used EMAG for sale

Inv. Num. : 4723 Type: VL 5S Producer: Emag Created: 2007 Parameters: Control system: Siemens 840 SL Maximum turning diameter: 260 mm Tool holder: 12 pieces Lathe length: 3800 mm Lathe width: 2100 mm Lathe height: 2400 mm Lathe weight: 7000 kg

Inv. Num. : 5794 Type: VSC 250 DS Producer: Emag Created: 2007 Parameters: Control system: Siemens Maximum turning diameter: 250 mm Maximum turning length: 100 mm Axis X: 680 mm Z axis: 200 mm Nominal current: 35 kW Weight: 7500 kg

Vertical CNC centre lathe, uses / outdated machine type: Emag VSC 200 control: Siemens 840 C construction year: From the in 1995 to the in 2007 overtakes TECHNICAL DATA: speed area / speeds: [1 / min].: 6,000 Drehmoment:/torque [Nm]: 480 Max dreh-? over bed swing diam .: 290 mms impulse achievement / power: [kW] 34 feed ? / chuck diam. 200 mms revolver / turret: 12-fold, VDI 40, shoemaker powered work witness / driven tools 7.8 kW Verfahrwege: X axis / x-travel: 550 mms Z-Achse/z-travel: 200 mms express way / rapidly travel: (X/Z) [m / min] 30 / 20 prepush / feeds: (X/Z) [m / min]. 11 KN connected load: [KW] 36 kW machine weight: [kg] 6,500 equipment signs: filings sponsor / chip conveyor, crowd

GENERAL Project No.: 905623 Quantity: 1 pc. Manufacturer: EMAG Type: VL 3 Control: Siemens 840 D solutionline Year of construction: 2018 Condition: Used machine Program run approx. (hrs.): 28,500 DESCRIPTION TURN Max. turning diameter 210 mm Max. turning length 100 mm Max. circulation diameter over bed cover 210 mm Max. speed main spindle 7500 1/min Max. power main spindle at ED 10-40/100% 25/16 kW Max. torque main spindle at ED 10-40/100% 200 Nm Spindle diameter in the front bearing main spindle 80 mm Spindle flange size main spindle size 5 (DIN 55026) Axes on the main spindle unit X/Z Travel in X/Y/Z Main spindle unit 400/-/200 mm Max. rapid traverse speed in X/Y/Z Main spindle unit 60/-/30 m/min Feed force in X/Y/Z Main spindle unit 5000/-/5000 N Direct Displacement Measuring System Main Spindle Unit X/Z Full-clamping cylinder on the main spindle Rev ...

Turning center USC 11, Emag – used - : Price from location: 29.500.-€ (net), plus dismantling etc.! System designation turning center USC 11 Manufacturer: EMAG Year of construction: 2006 Available: now Condition: good - very good Location: Hamburg area Technical data of the machine: Current Chuck passage max 160 mm X-travel 300 mm Z-travel 300 mm Main spindle bore 180 mm maximum speed 2000 rpm Motor main drive 80KW full power from spindle speed 500 rpm Feed rapid traverse speed. in X 35 m/min Feed rapid traverse speed. in Z 35 m/min Maximum power for X and Z 4.1 KW Maximum torque for X and Z 13 KW Operating voltage 400 V Control voltage - DC 24 V AC 230 V Frequency 50 Hz Connected load 130 KW Supply fuse 250 A Weight approx. 20,000 kg Description of the plant components: Machine bed length 3000 mm Cross slide 2-axle Motor lockers: frequency-con ...

BRAND: EMAG YEAR: 2006 MODEL: VL 3 APPLICATION TYPE: TURNING LOCATION: HUNGARY MACHINE TYPE: LATHE AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MEASUREMENTS WIDTH: 2500 MM MEASUREMENTS DEPTH: 1900 MM MEASUREMENTS HEIGHT: 2300 MM MACHINE WEIGHT: 5500 KG CONTROL UNIT BRAND: SIEMENS MODEL: SINUMERIK MAIN DRIVE SPINDLE SPEED RANGE: 7500 1/MIN Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - MAX. TURNING DIAMETER 210 MM - MAX. CHUCK DIAMETER 210 MM - MAX. SPINDLE POWER ED 10-40/100% 25/16 KW - MAIN SPINDLE SIZE GR. 5 (DIN 55026) - AXES ON THE SPINDLE UNIT X/Z - FEED RATE X/Y/Z 5000/-/5000 N - MAIN SPINDLE TRAVELS X/Y/Z 400/-/200 MM - MAX. RAPID TRAVERSE SPEED X/Y/Z 60/-/30 M/MIN - LOWER REVOLVER 12 TOOLS - TOOL HOLDERS VDI 40, DRIVEN TOOL REVOLUTION 6000 1/MIN

