used DAEWOO for sale

Scrubber dryer Daewoo DAFL50A like Hako Scrubmaster new year of manufacture 2022 Brand: Daewoo Type: DAFL50A Year: 2022 Working width: 500 mm Electrical: Yes Hours on display: 0 hr Battery Charger: Yes Electrical connection: 220 V Weight: 160 kg Overall dimension L: 1250 mm Overall dimension B: 550 mm Overall dimension H: 1150 mm Description Including batteries, including charger to 220 volts

Brand Daewoo Model: DDAE10500DSE-3G Year of construction: 2022, New Capacitance (KvA) 8.1 kVa (230v) / 7.5 kVa (400v) Engine brand Daewoo Engine model 500 Motor capacity (Kw) 15 Hp Fuel Diesel Voltage 230-400 Frequency (Hz) 50 Dimensions LxWxH (mm) 880 x 560 x 720 Weight (Kg) ca 165 Number of stucco in stock 100+ Comments Max power: 8.1 kVA (400 V) 7.3 kVA (230 V) Rated power: 7.5 kVA (400 V) 6.7 kVA (230 V) Engine Power: 15hp Displacement: 498 cc Fuel tank capacity: 15 L Oil tank capacity: 1.65 L Run time 50% load: 12 hrs Power factor: 1.25 Socket: 1 x 16 A - 1 x 32 A Output 12V: ✓ Battery: 36 AH Noise level at 7M: 72 - 74 dBA Net weight: 165 kg Dimensions: 880 x 560 x 720

Manufacturer DAEWOO Model PUMA 2000 SY Year 2003 CNC FANUC 18i – T Capacities Swing over bed 600 mm. Swing over saddle 550 mm. Max. turning diameter 330 mm. Max. turning length 510 mm. Travels and feeds X Axis Traverse 250 mm. Z Axis Traverse 580 mm. Y Axis Traverse 100 (±50) mm. B Axis Traverse 580 mm. Rapid feed X Axis 20 m/min. Rapid feed Z axis 24 m/min. Rapid Traverse Y 7,5 m/min Rapid Traverse B 20 m/min. Main Spindle C Axis INCLUDED C Axis index 0.001 º Through hole Ø 76 mm Nose A2#6 Main Spindle Speed Ranges 4.500 rpm. Main Spindle motor power 15 kW Sub-spindle C Axis in sub-Spindle INCLUDED C Axis index 0.001º Sub Spindle through hole Ø 45 mm Sub Spindle Speed Ranges 6.000 rpm Sub Spindle motor power 7.5 kW Turret and driven tools Nº of Station 12 Tool Size 25 mm Turret Indexing Time 0.1 s Living Tool Speed 5.000 rpm. Rotary tool  ...

max. carrying capacity 7 t Vehicle weight approx. 9.6 t

HORIZONTAL LATHE DAEWOO PUMA TT1800SY :::SPECIFICATIONS::: CNC Model: Fanuc - CNC Version: 18iTB - Main Spindle Nose: ASA 6 - Main Spindle Power: 22.4Kw Main spindle bar clearance: 65mm - Turning diameter: 230mm - Turning length: 980mm - Main spindle speed: 5000 Number of Tool Turrets: 2 Number of first turret tool slots: 12 Number of first turret motors: 12 First Turret X-Axis Travel: 165mm First Turret Y-Axis Travel: +- 50mm First Turret Z-Axis Travel: 700mm Second Turret X-Axis Travel: 190mm Second Turret Z-Axis Travel: 720mm Sub-spindle: yes Spindle nose: ASA 6 Sub-spindle speed: 5000 Power against spindle: 22Kw Bar feeder model and brand: Iemca Master 880 HD UP/R Chip conveyor: belt conveyor :::D DIMENSIONS AND WEIGHT::: Length: 3905mm Width: 2050mm Height: 2050mm Weight: 8800Kg

