best manufacturer of this type of machines. Bending length: 3100 mm; Between columns: 2650 mm, Loading: 300 mm, stroke 200 mm; Pressure: 100 t. CNC-controlled Operateur OPEII press, graphics, Polish language, 14 color TFT screen. Controlled axes -Y1-Y2-X1-X2-R1-R2-Z1-Z2 + automatic table bending compensation. Machine weight 7.9 tons. Drives 9 kW. Tools - set, Amada standard segment tools. Full original operation and maintenance manual, instructions for the machine and control in English. Polish, BiHP job manual in Polish.

Description: Serial number: 20510020 Working hours according to the counter: 4139 Working table: 3050x1526 mm , CNC Control LC20 Travels: , X-axis: 3050 mm Y-axis: 1526 mm Cutting capacity: , Normal steel ST 44: 20 mm Stainless steel (1.4301) with N2: 12 mm Aluminium 5052: 10 mm Cutting speed: 0-30 m/min Traverse speed: , X-axis: 85 m/min , Y-axis: 85 m/min Z-axis: 60m/min Installed power: 71 kva Installed chiller power: 25kva Automatic pallet changeover: , Max. sheet size: 3000x1500 mm , Max. plate weight: 730 kg Standard pallet changeover No. of pallets 2 (2007) Pallet changeover time 15sec Resonator: , Model 40CFX , Max. continuous power: hp 4000watt Peak Power: 5000watt Polishing Frequency: 5-3000 hz The machine was working till february 2024,  ,was dismantled by AMADA and now is stored laser capacity: 4 k ...

Description: Maximum tonnage: 1000kN CN AMNC 4 AXES Equipped with high speeds bending length 3110mm Clearance between uprights 2705mm Gooseneck depth 420mm Motor power 17kW Maximum stroke: 200mm throat: 420 mm, Max. pressing force: 10 to, bending length: 3,110 mm, number of controlled axes: 4, total power requirement: 17 kW, weight approx.: 15,000 kg, Approx. Onsite Dimension. (l x w x h): 4,500 x 2,000 x 2,700 mm

Description: 125 tonne power Total bending length 3100 mm Distance between uprights 2705 mm Gooseneck depth 420 mm Motor power 11 kW Apron travel mm 200 OPERATOR digital control. 3 axes Y X1 X2. New tooling line weight approx.: 6,600 kg, Approx. Onsite Dimension. (l x w x h): 3,800 x 2,090 x 2,635 mm

Description: 100 ton power Total bending length 3,100 mm Distance between uprights 2,705 mm Gooseneck depth 420 mm Motor power 11 kW Apron travel 200 mm 7 axes Y1 Y2 X1 X2 R Z1 Z2. CNC OP 2000. Sick' gate weight approx.: 6,500 kg, Approx. Onsite Dimension. (l x w x h): 3,800 x 2,090 x 2,635 mm

Description: YOM 2011 Serial Number: 012 Resonator: AMADA FANUC AF4000i-B Maximum power: 4kw Working Hours: 32.000 approx Control AMNC-F Travels: X:3070 mm Y:1550 mm Z: 200 mm Material thickness: Iron 20 mm Stainless steel 16 mm Aluminium 10 mm No. of pallets: 20 Gas control: Automatic Max. piece weight: 840 kg Spindle speed: X: 114 mm Y 114 mm Z: 60 mm Cutting speed: X, Y 0 to 20 m/min Power requirement: 82 kva 400v (50 hz) resonator included Air requirement: 1420 l/min (machine only) Includes: Pallet changer, ,Dust collector and Chiller , Machine dimensions: , Machine 9903x2778x2200 (exc. Pallet changer, ,Dust collector and , chiller) , , weight approx.: 20,000 kg, Approx. Onsite Dimension. (l x w x h): 11,500 x 5,130 x 2,350 mm

Description: Serial  , ,Number: 4558175 Working Hours: 31500 Turbine new Laser power: 4,0 kw Working Range: X: 2520 mm Y: 1550 mm Z: 300 mm Table loading capacity: 330 kg , Machine was dismantled by AMADA and now is stored , table length: 2,520 mm, table width: 1,550 mm, laser capacity: 4 kW, weight approx.: 7,700 kg, Approx. Onsite Dimension. (l x w x h): 57,545 x 2,630 x 2,789 mm