BRAND: EMAG YEAR: 2002 MODEL: VL 3 APPLICATION TYPE: TURNING LOCATION: HUNGARY MACHINE TYPE: LATHE AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MEASUREMENTS WIDTH: 2500 MM MEASUREMENTS DEPTH: 1900 MM MEASUREMENTS HEIGHT: 2300 MM MACHINE WEIGHT: 5500 KG CONTROL UNIT BRAND: FANUC MODEL: SERIES 18I-T Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - MAX. TURNING DIAMETER 210 MM - MAX. CHUCK DIAMETER 170 MM - MAX. SPINDLE POWER ED 10-40/100% 25/16 KW - MAIN SPINDLE SIZE GR. 5 (DIN 55026) - AXES ON THE SPINDLE UNIT X/Z - FEED RATE X/Y/Z 5000/-/5000 N - MAX. RAPID TRAVERSE SPEED X/Y/Z 60/-/30 M/MIN - MAIN SPINDLE TRAVELS X/Y/Z 400/-/200 MM - LOWER REVOLVER 12 TOOLS - TOOL HOLDERS VDI 40 QUALITATIVE MACHINE BENEFITS: - DRIVEN TOOL REVOLUTION 6000 1/MIN

Vertical CNC Lathe Manufacturer EMAG Type VL2 Y Year of construction 2016 Control Fanuc max turning diameter 100mm turning height 150mm Chuck diameter 160mm 12 x BMT 55Tool carrier unit for driven tools Circumferential workpiece conveyor belt 27 pcs Coolant supply 15bar Conveyor Workpiece measurement Machine is connected to another Emag VL2 Machine is in TOP condition

Vertical CNC Lathe Manufacturer EMAG Type VL2 Y Year of construction 2015 Control Fanuc max turning diameter 100mm turning height 150mm Chuck diameter 160mm Y-axis 12 x BMT 55Tool carrier unit for driven tools Circumferential workpiece conveyor belt 27 pcs Coolant supply 15bar Conveyor Workpiece measurement Machine is connected to another Emag VL2 Machine is in TOP condition

BRAND: EMAG YEAR: 2001 MODEL: VL3 APPLICATION TYPE: TURNING LOCATION: CROATIA MACHINE TYPE: VERTICAL LATHE AVAILABILITY: IMMEDIATELY Technical Information CONTROL UNIT BRAND: FANUC MODEL: SERIES 18I-T

GENERAL Project No.: 905398 Quantity: 1 pcs. Manufacturer: EMAG Type: VL 3 Control: Fanuc 18i TB Year of construction: 2001/2022 State of condition: Refurbished machine Layers approx.: 2-3 layers DESCRIPTION TURN circulation diameter over bed cover 210 mm chuck diameter 170 mm speed main spindle 7500 1/min power main spindle at ED 10-40/100% 25/16 kW torque main spindle at ED 10-40/100% 134/85 Nm Spindle diameter in the front bearing Main spindle 80 mm Spindle flange size main spindle size 5 (DIN 55026) Axes on the main spindle unit X/Z Travel in X/Y/Z main spindle unit 400/-/200 mm rapid traverse speed in X/Y/Z main spindle unit 60/-/30 m/min Feed force in X/Y/Z main spindle unit 5000/-/5000 N Direct displacement measuring system main spindle unit X/Z Full clamping cylinder on the main spindle Revolver bottom Number of stations/driven by 12/12 Tool ho ...