FLOOR SCRUB CLEANING machine DAEWOO DAFL50A NEW, NEVER USED, YOM 2022 COMPLETED BY EL. BATTERY AND CHARGER NETTO WEIGHT 160 KG TWO AVAILABLE LOCATION - POLAND WE HAVE ADDITIONAL TWO SIMILAR CLEANING MACHINES KREMER KR-FL50A IN NEW CONDITION AND THE SAME PRICE.

rated capacity: 8,1 kVA voltage: 400 / 230 V frequency: 50 Hz tank capacity: 15 l engine output: 11 / 15 KW / PS weight of the machine ca.: 0,165 t dimensions of the machine ca.: 0,88 x 0,56 x 0,76 m Diesel generator with: - equipped with electric start. - Equipped with automatic voltage regulator. - Air cooled - Mobile. - Direct injection - Low oil level alarm with auto-stop function. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

connected load frequency: 230 V battery: 24V / 100Ah Brush diameter: 510 mm turning speeds: 175 U/min 0: Luft 24 L / s tank capacity: 50 / 50 Liter weight: 160 kg range L-W-H: 1,1 x 0,52 x 1,0 mm Daewoo floor cleaning machine: Packed with battery and charger Theoretical surface cleaning: Output: 2000 m²/h Suction width: 850 mm Cleaning width: 510 mm Max. working area incline: 2% Fresh/waste water tank volume: 50/ 50 L The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Power: 7,5 KW Receiver: 500 L feed pressure: 14 bar liter capacity: 995 l connected load frequency: 400 V weight of the machine ca.: 200 kg dimensions of the machine ca.: 2,0 x 0,7 x ,125 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

rated capacity: max. 8,1 kVA capacity in kVA: bei 400 V - 7,5 kVA rated capacity: bei 230 V - 6,1 kVA power fuel: Diesel 0 tank capacity: 15 l 0: 11 KW cubic capacity: 498 ccm weight of the machine ca.: 165 KG dimensions of the machine ca.: 0,8 x 0,65 x 0,75 m Diesel fuel emergency generator, Power 8.1 KVA, Socket connections: 1 x 400V - 16A, 1 x 230V - 32A, 1 x 230V - 16A, with electric starter, with battery: 32 AH, noise level: 72-74 dBA (7M), automatic voltage regulation (AVR), overload protection, diesel fuel consumption: 1,25 ltr/h at 50% load, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

rated capacity: max. 8,1 kVA capacity in kVA: bei 400 V - 7,5 kVA rated capacity: bei 230 V - 6,1 kVA power fuel: Diesel 0 tank capacity: 15 l 0: 11 KW cubic capacity: 498 ccm weight of the machine ca.: 165 KG dimensions of the machine ca.: 0,8 x 0,65 x 0,75 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centro di lavoro verticale 2 pallet, DAEWOO ACE VC500, SPECIFICHE TECNICHE, Modello CNC Fanuc, Versione del CNC 18-M, Attacco utensile iso 40, Potenza mandrino 15 Kw, Numero Giri mandrino 10000, Numero utensili 30, Corsa Asse X 760 mm, Corsa Asse Y 510 mm, Corsa Asse Z 570 mm, Cambio pallet si, Dimensione pallet 860x560 mm, Carico massimo consentito 300 Kg, Rotopallet si, Alta pressione refrigerante si, Evacuatore truciolo a tappeto, Marca Daewoo, Modello ACE VC500, Anno costruzione 2000, DIMENSIONI E PESO, Lunghezza 3600 mm, Larghezza 3700 mm, Altezza 2935 mm, Peso 9200 Kg, The machine is visible in our warehouse in Gussago BS. Mimu Machine Tools Gussago BS Italy The machining center is a machine tool equipped with a numerical control capable of performing multiple mechanical operations with a single set-up on multiple surfaces of the same work piece. It is generally equipped with sever ...