Description: Nominal force: 1 700 kN Beam width: 4 230mm Table width: 180mm Work surface height: 960mm Inlet: 450mm Actuator travel: 180mm Goose neck: 410mm Distance between end plates: 3760mm Max. pressure: 308 Bar Oil content: 150L Number of cycles: 4 Motor power hating: 11KW Pump activity: 20,7 n3/rev. Approachspeed: 100mm Working speed: 1>, 8 Retract >,80 throat: 410 mm, bending length: 4,230 mm, stroke: 180 mm, stroke speed -forwards: 100 mm/min, table surface area l x w : 4320x180 mm, total power requirement: 11 kW, weight approx.: 12,500 kg, Approx. Onsite Dimension. (l x w x h): 5,500 x 2,400 x 2,920 mm

Description: Serial number 44731012 , Cutting capacity round material diameter: 4006 mm , Square material cutting capacity: 400 x 400 mm , Maximum loading capacity of the machine: 2500 kg , maximum loading capacity of the roller conveyor: 2000 kg/m Minimum remaining workpiece length to ensure the clamping wheel of 10 mm: 76 mm , Minimum workpiece width for detection: 30 mm weight approx.: 3,000 kg, Approx. Onsite Dimension. (l x w x h): 9,000 x 2,400 x 2,000 mm

Description: Serial number 555123 minimum outside diameter of the workpiece 100 mm , maximum outer diameter of the workpiece 480 mm , maximum length of the workpiece 11.5 m total power requirement: 7,5 kW, weight approx.: 5,500 kg, Approx. Onsite Dimension. (l x w x h): 12,000 x 4,000 x 2,700 mm

Description: Machine Specifications: Max. Sheet Dimensions: 5040 x 1550 mm Max. Sheet Weight: 330 kg Max. Slide Stroke (X): 2520 mm Max. Stroke of Laser Head (Y-Axis): 1550 mm Max. Stroke of Laser Head (Z-Axis): 300 mm Max. Cutting Speed X and Y Axis: 20 m/min. Speed Rapid Transport X: 80 m/min. Speed Rapid Transport Y: 80 m/min. Speed Rapid Transport Z: 60 m/min. Positioning Accuracy: ± 0.01 mm/500 mm Repeatability: ± 0.005 mm Table Height: 820 mm Part Door Dimensions: 550 x 1550 mm Power Supply Voltage: 200 V (± 10 %) AC Mains Frequency: 50/60 Hz (± 1 Hz) Installed Power: 10 kVA, 3 phases Compressed Air Supply (Cutting Gas): 1000 l/min. Compressed Air Supply (No Cutting Gas): 250 l/min. Dimensions (LxWxH): 2500 x 5654 x 2275 mm Type ,Numerical Control: FANUC FS-160iLA Controlled Axes:  ,X, Y, Z (3 axes controlled simultaneously) Programming Metho ...

Description: Serial Number: 097 Working details: , Working Area: , X: 3070 , Y: 1550 mm , Axis displacement ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  , X: 3420 , Y: 1550 , Z: 200 Cutting speed: X,Y: from 0 to 20 mt/min , Max. weight on the table: 840 kg , Assist gas control: Automatic , Max. working height: 840 mm , Weight of machine: Approx. 12.000 kg (excl. dust collector, cooler and changeoderver) , Power requirement: AC 200/220V ±10% 50/60Hz 27 Kva (excl. dust collector, cooler and pallet changer) , Laser  , Model: AF 4000 i-B Maximum Power 4,000w Frequency: 5 to 2000hz Laser Type: Co2 Circular Polarisation , Laser gas consumption Approx. 10 lit./min. Cooling water flow 160 lit./min. Power requirement AC 200/220V ± ...

