Inv. Num. : 7180 Type: ALLROUNDER 320 C 600 Producer: Arburg Created: 2008 Parameters: Distance between tie rods: 320x320 mm Clamping force: 500 kN Injection weight: 2300 kg
Inv. Num. : 7181 Type: ALLROUNDER 375 V 500 Producer: Arburg Created: 2012 Parameters: Duty cycle: 26913 h Hours: 17470 h Clamping force: 500 kN
Nv. Num. : 7150 Type: ALLROUNDER 275 V 250 Producer: ARBURG Generated: Parameters: Clamping force: 250 kN Height of clamping plate: 150-250 mm Ejector stroke length: 225 mm Opening the mold: 375-475 mm
Inv. Num. : 6315 Type: Allrounder 320 C 500 Producer: ARBURG Created: 2007 Parameters: Operating hours: 53.740 h Clamping force: 500 t Screw diameter: 30 mm Capacity oil container: 120 l Oil type: OPTIMA 32ZFP
Inv. Num. : 6248 Type: A 270S-350-60 Producer: Arburg Generated: 2001 Parameters: Operating hours: 47,000 h Clamping force: 35 t Screw diameter: 22 mm Injection capacity: 30 cm³ Injection mass: 27 g Maximum spray pressure: 2340 bar Min. mould height: 175 mm Equipment: Spares Technical documentation The machine has sealed hydraulic blocks. partial replacement of hydraulic hoses Integrated side transducer Integrated sorting flap
Article number: 27-06-304 Manufacturer: Arburg Very good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1985 L x W x H: approx. 2700x1200x1800mm Weight: approx. 930kg Closing side: Clamping force: approx. 250kN Holm dimension hxv: ca.221x0mm Plate size hxv: approx. 342x250mm Installation height min: ca.150mm Installation height max: approx. 300mm Plate spacing max: approx. 500mm Aperture travel: approx. 200mm Spray side: Screw diameter: approx. 22mm Displacement: approx. 38cc Injection pressure: approx. 1500bar Other accessories on request Price and other technical data on request
Arburg 270U-250-70 (221) Description General information SKU: (221) Availability: In stock Year of construction: 2005 Brand: Arburg Specifications Injection weight: 20 g Clamping force: 250 kN Stand: Used Screw diameter: 18 mm Injection pressure: 2500 bar Tie bar spacing: 270 x 270 mm Clamping plate size: 380 x 380 mm Tool installation height min.: 200 mm Control: Selogica Language: German Power: 35 kW Operating hours: 82,985 h Curmtbe2w8 Weight: 2100 kg Dimensions: 3m x 1.1 m Funnel: No Core Train: Yes Euromap: Yes
ARBURG 200 TON WITH ROBOT WORKING HOURS ARE PRESENT ON THE PHOTOS YEAR : 1999 TECHNICAL DATA: EUROMAP SIZE: 2000-675 CLAMPING FORCE: 2000KN SCREW 50mm closing force: 90 kn OPENING STROKE MAX 650mm I EXCELENT WORKING CONDITION, MACHINE IS WORKING DAILY PRODUCTION MACHINE IS AWAILIBLE IMEDIATELY WE ORGANIZE DISMANTLING LOADING AND TRANSPORT TO THE CUSTOMER
ARBURG 270 S 150-60 U ALLROUNDER MACHINE WAS FULLY SERVICED NOT LONG AGO WITH NEW SCREW TECNICAL DATA IN LIST -PHOTO EUROMAP 150-60
Now fully refurbished is this Arburg 420C 1000-350 injection moulding machine. This machine was manufactured in 2005 and is fitted with the ever-popular Selogica controller. It’s fitted with a 40mm diameter screw which gives a maximum shot weight (PS) 153g and single air blast. This machine comes with it’s own anti-vibration mounts and the original operators manual. Refurbished machines from STV Machinery undergo a comprehensive refurbishment procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on re ...