Fanuc CNC model Version of the CNC 18i - T Main spindle nose ASA 8 Main spindle power 15 Kw Turning diameter 350 mm Turning length 536 mm Main spindle rpm 3500 Number of tool holder turrets 1 Number of tool places first turret 12 Number of fixed tool places first turret 12 First turret X-axis travel 220 mm Z axis travel first turret 580 mm Linear axis rapid feeds X Y Z 30 m/min Counter spindle yes Number of counter spindle revolutions 6000 Bar passage 90 mm Counter spindle Z stroke 500 mm

Used Daewoo Puma 230 MS cnc lathe Year 2003 IEMCA Bar loader Visible in Italy CE

DAEWOO PUMA 8S cnc lathe the machine is of USA origin therefore 220 three-phase it was tested after unloading for 5 years, with a transformer that I no longer own, it was working, new spindle never installed

Daewoo Puma 15 2-axis lathe (700x1500) Self-centering is an autoblock dia. 500

Control type FANUC iSERIES X axis stroke 820 mm Y-axis travel 410 mm Z axis stroke 510 mm Controlled axes 4 (fourth axis set up) Tool turret 20 positions Spindle speed 80/8000 rpm ISO 40 tool holder cone Motor power 9/11 kW Rapid advances : 24 m/min. Command handwheel Chip collection tank Year of installation 2001 CE Weight : Kg. 5.500 Complete with all documentation

Table dimensions: 1200x500 mm Max allowed weight on table: 800 kgs Traverses: Longitudinal traverse: 1020 mm Cross traverse: 510 mm Vertical traverse: 625 mm Spindle taper: BT 40 Speed range: 8000 rpm Equipped with: Electronic handwheel RANDOM tool changer 24 units Internal coolant supply

Unused. Shrinkage Range: 15-63mm, Max Opening: 75mm, Voltage: 380V, Wattage: 3000W, Pressure: 53.5 Mpa Package size: 780x540x1350 Weight incl. packaging: 280 kg

Unused

Rated power: 5.5 kVA; Rated current: 25 A; No load voltage: 243 V; Output current: 20-40 A; Rated output voltage: 96 V; Cyclic duration factor: 40%; Efficiency: 70%; Insulation grade: F; Protection grade: IP21; Arc-start: Contact; 6095

Unused.

Unused.

Unused, shrinkage range 15-63mm, maximum aperture 75mm, 53.5 mpa, power 500 T, 3000W

Unused

Unused

Unused.

Unused

Additional information Compressed Air Plasma Cutting Machine Brand: Daewoo Type: DWCUT-120 Condition: unused and in the original packaging Maximum cutting thickness: max. Cutting thickness 45 mm Connection: 380 volts Adjustable current: 30-120 amps Starting: equipped with "Pilot Arc" duty cycle: 60% duty cycle (120 A) Technology: IGBT Technology Protection: circuit breaker Additional function: plug for CNC control Includes: plasma torch, accessories and protective cover Not included: 380 volt plug

Unused Rated power: 5.5 kVA Rated current: 25 A No-load voltage: 243 V Output current: 20-40 A Rated output voltage: 96 V Maximum cutting thickness: 20 mm Cyclic Duration Factor: 40% Efficiency: 70% Degree of insulation: F Degree of protection: IP21 Bow Start: Contact

Unused, shrinkage range 15-63mm, maximum aperture 75mm, 53.5 mpa, power 500 T, 3000W

Unused. Shrinkage Range: 15-63mm, Max Opening: 75mm, Voltage: 380V, Wattage: 3000W, Pressure: 53.5 Mpa Package size: 780x540x1350 Weight incl. packaging: 280 kg

Condition: Unused, in its original packaging Additional information Magnetic drilling machine Max. drilling diameter: 35 mm Power: 1600 watts Connection: 230 volts Magnet strength: 16000 newtons Speed: 830 rpm Drilling depth: 145 mm Includes: Oil reservoir for cooling and lubrication Security: Fall protection strap

Unused

Unused.

