used EHT for sale

Manufacturer: EHT Werkzeugmaschinen GmbH Type: 250 - 60 Year of construction: 1998 Working length: 6050 mm Pressing force: 250 tons Oil quantity: 400 l Nominal current: 52 A Main fuse current rating: 80 A Main motor power: 22 kW Control Type: DNC 74 PSG

Technical data: -maximum working length 1250 mm -Stand round 1050 mm -Max pressing force 80 t -Stroke 250 mm -Stand RADIUS 300 mm -Max height betw. Table - press bar 560 mm -Lifting speeds -Backward speed idle max 100 mm / sec. -Forward speed 100 mm / sec. -Backward press speed max. 12 mm / sec. -Total power 15 kW -Space requirement approx. B 1750 x H 3400 X 2000 mm -Weight approx. 8500 kg -with: - CNC - control CYBELEC DNC 7400 PSGY -controlled X - axis back gauge 5-1000 mm -Pneum. Z - axis in three stages. height-adjustable -manually movable and foldable stop fingers -controlled pneumatic die shift - hydr. Tool clamping -Manual crowning - 2 piece support arms -Pointed tool shared H 320 x L 1000 mm -Foot tool H 320 mm x L 1000 mm - universal matrix L 1000 mm

Technical data: -maximum cutting width 3050 mm -maximum cutting capacity at 45 KP / mm² 4 mm -hydr... Cutting angle adjustment - number of holders of 18 PCs -Speed up to 24 / min -front angle stop 1100 mm -3 PCs front support arms 750 mm -mot. Backgauge positioning control 5-1000 mm - sheet reversible - cutting line illumination -E - foot switch -Rear area protection with light barrier -Drive 400 V / 9.5 kW -Space requirement approx. B 3900 x H 1850 X 2100 mm -Weight approx. 5.7 t

Force of pressure: 150 t working width: 4500 mm clear stand width: 3050 mm stand projection: 300 mm rear gauge: 1000 mm Electr. Supply: 380 V, 18.5 kW weight: 14.8 t space: 4200 x 2000 x 3000/3150 mm

Ref.-No.00804 Description Hydraulic Press Brake Tools included Manufacturer: EHT Type EHT VarioPress 320 Year of construction 1997 1997 Pressure infinitely adjustable: 3200 kN 320 tons max. working width: 3550 mm 3550mm Working width between uprights: 3050 mm Stand projection: 350 mm Table height: 900 mm Plunger stroke: 270 mm Plunger bevel adjustment: 15 mm With crowning device and quick-clamping device for upper tools Lifting speed: empty 100 mm/s, under load: 10 mm/s, retraction: 100 mm/s Control: DNC 80 PC ( DNC 84 PS= 4 axes

Pressing force 800 kN Bending length 3050 mm Plunger stroke approx. 160 mm Installation height up to 340 mm Dimensions LxWxH: 3750 x 1600 x 2850 mm Weight approx. 7500 kg including tools (see photos)

CNC press brake Manufacturer EHT Type EHPS 20-35 Year of construction 1995 Control DNC800 Bending length 3550mm pressing pressure 200t Block matrices and segments are also available Documentation and operating instructions available Machine was overhauled 3 years ago and put aside. No longer energized.

Force of pressure: 250 t working width: 3550 mm clear stand width: 3050 mm stand projection: 300 mm rear gauge: Yes Electr. Supply: 400 V, approx. 26 kW weight: 20 t space: 2100 x 3800 x 3100 mm

BRAND: EHT YEAR: 1991 MODEL: EHPS 25-30 APPLICATION TYPE: BENDING LOCATION: GERMANY MACHINE TYPE: BENDING MACHINES AVAILABILITY: IMMEDIATELY Technical Information MAIN DRIVE PRESSING FORCE: 2500 KN

BRAND: EHT YEAR: 1998 MODEL: VARIOPRESS 250 60 APPLICATION TYPE: BENDING LOCATION: GERMANY MACHINE TYPE: BENDING MACHINES AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MEASUREMENTS WIDTH: 8400 MM MEASUREMENTS DEPTH: 3900 MM MEASUREMENTS HEIGHT: TOTAL HEIGHT ABOVE FLOOR: 4070 MM, TOTAL DEPTH UNDER FLOOR: 950 MM MACHINE WEIGHT: 42800 KG CONTROL UNIT BRAND: CYBELEC MODEL: DNC70 MAIN DRIVE PRESSING FORCE: 2500 KN BENDING LENGTH: 6050 MM Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - DISTANCE BETWEEN MACHINE UPRIGHTS: 5550 MM - COLUMN PROJECTION: 350 MM - RAM STROKE: 270 MM - DISTANCE BETWEEN TABLE AND RAM: MIN. 360 MM TO MAX. 630 MM - STROKE SPEED: IDLE MAX. 100 MM/S, PRESS STROKE MAX. 8 MM/S, RETRACT MAX. 100 MM/S - COLUMN WIDTH: 5550 MM QUALITATIVE MACHINE BENEFITS: - HYDRAULIC PRESS BRAKE EHT VARIOPRESS 250 ...