Clamping force: 130 t Year of construction: 1999 Injection weight in hp: 194 (hp) g Control type: Selogica Injection unit: .../350 Screw diameter: 45 mm Spec. Injection pressure: 1670 bar Spraying volume: 230 ccm Injection weight in hp: 194 (hp) g Hydr. Drive power: 22 kW L/D Screw Ratio: 18 Clamping unit: 1300/... Clamping force:: 130 t Size of clamping plates: 615 x 615 mm Lights spar spacing: 420 x 420 mm Ejector force: 40 kN Tool installation height: 250 mm Aperture travel: 500 mm Max. plate spacing: 750 mm Ejector travel: 175 mm General information: Fuel tank capacity OIL: 240 l Weight: 4100 kg Dimensions(m) LxWxH: 4.4 x 1.4 x 2.1 m
Clamping force: 60 t Year of construction: 2000 Injection weight in PS: 18 g Control type: Selogica Injection unit: .../150 Screw diameter: 15 mm Spec. Injection pressure: 2500 bar Spraying volume: 20 ccm Injection weight in PS: 18 g Clamping unit: 600/... Clamping force:: 60 t Size of clamping plates: 570 x 570 mm Lights spar spacing: 370 x 370 mm Tool installation height: 200 mm Aperture travel: 450 mm Max. plate spacing: 650 mm Ejector travel: 150 mm General information: Fuel tank capacity OIL: 150 l Weight: 3600 kg Dimensions(m) LxWxH: 4.0 x 1.2 x 2.1 m
Clamping force: 200 t Year of construction: 2001 Injection weight in PS: 117 g Control type: Selogica Injection unit: .../350 Screw diameter: 35/35 mm Spec. Spraying pressure: 2500/2500 bar Spraying volume: 127 ccm Injection weight in PS: 117 g Clamping unit: 200/... Clamping force: 200 t Lights spar spacing: 570 mm Aperture travel: 175 mm Max. plate spacing: 950 mm Ejector travel: 225 mm Other equipment: 2 x Core Pulls
Clamping force: 200 t Year of construction: 2006 Injection weight in PS: 72 / 45 g Injection unit: .../150 / 150 Screw diameter: 30 / 25 mm Spec. Spray pressure: 2000 / 2500 bar Spray volume: 77 / 54 ccm Injection weight in PS: 72 / 45 g Clamping unit: 200/... Clamping force: 200 t Size of clamping plates: 795 x 795 mm Lights spar spacing: 570 x 570 mm Tool installation height: 300 mm Aperture travel: 650 mm Max. plate spacing: 950 mm Ejector travel: 225 mm General information: Delivery Time: Natychmiast Dimensions(m) LxWxH: 5.50 x 2.08 x 2.45 m Equipment: 3 x Hydraulic Core Pull 4 x Air Valve 2 x Thermoregulators Snail: upper/vertical 30 mm Bottom/Horizontal 25mm
Clamping force: 160 t Year of construction: 2006 Injection weight in PS: 291 g Control type: Selogica Injection unit: .../800 Screw diameter: 45 mm Spec. Spray pressure: 2470 bar Spray volume: 317 ccm Injection weight in PS: 291 g Clamping unit: 160/... Clamping force:: 160 t Lights spar spacing: 520 mm Aperture travel: 175 mm Max. plate spacing: 900 mm General information: Weight: 7000 kg Dimensions(m) LxWxH: 5.5 x 1.8 x 2.1 m Other equipment: 2 x Core Pulls
We are a company dealing with international trade in used injection molding machines and peripherals. We specialize in the transport of machines up to 4500t clamping force and the relocation of industrial plants throughout Europe. Offered: Arburg Allrounder 220S 150-60 Clamping force: 15 t Production year: 1999 Injection weight: 14 (PS) g Injection unit: .../60 Screw diameter: 15 mm Specific injection pressure: 2330 bar Injection volume: 15 ccm Injection weight: 14 (PS) g Pump motor power: 5.5 kW Tool closure system: 150/... Clamping force: 15 t Distance between columns: 220 x 220 mm Opening distance: 275 mm Maximum plate distance: 425mm General data: Total installed power: 11 kW Oil tank capacity: 120 l Net price given. We invite you to our other auctions europnet.olx.pl, where you will find other peripherals and injection machines. www.europnet.eu
We are a company dealing with international trade in used injection molding machines and peripherals. We specialize in the transport of machines up to 4500t clamping force and the relocation of industrial plants throughout Europe. Offered: Arburg Allrounder 270S 350-60 Clamping force: 35 t Production year: 1999 Injection weight: 17 (PS) g Injection unit: .../60 Screw diameter: 18 mm Specific injection pressure: 2500 bar Injection volume: 20 ccm Injection weight: 17 (PS) g L/D ratio of screw: 24.5 Tool closure system: 350/... Clamping force: 35 t Distance between columns: 270 x 270 mm Ejector force: 30 kN Opening distance: 350 mm Maximum plate distance: 525mm Ejector stroke: 220 mm General data: Total installed power: 12.6 kW Oil tank capacity: 120 l Net price given. We invite you to our other auctions europnet.olx.pl, where you will find other periphera ...
