used FASTI for sale

sheet width: 1030 mm plate thickness: 2,50 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 0,80 t dimensions of the machine ca.: m Manually adjustable back gauge up to 530 mm Cutting angle adjustment Side stop and table extension Knife sharpened The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3000 mm plate thickness: 10,00 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 10,00 t dimensions of the machine ca.: 3,60 x 2,50 x 2,05 m • Controlled back gauge 10 - 1000 mm • Angle stop 1600 mm • 3 additional support arms • Automatic cutting gap adjustment • Automatic cutting angle adjustment • Cutting edge lighting • Cutting length limit The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2040 mm plate thickness: 3,00 mm distance between columns: mm bending angle: 135 ° upper beam stroke: 350 mm engine output: 4 kW total power requirement: kW weight of the machine ca.: 2,50 t dimensions of the machine ca.: 3,20 X 1,60 X 0,90 m - with different OW rails, especially segmented tools - Footswitch - Manual operation Machine is repaired, checked, cleaned by a specialist and is then complete functioning. Test run is carried out. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2040 mm plate thickness: 2,00 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 1,80 t dimensions of the machine ca.: m Manual and automatic bending process possible Bending angle adjustable via potentiometer Stroke height of the upper beam and material thickness can be preselected via DIP switches Polished bending rail The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2.100 mm plate thickness: 3 mm distance between columns: 2.100 mm weight of the machine ca.: 3 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: max. 1,5 mm sheet width: max. 1.020 mm Year: ca. 1970 manual: : : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 103 mm weight: 300 kg drive: ja : Gußhebel abgebrochen The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 3.0 mm throat: max. 500 mm work speed: 6.0 + 12.0 m/min distance: Walze 125 / 150 mm roll diameter: 125 mm voltage: 400 V total power requirement: 1.3 / 1.8 kW weight of the machine ca.: 1250 kg range L-W-H: 1200 x 800 x 1200 mm good condition () Furnishing: - heavy / robust beading machine - electric motor drive - Manual delivery of the top roller using a handwheel - pole-changing motor - 1x adjustable stop plate - 1x freely movable double foot switch - original instruction manual Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9475037 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1520 mm plate thickness: 4.50 mm thickness at Niro-steel: 2.25 mm distance between columns: 1600 mm stroke of upper beam: 360 mm work height max.: 900 mm adjustment: UW 100 mm total power requirement: 8.25 kW weight: 3000 kg range L-W-H: 2480 x 975 x 2080 mm Furnishing: - robust motorized folding machine 2x drive motors with 4.0 KW each - swiveling control panel, front right - Angle adjustment via electric. Potentiometers including digital actual values 1x coarse adjustment / 1x fine adjustment Adjustment 0.1 degrees - Manual & automatic mode selectable - Coding switch for opening width of the upper beam - 1x bending tool set - manual adjustment of the lower beam - 1x freely movable double foot switch - User manual (PDF) Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9355099 Machine video: https://www.youtube.com/watch?v=hC_j3FqEE ...

sheet width: 2540 mm plate thickness: 2.50 mm distance between columns: 2600 mm daylight opening: OW 300 mm adjustment: UW 115 mm pivoting angle: 180 Grad work height max.: 910 mm back stop - adjustable: bis 690 mm voltage: 400 V total power requirement: 3.8 kW weight: 2250 kg range L-W-H: 3640 x 1750 x 1600 mm maintained condition () Furnishing: - robust electro-motive folding machine - Bending angle adjustment via electric potentiometer infinitely adjustable with digital value display - manual % automatic mode selectable - Electrical adjustment of the travel paths of the upper beam - manual lower beam adjustment up to 115 mm - 1x set of bending tools (installed / used condition) - freely movable double foot switch - manual material back gauge, adjustable at the back Adjustment range up to max. ~ 690 mm - User manual (PDF) Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/date ...

pressure: 80.0 t chamfer lenght: 2550 mm distance between columns: 2060 mm ajustment speed: 90.0 mm/sec working feed: 10.0 mm/sec return speed: 90.0 mm/sec stroke: 140 mm work height max.: 930 mm dayligth: 375 mm Number of working hours: ca. 1.300 h total power requirement: 8.5 kW weight: 6300 kg range L-W-H: 2830 x 1900 x 2500 mm Machine from a vocational training center (Chamber of Crafts) good / well-maintained condition with only approx. 1.300 operating hours () Furnishing: - CNC electro-hydraulic press brake - DELEM CNC control - model DA 58 Swivel control panel, front left 2D graphical programming & product display Tool & program library - CNC axis control: Y1 - Y2 - X axis + motorized crowning - electro-motorized & controlled backgauge with 2x manually movable stop fingers (R+Z axis) - manual upper tool & lower tool clamping - split upper and lower tools - 2x stable, front  ...

