used deckel fp2

DECKEL FP2 NC Dialog 11 Universal Milling Machine Milling Machine Travel X/300 Y/300 Z400 mm (340 mm for universal table in Z-axis) Speed infinitely variable 31.5 ... 5000 rpm Feeds 2-4000 rpm Rapid traverse 4000m/min Tool holder SK 40 Pinole stroke 80 mm Machine weight 1345 kg Main drive 5.5 kW Power consumption 11 kW The machine is currently being revised.

Lid FP 2 NC Used machine (good condition) Control type NC Built in 1987 Operating hours n/a Price 9,900 € net plus VAT Dimensions 1325 x 1315x 1845 Weight 1450 kg Location 35708 Haiger The machine was part of a training workshop, it is made of 1st hand and has few hours of operation. Travel routes; x = 300, Y = 300, Z = 400 mm Speed range: 31.5 - 3150 rpm DESCRIPTION CNC milling machine lid FP 2 NC year: 1987 Control: 3-D web control dialog 4 Can also be operated manually via handwheels Travel paths; x = 300, Y = 300, Z = 400 mm Voltage: 380 volts Speed range: 31.5 - 3150 rpm power, 1.6/ 2.0 kW WZ recording, SK 40 Hydraulic Tool Clamping Rigid Angular Table Table Size: 620 x 390 mm Electronic handwheel Coolant device Machine light Spray protection cabin Accessories: operating and programing instructions, electrical circuit diagrams, WZ-holders Weight: 1450 kg Dimensions: L  ...

Lid FP2A D11! needed! FP 2A SK40 / with dialog 11 control Control: CNC dialog 11 - 3D contouring speed: 40-4000 RPM Feed: 2-3600 mm / min stepless Rapid traverse rate: 4 m / min Drive capacity: 1,6 / 2,0 kW 1400/2800 RPM Quill: Telescopic spindle vertical 80 mm SK40 with clamping system DIN 2080 Travel: X/Y/Z: 300/300/400 mm round table: 3 axle universal rotary table 600 x 330 mm of Max load 250 kg Equipment: Hydro-mechanic clamping system SK40 with pull Stud DIN 2080. Vertical & horizontal spindle,. Manually swiveling milling head +/-90 ° Machine lamp Programming: Dialoggeführte programming cycles. Options: E Handwheel / NC rotary table / dividing head, etc. On the machine were all drive motors renews geometry and wedge bars to manufacturer values set, all wear parts replaced, all discs replaced. Universal rotary table overhauled. The ma ...

Cover FP2 FP 2A SK40 / with dialog 11 path control Control: CNC Dialog 11 - 3D Web Control Speed: 40 - 4000 rpm Feed rate: 2 - 3600 mm/min infinitely variable Rapid speed: 4 m/min Drive power: 1.6 / 2.0 kW 1400/2800 rpm Quill: Extendable quill vertical 80 mm SK40 with Clamping system DIN 2080 Travel: X/Y/Z: 300/300/400 mm Rotary table: 3 axis Universal table 600 x 330 mm max load 250 kg Equipment: Hydromechanical clamping system SK40 with suit bolt DIN 2080. Vertical & Horizontal spindle , Milling head manually swivel+/- 90 ° Machine light Programming: Dialog-guided programming with cycles. E-handwheel.

Spindle speed 4000 RPM Dialog 11 control Toolholder SK 40 Feed power consumption approx. 10 kVA Weight approx. 1400 kg traverse path X / Y / Z 307 / 303 / 400 mm Accessories: dividing attachment, coolant system, Electr. Handwheel

DECKEL FP2A Universal toolroom milling machine CNC Control GRUNDIG Contour 3 Rigid angle table 390x620 mm X/Y/Z: 300 x 300 x 400 mm Spindle quill 80 mm Spindle speed 40…4000 rpm Feed 2-3600 mm/min SK 40 Spindle motor 1,6/2,0 kW Weight 1295 kg

fully functioning used 3 axis milling machine, brand lid, type FP2, with vice, and many accessories.