Mig Type: Yes; TIG Type: Yes; AC/DC: yes; Inverter type: Yes; Wire feed unit: Yes; Digital readout: Yes; connection: 380 V; Handbook available: Yes; Machine weight: 45 kg; size L: 1000 mm; dimension W: 500 mm; size H: 900 mm; description: unused,

Mig Type: Yes; TIG Type: Yes; AC/DC: yes; Inverter type: Yes; Wire feed unit: Yes; Digital readout: Yes; connection: 380 V; Handbook available: Yes; Machine weight: 45 kg; size L: 1000 mm; dimension W: 500 mm; size H: 900 mm; description: unused,

Rated power: 5.5 kVA; Rated current: 25 A; No load voltage: 243 V; Output current: 20-40 A; Rated output voltage: 96 V; Cyclic duration factor: 40%; Efficiency: 70%; Insulation grade: F; Protection grade: IP21; Arc-start: Contact; 6095

Mig Type: Yes; TIG Type: Yes; AC/DC: yes; Inverter type: Yes; Wire feed unit: Yes; Digital readout: Yes; connection: 380 V; Handbook available: Yes; Machine weight: 45 kg; size L: 1000 mm; dimension W: 500 mm; size H: 900 mm; description: unused,

Unused, 3 phases, welding wire 0.80-1.2mm, output current 40-350A, 18 sets of welding data memory, 2T/4T function, double pulse function VRD, 4 drive supply, 5 total support

drilling capacity: 35 mm; drilling depth: 210 mm; speed up to N =: 830 rpm; adhesion: 16000 N; power: 1600 kW; connection: 230 V; description: v.v. automatic cooling system; unused; 5637;

drilling capacity: 35 mm; drilling depth: 210 mm; speed up to N =: 830 rpm; adhesion: 16000 N; power: 1600 kW; connection: 230 V; description: v.v. automatic cooling system; unused; 5637;

Rated power: 5.5 kVA; Rated current: 25 A; No load voltage: 243 V; Output current: 20-40 A; Rated output voltage: 96 V; Cyclic duration factor: 40%; Efficiency: 70%; Insulation grade: F; Protection grade: IP21; Arc-start: Contact; 6095

Rated power: 5.5 kVA; Rated current: 25 A; No load voltage: 243 V; Output current: 20-40 A; Rated output voltage: 96 V; Cyclic duration factor: 40%; Efficiency: 70%; Insulation grade: F; Protection grade: IP21; Arc-start: Contact; 6095

Water-cooled multi-function welding machine Brand: Daewoo Type: DAMIG-350GDL Functions: MIG/MAG, TIG & MMA Adjustable current: 30-350 amps duty cycle: 60% duty cycle (250 A) Equipped with: LCD color display Equipped with: water cooler for MIG/MAG torch Includes: water-cooled MIG/MAG torch Includes: TIG torch with accessories Includes: Electronic gas regulator Connection: 380 volts Technology: IGBT Technology Protection: circuit breaker Includes: Manual Condition: unused, in the original packaging

Unused. Shrinkage Range: 15-63mm, Max Opening: 75mm, Voltage: 380V, Wattage: 3000W, Pressure: 53.5 Mpa Package size: 780x540x1350 Weight incl. packaging: 280 kg

Unused, 3 phases, welding wire 0.80-1.2mm, output current 40-350A, 18 sets of welding data memory, 2T/4T function, double pulse function VRD, 4 drive supply, 5 total support

Condition: Unused, in its original packaging Additional information Magnetic drilling machine Max. drilling diameter: 35 mm Power: 1600 watts Connection: 230 volts Magnet strength: 16000 newtons Speed: 830 rpm Drilling depth: 145 mm Includes: Oil reservoir for cooling and lubrication Security: Fall protection strap

Compressed Air Plasma Cutting Machine Brand: Daewoo Type: DWCUT-120 Maximum cutting thickness: max. cutting thickness 45 mm Connection: 380 volts Adjustable current: 30-120 amps Starting: equipped with " Pilot Arc " duty cycle: 60% duty cycle (120 A) Technology: IGBT Technology Protection: circuit breaker Additional function: plug for CNC control Includes: plasma torch, accessories and protective cover Not included: 380 volt plug Condition: unused and in the original packaging