sheet width: 1270 mm plate thickness: 1,75 mm ST plate thickness: 2,00 mm ALU plate thickness: 2,50 mm KU thickness at Niro-steel: 0,80 mm distance between columns: 1300 mm daylight opening: OW ~ 380 mm work height max.: 900 mm adjustment: UW 60,0 mm bending angle max.: 180 ° weight: ca. 200 kg kg range L-W-H: 2000 x 520 x 1500 mm good condition () Bending splint e.g. reground Furnishing: - robust, manual folding machine - manual lifting by hand lever (incl. gas pressure damper) - manual clamping of the upper beam by means of a handwheel on the side - manual lower beam adjustment - Bending angle fixed stop, with analogue angle display - Upper beam with large opening width - Instructions / description Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9355182 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2540 mm plate thickness: 3.25 mm throat: 100 mm no. of strokes: 60.0 Hub/min back stop - adjustable: 530 mm voltage: 400 V engine output: 7.5 kW weight: 2450 kg range L-W-H: 3600 x 1000 x 1560 mm Furnishing: - robust electric motorized guillotine shears - stable, front support/work table - Front control panel - including emergency stop button - manual back gauge up to approx. 700 mm - adjustable by handwheel, with analogue mm scale display - 1x front side stops - 3x front support arms - manual cutting gap adjustment - Cut/lift confirmation by foot pedal - 1x freely movable foot switch - rear sheet metal slide - User manual (PDF) Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9325320 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2040 mm plate thickness: 2.5 mm pre-bending: 2.0 mm diameter of upper rolls: 110 mm side roll diameter: 110 mm diameter of lower rolls: 110 mm speed: 6.0 m/min voltage: 400 V total power requirement: 1.5 kW weight of the machine ca.: 1250 kg range L-W-H: 3020 x 670 x 1010 mm Furnishing: - robust electro-mechanical three-roller drive - Driven by spur gear brake motor + countershaft - asymmetrical roller arrangement - electrical delivery of the rear roller with automatic electrical switch-off Setting min./max. travel distance possible - Rotatable control panel, front right - swing-out top roller, with folding bearing - Conical bending device - freely movable double foot switch Right/left rotation of the rollers - Manual delivery of the bottom roller using a handwheel with analogue position display - User manual (PDF) Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/ ...

sheet width - max.: 1255 mm plate thickness: 4,0 mm ST plate thickness: 2,0 mm VA plate thickness: 6,0 mm ALU number of strokes - loaded: ~ 66 Hübe/min. cutting angle: 1,5 ° total power requirement: 5,5 kW weight of the machine ca.: 2600 kg. range L-W-H: 2300 x 1800 x 1800 mm Machine from a technical college - prototype construction very well-maintained condition () Furnishing: - electro-hydraulic guillotine shears - manual backgauge with analogue position display (scale + magnifying glass) - electrical cutting length limitation - manual cutting gap adjustment - 1x extra long side stop - 2x extra long support arms - 1x free moving footswitch - rear sheet metal slide - User manual (PDF) Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9325278 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width - max.: 2035 mm plate thickness: 6.0 mm ST plate thickness: 4.0 mm VA plate thickness: 8.0 mm ALU number of strokes - loaded: 20 Hübe/min cutting angle: 1.7 ° work height max.: 900 mm Number of working hours: 1.450 h Control: LENORD total power requirement: 11.0 kW weight of the machine ca.: 4100 kg range L-W-H: 2416 x 2250 x 1760 mm Machine from prototype construction Machine with only approx. 1.450 operating hours () Furnishing: - electro-hydraulic guillotine shears - electro-motorized backgauge with NC control unit (Lenord + Bauer) - electrical cutting length limitation - manual cutting gap adjustment - 1x stable side stop, with scale and tilting cam - 2x front support arms - 1x freely movable foot switch - Operating instructions (PDF) + circuit diagram Special accessories included: - pneumatic sheet metal holding device for thin sheet metal cuts Machine link: http: ...

