- 4 R HMS 1550 x 150(1)
- BT 114 S(1)
- DK 1900-200(1)
- DPM 1040-60(1)
- DPM 1040-80(1)
- DPM 1040/60(1)
- DPM 1070-100(1)
- DPM 1070-150(1)
- DPM 1070/150(1)
- DPM 775/30(2)
- DPM-K 1070-100(1)
- DPM-K 1070-150(1)
- PN 60 - 2(1)
- R 1(1)
- R 1050 x 68(1)
- R 1270 x 75(1)
- R1 150x2280(1)
- RB 2000x600 - Zufuhr(1)
- RB 3000x600 - Zufuhr(1)
- RM 1270 x 90 motor.(1)
- RS 1550 x 90(1)
- SLB 15 to. / 1350 mm(1)
- SLB 2 to. / 500 mm(1)
- SLB 2 to. / 800 mm(1)
- SLB 5 to. / 500 mm(1)
- SLB 5 to. / 800 mm(1)
- Spaehnemulde 600(2)
- Spähnemulde 600(2)
new
length: 1900 mm width: 810 mm height: 860 mm internal dimension: 1,5 x 0,74 x 0,78 Contents: 600 l The containers are chip bins ! - powder-coated in RAL 6011 green. - tilting device - Drainage device - Anti-tip device and forklift pockets. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
length: 1900 mm width: 810 mm height: 860 mm internal dimension: 1,5 x 0,74 x 0,78 Contents: 600 l The containers are chip bins ! - powder-coated in RAL 6011 green. - tilting device - Drainage device - Anti-tip device and forklift pockets. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
width of the strips: 150 mm band length: 2280 mm band speed: 22 m/sec table-size: 700 x 350 mm roll diameter: 140 / 80 mm motor speeds:: 2880 1/min range L-W-H: 1300 x 800 x 1500 mm total power requirement: 3,0 kW weight of the machine ca.: 250 kg Horizontal belt grinder - Small, flexible all-rounder - Solid gray cast iron unit - long-lasting, good grinding results - Motorized tape oscillation approx. 10mm - Pneumatic belt tension - Small table on the pulley for grinding radii and shapes - The entire sanding belt can be used thanks to the height-adjustable work table - Including angle and miter fence Special equipment: - swiveling grinding unit 90 - 135 degrees - Support table on the pulley The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 60 t stroke: 250 mm table surface area: 1040 x 370 mm working width: 1040 mm pressing speed: 4,0 mm/sec feed speeds: 8,0 mm/sec return speed: 10,0 mm/sec total power requirement: 4,0 kW weight of the machine ca.: 0,8 t dimensions of the machine ca.: 1,7 x 0,7 x 2,1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 30 t stroke: 200 mm table surface area: 775 x 190 mm working width: 775 mm pressing speed: 5,0 mm/sec feed speeds: 7,5 mm/sec return speed: 10,0 mm/sec total power requirement: 3,0 kW weight of the machine ca.: 0,4 t dimensions of the machine ca.: 1,5 x 0,7 x 1,8 m - hydraulic workshop press - table height adjustment - V-block tool insert - pressure display manometer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 150 t stroke: 300 mm table surface area: 1070 x 290 mm working width: 1070 mm pressing speed: 5,0 mm/sec feed speeds: 9,0 mm/sec return speed: 10,0 mm/sec total power requirement: 11,0 kW weight of the machine ca.: 1,87 t dimensions of the machine ca.: 2,2 x 1,3 x 2,3 m - hydraulic workshop press with adjustable cylinder - Table height adjustment - V-block tool insert - Pressure gauge The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
sheet width: 1270 mm plate thickness: 2,5 mm roll length: 1270 mm roll diam. toproll: 90,0 mm engine output: 1,1 kW bending speed: 6,0 m/min weight: 520 kg Furnishing: - motor-driven asymmetrical 3-roll round bending machine - hardened rollers - manual folding warehouse for quick removal of the workpiece - Profile inlets i.d. Rollers - Double foot switch for R / L run and emergency stop button - Conical bending device - rear roller manually adjustable - electr. Safety device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
plate thickness: 2,0 mm tube diameter: 60,0 mm motor: 400 Volt The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
0: 2.000 kg height: 500 mm width: 1200 mm Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - CE marking techn. Details: - Height: 500 mm - Width: 1200 mm - Load capacity: 2 to - Height adjustable: no - Support surface: 1200 x 100 mm - Space requirement approx .: 1.2 x 0.8 x 0.8 m - Weight approx. 20 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 100 t stroke: 300 mm table surface area: 1070 x 260 mm column travel between the guideways: 1070 mm ajustment speed: 8,0 mm/sec working feed: 5,0 mm/sec return speed: 10,0 mm/sec engine output: 5,5 kW weight of the machine ca.: 1500 kg. dimensions of the machine ca.: 2050 x 1000 x 2200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