Clamping force: 200 t Year of construction: 2002 Injection weight in PS: 72 / 45 g Control type: Selogica Injection unit: .../150 / 150 Screw diameter: 30 / 25 mm Injection volume: 77 / 54 ccm Injection weight in PS: 72 / 45 g Clamping unit: 200/... Clamping force:: 200 t Light tie bar distance: 570 x 570 mm Ejector travel: 225 mm General information: Weight: 8000 kg Dimensions (m) LxWxH: 5.1 x 1.8 x 2.2 m • 2 x hydraulic core pull • 1 x Air Valve Snail: Top/Vertical: 30mm Bottom/Horizontal: 25mm
Arburg Allrounder 320K 700-100 Parameter: Clamping force: 70 t Year of construction: 05/2004 Injection weight in horsepower: 65 g Injection unit: .../100 Screw diameter: 30 mm Spec. Spray pressure: 1390 bar Injection volume: 71 ccm Injection weight in horsepower: 65 g Hydr. Drive power: 11 kW Cylinder heating capacity: 5 kW Clamping unit: 700/... Clamping force:: 70 t Size of the clamping plates: 446 x 446 mm Lights tie bar distance: 320 x 320 mm Opening travel: 350 mm Max. plate spacing: 550 mm Ejector travel: 125 mm General information: Weight: 2250 kg Dimensions (m) LxWxH: 3.2 x 1.5 x 1.9 m Equipment: 1 x hydraulic core pull control 1 x pneumatic valve
Production year: 2007 Injection unit: .../800-350 Screw diameter: 35 / 35 mm Injection volume: 139 / 139 cc Injection weight: 131 / 131 g Tool closure system: 320/... Clamping force: 320 t Distance between tie rods: 720 x 720 mm Tool height: 300...1400 mm Ejector stroke: 250mm General data: Pick-up date: Immediate Dimensions (m) LxWxH: 6.83 x 2.25 m Weight: 17.000 kg Instrumentation: 1 x Defective conveyor belt 1 x roller conveyor Turntable Rotameter 8 sections Rotameter 12 sections Rotameter 4 sections 3 x Cores Euromap 67 4 x Pneumatic valves 2 x Hauls On the photos shown, the peripherals are not always included.
Production year: 2006 Injection unit: .../150-150 Screw diameter: 30 / 30 mm Injection volume: 77 / 77 cc Injection weight: 72 / 72 g Tool closure system: 200/... Clamping force: 200 t Distance between tie rods: 570 x 570 mm Tool height: 400...1050 mm Ejector stroke: 225mm On the photos shown, the peripherals are not always included.
Machine in good condition, dry, clean, ready for production. The pump is quiet and the injection molding is precise. Everything works perfectly. With 2 core pullers and robot connector, with quality control program. Please see my other ads.
