used CHIRON for sale

Description: travels: X-axis: 2000 mm Y-axis: 450 mm Z-axis: 630 mm control: SIEMENS Sinumerik 840D max. spindle speed: 12000 rpm. spindle power: 11 kW tool holder: SK40 number of tool places: 12  , transport dimensions: machine: 5800 x 2800 x 3000 transporter: 7200 x 1000 x 2200 mm aggregate: 2500 x 1600 x 2100 mm smaller unit: 1200 x 800 x 1800 mm protective foils: 2400 x 1400 x 1200 mm z-motion: 630 mm, x-motion: 2,000 mm, y-motion: 450 mm, control: SIEMENS Sinumerik 840D, taper: SK40, power capacity - spindle: 11 kW, toolchanger positions: 12, turning speed range: 12,000 rpm, weight approx.: 12,200 kg, Approx. Onsite Dimension. (l x w x h): 5,800 x 2,800 x 3,000 mm

Description: Note! without machine vise and tooling z-motion: 425 mm, x-motion: 550 mm, y-motion: 300 mm, control: Siemens Sinumerik, table surface area l x w : 660 x 350 (2x) mm, numbers of pallets: 2, taper: SK40, toolchanger positions: 20, power capacity - spindle: 11 kW, turning speed range: 10,000 rpm, rapid motion: 40 m/min, weight approx.: 4,000 kg, Approx. Onsite Dimension. (l x w x h): 3,550 x 2,240 x 2,450 mm

x-travel: 800 mm y-travel: 630 mm z-travel: 550 mm control: TNC 640 Millturn Heidenhain Main spindle: turning speed range - main spindle: max. 12.000 U/min power capacity - main spindel: 7,5 - 22,5 kW max. Torque: 140 Nm tool taper: HSK-A 63 NC-Rotary table:: faceplate diameter: 280 mm T-slots: H7 x 50 measuring system: ECN 225 swivellable: +/-120 ° Torque: max. 180 Nm Holding Torque: 800 Nm max. table load: 320 kg turning speeds: 200 min/-1 Tool-Presetter:: numbers of positions in the tool changer: 40 max. tool diameter: 75 mm max. tool-dia with free toolbox: 160 mm max. tool length: 320 mm max. tool weight: 4 kg feed: rapid travel ( X / Y / Z ): 60 m/min total power requirement: 31 kVA weight of the machine ca.: 7,8 t dimensions of the machine ca.: 5,0 x 6,0 x 3,0 m Documents: Chip conveyor: Coolantsystem: high pressure coolant: 40 bar through spindle coolant: triple signal li ...

x-travel: 550 mm y-travel: 300 mm z-travel: 425 mm tool taper: SK 40 control: Siemens 840 D total power requirement: 12 KVA weight of the machine ca.: 5 t transport dimensions LxWxH: 2,1 x 3,1 x 3,0 m chiron fz 12 wm with changeable plate with 2 x 4. axis PEISELER WIth ONTROL SIEMENS 810 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 550 mm y-travel: 400 mm z-travel: 360 mm Control: Sinumerik 840D total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC control Sinumerik 840D 2-axes swivel rotary table (A- and C-axis) 48-fold automatic tool changer coolant through spindle device (IKZ) measuring feeler chip conveyor coolant device Technische Daten / technical details: Verfahrweg X / X-Travel 550 mm Verfahrweg Y / Y-Travel 400 mm Verfahrweg Z / Z-Travel 360 mm C-Achse / C-axis 360 ° A-Achse / A-axis +-100 ° Rundtischdurchmesser / rotary table diameter 280 mm Werkzeugschaft / spindle taper HSK A63 Drehzahl / spindle speed 20-12000 UpM /rpm Anzahl der Werkzeugplätze / tool places in ATC 48 fach Antriebsleistung Spindel 100/60%ED / drive capacity spindle 100/60%ED 12/28 kW Gewicht der Maschine ca. / weight 8700 kg Technische Daten, Zubehör und Bes ...