x-travel 300 mm y-travel 300 mm z-travel 400 mm CNC control DIALOG 11 Spindle speeds 31 - 5,000 rpm Spindle holder ISO 40 Table size 620 x 390 mm Table load 250 kg Feeds infinitely variable 2 - 6,000 mm/min Drive power 5.5 kW Pinole stroke 80 mm Coolant device Operating voltage 380 V Total power requirement 11.0 kVA Machine weight approx. 1.65 t Space requirement approx. 1.85 x 1.90 x 1.80 m Electrical cabinet 1.35 x 0.70 x 1.70 m Coolant box 1.00 x 0.45 x 0.20 m

x-travel:1000 mm y-travel:320 mm z-travel:400 mm Table dimensions:1000 x 400 mm

Length: 1600mm, width: 1400mm, height: 1600mm, weight: 1.25t, with documentation and accessories, an inspection is possible.

Condition: used very good, ready for immediate use Specifications: – Control: DIALOG 4 – Travel approx.: X: 300 mm, Y: 300 mm, Z: 400 mm – Table dimensions approx.: 620 x 390 mm – Tool holder: SK 40 – Weight approx. 1,600 kg – Transport mass approx.: L: 1.90 m, W: 1.50, H: 1.90 m -Accessories, documentation, vice and approx. 20 A SK40 mounts

Dialog 11 Control Speed range 40 - 4000 rpm Rapid traverse 4 m/ min Tool holder SK 40 Feed rate 2 - 3600 mm /min, infinitely variable Connected load approx. 10 kVA Travel X/Y/Z 300 / 300 /400 mm Working spindle vertically and horizontally Extendable quill 80 mm Milling head swivel +/- 90° Accessories: coolant device, electr. Handwheel Cabin with protective device ( When opening of the cabin door stops the milling spindle ). Very good original condition! The axes and milling spindle run quietly and precisely. Geometry in X/Y/Z axis 0.015/0.01/0.015 mm Spindle concentricity to 300 mm/0.012 mm Price: 8500,- EUR excl. VAT free loaded from warehouse Tirschenreuth

x-travel: 800 mm y-travel: 400 mm z-travel: 300 mm digital readout: Heidenhain table surface area: 1000 x 520 mm turning speed range: 40 x 2000 U/min spindle taper: SK 40 total power requirement: 2,2 kW weight of the machine ca.: 2,2 t dimensions of the machine ca.: 1700 x 1600 x 1800 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Article number: 27-06-063 Manufacturer: Chip Anne, Lid Mint condition Custom-fit seat and paint finish in RAL according to customer requirements Shipping time: All rights reserved. Year of construction: NEW L x W x H: approx. 1000x1000x200mm Weight: approx. 4kg suitable: FP2 & FP3 FP2 Active Digital FP3 Active Digital FP2 Infinitely variable FP3 Infinitely variable

Article number: 07-07-112 Manufacturer: Lid Very good general condition Machine partially overhauled Delivery time: on request - subject to prior sale Year of construction: ca.1978 L x W x H: approx. 2000x1500x1800mm Weight: approx. 800kg Digital display: 3-axis digital display Sino *New* Travel: X-axis: approx. 400mm Y-axis: approx. 200mm Z-axis: approx. 400mm Table clamping surface: approx. 700x350mm Spindle: Speed range: approx. 40-2000 rpm Tool holder: ISO 40 Drive power: approx. 2.2kW Tool clamping: manual Feeds & rapid traverses: in all 3 axes Feed range: approx. 8-400mm/min Rapid traverses: approx. 1.5m/min Accessories  Vertical & horizontal milling device  Work Light *New*  Coolant Device *New*  Complete documentation  Various tension wrenches  3-axis digital display SINO *New*  Spindle protection cap  Horizontal spindle cover ...