sheet width: 3040 mm plate thickness: 4 mm distance between columns: / mm total power requirement: / kW weight of the machine ca.: / t required space: / m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sheet thickness: 5,00 mm Folding length: 2540 mm Depth rear gauge: 0 mm CNC Brand: Fasti CNC Model: Matik CNC MACH-id  3495 MAKE   FastiTYPE   215 - 25 - 05 YEAR   SPECIFICATIONS   Controll Fasti Matik CNC Pressbrake / Folding / Mech. / Hydr.  Folding Machine   Hydraulic / Mechanical   Hydraulic Bending length   2.540 mm Press force  5 mm    

Sheet thickness: 6,00 mm Folding length: 2040 mm Depth rear gauge: 600 mm MACH-id  3471 MAKE   Fasti Germany TYPE   212 - 20 / 6 YEAR  2002 SPECIFICATIONS Pressbrake / Folding / Mech. / Hydr   .Folding machine Bending length  2040 mm Press force   6 mm Ton Stroke  350 mm upper beam mm Backgauge stroke X in mm  0 - 600 mm Power  7.5 kW

Sheet thickness: 4,5 mm Bending length: 1270 mm Number of rolls: 3   A-Symetric rolls 700 N/mm2 Conical bending attachment Upper rolll swivabel Central lubrication   Rolling width:                 1270mm Rolling thickness 5x toproll Ø:4,5mm Rolling thickness prebending:  4,5mm Top Roll Ø:                    130mm Bottom Roll Ø:                 130mm Side roll Ø:                   130mm Number of rolls:               3 Rolling speed:                 6 M/Min Power:                         2,2kW Height:    &nb ...

Sheet thickness: 10,00 mm void: 0 Table length: 2000 mm Table width: 0 mm Knife length: 0 mm MACH-id       517 MAKE            Fasti        TYPE              528 20/10 YOP               2003 SPECIFICATIONS Cutting lenght      2000 mm Maximum sheet thickness      10 mm Backgauge stroke X in mm        1000 mm Power resonator  kW / Amp      15 kW DIMENSIONS Length         2800 mm Width           2625 mm Height         2080 mm

Sheet thickness: 4,00 mm Folding length: 3200 mm Depth rear gauge: 0 mm CNC Brand: Delem CNC Model: DA 65 MACH-id   5164 MAKE        Fasti Schroder Germany TYPE          215 - 32- 4 YOP            1998 SPECIFICATIONS Control     Delem DA 65 Pressbrake / Folding / Mech. / Hydr.     Folding machine Hydraulic     Hydraulic / Mechanical      Hydraulic Bending length    3200 mm Stroke      350 mm Die height       80 mm Power      7 .5 Kw DIMENSIONS Length       4000 mm Width         3000 mm Height        2000 mm

one pass rolling and curving machine dia of upper roll (steel): 100 mm dia of under roll (rubber): 270 mm

Equipment consists out of: 1 - Three decoilers 2 - Sheetholder with three levels 3 - Fasti straightening unit 4 - Fasti shear Transversal cut to length line / Querteilanlage / installation de coupe en longueur

Fasti 2040 x 3 mm Max worklength: 2040 mm Max tickness: 3 mm Distance between clampblock -- ram: 80 mm Eletric motor (power): 2,2 kW Weight: 2460 kg

Working width: 2040mm, max. sheet thickness: 3mm.

NC controlled edge bending machine, manufactured by Fasti Germany type 212-20-6 - 2050 x 6 mm. Thickness of bent steel sheet (St40) 6 mm - Alu 8 mm, INOX 4 mm, bending length 2050 mm. Control of the bending angle and departures of the NC bumper. Manual and automatic operation mode. Setting the bending angle to max. 135 degrees. Electro-mechanical drive. Jaw opening 350 mm. 6 kW drive. Weight 4500 kg.

CNC controlled edge bending machine, prod. Fasti Germany type 212-30-4 - 3040 x 4 mm. Bending sheet thickness Steel(St40) 4 mm- Alu 8 mm, INOX 3 mm, bending length 3040 mm. Control of bending angle and bumper departures from CNC, programs. Setting the bending angle to max. 135 degrees. Hydraulic-mechanical drive. Jaw opening 350 mm. Drive 6 kW. Weight 4500 kg.

