used ARKU for sale

Ref. No.: 850162 Item No.: 40219 F. Nr: 193 Connection: 380 V /50 Hz

BRAND: ARKU YEAR: 2020 MODEL: EDGEBREAKER 1000 PRODUCTION HOURS: 960 APPLICATION TYPE: DEBURRING LOCATION: POLAND MACHINE TYPE: DEBURRING AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MEASUREMENTS WIDTH: 1800 MM MEASUREMENTS DEPTH: 1950 MM MEASUREMENTS HEIGHT: 2050 MM CONTROL UNIT BRAND: ARKU Additional Equipment - STANDARDS WET DUST COLLECTION UNIT - 1 ADDITIONAL MODULE UNITS FOR SURFACE FINISH - 3 MODULAR MACHINING UNITS - BRUSH DISC Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - MATERIAL: STEEL, STAINLESS, ALUMINIUM - MAX THICKNESS: 0. 5 - 12 MM - MAX PASSAGE WIDTH: 250 MM - MIN WORKPIECE DIMENSIONS: 15 X 15 MM - PASS HEIGHT: 940 MM - MAX FEED RATE: 6M / MIN

material width: 0250 mm material thickness: 3,00 mm no. of straightening rolls: 19 sheet thickness - min.: 0,30 mm diam. of the rolls ca.: 18 mm speed: 2-14 m/min back-up rolls-needle bearings: ja / yes straightening rolls - bronze bearings: ja / yes total power requirement: 1,70 kW weight of the machine ca.: 0,60 t dimensions of the machine ca.: 1,15 x 0,90 x 1,25 m - max. roller distance vertically 8 mm - Lubrication of the straightening rollers via grease nipples - Infeed roller table with lateral belt guide - Exit table with belt scanning (start/stop) - Straightening machine is currently designed as a strip straightening machine but can also be used as a part leveling machine The straightener was inspected by the specialist team. Test can be make with your material - please contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width - max.: 0600 mm coil weight: 3,00 t coil internal dia.: 465 - 530 mm total power requirement: kW weight of the machine ca.: 2,45 t dimensions of the machine ca.: 2,72 x 1,70 x 2,40 m material width (previously) 400 mm mandrel length 630 (655) mm mandrel – Ø (expanding range) 465 – 530 mm height floor - middle of mandrel 1.450 mm height upper edge decoiler construction - middle of mandrel 1.050 mm working direction (previously) right - left accessories: construction 3-segment-construction decoiler movable on base frame hydraulically press arm hydraulically press roll not driven expanding process mechanically decoiler motor driven (via chain) power 3,0 kW no. – limiting arms 6 dimension – limiting arms (l x h) 410 x 180 mm valve components mounted at decoiler construction control unit (breaker unit) with cable hydraulic unit not available The data for this ad was cre ...

sheet width: 0250 mm coil outside dia.: 1800 mm weight max. in kg: 2 x 3000 kg : 3,80 mm : 470 - 530 mm : 21 : 30 mm : 4 : 18,0 kW speed: 20 m/min power capacity: 18 kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Decoiler AH 3000/2/250/ST with continuously variable drive, hydraulic central spread, Automatic post-spreading system, hydraulic pressure device, hydraulic swivel, Straightening machine RM 3025.4/21 with continuously variable drive, driven straightening rollers, manual Roller mill adjustment, quick-change device for the straightening rollers Belt loop control via ultrasound Material thickness / with material width 3.80 / 250 mm Material thickness / with material width 6.00 / 100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Processing: both sides, dry, max. workpiece width: 1300mm, material thickness: 0.8-100mm, max. passage width: 1300mm, length: 3100mm, width: 2100mm, height: 2400mm, weight: 5.6t, total operating hours/automatic: 11,002/ 5566h, including 2x 2000mm auxiliary conveyors and extensive documentation, without extraction system or abrasives, on-site inspection is possible.

