used CLOOS for sale

Inv. Num. : 7291 Type: Romat 410 Producer: Cloos Created: 2007 Parameters: Control system: Rotrol II Welding machine: MC3R 553 Workstation with one track: 10 m

Inv. Num. : 7048 Type:- Producer: CLOOS Created: GO 2019 Parameters: Maximum load capacity: 500 kg Clamping length between flanges: 1500 mm

Cloos MIG 350 Synergic - Welding machine - Metal invert gas welding (MIG) and metal active gas welding (MAG) of steel, aluminum and chromium-nickel - Incl. operating instructions - Built in 2007 Specification Entrance: - Nominal input voltage: 3/PE AC 400 V - Nominal frequency: 50 Hz - Maximum input current: 23 A - Mains fuse sluggish: 32 A - Mains connection cable: 4 x 4 mm² - Power plug: 32 A Exit: - Open circuit voltage Uo: 18 - 45 V - Welding range: 30 - 350 A - Duty cycle 100 %: 220 A - Duty cycle 60 %: 280 A - Duty cycle 40 %: 350 A General data: - Noise emission: < 70 dB(A) - Schutart: IP 23 - Cooling type: AF - Dimensions WxHxD: 430 x 930 x 980 mm - Weight: 160 kg

Offer 22437 Specifications: - Welding current max. 450 A / 36 V 60% ED - 350 A / 32 V 100% ED - Welding current adjustable in 2x 18 switch levels 60 - 450 A - 2 bar + 4 bar – regulation, points, interval - 2 roll wire feeders, infinitely adjustable in separate - Wire feeder case CLOSS , CK 68 C - Intermediate package machine – wire feed approx. 6 m - Hose package water-cooled approx. 4 m - Ground cable -Reducer - Connection 400 V / 19 KVA - Space requirement approx. W 490 x H 1200 x D 1100 mm - Weight approx. 180 kg

Load capacity: 10kg, weight: 245kg, with shuttle table.

Number of axes: 6, reach: 3500mm, max. load: 15kg, weight: 220kg, includes welding robot system, additional torch, 2x welding station with turning device, 1x welding station with Demmler table, 1x Cloos QINEO Champ 450 welding machine, has been regularly serviced, on-site inspection is possible.

Arc welder CLOOS Type GLC 357 N Fabr. No. 476 Year of construction approx. 1985 Nominal power 350 Amp. Power 350 Amp. - 80% ED 310Amp. - 100% ED setting range infinitely variable connection hose package 3.5 meters mains connection 380 volts, 50 Hz, 32 Amp. Plug 2 stroke and 4 stroke welding device - external wire feeder type CK 72 ZK with 2 roller drive and 3.5 meter hose package- 4 meter hose package with central connection and BINZEL hand torch - water-cooled- pressure mannometer for gas cylinder Space requirement L x W x H 1300 x 600 x 1100 mm Weight 260 kg good condition; used

Arc welder CLOOS Type GLC 206 Fabr. No. 1150 Year of construction approx. 1984 Nominal power 200 Amp. Power 250 Amp. - 60% ED 200 Amp. - 100% ED Adjustment range 18 steps Mains connection 380 Volt, 50 Hz, 32 Amp. Plug- wire feed adjustment - external wire feeder CLOOS type CK 21 with 2 roller drive - equipped with 1.2 mm welding wire hose package 3 meters with central connection - current indicator - voltage display - air cooling with fan - pressure mannometer for gas cylinder Space requirement L x W x H 1200 x 460 x 960 mm Weight 160 kg; used

Plasma cutter CLOOS type CPS 40/80 Year of construction 1990 Power at 60 % ED 80 Amp. Power at 100% ED 40 Amp. Adjustment range 40 and 80 Ampere (2 steps) Cutting power for steel max. 25 mm Hose package length 5.5 meters Mains connection 400 volts with 32 Amp. Plug hand torch CLOOS Dimensions L x W x H 700 x 600 x 750 mm Weight 160 kg good condition; used

Arc welder CLOOS Type GLC 403 PA-TS Fabr. No. 8198 Year of construction 1994 Nominal power 400 Amp. Power 400 Amp. - 60% ED 310 Amp. - 100% ED setting range infinitely variable connection hose package 4.5 meters Mains connection 380 Volt, 50 Hz, 32 Amp. Plug 2 stroke and 4 stroke welding device - external wire feeder type CK 72/5TSZK with 2 roller drive and 4.5 meter hose package- 4 meter hose package with central connection and EHRIG hand torch type Senator-800-D - Water-cooled - Pressure mannometer for gas cylinder - Welding machine equipped with 1 mm welding wire Space requirement L x W x H 1250 x 600 x 1100 mm Weight 300 kg good condition; used

Arc welder CLOOS Type GLC 357 N Fabr. No. 576 Year of construction approx. 1985 Nominal power 350 Amp. Power 350 Amp. - 80% ED 310Amp. - 100% ED adjustment range infinitely variable connection hose package 4.5 meters mains connection 380 volts, 50 Hz, 32 Amp. Plug 2 stroke and 4 stroke welding device - external wire feeder type CK 72 ZK with 2 roller drive and 4.5 meter hose package- 3 meter hose package with central connection and CLOOS hand torch - water-cooled- pressure mannometer for gas cylinder - welding machine equipped with 1 mm welding wire Space requirement L x W x H 1250 x 600 x 1100 mm Weight 260 kg; used

Water pump, centrifugal pump, small centrifugal pump CLOOS, C.E.M.E. MTP 600 Best. Nr.: 023 03 3900 Q = 9 l/min H = 35 m engine: 0.3 kW 400 V 3AC connection cable: 1.0 m with conversion kit to 220 V 1AC ! New ! Dimensions: 225 x 115 x 125 mm

TIG welding machine with water cooling CLOOS GL 250 I-HAT 20 / 250 A 10 / 20 V Dimensions: 1200 x 600 x 800 mm Year of construction 1990

length:1200 mm height:800 mm weight of the machine ca.:150 kg dimensions of the machine ca.:1200 x 600 x 800 mm

Description: Primary voltage 380 V, maximum welding current 350 amps at 60 % and 1.5 V voltage current intensivity: 350 A, weight approx.: 180 kg, Approx. Onsite Dimension. (l x w x h): 600 x 1,100 x 1,200 mm

Description: maximum welding current 350 amps at 60% and a 31.5 volt, without additional accessories and without CE certificate weight approx.: 180 kg, Approx. Onsite Dimension. (l x w x h): 600 x 1,100 x 1,200 mm

TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine, cooling device, cooling unit -Manufacturer: Cloos, cooling unit for TIG welding machine -Type: unfortunately no type designation -Flow rate: l/min -Quantity: 2x cooling device available -Price per piece -Dimension: 620/310/H235 mm -Weight: 15 kg/pc.

Inert gas welding device, inert gas device -Max. Welding power: 350 A. -2 roller drive -Air cooled -Incl. Ground cable -with removable wire feeder -Gas valve -Hose package: 2.8 m -Dimensions: 1100/640/H1090 mm -Weight: 190 kg

Inert gas welding device, inert gas device -Max. Welding power: 320 A. -2 roller drive -Air cooled -Incl. Ground cable -with removable wire feeder -Gas valve -Hose package -Dimensions: 1000/500/H970 mm -Weight: 170 kg

Inert gas welding device, inert gas device, wire feed case -Wire feed case -with: hose package -Dimensions: 650/350 300 mm -Weight: 36 kg

Type: welding robot Romat 410 Welding machine MC3R 553. Workstation with 10m travel. WPG-S-20000N positioners with a span of up to 5m.