used ERFURT for sale

Inv. Num. : 5831 Type: PKnT 160 Producer: ERFURT Created: 1987 Parameters: Compressive force: 160 t Maximum stroke rate top table: 15 1/min Total power requirement: 21 kW Ram stroke: 265-425 mm Adjusting the plunger: 130 mm

ERFURT PKZZ 315 double column press manufactured in 1984 in Germany is used for, among others, cutting, machining, bending and punching sheet metal and strip metal. Features such as the ability of extensive workpiece machining, a large work table and a 315-tonne operating slider make the crank press ideal for mass production of things such as washing machine parts, agricultural machinery or other types of vehicles. The ERFURT mechanical press is also distinguished by its high-quality welded steel construction, ensuring excellent stability during the production process. The machine uses a slider with a beam ejector, which is adjustable within a range of 400 mm via a motor reduction gear with overload protection. In order to increase the life of the tools and the quality of the parts produced, the 2500 mm long and 1400 mm wide work table has been equipped with hydropneumatic cushions.  ...

Press type: PME 315 T Drive system: Eccentric Type of used tools Progressive Nominal force: 3150 kN Rating above BDC mm Material flow L->R - Maximum SPM: 75 1/min Minimum SPM: 20 1/min Maximum shut height: 525 mm Minimal shut heigh:t 325 mm Slide adjustment: 130 mm Maximum slide stroke: 210 mm Minimum slide stroke: 40 mm Bolster specification Bolster dimension: 2220 x 1225 mm T-slots in bolster: T28 H8 DIN650 - Draw cushion N/A - Draw cushion stroke: N/A mm Draw cushion force: N/A kN Draw cushon dimension: N/A mm Maximum weight: kg Ram specification Ram dimension: 2220 x 1225 mm T-slots in ram: T28 H8 DIN650 - Max. upper die weight: 3600 kg Tool manipulation Tool is manipulated by forklift - Max. tool weight: 5500 kg Forks size/pitch: 150x60/940 mm Lower die clamp height: 50 mm Upper die clamp height: 50 mm Tool locating (centering) stůl/bolster  ...

Erfurt Press, Mechanic Press, H – 3m, 500 T, table 2800 x 2000mm ( it is extented for 10 cm each side – table and slide)

Very good machine, offer with feeded Table dimension: 4600 x 2200 Between columnsL 5022

Manufacturer: ERFURT - Niemcy 2 PIECES AVAILABLE Model: PKZV I 1250 Condition: Very good, complete, under power Technical details Table: 4000 x 1800mm Press weight: 230T Force: 1250T Slide stroke: 630mm Centres of pressure: 2 Adjustability of slide: 630mm Max delight between bolster and slide: 1165mm Width beteen columns: 4000mm Slide area: 3950 x 1800mm Bed area: 4000 x 1800mm Opening in bed: 3750 x 1300mm Main motor power: 132kW Idle stroke rate: 11 per minute Counter pressure of cushion in bed: 250T Stroke of cushion plate: 250mm

Press Erfurt Model: PKZZ-III-250-1FS YOM: 1980 Press capacity: 250 ton Table size: 2500 x 1250 mm – slidding table Slide size: 2500 x 1250 mm Slide stroke: 400 mm Max. height of the tool. Position slider SDAU: 954 mm Min. height of the tool. Position slider SDAD: 715 mm Slide adjustment: 250 mm SPM 25 Cushion drawing: operates

Capacity 100 ton Table 880x715 mm Max. sheet thickness 3 mm Stroke per min. 360 Stroke 25 mm Ram adjustment 70 mm Distance Ram-table 400 mm 15 kW Dimensions LxWxH 3300x1600x2600 mm Total weight 10 tons

PKZZ 250 Double Column Crank stamping Press Completely overhauled. Electric and Control- Not available. Table 2500 x 1400 mm Ram 2320 x 1250 mm Distance between uprights 2525 mm Window in table width 2300 mm Window in table depth 850 mm Stroke 400 mm Strokes per minute SPM 12 Adjustment of ram 120 mm Shutheight 550 mm Table cushion force 50 to Cushion stroke 160 mm Motor 32 kW Weight ca. 39 tons

Capacity: 800 tons Stroke of slider: 400 mm Distance between table and slider 850 mm Number of strokes per minute 12 Adjustment of slider: 185 mm Table area: 1250 x 1650 mm Slider dimensions 1000 x 1250 mm Main motor power: 55 kW Distance between columns 1250 mm Press dimensions, mm 3800 x 2800 x 6900 Weight: 57 tons