Arburg 420 M 1000 - 250, 100 t (1996) Clamping force 100 t Screw 40 mm Mold height min 250 mm Distance between tie bars 420 mm Mould weight max 1,2 t Shot capacity 188 ccm Control Multronica Core pullers - 1 Hotrunner zones - no Weight 3230 kg, L x W 4100 x 1270 mm year of made 1996 stock number 00655 accessories - no (in price of machine is not hopper loader on photo, but is possible to buy it)
1997 Arburg 420M 1000-250, 100 t Clamping force 100 ton Screw 30 mm Mold height min 250 mm distance between tie bars 420 mm Mould weight max 1,2 t Shot capacity 106 ccm Weight 3230 kg, L x W 4100x1270 mm control Multronica Core pullers - 2 Hotrunner zones - no year of made 1997 accessories - no (in price of machine is not hopper loader on photo, but is possible to buy it)
1998 Arburg Allrounder 320 M 500 - 210, 50 t Clamping force 50 t Screw 30 mm Mold height min 250 mm Distance between tie bars 320 mm Mould weight max 0,6 t Shot capacity 101 ccm Control Multronica Core pullers - no Hotrunner zones - no Weight 2610 kg, L x W: 4100 mm x 1200 mm year of made 1998 accessories - no (in price of machine is not hopper loader on photo, but is possible to buy it)
1996 Arburg Allrounder 320 M 500 - 90, 50 t Clamping force 50 t Screw 30 mm Mold height min 250 mm Distance between tie bars 320 mm Mould weight max 0,6 t Shot capacity 71 cmm Control Multronica Core pullers - no Hotrunner zones - no Weight 2360 kg, L x W: 4100 mm x 1200 mm year of made 1996 stock number 00660 accessories - no (in price of machine is not hopper loader on photo, but is possible to buy it)
ARBURG ALLROUNDER 221 K5 350-100 (2002) Injection molding machine Closing force: 350kN Opening stroke: 200 mm. Mold mounting height: 150-300 mm. Distance between columns: 350-500 mm. Mold clamping plates: 221 mm. Mold diameter: 342 x 250 mm. Weight of the mit. Mobile of the mold: 75 kg. Ejector force: 24 kN Ejector stroke: 60 mm. Pump motor: 7.5 kW Dry running time: 14.1s Screw diameter: 25 mm. Screw length L/D: 20 mm. Screw stroke: 100mm. Injection volume: 49 cm3 Injected part weight: 41 g/PS Injection pressure: 2000 bar. Injection flow: 54 cm3/s Spindle tangential speed: 29 m/min. Spindle torque: 300 Nozzle support force: 50 kN Nozzle separation stroke: 180 mm. Nozzle cylinder heating: 1600 +3 x 900 kW Oil tank: 50 l. Voltage: 50Hz Heating: 4.6 kW Total connection: 12.1 kW Weight: 1260kg.
Injection Molding Machine Arburg Allrounder CENTEX 420 C 1000 - 350, 100 t (year 2003) stock number 00653 Clamping force 100 t Screw 45 mm Mold height min 250 mm Distance between tie bars 420 mm Mould weight max 1,2 t Shot capacity 230 ccm Control Selogica Core pullers - 2 Hotrunner zones - 12 Weight 3430 kg, L x W 4250 x 1640 mm year of made 2003 accessories - no (in price of machine is not hopper loader on photo, but is possible to buy it)
2001 Arburg Allrounder Selecta 320 S 500 - 150, 50 t Clamping force 50 t Screw 30 mm Mold height min 225 mm Distance between tie bars 320 mm Mould weight max 0,6 t Shot capacity 78 ccm Control Selogica Core pullers - 1 Hotrunner zones - 9 Weight 2250 kg, L x W: 3700 mm x 1100 mm year of made 2001 stock num 00659 accessories - no (in price of machine is not hopper loader on photo, but is possible to buy it)
Arburg 1500T 3200-1300 e² / Hybrid machine with one turntable Year of construction: 2011 Injection unit: Screw diameter: 60 mm Injection weight: 607 g Spray pressure: 2000 bar Dosing volume: 664 ccm Clamping unit: Clamping force: 320 t Tie bar spacing: 0x0 mm Size of clamping plates: 1510 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 30,000 in automatic mode Euromap 67 Robot Interface Control with air valve Hydraulic core pull x 3 Hot runner control x 13 Injection unit hardened - Bimetal Main motor of the machine - servo motor driven by inverter Very precise turntable, driven by a servo motor, controlled by an inverter Turntable diameter: 1500 mm Horizontal injection unit with automatic injection height adjustment Sel ...