Coil weight: 2 x 500 kg Material width: 300 mm Coil exterior diameter: 1200 mm Expansion range: 350 - 610 mm Weight of machine approx.: 2,2 ton

CONTROLS   PLC OVERALL SPECIFICATIONS (COIL LINES)   sheet width max.: 500 mm   sheet thickness max.: 4 mm   coil weight max.: 10.5 to   feedstock transport direction: right to left COIL CHAIR   coil weight max.: 10.5 to   stroke: 750 mm DECOILER   design: single reel   sheet width max.: 500 mm   sheet width (min): 150 mm   coil weight max.: 10.5 to   max. diameter of coil: 2020 mm   mandrel expansion range from: 470 mm   mandrel expansion range up to: 530 mm   feed velocity max.: 20 m/min CROP SHEAR   sheet thickness max.: 4.5 mm   working width max.: 1130 mm LEVELLER UNIT   sheet width max.: 500 mm   sheet width (min): 150 mm   sheet thickness max.: 4 mm   sheet thickness min.: ...

CONTROLS   PLC SIEMENS S5 115 U OVERALL SPECIFICATIONS (COIL LINES)   sheet width max.: 350 mm   sheet thickness max.: 8 mm   coil weight max.: 4 to   feed velocity max.: 10 m/min   feedstock transport direction: left to right DECOILER   design: single reel   sheet width max.: 350 mm   coil weight max.: 4 to   max. diameter of coil: 1500 mm   mandrel expansion range from: 370 mm   mandrel expansion range up to: 530 mm   feed velocity max.: 10 m/min LEVELLER UNIT   sheet width max.: 350 mm   sheet thickness max.: 8 mm   number of leveller rolls: 21   diameter of leveller rolls: 50 mm   number of infeed-/outfeed rolls: 2   diameter of feed rolls: 120 mm   feed velocity max.: 10 m/min ELECT ...

material width:350 mm coil weight:2,0 t coil internal diameter:470 - 530 mm coil external diameter:1500 mm power requirement:1,0 kW weight:1,5 t dimensions (WxDxH):1,3 x 1,6 x 1,9 m

material width:500 mm coil weight:2 x 2,0 t material thickness:1,0 - 6,0 mm coil internal diameter:350 - 420 mm coil external diameter:1600 mm no. of straightening rolls:9 straightening roll diameter:50 mm number of draw-in rolls:2 speed:0 - 40 m/min material thickness at 500 mm material width:3,5 mm power requirement:17,5 kW Dimensions (WxDxH):2,3 x 4,2 x 2,4 m straightening machine:RM 5050.4/9 double decoiler:AH 2000/2/M snubber roll:pneumatic interchangeable jaws:130 mm expansion of the inner diameter

material width:600 mm material thickness: - 4,0 mm no. of straightening rolls:21 straightening roll diameter:30 mm material cross-cut:1800 mm² speed:6 - 36 m/min Power capacity:4,5 kW Weight:2,0 t Dimensions (WxDxH):1,5 x 2,0 x 1,9 m

material width:250 mm material thickness:0,4 - 3,5 mm no. of straightening rolls:9 straightening roll diameter:30 mm speed:3 - 15 m/min material thickness at 250 mm material width:3,0 mm material thickness at 200 mm material width:3,5 mm power capacity:1,8 kW weight:0,9 t Dimensions (WxDxH):1,45 x 1,4 x 1,55 m

Capacity: 12 t Table length: 2000 mm Table width: 0 mm Stroke: 2000 mm CNC Brand: _Unknown / Other CNC Model: Leonard en Bauer MAKE   ARKU Germany TYPE    VRM 200/7/2000 + AH 1200/2000/MSG-4Q YEAR   1990 SPECIFICATIONS Controll   Leonard + Bauer Throat     2000 mm Maximum sheet thickness Steel   6,3 mm DIMENSIONS Length   6000 mm Width     4500 mm Height    3000 mm ARKU De-Coil & Straightener 2000 x 6,3 mm   Make           : ARKU Germany Typ              : VRM 200 / 7 / 2000 Serial No    : WO 1576 Age              : 1989 in Work 1990  ARKU Precision s ...