pressure: 1500 kN chamfer lenght: 3550 mm distance between columns: 3044 mm Control: Cybelec 34 PS-CN column arm: 350 mm max. ram stroke: 220 mm dimensions of the machine ca.: 3200 x 4200 x 2100 m sheet support: hinten / back number of support arms: 2, verschiebbar / adjust. die shift: hydraulical tool clamping: upper tool quick change system: crown: 3 sets of tools included The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 5000 mm plate thickness: 6 mm distance between columns: 5030 mm throat: 340 mm weight of the machine ca.: 14 t dimensions of the machine ca.: 5500 x 2250 x 2200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 320 t chamfer lenght: 7250 mm distance between columns: 6550 mm Control: throat: 400 mm ram - range of adjustment: 270 mm stroke: 270 mm table surface area: 7250x400 mm dayligth: 560 mm fence: 5-1000 ja /nein total power requirement: kW weight of the machine ca.: 53 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 6000 mm plate thickness: 6 mm distance between columns: 610 mm Control: Elgo 87 P2 total power requirement: 15 kW weight of the machine ca.: 22 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 t chamfer lenght: 6050 mm distance between columns: 5500 mm Control: Cybelec type: ModEva 12 S total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 125 t chamfer lenght: 3050 mm distance between columns: 2550 mm throat: 300 mm stroke: 240 mm dayligth: 640 mm quantity of oil: 250 l : total power requirement: kW weight of the machine ca.: 15,00 t dimensions of the machine ca.: m • Cybelec ModEva PAC touch screen control, retrofitted • Pilz safety barrier retrofitted • controlled axes: Y1, Y2, X, R • 6 stop fingers can be moved laterally • Pneumatic die displacement • Upper and lower tool clamping automatically • 2 support arms on linear guides • CNC controlled crowning • Tool package consisting of: • Lower tool V6, segmented • Punch straight H 192, length = 3050mm Replacement blades are not included. Can be ordered in different radii. • Stamp offset H 220, length = 6x250mm Dimensions: approx. L 4.05 x W 1.80 (plus support arms) x H 2.90 m The data for this ad was created with ModulMWS - the softwar ...

pressure: 125 t chamfer lenght: 3550 mm distance between columns: 2250 mm throat: 300 mm stroke: 240 mm dayligth: 640 mm quantity of oil: 250 l Control: total power requirement: kW weight of the machine ca.: 12,00 t dimensions of the machine ca.: 3,90 x 1,80 x 3,00 m • Control: Cybelec DNC 80 2D graphics • Upper tool clamping automatic • Lower tool clamping 90mm and 13mm • controlled axes: Y1, Y2, X1, X2, R, Z1, Z2 • motorized crowning • 6 x V block die length 3,500, segmented: with V12/30°, V40/80°, V24/80°, V10/30°, V24/30°, V16/30° • Straight punch, H 350mm / approx. 70°, length 3060 mm, segmented The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 150 t chamfer lenght: 4050 mm distance between columns: 3050 mm column arm: 350 mm dayligth: 430 mm piston stroke: 220 mm table width: 300 mm oil volume: 390 ltr. pressure: 265 bar total power requirement: 18,5 kW weight of the machine ca.: 13.000 kg range L-W-H: 4900 x 2250 x 3200 mm from a maintenance workshop Furnishing: - CYBELEC CNC control, model DNC 30 - Swivel control, right front - controlled axes Y1 + Y2 + X + R - CNC motorized table crowning - hydraulic upper tool clamping - Pneumatic lower tool clamping - 2x front pneumatic bending aids - 2x free-moving 2 hand controls/foot controls - lateral protective device (protective grille) - rear protective device (protective grille) - Operation manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 150 t chamfer lenght: 3550 mm distance between columns: 3050 mm Control: Cybelec DNC 880S stroke: 700 mm throat: 350 mm weight of the machine ca.: ca. 15.000 kg height of the machine: 3.900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 170 t chamfer lenght: 4050 mm quantity of oil: 350 l control voltage: 24 kW control: CYBELEC ModEva 10S total power requirement: 27,5 kW weight of the machine ca.: 14800 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 225 t chamfer lenght: 6050 mm distance between columns: mm Control: CYBELEC DNC 1200 PS total power requirement: 18,5 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1500 mm plate thickness: 4 mm back stop - adjustable: 10-1000 mm no. of strokes: ca. 20 Hub/min cutting angle: 1 ° table height: 850 mm total power requirement: 8 kW weight of the machine ca.: 3300 kg dimensions of the machine ca.: 2500x2000x2000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 175 t chamfer lenght: 3050 mm voltage: 3x400 V control voltage: 24 kW : 80 A frequency: 50 Hz : DNC 1200PS PressCad : 18,5 kW quantity of oil: 350 l height of the machine: 3360 mm weight of the machine ca.: 12700 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