Arburg 570S 2200-290/100/100 / Production line with the Wittmann W823 robot / Operating hours: 20,499 h in automatic mode Year of construction: 2016 Injection unit: Screw diameter: 35 mm Injection weight: 132 g Spray pressure: 2000 bar Dosing volume: 144 ccm Clamping unit: Clamping force: 220 t Tie bar spacing: 570x570 mm Size of clamping plates: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: 3-component injection moulding machine, high-speed Very good technical condition Operating hours: 20,499 h in automatic mode Euromap 67 Robot Interface Air valve x 6 Hydraulic, needle core pull, controlled by a proportional valve x 4 Control with hot runners Injection unit hardened - Bimetal Proportional valve on the injection unit – precise injection Machine with two cylinders / battery with compressed ...
Arburg 570S 2200-290/100/100 / Production line with the Wittmann W843 robot / Operating hours: 23,897 h in automatic mode Year of construction: 2014 Injection unit: Screw diameter: 35 mm Injection weight: 132 g Spray pressure: 2000 bar Dosing volume: 144 ccm Clamping unit: Clamping force: 220 t Tie bar spacing: 570x570 mm Size of clamping plates: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: 3-component injection moulding machine, high-speed Very good technical condition Operating hours: 23,897 h in automatic mode Euromap 67 Robot Interface Air valve x 6 Hydraulic, needle core pull, controlled by a proportional valve x 4 Control with hot runners Injection unit hardened - Bimetal Proportional valve on the injection unit – precise injection Machine with two cylinders / battery with compressed ...
Arburg 520C 2000-350/150 / Production line with the Wittmann W731 robot Year of construction: 2008 Injection unit: Screw diameter: 40 mm Spray weight: 166 g Spray pressure: 2120 bar Dosing volume: 182 ccm Clamping unit: Clamping force: 200 t Tie bar spacing: 520x520 mm Size of clamping plates: 728x728 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: 2-Component Injection Molding Machine Very good technical condition Euromap 67 Robot Interface Air Valve x 4 Hydraulic, needle core pull, controlled by a proportional valve x 3 Control with hot runners Injection unit hardened - Bimetal Proportional valve on the vertical injection unit – precise injection Parallel Movements Screw diameter in vertical injection unit: ⌀25 mm - 49 g/hp Robot Wittmann W731 Year of construction: 2008 5-axis robots: 3 axes ar ...
Arburg 570E 2000-800 with the Sepro Industrial Robot 65 sprue picker / Electric machine / Operating hours: approx. 3,500 h in automatic mode Year of construction: 2021 Injection unit: Screw diameter: 50 mm Spray weight: 359 g Spray pressure: 2000 bar Dosing volume: 392 ccm Clamping unit: Clamping force: 200 t Tie bar spacing: 570x570 mm Size of clamping plates: 795x795 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Perfect technical condition, machine like new Electric machine: high-speed, energy-saving and very quiet Operating hours: approx. 3,500 h in automatic mode Euromap 67 Robot Interface Control with air valve Hydraulic core pull x 2 Air core on solid plate side x 2 Pneumatic nozzle closing valve x 2 Injection unit hardened - Bimetal Central lubrication Parallel Movements Sprue Picker Sepr ...
