used ERNST for sale

ERNST EG3M deburring machine was built in 1988 in Germany. The surface machining of workpieces with a maximum thickness of 70 mm is performed dry” by means of a burr-removing sanding roller installed in the machine and two brush rollers moving in the opposite direction intended for edge rounding. To prevent the workpiece from being drawn into the centre of the ERNST EG 3 M deburring machine, the sheet to be deburred is pressed onto the conveyor belt via a driven roller on slack bearings. The ERNST EG 3/M 1400 automatic deburring machine also allows the use of a magnetic belt to process smaller workpieces. The total weight of the deburring machine is 3500 kg. Technical data of the ERNST EG3M deburring machine - maximum workpiece thickness: 70 mm - minimum workpiece thickness: 1 mm - minimum workpiece length: 350 mm - minimum workpiece length on magnetic band: 80 mm - minimum wor ...

Sheet metal deburring machine Manufacturer: ERNST Type: EM5/N900 Year of construction: 1999 Control type: conventional Working width: 880 mm Workpiece height: 1-70 mm Grinding drum diameter: 420 mm Machine weight approx.: 2,800 kg Dimensions approx.: 2,500 x 1,715 x1,675 mm automatic sheet metal deburring machine working in wet grinding process automatic magnetic filter system Wet sanding device Washing and drying facilities Maglev width: 200 mm Minimum length of small parts: 80 mm

BRAND: ERNST YEAR: 2012 MODEL: NEPTUN E/B PRODUCTION HOURS: 12000 APPLICATION TYPE: DEBURRING LOCATION: LATVIA MACHINE TYPE: DEBURRING AVAILABILITY: IMMEDIATELY Technical Information CONTROL UNIT BRAND: ERNST WORKPIECE WORKPIECE Y: 1500 MM WORKPIECE Z: 0.8-100 MM WORKPIECE WEIGHT: 100 KG

working width: 1380 mm workpiece height: 70 mm : total power requirement: 45 kW weight of the machine ca.: 5.500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

work piece width: 1500 mm plate thickness: 0,8 - 100 mm Brush width: 490 mm Brush diameter: 200 mm immersion travel: ca. 1.5 - 2.0 mm grinding speed: 200 - 1200 U/min band speed: 0,8 - 4.0 m/min work height max.: 950 mm Required air-pressure: 5.0 bar Air consumption: 80.0 l/min. number of brushing / polishing units: 8 Stück Control: NC Touch voltage: 400 V total power requirement: ca. 40.0 kW weight of the machine ca.: 6.100 kg. dimensions of the machine ca.: 3700 x 2750 x 2080 mm Well maintained condition with lots of accessories New price including accessories approx. 180.000 euros Special price on request Furnishing : - ERNST dry wide belt sanding machine TYP ATLAS ER ROTOR” Area of application: - Slag removal / deburring / edge rounding / finish grinding etc. - ERNST NC control including touch screen Control of the entire system graphically supported color terminal Adjustme ...

This ERNST EM5N II/L Deburring machine was manufactured in the year 2007.

working width:1400 mm Workpiece thickness max.: 80 mm work height max.:1000 mm Feed speed:4m/min I Stufe, 8 II Stuf m/min. Required air-pressure:max. 5 bar voltage:50 Hz, 380 V workpiece length:320 mm workpiece thickness min.:1 mm weight of the machine ca.:3500 kg Documents:vorhanden

working width:880 mm workpiece height:1- 70 mm work height max.:1000 mm Feed speed:4- 8 m/min. voltage:50 Hz, 400 V weight of the machine ca.:2.800 kg dimensions of the machine ca.:2500 x 1715 x1675 mm width:min. 350 mm Sanding cylinder diameter:420 mm electr. connected load:20 KW Required air-pressure:1 x R3/ 8 " pressure:5 bar tank:des Bandfilter ca.200 l automatic magnetic filter unit:vorhanden grinding tools:1540 x 900 mm accessories::9 Bänder Documents:vorhanden

Manufacturer: Ernst Funierschleifautomat, Type: 840-2, Year: 2003, Monting of the machine: Quer/lang/lang/lang/Bürste, Sanding width mm: 1305, Sanding hight mm: 3-120, Number of sanding belts: 4, Sanding belt dimensions: 2620 X 1350/5400 X 150, Table hight adjustment by engine: yes, Rollers: no, Band 1Querschleifaggregat: yes, Band 1 Leistung kW : 18,5, Band 2 Schuhaggregat: Simplex Schuh, Band 2 Kombiaggregat Walze/Schuh: no, Band 2 Leistung kW : 30, Band 3 Kombiaggregat Walze/Schuh: Simplex Schuh, Band 3 Leistung kW : 30, Band 4 Kombiaggregat Walze/Schuh: Duplex Schuh, Band 4 Leistung kW : 37, Elektronische Tastung mm: yes, Table hight adjustment by engine: yes, Continous adjustable feeding speed m/min: 13,5-60, Feeding engine kw: ca.4, Constant table hight: 880, Vacuum table: yes, Segment sanding shoe: yes, wast cleaning: yes, Ionising: yes, Weight in kg: 10200, Year :2003

Manufacturer: Ernst, Type: Vakuumventilator, Year: 1993, Diameter intake mm: ca 120 mm, Engine power kW: 2,5, Flow rate approx. m3/h: 1500, V-belt drive motor: yes, Outlet side mm: ca.100, Year :1993

Manufacturer: Ernst, Type: 830-2, Monting of the machine: längs / längs / längs, Sanding width mm: 1.350, Sanding hight mm: 3 - 120, Number of sanding belts: 3, Sanding belt dimensions: 1.400 x 3.150, Band 1 Leistung kW : 11, Belt 1 shoe unit: yes, Band 1 Schleifbandgeschwindigkeit m/s : 2 - 10, Belt 2 shoe unit: yes, Band 2 Leistung kW : 11, Band 2 Schleifbandgeschwindigkeit m/s : 2 - 10, Band 3 Leistung kW : 18, Band 3 Schleifbandgeschwindigkeit m/s : 1 - 7, Frequency control of belts: 3, Continous adjustable feeding speed m/min: 8 - 30, Vacuum table: yes, Brushing unit: 3 kW, Diameter/ brush bristles: 200,

Manufacturer: Ernst , Type: AB 1 1300, Year: 1982, Control: no, Compressed air cleaning: yes, Number of units: 2, Units mounted upright: yes, Roll transport: yes, Feeding speed continous adjustable: gekoppelt an Schleifmaschine, rotor jets: Kanal, FREE TEXT: Arbeitsbreite 1400/Arbeitshöhe 80/inkl.Turbine, Year :1982

Manufacturer: Ernst, Type: 830 J-2, Monting of the machine: quer / längs / längs, Sanding width mm: 1380, Sanding hight mm: 3 - 120, Number of sanding belts: 3, Sanding belt dimensions: 5.400 x 150 + 3.150 x 1.400, Transverse sanding units: 1, Längsschleifaggregate: 2, Band 1 Leistung kW : 15, Band 2 Leistung kW : 30, Band 3 Leistung kW : 37, Continous adjustable feeding speed m/min: 12 - 36, Intermediate sanding of lacquer: no, Constant table hight: ca 880, Vacuum table: 7,5, Brushing unit: 1,1, Weight in kg: 7.400,

Description: Includes accessories such as replacement tips, dial gauge holder and more. (see pictures) Approx. Onsite Dimension. (l x w x h): 400 x 350 x 100 mm, weight approx.: 10 kg

Deburring machine Ernst Neptun Deburring machine was little used