used EMCO for sale

Center height: 200 mm Center distance: 1000 mm Spindle bore: 0 mm Swing over bed Ø:        400mm Swing over cross slide Ø:250mm Spindle bore:            50mm Spindle power:           5kW Tailstock spindle Ø:     50Ø Stroke pinole:           120mm Spindle taper:           3Mk Speeds / ranges:         3000Rpm Length:                  1.900 mm  Width:                   1.000 mm  Height:                  1.300 mm  Weight:                  840 kg 

Center height: 170 mm Center distance: 700 mm Spindle bore: 120 mm MACH-id    5209 MAKE     EMCO Austria TYPE       EMCOmat EM17 D YOP         1998 SPECIFICATIONS Swing over bed Ø     340 mm Swing over cross slide         190 mm DBC Turning length       700 mm Spindle bore       50 mm Bed width          260 mm Quill Ø       50 mm Stroke pinole        120 mm Spindle taper       3 Mk Workpiece weight        150 Kg Power       5,3 kW Speeds / ranges      3000 Rpm Feed rate X-Axis      0.787 mm/min. DIMENSIONS Length       1600 mm  ...

Table length: 800 mm Table width: 400 mm Longitudinal X: 450 mm Cross Y: 300 mm Vertical Z: 350 mm Milling machineEMCO - FB-4 MACH-ID 7588 Make: EMCO Type: FB-4 Year: 2004 Feeds all 3 directions HeidenHain digital read out Motorised ram adjsutment Milling amd drilling pinole Removable housing X-Axis:         450mm Y-Axis:         300mm Z-Axis:         350mm Table Length:   800mm Table Width:    400mm Table load:     400 Spindle speeds: 2500Rpm Feed rate X-Axis:0-4000mm/min. Feed rate Y-Axis:0-4000mm/min. Feed rate Z-Axis:0-4000mm/min. Length:         1500mm Width:          1480mm Height:         1690mm Weight:         1500kg

Center height: 280 mm Center distance: 650 mm Spindle bore: 26 mm Centre latheEMCO - Maximat Super 11 MACH-ID 8579 Make: EMCO Type: Maximat Super 11 Year: 1995 DBC Turning Length:      650mm Swing over bed Ø:        280mm Swing over cross slide Ø:170mm Spindle bore:            26mm Spindle power:           1,4kW Speeds / ranges:         2200Rpm Length:                  1400mm Width:                   800mm Height:                  1200mm Weight:                  1000kg

teach-in touch Siemens control Swing over bed: 515 mm Swing over cross-slide: 328 mm Distance centre tot centre: 1500 mm Dia of spindle bore: 108 mm (option ) Power on the spindle: 10 HP Number of speeds: 16 > 1500 rpm (option ) Command: Siemens Weight: 2270 kg

X-travel: 600mm, y-travel: 400mm, z-travel: 400mm, spindle rotational speed: 63-3150/min, table dimensions: 800x400mm, tool holder: SK40, feed rate: 8-800/min, quill stroke: 105mm, connected load: 4kW, length: 2500mm, width: 2200mm, height: 2200mm, weight: 2.9t, with coolant device, chip guard and tool clamping.

X-travel: 210mm, z-travel: 610mm, swing over bed/ slide: 540/ 360mm, max. turning diameter: 310mm, length: 1730mm, width: 2860mm, height: 1880mm, weight: 4.3t, with Automation FMB unirobot MH5L-XP.

X-travel: 210mm, z-travel: 610mm, swing over bed/ slide: 540/ 360mm, max. turning diameter: 310mm, length: 1730mm, width: 2860mm, height: 1880mm, weight: 4.3t, with Automation FMB unirobot MH5L-XP.

With accessories, documentation and Bar Loader FMV turbo ET 420, available in the third quarter of 2023.

Length: 2580mm, width: 2115mm, height: 1780mm, weight: 2.6t, with accessories, documentation and Bar Loader FMB turbo ET 420, there is another identical machine available as a source for spare parts.

Emco Emcoturn 332 Mc 2 Spindle Ve Taret C Eksen Cnc Torna Ve Çub 2 Spindle 2 turret C axis Chip conveyor Bar feeder(LNS) Maximum turning diameter :140 mm Maximum workpiece length: 580 mm

CNC milling machine with mechanical spindle. Travel in X/Y/Z 350/250/300 mm Spindle nose distance 120-420 mm High movement speeds in X/Y/Z 24/24/24 m/min Clamping surface 520x300 mm Max. table load capacity 100 kg. Number of tool stations 20 Tool change time (tool to tool) 2.5 s Max. tool diameter 63 (80) mm Max. tool length 200 mm. Dimensions (LxWxH) 1600x1700x2200 mm Machine weight 1970 kg.