Description:  , , ,Serial Number: 32510005 Technical Data Laser: Co2 laser Control: FANUC AF2000C Power: 2kw Technical data Punching machine: Working dimensions:  , 1500 x 2500 mm without repositioning , 1500 x 5000 mm with 1 repositioning. Force: 196 KN Power: 53kva Max. material weight: 280 kg Max. material thickness: , 6,4 ,mm Tool stations: 31 (tooling not included) Max. tool diameter: 88,9 mm Tool change time: 1,5 sec. Automatization ,system Included  , Serial Number: 835 Model: PR UL 300  , ,AP , YOM: 2004 Capacity: 3000kg Power: 5,5kw Stacking Area. 3 400 x 1 400 mm CE standard Note: Machine was dismantled by AMADA and now , is stored laser capacity: 2 kW, control: FANUC AF2000C, total power requirement: 53 kW, weight approx.: 20,000 kg, Approx. Onsite Dimension. (l x w x h): 8,320 x 4,203 x 2,773 ...

Metal band saw blade, band saw blade, metal saw band -Metal saw band: SG 2/3P x 0.9 unused -Length: 4115 mm -Weight: 1.2 kg

Clamping device table band saw, wood band saw, firewood saw, automatic band saw, material positioning, band saw rolls, band saw roll -Band saw roll: made of Amada HA-400 W metal saw -Diameter: 595 mm -Shaft: Ø 50 x 70 mm -Recording: M16 x 2 -Dimensions: Ø 595 x 193 mm -Weight: 51 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Spare part: hydraulic cylinder from Amada HA-400W metal saw -Piston rod: Ø 28 mm -Stroke: 585 mm -Admission piston rod: M30 x 1.5 -Dimensions: 835/70/H200 mm -Weight: 17.1 kg

Metal band saw, band saw machine, band saw, vertical band saw, horizontal band saw, hydr. Horizontal band saw machine, semi-automatic, band saw machine, horizontal band saw machine -Manufacturer: AMADA, horizontal band saw automatic band saw type HK-800 -Equipment: driven roller conveyor, stop system, -Saw drive: 5.5 kW -Cutting capacity flat: 90° 810 x 580 mm / 45° mm -Cutting capacity round: 90° 580 mm / 45° mm -Saw band speed: infinitely adjustable -saw band: -Coolant device: cooling water -Setting dimensions: 22000 mm/2000/H2410 mm -Transport dimension: 13 loading meters -Weight: kg

Folding length : 2000 mm 50 Ton Machine is in good condition

Amada LC 3015 X1 NT Laser Cutting Machine with automatic pallet changer CNC Control Unit : LC20BP2 Working area : 3000X1500X120 Power : 4000 WATT Maximum working weight : 750 KG Automatic pallet changer Dust collecting device is not included!

Amada HF 50-12T Press brake cnc/nc Amada HF 50-12T 2005r HF 50-12T

Hydraulic press brake: AMADA type HF 50-12, rb: 2002, a very durable model from the best manufacturer of this type of machine. Bending length: 1250 mm; Between columns: 1050 mm, Loading: 200 mm, stroke: 180 mm; Pressure: 50 t. CNC Operateur OPEII controlled press, graphics, Polish language, TFT 14 color screen. Axes controlled -Y1-Y2-X-R1-R2 + automatic compensation of table bending . Weight of the machine 3.1 t. 6 kW drives. Fiessler laser protection of the workspace. Tools - complete, segmented tools of Amada standard. Fast machine for making a large number of parts. Full original DTR, instructions for the machine and control in Polish, a workstation manual BiHP in Polish.

20 Ton 2500 mm x 1250 mm Machine is full revised Metalix Cam program Machine is in good condition

Hydraulic press brake: AMADA type HFB-O 2206, rb: 2000, a very durable model from the best manufacturer of this type of machines Operateur OPE II control - 8 controlled axes, visualization, Polish language Tools - a set of new tools - 4-slot die + punch, new adapters with clamps, Amada standard segment tools.

Pega 244 punching machine year 1987 still in production well maintained complete with automatic loading and unloading mod. MP1020

Hydraulic press brake: AMADA type HFP 1000-30 Network Technology, rb: 2005, top model of the best manufacturer of this type of machine. Dual speed X,R and Z axis. Opening of 550 mm. Long stroke increased to 350 mm Bending length: 3100 mm; Between columns: 2650 mm; Loading: 350 mm; Pressure: 100 t CNC controlled press Amada AMNC PC, 3D graphics, Polish language, TFT screen 15 color. Axes controlled -Y1-Y2-X1-X2-R1-R2-Z1-Z2 + automatic compensation of table bending . Weight of the machine 7.5 t. 9 kW drives. Fiessler lasers. Machine complies with the CE Machinery Directive. Tools - complete, segmented tools. Full original DTR, instructions for the machine and control in Polish, health and safety manual in Polish.