bore capacity in steel (diameter): 10 mm throat: 0 mm bore stroke: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mm y-travel: 250 mm z-travel: 250 mm table surface area: 2 x 550 x 300 mm spindle taper: HSK-A 32 spindle taper: DIN 69893 spindle turning speed - stepless: 20 - 15.000 U/min spindle motor: 7,4 kW max. torque on the spindle: max. 23 Nm spindle throat: 200 - 450 mm distance table - lower edge spindle: 170 - 420 mm power feed x/y/z: 2000 / 2000 / 3000 N rapid traverse longitudinal and cross: 40 m/min rapid traverse vertical: 60 m/min coolant tank: 100 l control: SIEMENS, 840 D total power requirement: kW weight of the machine ca.: 2,2 t dimensions of machine L x W x H: 2,75 x 1,45 x 2,25 m Accessories: various tool fixtures, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

serial number: 161-24 x-travel: 550 mm y-travel: 300 mm z-travel: 425 mm Number of working hours: 35284 h cooling: Innen nein : max. 10.500 : nein control: Simens Sinumerik 810D weight: 4000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

serial number: 162-74 x-travel: 550 mm y-travel: 300 mm z-travel: 425 mm Number of working hours: 58370 h cooling: ja : 10.500 : nein control: Simens Sinumerik 810D weight: 4000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

serial number: 143-86 x-travel: 550 mm y-travel: 300 mm z-travel: 425 mm Number of working hours: 58046 h cooling: Innen nein : max. 10.500 : nein control: Simens Sinumerik 810D weight: 4600 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 2 Number of axles: 4 St. tool taper: HSK 63 toll turrets: 60 weight: 9600 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 489-41 x-travel: 550 mm y-travel: 300 mm z-travel: 425 mm Number of working hours: lässt sich nicht auslesen h cooling: Innen nein : max. 10.500 4th axis: nein control: Simens Sinuerik 810 weight: 4000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2000 mm y-travel: 425 mm z-travel: 425 mm Number of working hours: lässt sich nicht auslesen h cooling: Kühlung ja : max. 10.500 : ja control: Simens Sinumerik 810 weight: 6700 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

serial number: 456-16 x-travel: 550 mm y-travel: 300 mm z-travel: 425 mm cooling: Innen nein : max. 10.500 : nein control: Simens Sinumerik 810 weight: 4000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pallet length: 0 mm Pallet width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Number of pallets: 0   Positions ATC: 0   CNC Brand: 0 CNC Model: 0 Control: GE Fanuc Series 18i-MB5 Operating hours: 34031 Technical data Number of axis total: 3 Number of spindles: 1 Table length: 770 mm Table width: 290 mm Longitudinal travel (X-axis): 450 mm Transversal travel (y-axis): 270 mm Vertical travel (z axis): 310 mm Drill capacity: 12 mm Max. taping diameter M: 8 Tool changer: Number of tools: 24 Tool diameter max.: 47 mm Diameter with free adjacent pockets: 100 mm Tool lenght: 160 mm Max. tool-weight: 1.2 kg Time of tool changing: 0.8 / 2.3 sec Average chip-to-chip time: 2.2 sec Spindle nose: HSK-A: 40 DIN 69893 Spindle speeds: up to: 30000 rpm Rapid traverse:: 75 m/min Air connect: 6 bar Voltage 50 Hz 3x: 400 Volt Spindle motor: 7 kW Total power required: 14 kW Various acces ...

Technical data Table length: 280 mm Table width: 280 mm Voltage 50 Hz 3x: 400 Volt Power: 1.5 kW Machine´s weight about: 350 kg Overall dimensions machine: Length: 800 mm Width: 700 mm Height: 2200 mm Various accessories: Déclanchement à deux mains

Pallet length: 0 mm Pallet width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Number of pallets: 0   Positions ATC: 0   CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK 810 M Operating hours: 15198 Technical data Number of axis total: 3 Table length: 2280 mm Table width: 450 mm Number of T-channels: 3 Distance of the T-slots: 150 mm T-channel width: 18 mm Longitudinal travel (X-axis): 2000 mm Transversal travel (y-axis): 400 mm Vertical travel (z axis): 425 mm Tool changer: Number of tools: 20 Tool diameter: 65 mm Diameter with free adjacent pockets: 180 mm Tool lenght: 220 mm Max. tool-weight: 8 kg Spindle nose SK: 40 DIN 69871 Vertical spindle speeds: stepless from: 20 rpm up to: 10500 rpm Feeds: Air connect: 6 bar Voltage 50 Hz 3x: 400 Volt Spindle motor: 18 kW Total power required: 31 kVA Machine´s weight about: 7200 kg Overall dimensions machine: Length: ...