Arburg 570C 2000-150/60 / 2K machine Year of construction: 2003 Injection unit: Screw diameter: 35 mm Injection weight: 97 g Spray pressure: 1620 bar Dosing volume: 106 ccm Clamping unit : Clamping force: 200 t Tie bar spacing: 570x570 mm Size of clamping plates: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 67 Robot Interface Hydraulic Core Pull x 2 Hot runner control x 12 Injection unit hardened - Bimetal Screw diameter in vertical injection unit: fi 18 mm Machine with 1 cylinder/battery with compressed nitrogen (extra charge for fast working) It is possible to install a turntable in the machine - at an additional cost Metrics: Weight: 8000 kg Length/width/height: 0x0x0 m Drive: Pumps/motor: 30 kW Heating capacity: 9.4 + 3.2 kW Total power: 42.6 kW All offered machines are started by ou ...
Arburg 570H 2000-2100 with the Sepro Industrial Robot SDR 22S robot / Hybrid machine / Operating hours: approx. 29,000 h in automatic mode Year of construction: 2010 Injection unit: Screw diameter: 70 mm Injection weight: 984 g Spray pressure: 2000 bar Dosing volume: 1078 ccm Clamping unit : Clamping force: 200 t Tie bar spacing: 570x570 mm Size of clamping plates: 795x795 mm Ejector: hydraulic Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Machine in very good technical condition Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 29,000 h in automatic mode Euromap 67 Robot Interface Air valve x 2 Hydraulic core pull x 1 Air Core Pull x 7 Hot runner control x 15 Injection unit hardened - Bimetal Main motor of the machine - servo motor driven by inverter - energy saving The injection unit ...
Arburg 470C 1500-800 with the Sepro Industrial Robot 65 sprue picker Year of construction: 2021 Injection unit: Screw diameter: 50 mm Spray weight: 359 g Spray pressure: 2000 bar Dosing volume: 392 ccm Clamping unit: Clamping force: 150 t Tie bar spacing: 470x470 mm Size of clamping plates: 650x650 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Perfect technical condition, machine like new Operating hours: 7,788 h in automatic mode Euromap 67 Robot Interface Air valve x 1 Hydraulic core pull x 1 Pneumatic Core Pull x 2 Pneumatic nozzle closing valve x 2 Injection unit hardened - Bimetal Sprue Picker Sepro Industrial Robot 65 Year of construction: 2021 Purchase of the sprue picker at an additional cost It is possible to buy the machine with another robot It is possible to buy a Moretto raw materi ...
Arburg 470C 1500-400 with the Wittmann W721 robot Year of construction: 12.2006 Injection unit: Screw diameter: 40 mm Spray weight: 184 g Spray pressure: 2000 bar Dosing volume: 201 ccm Clamping unit: Clamping force: 150 t Tie bar spacing: 470x470 mm Size of clamping plates: 650x650 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot Interface Control with air valve Hydraulic core pull x 1 Injection unit hardened - Bimetal Built-in conveyor belt and sorting flap Robot Wittmann W721 Year of construction: 2006 4-axis robots: 3 axes are driven by servo motors (electric); Axis C - pneumatic Travels in axes: X-550, Y-1200, Z-3000 Touch control panel The safety package for robots Robot with adapter Purchase of the robot at an additional cost Metrics: Weight: 4900 kg Length/Width/Height: 4 ...
Arburg 470C 1500-675 Year of construction: 2004 Injection unit: Screw diameter: 60 mm Injection weight: 427 g Spray pressure: 1440 bar Dosing volume: 508 ccm Clamping unit: Clamping force: 150 t Tie bar spacing: 470x470 mm Size of clamping plates: 685x685 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 12 Robot Interface Core Pull Control Injection unit hardened - Bimetal Parallel Movements Metrics: Weight: 4660 kg Length/Width/Height: 5.00x1.93x2.22 m Drive: Pumps/motor: 30 kW Heating capacity: 14.9 kW Total power: 44.9 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request
Arburg 520S 1300-800 / Machine in very good technical condition Year of construction: 2008 Injection unit: Screw diameter: 50 mm Spray weight: 359 g Spray pressure: 2000 bar Dosing volume: 392 ccm Clamping unit: Clamping force: 130 t Tie bar spacing: 520x520 mm Size of clamping plates: 695x695 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Machine in very good technical condition Euromap 67 Euromap 12 Robot Interface Air valve x 2 Injection unit hardened - Bimetal The machine was regularly serviced by the authorised service company Arburg in the United States. Metrics: Weight: 6450 kg Length/Width/Height: 4.81x1.57x2.19 m Drive: Pumps/motor: 30 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the se ...
