used BORNEMANN for sale

Used eccentric screw pump Bornemann E2H 1024 Built: 1993 Power: 4 kW Voltage: 400/690 V Flow rate: 10 m3/h Speed: 370 rpm Viscosity: 10000CST Conveyor pressure: 2 bar Suction flange: DN80, top Pressure flange: DN65, axial Manual: yes Machine number: 329495

Control: Fidia C20 with handwheel Areas of work X-axis: approx. 5,000 mm Y-axis: approx. 2,700 mm Z-axis: approx. 1,250 mm Clamping table Length x width x height: approx. 5,600 x 2,740 x 520 mm (cast iron) Table load: max. 15,000 kg T-slots and distance: 10 x 22H8 / 255 mm Milling spindle Spindle power: 8 kW Spindle speed: 6,000 rpm Tool holder: 78/8 flange Tool tensioning: manual with union nut Drives Linear axes Caiquw7evf Feed speed X-, Y-, Z-axis: up to 20 m/min Axle acceleration X-, Y-, Z-axis: up to 1.5 m/s2 Connection data Connected load: approx. 28 KW Fuse: 63 A Dimensions, weights Machine space requirement: approx. 8,000 x 5,000 x 4,500 mm Total weight: 25,000 kg Condition of the machine Fully functional condition, regular maintenance by machine manufacturer. Machine already dismantled and stored. At call!

Control: Fidia C20 with handwheel Areas of work X-axis: approx. 5,000 mm Y-axis: approx. 2,700 mm Z-axis: approx. 1,250 mm Clamping table Length x width x height: approx. 5,600 x 2,740 x 520 mm (cast iron) Table load: max. 15,000 kg T-slots and distance: 10 x 22H8 / 255 mm Milling spindle Spindle power: 8 kW Spindle speed: 6,000 rpm Tool holder: 78/8 flange Tool tensioning: manual with union nut Drives Linear axes Caiquw7evf Feed speed X-, Y-, Z-axis: up to 20 m/min Axle acceleration X-, Y-, Z-axis: up to 1.5 m/s2 Connection data Connected load: approx. 28 KW Fuse: 63 A Dimensions, weights Machine space requirement: approx. 8,000 x 5,000 x 4,500 mm Total weight: 25,000 kg Condition of the machine Fully functional condition, regular maintenance by machine manufacturer. Machine already dismantled and stored. At call!

x-travel: 2400 mm y-travel: 1500 mm z-travel: 810 mm Control: Heidenhain iTNC530 total power requirement: kW weight of the machine ca.: 7.8 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bornemann SLH twin screw pumps are single-flow and self-priming. 2 contact-free intermeshing screws and the pump housing from closed chambers tha, according to the direction of rotation, constantly move towards the pressure dischange end of the pump. This axial system enables cautious, low-pulsation conveyance. It protects the media and maintains size, surface and visual intergrity of the products. The 2-in-1 principle conveys and cleans in one pump. Due to the wide range of the pump speeds, process cycles as well as CIP and SIP procedures are possible with just one pump. This pump is previously used in a dairy factory. Capacity: 2.500 - 2.200 - 2.500 ltr/h. Inlet pressure: - 0,33 - - 0,2 - -0,06 bar with a differential pressure of 4,51 - 3,9 - 0,16 bar gives an discharge pressure of 4,18 - 3,7 - 0,1 bar. Speed 473 - 582 rpm. Viscosity 10.000 - 120 - 120 cst., Type of Machine: Double Scr ...