Table length: 450 mm Table width: 300 mm Longitudinal X: 300 mm Cross Y: 250 mm Vertical Z: 250 mm Positions ATC: 12   Positions APC: 2   CNC Brand: Fanuc 3-axis CNC machine (VMC)CHIRON - FZ08W MACH-ID 7652 Make: CHIRON Type: FZ08W Control: Fanuc 21-M Year: 1998 Pallet changer 2 tables 450 x 300 x 75 Kg Workpiece rotation station 180 Gr Large Tooling package HSK-32 Coolant system 100 Liter X - Travel:              300mm Y - Travel:              250mm Z - Travel:              250mm Table Length:            450mm Table Width:             300mm Table load:              75 Feed rate X-Axis:        40000mm/min. Feed rate Y-Axis:    &nbs ...

Table length: 850 mm Table width: 470 mm Longitudinal X: 630 mm Cross Y: 400 mm Vertical Z: 425 mm Positions ATC: 20   Positions APC: 0   CNC Brand: _Unknown / Other MACH-id    5417 MAKE        CHIRON TYPE          FZ 18 W MAGNUM high speed YOP            1997 SPECIFICATIONS X - Travel        630 mm Y - Travel        400 mm Z - Travel        425 mm Table Length     850 mm Table Width      470 mm Table load          250 Kg Feed rate X-Axis       30.000 mm/min. Feed rate Y-Axis         30.000 mm/min. Feed rate Z-Axis         30.000 mm/min. Spindle Taper         40 ISO/ ...

Table length: 950 mm Table width: 360 mm Longitudinal X: 550 mm Cross Y: 300 mm Vertical Z: 280 mm Positions ATC: 12   Positions APC: 0   CNC Brand: Fanuc CNC Model: OM MACH-id   3684 MAKE    Chiron TYPE   FZ 12 S YEAR    1993 SPECIFICATIONS X - Travel    550 mm Y - Travel    300 mm Z - Travel     280 mm bed / plano / portal / moving column   vertical machingcentre Controll    FANUC OM Table Length x Width    950 x 360 mm Table load in kG    250 Kg Spindle Taper    Sk 40  kW power on spindle   5.5 kW Spindle speeds / ranges   7100 Rpm ATC tool changer   12 ? DIMENSIONS Length   2920 mm Width    2400 mm Height   2680 mm

This CHIRON DZ15W MAGNUM HS Vertical Machining Centre was manufactured in 2015. It is equipped with a FANUC Series 31i-model B5 control unit, has 4 axes and a 12000 rpm spindle. The machine comes with swarf conveyor, tooling, coolant / paper filtration unit, high pressure coolant and pallet.

This CHIRON MILL 2000 Vertical Machining Center was manufactured in the year 2003. It is equipped with a Siemens Sinumerik control unit. The machine has a spindle speed of 12000 rpm.

This CHIRON DZ24 WM HS Vertical Machining center was manufactured in the year 2015 in Germany. It is equipped with a Fanuc Series 31 i – MODEL B5 control unit and has 4 axis. The machine has a spindle speed of 15000 rpm.

This CHIRON MILL FA 800 vertical machining center was built in the year 2006 in Germany. it is equipped with a Siemens Sinumerik 840D control unit and has 5 axis. The machine has a spindle speed of 12000 rpm.

This CHIRON MILL 800 Vertical Machining center was manufactured in the year 2015 in Germany. It is equipped with a SIEMENS SINUMERIK control unit and has 5 axis.

This CHIRON FZ15W Vertical Machining center was manufactured in the year 2001. It is equipped with a Siemens SINUMERIK 840D control unit and has 3 axis. There are 2 units available.

This CHIRON FZ15W Vertical Machining center was manufactured in the year 2002 in Germany. It is equipped with a Siemens SINUMERIK 840D control unit and has 4 axis.

This CHIRON MILL 2000 Vertical Machining centre was manufactured in the year 2005 in Germany. Contact us anytime for further questions.

This 5-axis Chiron Mill 800 was manufactured in 2005. It features a spindle revised in September 2022, capable of 20000 rpm and a robust Heidenhain iTNC-530 control. The machine handles up to 380kg on its table with a tool capacity of 40. It has comprehensive cooling options and a full panelling setup. A significant opportunity to buy this Chiron Mill 800 vertical machining centre. Contact us for more information.