fabric-no.: 202 395 working length: 2550 mm output: 2000 KN tracking travel: 13 mm safety distance: 176 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 125 t chamfer lenght: 3550 mm distance between columns: 3050 mm column arm: 300 mm stroke of ram: 240 mm quantity of oil: 200 l rated current: 27 A total power requirement: 11 kW weight of the machine ca.: 14000 kg dimensions of the machine ca.: 5675X3040X2900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 135 t chamfer lenght: 3050 mm distance between columns: 2550 mm stroke: 250 mm quantity of oil: 300 l frequency: 50 Hz : 63 A voltage: 3 x 400 V total power requirement: 21,5 kW weight of the machine ca.: 11260 Kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 150 t chamfer lenght: 4050 mm distance between columns: 3550 mm Control: CYBELEC ModEva Pac throat: 350 mm distance between table / ram: 430 mm table width: 250 mm stroke: 250 mm total power requirement: 18,5 kW weight of the machine ca.: 16500 kg dimensions of the machine ca.: 4400x2100x3200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3000 mm plate thickness: 10 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 175 t chamfer lenght: 4050 mm Control: DNC 1200 PS weight of the machine ca.: kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 125 t chamfer lenght: 3550 mm distance between columns: 3050 mm column arm: 300 mm stroke of ram: 240 mm quantity of oil: 200 l total power requirement: 11 kW weight of the machine ca.: 14000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 110 t chamfer lenght: 2550 mm quantity of oil: 390 l The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 125 t chamfer lenght: 5050 mm control: Cybelec ModEva Y-rapid travel: 100 mm/s : 10 mm/s : 100 mm/s oil volume: 250 l The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 300 t chamfer lenght: 3050 mm quantity of oil: 400 l dimensions: 4550x3000x3700 mm weight: 19000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3050 mm plate thickness: 10,0 mm thickness at Niro-steel: 6,0 mm cutting angle adjustment: 0,5 - 2,5 ° cutting gap adjustment: 0,05 - 1,0 mm back stop - adjustable: 10 - 1000 mm adjustment speed: 180 mm/s down holder: 14 Stück strokes per minute: 12 - 25 oil volume: 300 Liter 0: max. 300 bar voltage: 400 V main drive: 18,5 kW weight of the machine ca.: 10.000 kg. dimensions of the machine ca.: 4080 x 2350 x 2060 mm maintained condition () was serviced annually by the manufacturer TRUMPF / EHT Furnishing: - Baffle-guided metal sheet shears with automatic cutting angle adjustment - Machine frame is an all-steel welded construction Side stands are connected to the machine table - EHT / ELGO CNC control model P-9724, front left control panel for backgauge adjustment and program selection (4 axes) - Automatic cutting angle adjustment - Automatic cutting gap adjustment - Aut ...

sheet width: 3200 mm plate thickness: 4,0 mm distance between columns: 3300 mm daylight opening: OW 400 mm adjustment: UW 80 mm pivoting angle: 180 Grad clamping capacity max.: 200 KN air pressure - required: 4.5 - 6.0 bar total power requirement: 9,8 kW oil volume: 160 l weight: 8500 kg range L-W-H: 4550 x 2530 x 2275 mm well-maintained machine with lots of special accessories () last maintenance/test in JUNE 2023 Furnishing: - CNC screen control CYBELEC model DNC-884-PP32 Swivel control panel, front right - CNC controlled / electro-motorized back gauge pneumatic / lowerable material stop fingers Adjustment speed max. 250 mm/sec. Drive power 0.5 kw Sheet metal support table at the back - motorized lower beam adjustment (S axis) Adjustment range max. 80.0 mm - hydraulic swivel movement of the lower beam - hydraulic movement of the upper beam Adjustment range max. 400 mm Lifting ...