:::TECHNICAL SPECIFICATIONS::: CNC Model: Siemens CNC Version: 840D Main spindle nose: ASA 8 Inverted lathe: yes X axis spindle travel: 850mm Z axis spindle travel: 250mm Stoker or spare parts warehouse: yes Main spindle power: 43Kw Main spindle self-centering diameter: 315mm Turning diameter: 250mm Turning length: 125mm Number of turns main spindle: 4300 Number of Tool Towers: 1 Number of tool places first turret: 12 Number of motorized first turret: 12 First turret tool attachment type: VDI 50 Rapid linear axis feeds X Y Z: 45m/min Chip evacuator: carpet Number of motorized tool holders supplied: 1 Number of fixed tool holders supplied: 10 :::D IMENSIONS AND WEIGHT::: Length: 3380mm Width: 1300mm Height: 2900mm Weight: 7000Kg

Year of construction: 2011 Control Siemens 840 Dsl Rotation diam. [mm] 250 Spindle: Motor spindle technology Speed 6,000 rpm Power (max.) 39 kW Torque (max.) 460 Nm Clamping cylinders Full clamping cylinders Workpiece clamping 3-jaw chuck, SMW autoblock, KNCS-NB-260-72 Tool carrier I: Technology turret with 12 stations Tool holder VDI 40 Tool drive 6,000 rpm, 7.5 kW, 24 Nm Tool carrier II: Technology:Drilling station with IK feed Tool holder Capto C8 General: Travel in X/Z 1,180/525 mm Rapid traverse in X/Z 60/30 m/min Equipment/accessories: Displacement measuring system directly in X/Z (glass scale) Chip Management Chip Conveyor Coolant management IKZ system with paper belt filter and high pressure Tool breakage monitoring ARTIS CTM Automation of circulating workpiece storage, L-type Oil mist extraction Electrostatic separator, IFS IFE2000

This EMAG VL3 Vertical Lathe was manufactured in the year 2001. It is equipped with a Fanuc Series 18i-T control unit. The machine was refurbished completely in 2022 to have equivalent condition as new machine. See all details of overhaul in attached PDF.

This EMAG VL 3 Lathe was manufactured in the year 2002 in Germany. It is equipped with a Fanuc Series 18i-T control unit. The machine has a spindle speed of 7500 rpm.

This EMAG VL 3 Lathe was manufactured in the year 2006. It is equipped with a SIEMENS SINUMERIK control unit. The machine has a spindle speed of 7500 rpm.

This EMAG VL2 Lathe was manufactured in the year 2016 in Germany and has 70761 production hours. It is equipped with an EMAG control unit. The machine disposes of 3 axis.

This EMAG VSC 250 Duo Lathe was manufactured in the year 2002. It is equipped with a SIEMENS control unit. The machine has a spindle speed of 6000 rpm.

Article: Vertical turning and grinding centre Manufacturer: EMAG Type: VSC 250 DS Yob: 2008 Control: SIEMENS 840D Grinding spindle speed: 30,000 rpm Rotation spindle speed: 3,000 rpm Tool places turret: 12 Cooler for spindle and machine bed cooling Cooling lubricant - lifting station (no independent cooling lubricant supply) Chip conveyor Parts handling Air through the spindle Two clamping circuits through the spindle (air and oil) Unfortunately, the grinding spindle is defective. However, this can be overhauled in a spindle factory. Otherwise the machine is in a very good condition and fully functional. Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

swing diameter:200 mm weight of the machine ca.:15 t Distance between tips:832,5 mm turning length:380 mm with chip conveyor and belt filter press, infeed and outfeed belt 2 x 12-position revolvers

turning diameter:200 mm swing diameter:260 mm turning height:60 mm

turning diameter:175 mm turning height:70 mm chucking diameter:175 mm

weight of the machine ca.:8 t dimensions of the machine ca.:2,95 x 1,6 x 2,36 m chucking diameter:250 mm swing diameter:265 mm x-travel:170 mm z-travel:200 mm spindle turning speed range:1.500 U/min spindle bearing diameter:100 mm Pick-up machine

turning diameter:260 mm turning length:200 mm control:SIEMENS 840 C WORKING RANGE TURNING:. - turning diameter (max):260 mm - workpiece length (max):200 mm - workpiece weight max.:50 kg MAIN SPINDLE:. - spindle bore diameter:50 mm - spindle revolutions (min):10 /min - spindle revolutions (max):6000 /min - torque (max.):460 Nm - spindle diameter:100 mm ELECTRICAL SPECIFICATIONS:. - total power consumption:30 kW - mains power supply:40 kVA - mains voltage:400 V - mains frequency:50 Hz DIMENSIONS / WEIGHTS:. - space requirements length:3160 mm - space requirements width:1200 mm - total height:2650 mm - total weight approx.:6500 kg