sheet width: 1050 mm plate thickness: 1,50 mm roll length: 1050 mm roll diam. toproll: 68,0 mm engine output: manuell kW weight: 280 kg range L-W-H: 1930 x 700 x 1160 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
length: 3.000 mm height: ca. 660 - 815 mm mm width: 600 mm Furnishing : - stable construction - high load-stable stability - Height-adjustable feet techn. Details: - Track length: 3,000 mm - Roll width: 600 mm - Height: approx. 660-815 mm - Distance between the rollers: approx. 160 mm - Height adjustable: yes - Number of rolls: 12 pieces - Roll diameter Ø 90 mm - color blue / red The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 80 t stroke: 250 mm table surface area: 1040 x 260 mm column travel between the guideways: 1040 mm ajustment speed: 8,0 mm/sec working feed: 5,0 mm/sec return speed: 10,0 mm/sec engine output: 5,5 kW weight of the machine ca.: 835 kg. dimensions of the machine ca.: 1810 x 700 x 2100 mm Furnishing: - Robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod including round steel chain and 2x locking bolts Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: 1x delivery speed 1x working speed 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the ...
new
pressure: 60 t stroke: 250 mm table surface area: 1040 x 370 (315) mm column travel between the guideways: 1040 mm ajustment speed: 8,0 mm/sec working feed: 4,0 mm/sec return speed: 10,0 mm/sec engine output: 4,0 kW weight of the machine ca.: 800 kg. dimensions of the machine ca.: 1.700 x 700 x 2.100 mm Furnishing: - Robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod including round steel chain and 2x locking bolts Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: 1x delivery speed 1x working speed 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounte ...
new
0: 2.000 kg height: 800 mm width: 1200 mm Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - CE marking techn. Details: - Height: 800 mm - Width: 1200 mm - Load capacity: 2 to - Height adjustable: no - Support surface: 1200 x 100 mm - Space requirement approx .: 1.2 x 0.8 x 0.8 m - Weight approx. 50 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
width of the strips: 50 mm band length: 940 mm band speed: 3 - 22 m/min turning speeds: 1450 U/min tube diameter: 16 - 114 mm radius: 180 ° total power requirement: 4,75 kW weight of the machine ca.: 265 kg. range L-W-H: 1.000x750x1.300 mm Furnishing: - stationary pipe belt grinders - Automatic material feed with separate drive motor - Replacement sanding belts - Stepless speed adjustment - Manual adjustment of tube tension - Polish bent pipes up to 180 (angle). - Manual work possible without feed - CE mark / declaration of conformity The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
0: 5.000 kg height: 800 mm width: 1200 mm Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - CE marking techn. Details: - Height: 800 mm - Width: 1200 mm - Load capacity: 5 to - Height adjustable: no - Support surface: 1200 x 100 mm - Space requirement approx .: 1.2 x 0.8 x 0.8 m - Weight approx. 60 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
0: 15.000 kg height: 790-1350 mm width: 1200 mm weight: ~ 65,0 kg Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - with height adjustment - CE marking techn. Details: - Height: 790 mm - Width: 1200 mm - Load capacity: 15 to - Height adjustment: 790 - 1350 mm - Support surface: 120 x 120mm - Space requirement approx .: 1350 x 720 x 1350 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 150 t stroke: 300 mm table surface area: 1070 x 290 mm column travel between the guideways: 1070 mm ajustment speed: 9,0 mm/sec working feed: 5,0 mm/sec return speed: 10,0 mm/sec engine output: 11,0 kW range L-W-H: 2200 x 1300 x 2300 mm weight of the machine ca.: 1870 kg. Furnishing: - hydraulic workshop press - Table height adjustment - V-block tool insert - Pressure gauge The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 150 t stroke: 300 mm table surface area: 1070 x 290 mm column travel between the guideways: 1070 mm ajustment speed: 9,0 mm/sec working feed: 5,0 mm/sec return speed: 10,0 mm/sec engine output: 11,0 kW range L-W-H: 2200 x 1200 x 2550 mm weight of the machine ca.: 2070 kg. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