CNC-controlled edge bending machine, manufactured by Fasti Germany type 215-32-4 - 3240 x 4 mm. Thickness of bent steel sheet (St40) 4 mm - Alu 8 mm, INOX 3 mm, bending length 3040 mm. Control of bumper departures with CNC, programs. Setting the CNC bending angle and bending radius. Hydraulic drive. Jaw opening 350 mm. 6 kW drive. Weight 6000 kg. High sectional punches for channels. Documentation

Thickness of bent steel sheet (St40) 4 mm - Alu 8 mm, INOX 3 mm, bending length 3040 mm. Control of bumper departures with CNC, programs. Setting the CNC bending angle and bending radius. Hydraulic drive. Jaw opening 350 mm. 6 kW drive. Weight 6300 kg. High sectional punches for channels. Hydraulic punch mounting Documentation

sheet width:5040 mm plate thickness:2 mm total power requirement:12 kW weight of the machine ca.:9,4 t dimensions of the machine ca.:6200× 1300 ×1900 mm working width:5000 mm control:Fasti Matik stroke of upper beam:500 mm adjustment of lower beam:u.Biegewange 80 mm control cabinet:1000 x 850 x1450 mm Documents:vorhanden

Description: Round bending machine - round roll manually - type 102/10/1.5 max. rolling length 1020mm max. sheet thickness 1.5 mm Roller diameter 65 mm Training machine is in used but very good condition. plate width: 1,020 mm, mat. thickness when pre-bending when rounding: 1,5 mm, number of rolls: 3, weight approx.: 190 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 450 x 1,100 mm

Description: Furnishing: - Digital display - Bending angle preselection Sheet width 2040 mm Sheet thickness 3.0 mm Stand width 2100 mm Bending angle max. 135 degrees Total power requirement 4.0 kW Machine weight approx. 2.2 t Dimensions L-W-H 23.1 x 1.0 x 1.7 m weight approx.: 2,200 kg, Approx. Onsite Dimension. (l x w x h): 3,100 x 1,000 x 1,700 mm

Description: Sheet width 2040 mm Sheet thickness 2.0 mm Stand width 2100 mm Bending angle max. 135 degrees Total power requirement 1.5 kW Machine weight approx. 1.7 t Dimensions L-W-H 2.9 x 1.0 x 1.7 m weight approx.: 1,700 kg, Approx. Onsite Dimension. (l x w x h): 2,900 x 1,000 x 1,700 mm

Electric clutch, electromagnetic clutch for guillotine shears, tin snips, tin guillotine shears, crank guillotine shears, eccentric press -for: guillotine scissors crank guillotine scissors -Equipment: clutch, transformer, control -Manufacturer: LABOD electronic -Type: GN 6 DZ.4Q.80 -Total net weight: 160 kg

Punch, punching machine, punching device, hole punching machine, row punch, punching unit, Mehrkopfpstanze, punching system, -Distribution: 8 x punching pairs with a distance of 60 mm (O 4 mm) -Distance between the two outer punch pairs: 975 mm - Distribution: distance 75 - 165 - 165 - 165 - 165 - 165 - 165 - 75 mm -Max. Passage width: 1000 mm -Drive: electric -Weight: 260 kg

Punch, punching machine, punching device, hole punching machine, row punch, punching unit, multi-head punch, punching system, -Number: 5x punching -Max. Width: 1000 mm -Tool built-in: 8x45 mm -Distance punch: 187 mm -driven: electric -Weight: 280 kg

Plate shears, sheet metal shears, sheet metal shears, crank plate shears, guillotine shears -Manufacturer: Fasti, mechanical guillotine shears type 506/20/2 -Cutting width: 2030 mm -Max. Cutting thickness: 2.0 mm -Back gauge: adjustable by hand -Throat: 545 mm -Stroke: continuous stroke / single stroke / tapping -Setup dimensions: 2505/1650/H1150 mm -Transport dimensions: 2505/1100/H1150 mm -Weight: 1200 kg

Bending tool, die, upper knife, upper tool, upper beam -Tool: comes from a Fasti type 211-32-2.5 folding machine -Transfer in current condition as seen -partially damaged -Pointed tool -Dimensions: 75 x 15 mm -Length: 3041 mm -Weight: 23 kg

Press brake, bending bench, bending machine, folding machine, die bending machine -Handover: in current condition as seen -Note: the right side of the upper beam was repaired (welded) -Condition: fully functional -Manufacturer: Fasti, folding machine type 2095-25-2 -Max. Working width: 2540 mm -Max. Sheet thickness: 2 mm -Opening width: 290 mm -Connected load: 3.7 kW -Clamping: via threaded spindle -Bending angle: adjustable via potentiometer -Dimensions: 3615/1790/H1780 mm -Total weight: 2760 kg -Handover in current condition as seen