Cover FP2: Refurbished Specifications: Tool holder: SK40, M16 tightening spindle Travel X/Y/Z: 400 / 220 / 400 mm Speed range: 25 - 2500 1/min Spindle stroke: 95 mm Feeds: 5 - 500 mm/min Table size: 665 x 375 mm Swivel head: yes Motor power, 2 stages: 2.0 / 3.0 kW Connection: 400 V Weight, approx.: 1250 kg Dimensions (WxDxH), approx.: 1200 x 1470 x 1800 mm Equipment: - 3-axis digital display - Drill quill - Spindle protection - Rapid traverse - Emergency stop push button - Machine lamp - Coolant device - Machine shoes The following work was carried out: - Machine completely disassembled - All bearings replaced - Partially renewed gear pairings - Guided guides ground - Table tops - Universal table ground - Guided tours scraped - Bellows renewed - WZ mount ground - Machine repainted - Glass scales overhauled - Test protocol of the machine geometry acc ...

Operating voltage: 380/400 volts with digital positioning display x,y, without feed in y direction, with angular table, work surface with 4 T-slots Mistakes reserved!

Shock head for cover FP1 and FP2 General overhaul new store and painted. Shock length 80 mm

; very good

Full cab cover FP2NC and FP2A Gene his all overhauled newly painted new Macrolonscheiben complete all parts available incl. hose and grid

Horizontal round table - with bearing tracks Bearing tracks can be easily removed, Geraet fully ready for use without restrictions! Diameter 600mm construction height 140mm Partial setup via angular scale It's immediately available. Further horizontal parts available, please ask price. If you are not able to see what you need, please ask, we have not put the whole stock in place and probably the right one in stock. - Diameter 500mm built-in height 120mm with direct pitch over cam and angle scale - 2 pcs. diameter 400mm, can be used horizontally and vertically, indirect pitch for discs, once as good as new, once with bearing tracks Vertical sub-cameras and universal horizontal / Vertical pivoting sub-cameras 1. Walter with three-jaw lining 2. Lid with three-jaw lining and counter holder Special price

univ. Tool sanding machine p. 1 with Fraesstichelschleifvorrichtung as good as new + drill special admission + Fraeslageraufnahme + instep tongs + Schleifscheiben - Abrichtvorrichtungshaube with diamonds engine power: 0.37 kW 1,450 revos 50 hertz

Why do you need an oil drip tray? Avoid large and expensive damage to your feed motor and the destruction of the drive amplifier. Here a brief explanation: Bed rail oil, which then drips down accumulates at 1. 2 Lands the oil accumulates in the cooling fins of the engine and continues on the way down. At 3, the oil eventually accumulates around then, fatally, after the feed motor to penetrate, which is destroyed as a result. High repair costs and a failure of the machine are the result. But it doesn't have to be. Simply mount the oil drip tray (at no. 2) on the motor (for the spindle drive). The oil drips now at 4 in the tray. Running at 5, the lowest point of the shell in there attached expiration. The oil makes its way through the hose 6 and is headed directly into the oil collecting tray of the machine 7. How to save costly repairs and down time of the machine.

Mechanical dividing head for E.g. FP1 and FP3 all parts complete!refurbished! and repainted Dividing head with the following accessories & #9726;.Faceplate & #9726;.Vise handle & #9726;.Grease gun with a suitable attachment optional accessories & #9726; three-jaw Chuck with key & #9726;.Four-jaw Chuck with key

Data sheet / Offer spare Monitor Deckel Controls Dialog 11 Dialog 12 Overview: - 12,1“ industrial monitors TFT substitute with 14“CRT monitors. - Connection: compatible plug connectors to the very easy installation. - Chassis monitor from high-quality high-grade steel case with compatible connection. Description: The monitor is conceived so he at few minutes of the operator independently after the enclosed instructions it can be exchanged. The control timing is preset i.e. the monitor is ready for use immediately. Micro-adjustments can be changed about the self explicatory menu ON SCREEN arbitrarily by customer wish.The connections for the graphics signal are by a Sub-D conector 25pol. he can not wrong are put on is able marked. The monitor TFT is fastened to the same points like the original monitor and this guarantees easy installation