Description: EMAG VTC 250 with automation C-axis, driven tools with automation (tool assemblies) 250mm machining weight approx.: 15,000 kg, Approx. Onsite Dimension. (l x w x h): 4,000 x 2,600 x 3,200 mm

Description: no documentation available turning diameter: 260 mm, Drehlänge: 200 mm, control: Siemens 840 C, spindle bore: 50 mm, weight approx.: 6,000 kg, Approx. Onsite Dimension. (l x w x h): 3,160 x 1,200 x 2,650 mm

control: Siemens 840-D tool taper: HSK & VDI 40 - - -: - - - - - - Vertical Turning Machine | EMAG - VTC 250 DUO ED with ITC (7-30 bar) and driven tools Additional equipment: - Workpiece grippers on all 3 turrets, - 6-station end-processing turret with HSK tool holder, - 12-station disc turret for driven tools and VDI 40 tool holder, - 12-position disc revolver with cross slot and VDI 40 tool holder, - NC - clamping head, - NC bezel, self-centering, - EMAG hydraulic double-piston clamping cylinder, - tailstock down, - Hydraulic double-piston clamping cylinder at the top, - chip conveyor, - Knoll plant 1.500 l, - Coolant supply 7-30 bar, - OP20: shaft chuck with retractable jaws and face drivers, - Tool holder with Capto 5, - Artis quick-change system for tool and process monitoring, - Tool pack is included, The machine is in a well-maintained condition and can be inspected at any time  ...

control: Siemens 840-D tool taper: HSK & VDI 40 - - -: - - - - - - Vertical Turning Machine EMAG - VTC 250 DUO DD with ITC (7-30 bar) and driven tools Additional equipment: - Workpiece grippers on all 3 turrets - 12-position disc turret for driven tools and VDI 40 tool holders, - 12-station disc turret with cross-slot and VDI 40 tool holders, - 12-station disc turret for driven tools and VDI 40 tool holders, - NC steady rest, self-centering, - headstock below, - tailstock below, - chip conveyor - Knoll unit 1.500 l, - OP10: Three-jaw chuck Rhöm KFD-N 220/3, - OP20: Hainbuch Spanntop pull-back BZI65, - Live tool for axial and radial machining, - Tool holder with Capto 5 quick change system, - Artis as tool and process monitoring, The machine is in a well-maintained condition and can be inspected at any time under power. A machine video from the production plant will be shared on reques ...

max. swing over bed: 260 mm max. turning diameter: 315 mm control: SIEMENS 840D spindle bore: 50 mm spindle diameter in front bearing: 100 mm Torque: 460 Nm chucking diameter: 200 / 250 mm with 1-bed slide: number of cross-slides: 1 tool taper: HSK C63 numbers of positions in the tool changer: 12 max. tool diameter: 40 mm Dimensions (L x W x H): 5.500 x 11.600 x 3.300 mm weight of the machine: 12.500 kg 6-axis vertical CNC Turning & Grinding Center | EMAG - VSC 400 DDS Additional equipment: - Robotorsierte Werkstückladeeinheit (AMT Automation with Kuka) The machine is in very good condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VSC400DDS | VSC400 DDS | VSC-400 DDS | VSC 400DDS | VSC 400-DDS The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- - -: - - - - - - - - -: - - - - - - - - -: - - - - - - Vertical Turning Machine | EMAG - VL2 equipped with a workpiece conveyor belt. The machine is in very good condition. Technical data of the machine will follow soon. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL-2 | VL 2 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- - -: - - - - - - - - -: - - - - - - - - -: - - - - - - Vertical Turning Machine | EMAG - VL2 equipped with a workpiece conveyor belt. The machine is in very good condition. Technical data of the machine will follow soon. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL-2 | VL 2 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