Capacity, ton 1250 Stroke, mm 500 Min number of no-load stroke: 8 /per min Slider adjustment, mm 215 Max. shut height between bolster plate and slider (stroke down, adjustment up), mm 1100 Table size, mm 1600 x 1850 Slider size, mm 1300 x 1400 Table gap size, mm 1100 x 1100 Distance between columns, mm 1630 Distance between slides, mm 1580 Cushion travel, mm 200 Cushion capacity, ton 200 main motor power, kW 90 Press weight, kg 110000

Capacity, ton 1250 Stroke, mm 500 Maximum drawing depth,mm 200 Min number of no-load stroke: 14 /per min Slider adjustment, mm 315 Max. shut height between bolster plate and slider (stroke down, adjustment up), mm 1250 Table size, mm 1600 x 1800 Slider size, mm 1530 x 1800 Aperture in a table, mm 1100 x 1100 Distance between columns, mm 1600 Cushion travel, mm 200 Cushion capacity, ton 200 Maximum push force ton 31.5 main motor power, kW 125 Press overall dimensions: 5850x3100x8950 mm Press weight, kg 195000

Max. slider force at the distance of 12,5 mm in the lower dead point: 1250 ton Slider force at the distance of 250 mm in the lower dead point: 350 ton Number of single strokes per minute: 11 Slider stroke: 630 mm Slider adjustment: 630 mm The closed height: 1165 mm Table pillow: -Max. stroke: 250 mm -Stroke adjustment: 250 mm -Max. holding force: 250 ton -Max. ejection force: 40 ton Table dimensions: 4000x1800 mm Bolster dimensions: 3950x1800 mm Table gap: 3750x1300 mm Main motor power: 132 kW Stay spacing: 4000 mm Press weight: 215000 kg

Hydraulic safety lock from an overload: 125-250 tons Number of idle slide strokes per minute: -For the head press: 20 -For the subsequent press: 25 Number of microdrive strokes per minute: 0,45 Electric motor for the press table: 45 kW Electric motor for the microdrive: 17 kW Max. balancing weight of the upper part of die on the slide: 3,5 tons Distance between columns: 2550 mm Slide stroke: 400 mm Max. extract depth: 160 mm Slide adjustment: 250 mm Adjustment range of the extract depth: 0-160 mm Max. closed height: 800 mm Height of the pull-out table: 500 mm Table dimensions: 2500x1250 mm Table bore dimensions: 2100x850 mm Slide dimensions: 2500x250 mm Weight: 74500 kg

effort 250 ton stroke 315 mm slide adjustment 160 mm distance slide- table 800 mm die height 555 slide 620x950 mm table 800x1180 mm 28 kW Total weight 25t

Capacity 500 tons Speed 20 spm Bed area 2800 x 1800mm Ram area 2800 x 1700mm Stroke 500mm Die height 1100mm SDAU weight 130 tons

Capacity, ton 1250 Stroke, mm 500 Min number of no-load stroke: 8 /per min Slider adjustment, mm 215 Max. shut height between bolster plate and slider (stroke down, adjustment up), mm 860 Table size, mm 1600 x 1850 Slider size, mm 1300 x 1400 Table gap size, mm 1100 x 1100 Distance between columns, mm 1630 Distance between slides, mm 1580 Cushion travel, mm 200 Cushion capacity, ton 200 main motor power, kW 90 Press weight, kg 130000

moving bolster Capacity, ton 500 Centers of pressure 2 Idle stroke rate 20 Distance between the uprights, mm 2800 Shut height, mm 1100 Table dimensions, mm 2800 x 1800 Table gap, mm 2400 x 1250 Ram dimensions, mm 2800 x 1700 Ram stroke, mm 500 Ram adjustment, mm 500 Die cushion adjustment, mm 200 Die cushion stroke, mm 200 Die cushion capacity, ton 100 Main motor power, kW 75 Press weight, kg 120000

Effort 500t Slide stroke 500mm Number of strokes per minute 20 Slider dimensions 3840 x 2290 x 2360mm Slider weight 17 300kg Adjustment of the distance between the slider and the table 500mm Max. open press height 1300mm Max. open die height 1280mm Min. Closed height of press 800mm Min. closed die height 820mm Height of sliding table 500mm The maximum force of 3 pillows of pressing 100t Cushion plate stroke 200mm Main motor power 75 kW Number of sliding tables (sideways movement) 1 Number of additional drawers 1 Press weight 136,700kg

course of the blade slide 100 mm number of moves at idle position 25 / min Main drive motor 30 kw in 1480 rev / min cutting power Strength of the material Tensile N/mm2 450 500 600 700 800N/mm2 square mm 125 118 105 95 85 round mm 132 125 112 100 90 flat 375x 60 45 40 35 32 Weight 23,000 kg (50,692 lb) Length x width x height 1850 mm × 2450 mm × 3750 mm