BREAKING FORCE: 196 KN MAX SHEET THICKNESS: 3 MM X-AXIS MOVEMENT: 2500 MM Y AXIS MOVEMENT: 1270 MM NUMBER OF INDICATORS: 2 NUMBER OF POSITIONS: 31 STEEL: 3 MM STAINLESS STEEL: 2 MM ALUMINUM: 2 MM MAIN ELECTRICAL CONNECTION: 400V USED POWER: 24 KVA WIDTH MEASUREMENTS: 5330 MM DEPTH MEASUREMENTS: 5123 MM HEIGHT MEASUREMENTS: 2160 WEIGHT OF THE MACHINE: 11000 KG A copy of the software.

1.AMADA laser cutter FLC-3015 AJ with automatic material feeding and removal Shift type (X and Y axes) movable optics The type of control of the X, Y, Z axes as well as the B and CF axes at the same time Punching range X axis 3070 mm Y axis 1,550 mm Z axis 100 mm Punching speed X and Y axis 0 - 120 m / min The maximum weight of the material is 920 kg Drive type (X, Y, Z axes) Linear drive Table height 940 mm Machine dimensions (machine only) L x W x H 6043 x 2900 x 2350 mm Net weight 11,200 kg Year of production 2013 2.Laser resonator Model - AJ2000 Rated power 2000 W Resonator dimensions L x W x H 1760 x 1210 x 1530 mm Weight 800 kg 3.Herding DELTAComp 1500-8 / 9 SB 7.5 kW filter Weight 1200 kg 4.LKI MP Flexit 7 kW feeder Weight 4300 kg The number of electrified operating hours is 46,000 The number of working hours of the head operation  ...

AMADA EUROPE 245 turret press Technical data : - CNC control: FANUC 18 i-P - pressure: 20 Tons - max. 31 station non-recapture punching format: 1020 x 1290 (Y-10; Y1010 T2XX; Y-50; Y970 T3XX) - max. size of the cut sheet with interception: 1020 x 2540 mm - max. size of the cut sheet with interception + 1 turn (optional): 1500 x 2540 mm - max. sheet thickness on the ball table: 6 mm - max. sheet thickness on the brush table: 3 mm - max. permissible weight on the table: 100 kg - punching accuracy: +-0.1 mm - positioning accuracy: +-0.07 mm - number of clamps/pneumatic holders: 2 - number of axes controlled simultaneously: 3: X, Y, C - revolver speed: 25 rpm. - number of strokes per minute, distance 25.4 mm, cylinder stroke 6.5 mm: 220 strokes / min. - stroke punching, distance 1 mm, cylinder stroke 6.5 mm: 480 strokes / min. - minimum programmable increment: 0.001 mm - nu ...

Hydraulic guillotine - AMADA type GPX 630. Cutting length: 3100 mm x 6 mm, full CNC control. Variable angle of the knife and the gap between the knives, set by the computer after feeding the gr. and length of material. Sheet metal cutting in the range of 0.4 - 6 mm. CNC bumper departure 10 -1050 mm, retraction, programs. Machine with automatic support for long sheets of cut sheet metal at the back. Raised rear bumper. Machine weight 6.5 t. 2 supports and an angle bar at the front of the machine. The only guillotine on the market up to 6 mm, with such a low demand for electricity, the main motor only - 5.5 kW. Full original DTR in English and Polish, OHS manual in Polish. The machine is little used, the cutting knives are 95% sharp.

Hydraulic press brake: Amada type HFT 170-4, rb: 2002. Bending length: 4100 mm; Between columns: 3550 mm; Loading : 350 mm; Pressure: 170 t Stroke : 200 mm. AbPad CNC controlled press, LANGUAGE. POLISH, color, control new replaced at Amada in 2021. Protection of the workspace with Lasersafe lasers. Machine under current 20996 hrs. Axes controlled -Y1-Y2-X1-X2-R + automatic compensation of table bending. Machine weight 14.5 t. Drives 16.5 kW; Tools - Amady standard, complete,sectional . Full original DTR, BiHP stand instructions in Polish.