Emco Emcoturn E45 CNC Lathe C axis 6 inches Fanuc control unit No conveyor or tailstock Bar feeder is not included(Can be bought separately) 12 stations turret and 6 live tools can be used VDI 30 tool holder Diameter : 250 mm Length : 250 mm

Emco Turn 425 MC CNC Lathe 2 bar feeder 2 turret 4 spindle Machine is in good working condition

The EMCOMILL 750 CNC machining center is in very good technical condition. By agreement, it is possible to see under the current. Air cooling, internal cooling 20bar. Machine weight: 9000 kg Clamping surface of the table: 900x630 mm Longitudinal movement of the table - x-axis: 750 mm Transverse table movement - y axis: 550 mm Vertical movement of the table - z axis: 500 mm Spindle speed: 12000 rpm Number of places in the stack: 30 pcs Max. workpiece weight: 800 kg Machine dimensions lxwxh: 3158 x 2970 x 3000 mm

bar material dia.:51 mm turning length:644 mm turning dia. over bed:600 mm turning diameter over slide:430 mm y-axis:100 (+-50) mm turning speeds:2x 5.000 1/min positive location each:2x C-Achse, 0,001° Grad Sub spindle:ja/yes turret (x-stations):2x 12 VDI 30 Pos. driven tools:2x 12 Pos. turning speeds:2x 4.000 1/min control:FANUC 18 iTB total power requirement:30 kVA weight of the machine ca.:8 t dimensions of the machine ca.:3,5 x 2,5 x 2,3 m turning- milling center with Y-axis, collet device on main and subspindle, high pressure pumps 2x 14bar, parts catcher/conveyor, barloader ENTL 10-65, chip conveyor, lot of accessories approx. 54.500 hours "machine on", 30.500 h "automatic", 14.000 h "feeding"

Description: Fabrication number: R3GL9012 Operating voltage: 400 V Frequency: 50/60 Hz Rated current: 27 A Control unit: FANUC SERIES 21-T Turning length: approx. 500 mm Travel distances: Z: approx. 300 mm X: approx. 300 mm Incl. 10-position tool turret Attention: the tool holders in the tool turret are not included in the scope of delivery Tool holder: VDI 30 Incl. bar loader from the manufacturer KUPA Type: 42R weight approx.: 1,500 kg, Approx. Onsite Dimension. (l x w x h): 4,000 x 1,400 x 1,900 mm

Description: Fabrication number: R2EV3202 Operating voltage: 3 x 400 V Frequency: 50/60 Hz Rated current: 33 A Control system: SIEMENS SINUMERIK Turning length: approx. 500 mm Travel distances: Z: approx. 400 mm X: approx. 400 mm Incl. a 12-position tool turret with driven tool stations The machine has a C-axis Attention: the machine is delivered without any visible tool holders Tool holder: VDI 30 weight approx.: 2,500 kg, Approx. Onsite Dimension. (l x w x h): 3,500 x 1,700 x 1,900 mm

Description: Factory number: R6ET1802 Operating voltage: 400 V Frequency: 50/60 Hz Rated current: 38 A Control: SIEMENS SINUMERIK Turning length: approx. 1000 mm Travel: X: approx. 400 mm Z: approx. 600 mm The machine is equipped with a tailstock and a two-jaw chuck from the manufacturer SCHUNK (diameter: 250 mm) Attention: without the tool holders on the tool turret Incl. chip conveyor Tool holder: VDI 30 weight approx.: 4,000 kg, Approx. Onsite Dimension. (l x w x h): 4,000 x 2,000 x 2,000 mm

Description: Fabrication number: S6AY1201 Operating voltage: 3 x 400 V Frequency: 50/60 Hz Rated current: 80 A Control system: SIEMENS SINUMERIK 840 D Turning length: approx. 550 mm Center distance: approx. 680 mm Rotation diameter: approx. 500 mm max Turning diameter over bed: approx. 610 mm Travel paths: X: approx. 300 mm Z: approx. 600 mm The machine is equipped with a 12-position tool turret including driven tool stations as well as a C-axis, a tailstock and a three-jaw chuck (diameter: 230 mm) from the manufacturer SMW-AUTOBLOK Also incl. filter extraction system from the manufacturer LTA and a cooling system from the manufacturer KELVIN Type: KW570.00.CA 0187 Year of manufacture: 2008 And a chip conveyor from the manufacturer KNOLL Year of construction: 2010 weight approx.: 7,000 kg, Approx. Onsite Dimension. (l x w x h): 4,500 x 1,800 x 2,200 mm

Description: Product number 528, test method HR 62.5, packed in a foam case, including accessories Approx. Onsite Dimension. (l x w x h): 1,000 x 550 x 100 mm, weight approx.: 12 kg