chucking diameter: 250 mm swing diameter: 260 mm travel -x axis: 570 mm travel -z axis: 200 mm control: FANUC 18 i-T Turning speeds mainspindle: 4500 U/min numbers of positions in the tool changer: 12 Dimensions (L x W x H): 3.700 x 1.500 x 2.400 mm weight of the machine: 6.500 kg main drive motor: 15 kW turret 12 station: VDI 40 machine is equipped with a closed standard autom. loader: for 12 workpieces 80 mm-220 mm for 14 workpieces 30 mm-160 mm for 28 workpieces 30 mm-85 mm max. total load 120 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 250 mm turning length: 100 mm control: SIEMENS 840 D total power requirement: 35 kW weight of the machine ca.: 7500 kg dimensions of the machine ca.: m E M A G (Germany) Vertical CNC Controlled Hard Turning and Grinding machine with tool turret and workpiece handling System Model VSC 250 DS Year 2004 # M7 28.69324 _______________________________________________________ Turning Ø, max. 250 mm Turning length internal / external 100 mm Workpiece length min./max. 29 – 100 mm 6-positon tool turret Ø / swing-Ø 480/790 mm Workpiece spindle Slide travel, X / Z / stroke 680 / 400 / 200 mm Feed rate / Quick feed X/Z 45/30 m/min. Feed force X/Z 5,5/11 kN Spindle speed 4.300 / 6.000 rpm Spindle drive 28 kW Total electrical load, ...

centre height: 235 mm turning diameter: 470 mm turning speeds: 2700 U/min turning length: 1500 mm inkl. Zubehör (siehe Bilder) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

There are three identical machines available, x-travel: 850mm, z-travel: 160mm, max. workpiece length/ diameter: 80/ 130mm, max. chuck diameter: 160mm, connected load: 48kW, controls: SIEMENS 840D, weight: 9.6t, including one headstock, one of the machines is missing the control cabinet.

X-travel: 400mm, z-travel: 200mm, swing: 210mm, max. rotational speed: 5000/min, controls: FANUC, with handling, machine needs overhauling.

There are three EMAG VCS 200 available, connected load: 36kW, without tools, with documentation, were maintained regularly.

There are two identical Emag VSC 200 available, x-travel: 685mm, z-travel: 160mm, chuck diameter: 200mm, circumferential diameter: 290mm, connected load: 29kW, controls: SIEMENS SINUMERIK, length: 2700mm, width: 1150mm, height: 2800mm, weight: 6.5t, with documentation.

EMAG VSC630 CNC vertical lathe, inverted spindle Line consisting of 2 CNC Pick up lathes complete with workpiece handling: loading/tilting/unloading MAKE EMAG MODEL VSC630 CNC SIEMENS 840 1998 X 1150 mm Z 500 mm Max dia 680 mm Chuck 500/630 Spindle power max 74kW / 2350 Nm Spindle RPM max 2000 Rapidi (X, Z) 30 / 20 m/min Tool turret 8 pos / 60 mm shank dia. Weight 2 x 22000 kgs Note: Visibile funzionante nel nostro magazzino - Under power in our warehouse – Unter Strom in unserem Lager Tech. Data not binding

Three axes + revolver turret with twelve driven tools + automation. Turning diameter: 160 mm Turning height: 150 mm Table/pallet diameter: 100 mm Turning power: 19.5 kW Z axis carriage travel: 375 mm Number of tools: 12 Pallets: Yes Length: 7000 mm Width: 3500 mm Height: 3100 mm Weight: 5500 kg

- max turning diameter : 400 [mm] - max. turning length : 160 [mm] - min. turning length : 29 [mm] - strokes (X/Y/Z) : 820 / 315 [mm] - max. trust on X and Z : 1100 [daN] - main motor power : 71 [kW] - working feeds : 0 - 11.000 [mm/min] - quick feeds (X/Z) : 40 / 30 [m/min] - ball screw diameter (X/Z) : 50 / 40 [mm] - chuck rotation speed : 0 - 4000 [rpm] - chuck maxi torque : 750 [Nm] - Number of positions on turret : 12 - type of tool holders : VDI50 - dimensions (W x L x H) : 4.78 x 1.79 x 2,94 [m] - weight : 10 [t] - power settled : 45 [kW] - electrical supply : 400 V, 50 Hz Equipment - NC SIEMENS 840D - C axis - turning tools - 3 jaws chuck SMW Autoblock Ø400 - contact part sensor Marposs - lubricating tank - cooling pump - chips conveyor - a lot of tools