Max shearing power: 500 ton Max speed: 40/1 min Stroke: 100 mm Single stroke: 25/1 min Square: 125 mm Max round: 132 mm Length of blades: 420 mm Main motor power: 45 kW Height above floor: 3500 mm Weight: 23 ton

Capacity: 800 tons Stroke of slider: 500 mm Number of strokes per minute 12 Adjustment of slider: 185 mm Table area: 1250 x 1650 mm Slider dimensions 1000 x 1250 mm Main motor power: 55 kW Distance between columns 1250 mm Press dimensions, mm 3800 x 2800 x 6900 Weight: 57 tons

Max shearing power: 315 ton Stroke: 70 mm Single stroke: 30/1 min Square: 100 mm Max billet cut : 106 mm Main motor power: 20 kW Weight: 14 ton

cutting effort 1000t the number of strokes (no load) 17 /min course a support of the blades 140mm Max. cutting diameter of rounded workpiece, mm 190 Max. cutting diameter of squared workpiece, mm 180 for 450 N/mm2. Machine weight, kg 60000

cutting effort 800t the number of strokes (no load) 20 /min single strokes 16 /min course a support of the blades 125mm Main drive motor 55 kw in 1475 rev / min cutting power Strength of the material Tensile N/mm2 450 500 600 700 800 900 N/mm2 square mm 160 150 132 118 106 100 round mm 170 160 140 125 112 106 strip steel 425x 67 60 53 47 42 38 320 x 80

BRAND: ZDAS YEAR: 1962 MODEL: PKZZ 1000/4000 APPLICATION TYPE: STAMPING LOCATION: CZECH REPUBLIC MACHINE TYPE: STAMPING MACHINE AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MACHINE WEIGHT: 165440 KG MAIN DRIVE SPINDLE MOTOR POWER: 75 KW STAMPING FORCE: 10000 KN DISTANCE BETWEEN BARS: 4000 MM STROKE: 500 MM TABLE OUTER LENGTH: 4000 MM OUTER WIDTH: 2100 MM Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - RAM SIZE: 3770 X 1800 MM - RAM ADJUSTMENT: 180 MM QUALITATIVE MACHINE BENEFITS: - RETROFITTED IN 1999

pressure: t throat: mm stroke: mm total power requirement: 23 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 400 t throat: 400 mm stroke: 40 - 140 mm number of strokes - idle run: 32 min-1 ram adjustment: 125 mm table surface area: 1250 x 750 mm dayligth: min/max 450/590 mm total power requirement: 31,5 kW weight of the machine ca.: 23 t Overall size: 3,7 x 1,7 x 3,9 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CONTROLS   PLC SIEMENS S5 PRESS DESIGN   drive system: eccentric / crank   frame design: H-frame, monoblock   openings in uprights: yes   number of suspensions: 2   number of slide actions: 1   table cushion: yes   quick die change system: yes   feedstock transport direction: left to right PRESS FORCES   total force (nominal): 400 to   nominal work capacity: 32 kNm PRESS TABLE   table surface (left-right): 2600 mm   table surface (front-back): 990 mm   thickness of bolster plate: 200 mm   height above floor level: 800 mm   opening in bed (left-right): 2250 mm   opening in bed (front-back): 280 mm SLIDE   slide force: 400 to   table surface (left-right): 2600 mm   table surface (front-bac ...

pressure:250 t throat:450 mm stroke:36 - 126 mm no. of strokes:40 /min distance table/ram, max. stroke up, adjustment up:525 mm table surface area:1000 x 750 mm hole in the table:400 x 360 mm table height over floor:1000 mm ram surface:600 x 500 mm ram adjustment:111 mm power requirement:19,0 kW weight:13,5 t Dimensions (WxDxH):1,3 x 3,2 x 3,35 m clutch:pneumatic overload protection in ram:mechanical ram adjustment:motoric

Description: SPECIFICATIONS Feature: Erfurt Type: PR160/315 Capacity: 160 T Table length: 800 mm Table width: 550 mm Air coupling: Yes 2-Hand protection: Yes Unloading: 300 mm Number of slugs: 50 p/min Electrically adjustable slug: 100 mm weight approx.: 14,000 kg, Approx. Onsite Dimension. (l x w x h): 2,000 x 3,200 x 3,100 mm