Description: Fabrication number: 06AL3001 Operating voltage: 400 V Frequency: 50/60 Hz Rated current: 41 A Control system: SIEMENS SINUMERIK Tool holder: SK 40 Table dimensions: 2 x 850 x 400 mm With 2 x 3 grooves Incl. 4th axis (dividing head) With 24-position tool changer Spindle speed: 6000 rpm (not certain) Attention: screen is defective, therefore replacement monitor Attention: without tool holders and clamping devices that may be visible in the photos Travel distances: X: 1200 mm Y: 410 mm Z: 360 mm Distance from spindle nose to table surface: 175 - 535 mm Milling spindle: Spindle bearing: 60 mm diameter Tool holder: SK 40 Speed range: 0 - 6000 rpm Feed rate X-, Y- and Z-axis: 0.01 - 12000 mm/min Rapid traverse X-, Y- and Z-axis: 24 m/min Feed force X and Y: 5000 N Feed force Z: 8800 N Feed force: 5 kg Max. permissible tool weight: 5 kg Total permissible tool weight in the magazine ...

Description: Fabrication number: 06-70R Operating voltage: 400 V Frequency: 50/60 Hz Rated current: 41 A Control system: SIEMENS SINUMERIK Tool holder: SK 40 Table dimensions: 2 x 850 x 400 mm With 2 x 3 grooves Incl. 4th axis (dividing head) With 24-position tool changer Spindle speed: 6000 rpm (not certain) Attention: without tool holders and clamping devices that may be visible in the photos Travel distances: X: 1200 mm Y: 410 mm Z: 360 mm Distance from spindle nose to table surface: 175 - 535 mm Milling spindle: Spindle bearing: 60 mm diameter Tool holder: SK 40 Speed range: 0 - 6000 rpm Feed rate X-, Y- and Z-axis: 0.01 - 12000 mm/min Rapid traverse X-, Y- and Z-axis: 24 m/min Feed force X and Y: 5000 N Feed force Z: 8800 N Feed force: 5 kg Max. permissible tool weight: 5 kg Total permissible tool weight in the magazine: approx. 50 kg Max. Tool diameter with adjacent tool diameter 4 ...

Description: Fabrication number: S4C141101 Operating voltage: 3 x 400 V Frequency: 50/60 Hz Rated current: 45 A Control system: SIEMENS SINUMERIK 840 D Rotation diameter over bed: 430 mm Rotation diameter over cross slide: 300 mm Max. turning diameter: 300 mm Max. part length: 480 mm Max. bar passage: 45 mm Center width (spindle nose to tailstock center point): 670 mm Distance main spindle to counter spindle: 720 mm Travel distance X: 160 mm Z travel: 510 mm Main spindle: Outer spindle diameter in the front bearing: 80 mm Main spindle clamping system: Wood clamping cylinder with tow bar with max. passage 45 mm Max. Chuck size: 160 mm diameter Speed range: 0 - 6300 rpm (infinitely variable) Counter spindle (spindle 2): Spindle connection: KK 4 Outer spindle diameter in the front bearing: 70 mm Travel distance Z2: 510 mm Travel speed: 30 m/min Holding force: 6000 N Counter spindle clamping ...

Description: Fabrication number: S4C132091 Operating voltage: 3 x 400 V Frequency: 50/60 Hz Rated current: 45 A Control system: SIEMENS SINUMERIK 840 D Rotation diameter over bed: 430 mm Rotation diameter over cross slide: 300 mm Max. turning diameter: 300 mm Max. Part length: 480 mm Max. Bar passage: 45 mm Center width (spindle nose to tailstock center point): 670 mm Distance main spindle to counter spindle: 720 mm Travel distance X: 160 mm Z travel: 510 mm Main spindle: Outer spindle diameter in the front bearing: 80 mm Main spindle clamping system: Wood clamping cylinder with tow bar with max. passage 45 mm Max. Chuck size: 160 mm diameter Speed range: 0 - 6300 rpm (infinitely variable) Counter spindle (spindle 2): Spindle connection: KK 4 Outer spindle diameter in the front bearing: 70 mm Travel distance Z2: 510 mm Travel speed: 30 m/min Holding force: 6000 N Counter spindle clamping ...

Description: Fabrication number: S4AC0301 Operating voltage: 3 x 400 V Frequency: 50/60 Hz Rated current: 45 A Control system: SIEMENS SINUMERIK 840 D Rotation diameter over bed: 430 mm Rotation diameter over cross slide: 300 mm Max. turning diameter: 300 mm Max. part length: 480 mm Max. bar passage: 45 mm Center width (spindle nose to tailstock center point): 670 mm Distance main spindle to counter spindle: 720 mm Travel distance X: 160 mm Z travel: 510 mm Main spindle: Outer spindle diameter in the front bearing: 80 mm Main spindle clamping system: Wood clamping cylinder with tow bar with max. passage 45 mm Max. chuck size: 160 mm diameter Speed range: 0 - 6300 rpm (infinitely variable) Counter spindle (spindle 2): Spindle connection: KK 4 Outer spindle diameter in the front bearing: 70 mm Travel distance Z2: 510 mm Travel speed: 30 m/min Holding force: 6000 N Counter spindle clamping  ...

