used esab flame cutting units

Inv. Num. : 6803 Type: SUPRAREX SXE P-1 400 Producer: ESAB Created: 2007 Parameters: Table height: 700 mm Cutting speed: 24000 mm/min Sheet thickness: 300 mm Cutting length: 2x6000 mm Cutting width: 3000 mm Machine height: 2190 mm Machine length: 2025 mm Machine width: 4654 mm Machine weight: 2000 kg

CNC flame cutting machine make ESAB type Numorex NXB 6500Machine -No: 89022, built in 1989Track width: 6500 mmTrack length: 12000 mmCutting table height: 700 mmNumber of burners: 6 oxy-fuelType of control: CNC 510With- Extraction systemused, from large company, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

; Available from 37 KW 2016

Machine type: ESAB SXE-P-5000 NC/-CNC type: CNC version 52 Year of construction: 1995/Refurbishment and conversion 2009 track width: 5,000 mm track length: 34 000 mm cutting range: width 4 000 mm Laenge 18,000 mm runway height 700 mm table height 700 mm Head: 2 head 1: Cutting head head 2: marking unit water basin: 3 sinks sinkable to cut underwater. Power sources: 2 connected in parallel 400 A cutting is possible in the VA range up to 100 mm cutting cutter, soft fillers up to max. 50 mm. The plant is in operation. Complete data about the retrofit on request ; ready for immediate use

; ready to use

; ready for immediate use

CNC plasma cutting system Esab Pegasus Working area: 4x2m Esab Precision Plasma 100A, with PT24 burner automatic gas mixing console (+1 complete, new gas mixing console as replacement), complete documentation; in good condition, without suction many new and original slip parts (Duesen; electrodes), as well as other spare parts. assembly and commissioning on request; ready for immediate use

Plasma cutting machine ESAB working area 1500 x 3000 1 x autogen up to 200 mm 1 x Plasma Hifocus 160 i with automatic gas console. see PDF document several plasma change torches available Very well maintained from: 10 / 2012; ready for use

Burner types: PT - 600 and PT - 15 XLS plasma power source: ESP 200; 100-160 volts; 40-200 A cutting method underwater Plasma cutting cutting table L:6,7xB:1,63xH0,79m Trafo ESAB ESP200 L:1,05xB:0,55xH:1.1m/330kg Portal; Rails x-way 7500 mm y-path 2700 mm Welding speed 2-750 IPM m/min Control CNC Vision 1000 cutting width y=max. 2438 mm thickness unleg. Steel=50.8 mm thickness of alloyed steel=38 mm thickness Alu=32mmmm burner cod1 piece Adjustment burner=approx. 150mmmm Total power requirement 39.8 kVA machine weight approx. 4.0; ready for immediate use

; ready for immediate use

CNC Portal Cutting Machine Manufacturer: ESAB Type: SXE P1 3500 LH Year construction: 2001 CNC control: Vision 51 Working area: 2x6 m Track: 8 m 2 x car use burner under power to visiton request dismantling and commissioning on request; available from 37 KW 2016

Esab CXD 3000 P Working range: 14000 x 2500 mm 2006 completely overhauled , new control system, new plasma system installed. 1x Plasma Plasmaarc 200 Cutting up to 40mm Burning table 2 x 6m inclusive Without burning tables , without filter system assembly and commissioning on request; ready for use

CNC Portal Plasma Cutting Machine Manufacturer: ESAB Eagle 2500 Year of construction: 2004 Control: Vision DNC Connection track width: 2,500 mm runway: 5 m Working area: 2 x 3 m Extraction table 1 plasma torch with power source Kjellberg HiFocus 160i automatic gas console (see PDF) cutting tools: up to 25 mm filter cutting system: Columbus Immediately available ; ready for immediate use

Esab UXD - P 2500 Control NCE 290 1 x Plasma: Kjellberg PA S 40 cut up to 30mm 1 x Autogen Support Working area: 2500mm x 3500mm Including suction machine has two-sided drive and is very well maintained. commissioning on request ; ready for immediate use

Esab Combirex DX 3000 Working range: 2500mm x 4000mm 1x Plasma Support CNC Portal Plasma Cutting Machine Manufacturer: ESAB Type: Combirex DX 3000 Built: 2015 Control: Vision T5 Track width: 3,000 mm frame: 6000mm Working range: 2500mm x 4000 m suction table 1 plasma torch with power source m3 202 torch PT 36 Cutting rods: Punching: 38 mm Cutting: 45 mm laser pointer filter system ex protected cutting software: Columbus Very low operating hours commissioning on request

CNC Portal plasma cutting machine Manufacturer: ESAB Eagle 2500 Year of construction: 2004 Governance: Vision DNC connection Track width: 2,500 mm Career length: 5 m Work area: 2 x 3 m Vacuum table 1 plasma torch Kjellberg HiFocus 160i power source automatic gas Console (see PDF) Cutting thickness: up to 25 mm quality section Filter system Cutting software: Columbus Now available

ESAB CXD 3000 P Work area: 14000 x 2500 mm 2006 completely overhauled, new controls, new plasma system installed. 1 x plasma Plasmaarc 200 Cutting up to 40mm 2 x 6 m including burning table Without firing tables, without filter system Installation and commissioning on request

CNC Portal Laser Cutting Machine Manufacturer: ESAB Type: Alpharex AXC 7000 Built: 1998 CNC control: NCE620 Working range: 5,000 mm x 27,000 mm Laser type: TLF 4000 t Suction table: Beuting without suction

CNC Portal Cutting Machine Manufacturer: ESAB Type: Suprarex SXE-P1 4000 Built: 2009 CNC Control: Vision55 2 autogenous burners 1 plasma burner with power source Kjellberg HiFocus 160i Track width: 4,000 mm Working width: 2,500 mm Track length 18 m (shortenable) without table without filter

Flame cutting machine, torch, oxy-fuel cutting machine -Shaft diameter: 30 mm -Shaft length: 220 mm (260 mm with sleeve) -Total length: 405 mm -for: 16 mm nozzle diameter -Weight: 1.3 kg

The machine is available for immediate delivery. The suction table is not included.

ESAB SXE-PI 3500 LH PT-24 plasma / oxy-fuel cutting system N.3 TORCHES AND N.1 PLASMA TORCH CUT FROM mm 1 TO mm 200 MAX SHEET 2500x3000

This ESAB SXE-P14500 SUPRAREX Plasma Cutting Machine was made in 2008. It is equipped with an ESAB Vision 52 control unit.

This ESAB SXE-P14500 SUPRAREX Plasma Cutting Machine was made in 2008. It is equipped with an ESAB Vision 52 control unit.

This ESAB SXE-P14500 SUPRAREX Plasma Cutting Machine was made in 2008. It is equipped with an ESAB Vision 52 control unit.