sheet width: 1550 mm plate thickness: 2,0 mm roll length: 1550 mm roll diam. toproll: 90,0 mm engine output: manuell kW weight: 560 kg range L-W-H: 2580 x 700 x 1250 mm Furnishing: - manual asymmetrical 3-roll round bending machine with hand drive - manual folding warehouse - manual delivery d. rear roller - Profile grooves: 4/6/9 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
width of the strips: 150 mm band length: 2280 mm revolutions per minute: 2880 U/min roll diameter: 140 / 80 mm table-size: 700 x 350 mm engine output: 3,0 kW weight: 250 kg range L-W-H: 1300 x 800 x 1500 mm Furnishing : - Horizontal belt grinder - Small, flexible all-rounder - Solid gray cast iron unit - long-lasting, good grinding results - Motorized belt oscillation approx. 10 mm - Pneumatic belt tension - Small table on the pulley for grinding radii and shapes - The entire sanding belt can be used thanks to the height-adjustable work table - Including angle and miter fence Special equipment included: - swiveling grinding unit 90 - 135 degrees - Support table on the pulley The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
sheet width: 1270 mm plate thickness: 1,50 mm roll length: 1270 mm roll diam. toproll: 75,0 mm engine output: manuell kW weight: 330 kg range L-W-H: 2150 x 700 x 1160 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
length: 2.000 mm height: ca. 660 - 815 mm width: 600 mm Furnishing : - stable construction - high load-stable stability - Height-adjustable feet techn. Details: - Track length: 2,000 mm - Roll width: 600 mm - Height: approx. 660-815 mm - Distance between the rollers: approx. 160 mm - Height adjustable: yes - Number of rolls: 8 pieces - Roll diameter Ø 90 mm - color blue / red The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 100 t stroke: 300 mm table surface area: 1070 x 315 mm column travel between the guideways: 1070 mm ajustment speed: 8,0 mm/sec working feed: 5,0 mm/sec return speed: 10,0 mm/sec engine output: 5,5 kW weight of the machine ca.: 1.870 kg. dimensions of the machine ca.: 2.050 x 1.000 x 2.200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 30 t stroke: 200 mm table surface area: 775 x 190 mm column travel between the guideways: 775 mm ajustment speed: 7,5 mm/sec working feed: 5,0 mm/sec return speed: 10,0 mm/sec engine output: 3,0 kW weight of the machine ca.: 400 kg. dimensions of the machine ca.: 1.500 x 700 x 1.800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 200 t stroke: 300 mm table surface area: 1900 x 440 mm column travel between the guideways: 1900 mm working feed: 5,0 mm/sec engine output: 15,0 kW weight of the machine ca.: 4.800 kg. range L-W-H: 2.570 x 1.665 x 2.860 mm Furnishing: - hydraulic workshop press with adjustable cylinder - Table height adjustment - V-block tool insert - Pressure gauge The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
0: 5.000 kg height: 500 mm width: 1200 mm Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - CE marking techn. Details: - Height: 500 mm - Width: 1200 mm - Load capacity: 5 to - Height adjustable: no - Support surface: 1200 x 100 mm - Space requirement approx .: 1.2 x 0.8 x 0.8 m - Weight approx. 35 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
sheet width: 1550 mm plate thickness: 6,5 mm pre-bending: 4,5 mm diameter of upper rolls: 150 mm side roll diameter: 130 mm diameter of lower rolls: 150 mm distance: max. OW zu UW 20,0 mm total power requirement: 2,2 + 1,5 kW weight of the machine ca.: 2.370 kg. range L-W-H: 3.300 x 1.200 x 1.300 mm Furnishing: - hydraulic 4-roll bending machine - separate control panel - hardened rolls SAE 1050 CK 45 - Conical bending device - 3 digital displays for exact roller positions - hydraulic folding storage The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
470 € Description: The containers are chip bins ! - powder-coated in RAL 6011 green. - tilting device - Drainage device - Anti-tip device and forklift pockets. - without heavy-duty castors Length 1900 mm Width 810 mm Height 860 mm Internal dimensions (LxWxH) 1.5 x 0.74 x 0.78 Capacity 600 l weight approx.: 150 kg, Approx. Onsite Dimension. (l x w x h): 1,900 x 810 x 860 mm
used
470 € Description: The containers are chip bins ! - powder-coated in RAL 6011 green. - tilting device - Drainage device - Anti-tip device and forklift pockets. - with heavy-duty castors Length 1900 mm Width 810 mm Height 860 mm Internal dimensions (LxWxH) 1.5 x 0.74 x 0.78 Capacity 600 l weight approx.: 150 kg, Approx. Onsite Dimension. (l x w x h): 1,900 x 810 x 860 mm