Arburg 470C 1500-150/150 / 2K machine / machine in very good technical condition Year of construction: 2005 Injection unit: Screw diameter: 25 mm Injection weight: 49 g Injection pressure: 2500 bar Dosing volume: 54 ccm Clamping unit : Clamping force: 150 t Tie bar spacing: 470x470 mm Size of clamping plates: 685x685 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: 2K Machine Euromap 67 Robot Interface Air valve x 1 Hydraulic core pull x 1 Injection unit hardened - Bimetal Proportional valve on the injection unit – precise injection Type of injection unit: Vario - This offers the possibility to use the injection unit, e.g. for side spraying Parallel Movements The vertical injection unit - screw diameter fi 25 mm (49 g/PS) It is possible to change screw diameters in both injection units for the screw diameters recomm ...
Arburg 420C 1300-675 with the Star sprue picker Year of construction: 2002 Injection unit: Screw diameter: 50 mm Spray weight: 297 g Spray pressure: 2080 bar Dosing volume: 353 ccm Clamping unit: Clamping force: 130 t Tie bar spacing: 420x420 mm Size of clamping plates: 605x605 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 12 Robot Interface Air valve x 2 Hydraulic core pull x 2 Injection unit hardened - Bimetal Type of injection unit: Vario - This offers the possibility to use the injection unit, e.g. for side spraying Covers from the operator's side open automatically Metrics: Weight: 4330 kg Length/Width/Height: 4.80x1.64x2.08 m Drive: Pumps/motor: 30 kW Heating capacity: 14.9 kW Total power: 44.9 kW All offered machines are started by our service technicians before they are sold. It is possib ...
Arburg 470S 1300-350 Year of construction: 2001 Injection unit: Screw diameter: 35 mm Spray weight: 117 g Injection pressure: 2500 bar Dosing volume: 139 ccm Clamping unit : Clamping force: 130 t Tie bar spacing: 470x470 mm Size of clamping plates: 650x650 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 12 Robot Interface Hydraulic core pull x 1 Hot runner control x 6 Injection unit hardened - Bimetal Proportional valve on the injection unit – precise injection Built-in print quality control system from Sensor Kistler - tool pressure measurement Type of injection unit: Vario - This offers the possibility to use the injection unit, e.g. for side spraying The new injection unit is installed in the machine Metrics: Weight: 5100 kg Length/Width/Height: 4.45x1.49x2.17 m Drive: Pumps/motor: 22 kW Heatin ...
Arburg 470S 1300-350 Year of construction: 2001 Injection unit: Screw diameter: 35 mm Spray weight: 117 g Injection pressure: 2500 bar Dosing volume: 139 ccm Clamping unit: Clamping force: 130 t Tie bar spacing: 470x470 mm Size of clamping plates: 650x650 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 12 Robot Interface Hydraulic core pull x 1 Hot runner control x 6 Injection unit hardened - Bimetal Proportional valve on the injection unit – precise injection Built-in print quality control system from Sensor Kistler - tool pressure measurement Type of injection unit: Vario - This offers the possibility to use the injection unit, e.g. for side spraying The new injection unit is installed in the machine Metrics: Weight: 5100 kg Length/Width/Height: 4.45x1.49x2.17 m Drive: Pumps/motor: 22 kW Heating c ...
Arburg 470S 1000-290 / Production line with the Wittmann W821 robot / Operating hours: approx. 35,000 h in automatic mode Year of construction: 2012 Injection unit: Screw diameter: 30 mm Injection weight: 97 g Injection pressure: 2500 bar Dosing volume: 106 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 470x470 mm Size of clamping plates: 637x637 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Very good technical condition Operating hours: 35,000 h in automatic mode Euromap 67 Robot Interface Air valve x 2 Hydraulic, needle core pull, controlled by a proportional valve x 2 Control with hot runners Injection unit hardened - Bimetal Proportional valve on the injection unit – precise injection Cavity pressure sensor Priamus Robot Wittmann W821 Year of construction: 2012 5-axis robots: 4 axes ...