Description: EMCO Hyperturn 110 - SM2 - 1700 , Serial number and Control Serial number: H1114020734 Control system: SIEMENS Sinumeric 840D sl Working area Rotation diameter over bed: 720 mm Max. turning diameter: 710 mm Distance between the spindle noses: 1700 mm Traverse paths Traverse path X1 axis: 340 mm Traverse path X2 axis: 300 mm Traverse path Z1 axis: 1340 mm Traverse path Z2 axis: 1340 mm Traverse path counter spindle: 1360 mm Main spindle with C-axis , (Counter spindle specifications are identical) Angular resolution: 0.001° Spindle nose (DIN 55026): A2-11 Bore in the drawtube with clamping cylinder in mm: 110 x 1000 deep Bore in the spindle: 125 mm Bearing inside diameter in front bearing: 190 mm Bearing inside diameter in rear bearing: 170 mm Workpiece weight in the chuck max.: 500 kg Two tool turrets (specification per turret) Too ...

This EMCO HYPERTURN 65-1300 DUOTURN CNC Turn-Mill Center was built in the year 2018 in Austria. It is equipped with a SIEMENS Sinumerik 840D SL Control and 2 turrets including milling drive and 2 Y-axes. This highly productive CNC turning/milling center is perfect for the complete machining of turned and milled parts with 1300 m spindle distance. It has integrated spindle motors (ISM) on the main and counter spindles with a spindle speed range from 0 - 5000 min-1. This complete center features 2x 12-fold tool turret radial with directional logic for up to 2x 12 driven tool stations (swivel speed adjustable with feed switch). It comes with several extras from MT65/HT65 BigBore77 to BMT turret (top right) with direct drive for HT65DT/HT65TT/MT65 (the VDI30 standard turret is replaced by a BMT turret with BMT55P precision interface). See original PDF (German) with all positions attached. Ch ...

This EMCO HYPERTURN 65 PM CNC turning milling center was manufactured in the year 2019 and has 13650 production hours. It is equipped with a SIEMENS control unit. The machine has a spindle speed of 12000 rpm.

This Emco Concept TURN 450 Vertical Machining center was manufactured in the year 2013 and has 26337 production hours. It is equipped with an EMCO SIEMENS SINUMERIK OPERATE control unit. The machine has a spindle speed of 6300 rpm.

This EMCO E900 Vertical Machine Center was manufactured in the year 2015 and has 39500 production hours. It is equipped with a HEIDENHAIN control unit. The machine has a spindle speed of 10000 rpm.

This Emco VMC 300 Vertical Machining center was manufactured in the year 2003 in Austria. It is equipped with a SIEMENS SINUMERIK control unit.

This Emco Emcomill E 1200 Vertical Machining Center was made in 2014 in Germany and has 14677 production hours, of which 3402 are spindle hours. It is equipped with a Siemens Sinumerik 828 D control unit and has 4 axis. The machine has a spindle speed of 12000 rpm, is in very good condition, and is well maintained.

This EMCO EMCOMAT FB-450 Universal Machining center was manufactured in the year 2012 in Austria and has 1262 production hours. It is equipped with a EMCO CYCLE control unit and has 3 axis. The machine has a spindle speed of 20-5000 rpm.

This EMCO LABOR E260 Lathe was built in the year 2001 in Italy. It is equipped with a CNC FAGOR control unit. The machine has a bar passage of 78 mm.

This Emco Hyperturn 45 Lathe was manufactured in the year 2016 in Austria and has 27054 production hours. It is equipped with a SIEMENS control unit.

Table length: 500 mm Table width: 320 mm Longitudinal X: 700 mm Cross Y: 500 mm Vertical Z: 500 mm CNC Brand: Heidenhain CNC Model: HeidenHain TNC 124 SK 40 tools included Collet device included Equipped with handwheels X-Axis:         700mm Y-Axis:         500mm Z-Axis:         500mm Table Length:   500mm Table Width:    320mm Table load:     600 Spindle speeds: 3150Rpm Feed rate X-Axis:3000mm/min. Feed rate Y-Axis:3000mm/min. Feed rate Z-Axis:1500mm/min. Stroke pinole:  100mm Length:         2150mm Width:          1900mm Height:         2320mm Weight:         2550kg