pressure: 225 t chamfer lenght: 3050 mm distance between columns: 2550 mm column arm: 300 mm ajustment speed: 110 mm/sec work speed: 9.0 mm/sec return speed: 130 mm/sec work stroke: 240 mm dayligth: 320 - 560 mm table height: 1000 mm table width: 200 mm oil volume: 350 ltr. operating pressure: max. 296 bar air pressure: 4.5 - 6.0 bar voltage: 400 Volt total power requirement: 18.5 kW weight: 14900 kg range L-W-H: 5180 x 2400 x 3100 mm Furnishing: - electro-hydraulic CNC die bending/press brake - CYBELEC CNC control ModEva 12S, swiveling at the front right High-resolution graphic color screen 14 inches Representation as a line, area or volume drawing of the product Clear, concise menus in the operators language Large tools and products library - CNC-controlled back gauge adjustment (X-axis) Stop range X axis of bending line .. 5.0 - 1.000 mm Adjustment speed .. max. 250 mm/sec. - CN ...

pressure: 150 t chamfer lenght: 4050 mm distance between columns: 3050 mm column arm: 350 mm dayligth: 430 mm piston stroke: 220 mm table width: 300 mm oil volume: 390 ltr. pressure: 265 bar total power requirement: 18,5 kW weight of the machine ca.: 13.000 kg range L-W-H: 4900 x 2740(1890) x 3310 mm from a maintenance workshop Furnishing: - CYBELEC CNC control, model DNC 30 - Swivel control, right front - controlled axes Y1 + Y2 + X + R - CNC motorized table crowning - hydraulic upper tool clamping - Pneumatic lower tool clamping - 2x front pneumatic bending aids - 2x free-moving 2 hand controls/foot controls - lateral protective device (protective grille) - rear protective device (protective grille) - Operation manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: / mm plate thickness: / mm distance between columns: / mm Manufacturer: EHT Type: TSS 20-25 Year of construction: 1994 Max. Cutting length: 2250 mm Max. Sheet thickness: 20 mm Strip width min / max: 10/1000 mm Distance between the consoles: 2530 Height above the ground: 900 mm Table length without extension arms: 3030 mm Oil volume: 800 l Max. Pressure: 280 bar Operating voltage: 400V Control voltage: 230 V. Nominal current: 87 A. Weight: 15.8 to Dimensions L x W x H: 3500 x 2500 x 2400 mm Accessories / special equipment Pneumatic cutting gap adjustment Cutting length limitation Roller conveyor elevation bracket Hand protection 1 bay Multitron control Multitron PS 80, ELCO 85 P Lower knife height adjustment The data for this ad was created with ModulMWS - the software soluti ...

Pressing force: 1250kN, bending length: 2550mm, oil volume: 250l, control: DNC 806 PS/K.

Working length: 3050mm, sheet thickness: 10mm.

This EHT VarioPress 225-30 Bending machine was manufactured in the year 1997 in the Netherlands.

This EHT EHPS 25-30 Bending machine was manufactured in the year 1991. The machine has a pressing force of 2500 kN.

sheet width:3050 mm plate thickness:4 mm total power requirement:9 kW weight of the machine ca.:6 t dimensions of the machine ca.:3900 x H 1850 x T 2100 mm

Description: Year of construction 1989 Pressure 150 t Bending length 4050 mm Stand width 3050 mm Stand projection 350 mm Installation height 430 mm Piston stroke 220 mm Table width 300 mm Oil content 390 liters Pressure output 265 bar Total power requirement 18.5 kW weight approx.: 13,000 kg, Approx. Onsite Dimension. (l x w x h): 4,900 x 2,740 x 3,310 mm

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, hydraulic buffers, pressure boosting cylinders -Hydraulic cylinder: from press brake EHT type EHP 11-40 -Piston rod: Ø 155 mm -Stroke: 250 mm -Number: 2x cylinders available, 1x left / 1x right -Price per piece -Dimensions .: 855/285/380 mm -Weight: 311 kg / pc.

Stop for press brake, edging bench, guillotine shears, drive shaft -Drive shafts: for stop, from press brake EHT type EHP 11-40 2 pieces -Length: 515 mm -Socket: Ø 25 mm -Price: complete -Dimension: Ø 50 x 515 mm -Weight 5.1 kg / pc.

Bending tool, die, upper knife, upper tool, straight tool, die tool, seam closing tool -Tool: from press brake EHT type EHP 11-40 -Measures: see drawing in the photos -Dimension: 4050/45 / H130 mm -Weight: 147 kg