Arburg 420C 1000-350 / Very good technical condition Year of construction: 2002 Injection unit: Screw diameter: 40 mm Spray weight: 153 g Spray pressure: 2120 bar Dosing volume: 182 ccm Clamping unit : Clamping force: 100 t Tie bar spacing: 420x420 mm Size of clamping plates: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 12 Euromap 67 Robot Interface Hydraulic core pull x 1 Hot runner control x 10 Injection unit hardened - Bimetal The machine is integrated with the original Arburg conveyor belt Built-in sorting flap Metrics: Weight: 3430 kg Length/Width/Height: 4.35x1.64x2.08 m Drive: Pumps/motor: 22 kW Heating capacity: 10.2 kW Total power: 32.2 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests ...
Arburg 470H 1000-800 e² with the Wittmann W821 robot / Hybrid machine / Operating hours: 16,458 h in automatic mode Year of construction: 2015 Injection unit: Screw diameter: 55 mm Spray weight: 434 g Spray pressure: 1650 bar Dosing volume: 474 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 470x470 mm Size of clamping plates: 637x637 mm Ejector: hydraulic Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Machine in very good technical condition Hybrid machine: high-speed, energy-saving and very quiet Operating hours: 16,458 h in automatic mode Euromap 67 Robot Interface Air valve x 2 Hydraulic core pull x 1 Control with hot runners Injection unit hardened - Bimetal Main motor of the machine - servo motor driven by inverter - energy saving The injection unit is driven by the servo motor, which is controlled by an ...
Arburg 420C 1000-290 with the Geiger MiniServo 0.5 sprue picker Year of construction: 2007 Injection unit: Screw diameter: 40 mm Spray weight: 172 g Spraying pressure: 1530 bar Dosing volume: 188 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 420x420 mm Size of clamping plates: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot Interface Air valve x 1 Hydraulic core pull x 1 Injection unit hardened - Bimetal Proportional valve on the injection unit – precise injection Built-in sorting flap It is possible to change the screw diameter The machine was regularly serviced by Arburg's authorised service Metrics: Weight: 3740 kg Length/Width/Height: 4.14x1.63x2.07 m Drive: Pumps/motor: 15 kW Heating capacity: 6.4 kW Total power: 21.4 kW All offered machines are st ...
Arburg 320M 850-210-210 / 2K machine Year of construction: 1992 Injection unit: Screw diameter: 25 mm Spray weight: 62 g Injection pressure: 2950 bar Dosing volume: 73 ccm Clamping unit: Clamping force: 85 t Tie bar spacing: 320x320 mm Size of clamping plates: 490x490 mm Ejector: hydraulic Clamping unit: hydraulic Control: MULTRONICA Additional equipment: Euromap 12 Robot Interface Air Valve x 7 Hydraulic core pull x 2 Injection unit hardened - Bimetal Screw diameter in vertical injection unit: fi 25 mm Metrics: Weight: 3010 kg Length/width/height: 0x0x0 m Drive: Pumps/motor: 22 kW Heating capacity: 8 kW Total power: 30 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Ł ...
Arburg 420C 1000-350 Year of construction: 1995 Injection unit: Screw diameter: 40 mm Spray weight: 153 g Spray pressure: 2120 bar Dosing volume: 182 ccm Clamping unit: Clamping force: 100t Tie bar spacing: 420x420 mm Size of clamping plates: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: DIALOGICA Additional equipment: Euromap Robot Interface Hydraulic Core Pull X1 Metrics: Weight: 3700 kg Length/Width/Height: 4.35x1.64x2.08m Drive: Pumps/motor: 22 kW Heating capacity: 8.6 kW Total power: 30.6 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request