Fold former, folding machine, form folding machine, profiling machine, profiling system -Transfer: in the current condition as seen -Machine: has no motor and is therefore sold as a spare parts carrier -Profiling stations: 7 pieces -Sheet thickness max: 1.5 mm -max web height: 20 mm -1x set of rollers: -Work shaft diameter: Ø 28 mm -Center distance of the working shafts: -vertical: mm -horizontal: mm -Dimensions: 1460/740/H1050 mm -Weight: 352 kg

Fold former, folding machine, form folding machine, profiling machine, profiling system -Max. Working width: 1260 mm -Profiling stations: 7 -Sheet thickness: max. 1.0 mm -2x set of rollers -Motor: 0.55/3.6 kW -Connection: 400 volts -Dimensions: 3150/1100/H1200 mm -Weight: 1700 kg

Hydraulic guillotine shears FASTI type 509 - TCHE 12/4 Masch. No. 4590 Year of construction 1986 Cutting length 1255 mm Cutting thickness at 400 N/mm² 4 mm Cutting thickness at 750 N/mm² 2.5 mm Back gauge 1000 mm controlled Shear angle 1.5 Hydraulic pressure max. 270 bar Motor power 7.5 kW Mains connection 400 volts, 50 Hz Back gauge with positioning control ELGO ELECTRIC Type 85 - manual cutting gap adjustment with dial gauge display on the right and left- infinitely variable cutting length adjustment - front angle stop left 1250 mm- 7 pieces hydraulic sheet metal hold-downs - electric foot switch - very solid and torsion-resistant welded construction - operating instructions with electrical plan, hydraulic plan space requirements L x W x H 1900 x 2200 x 1660 mm Weight 2600 kg good condition; used

Universal flanging machine, Border FASTI type 81504 - UBPB 1,5 Masch. Nr. 908152 013 Year of construction 1990 Sheet thickness max. 1.5 mm Sheet thickness min. 0.5 mm Flange height max. 12 mm Flange height min. 4 mm Flow speed 4 / 8 m/min. Roll diameter 60 mm min. inner radius of curvature at 90 arc piece 100 mm drive power 1.1 / 1.4 kW Mains connection 400 volts, 50 Hz cam standing seam head for the production of locking grooves on the vertical rebate - Sheet metal guide - Operating instructions Space requirements L x W x H 700 x 610 x 1250 mm Weight 150 kg very good condition; used

Pneumatic rebate bending machine FASTI Type 606 - 11 - 1.0 Folding machine for sheet metal folding Pre-bending For making a rebate bend Fabr. No. 9166002 Year of construction 1991 Working length: 1100 mm Material thickness at 45 kg/mm² 1 mm compressed air requirement 6 bar - pneum. Foot switch roller lining via threaded toggle screws Space requirement L x W x H 1600 x 300 x 1050 mm Weight approx. 250 kg good condition The fold is the doubling of the sheet in the edge area, i.e. 1x turned over to increase the rigidity of the sheet. The envelope creates a rounded edge, which reduces the risk of injury by cutting at the sharp edge of the sheet. Ideal for sheet metal processing of sheet metal furniture, cladding panels or for ventilation and silencer construction.; used

Guillotine shears, FASTI type 506-10-2,5 Masch. Nr. 96-506-018 Year of manufacture 1996 Cutting length 1030 mm Cutting thickness 2.5 mm Working height 850 mm Drive power 4 kW Mains connection 400 volts, 50 Hz. - mechanical sheet metal hold-down - electric foot switch - simple backgauge 550 mm with handwheel adjustment - 2 support arms 550 mm - angle stop right 750 mm - protective housing SICK behind the machine - control cabinet fixed to the machine space requirement L x W x H 2150 x 1650 x 1400 mm weight 650 kg good condition; used

Universal Folding Former, Folder FASTI Type 81501 Fabr. No. 928151 015 Year of construction 1992 Sheet thickness max. 1.5 mm Sheet thickness min. 0.5 mm Number of roller stadiums 7 pieces Profile height approx. 20 mm Centre distance of the rebate shafts 100 mm Working height 900 mm Working speed 7 and 14 m/min. Motor power 2.3 / 3 kW (pole switchable) Mains connection 400 volts, 50 Hz. - two speeds via pole-switchable drive motor - Standard roller set No. 5 for single and double standing seam- Roller set No. 11 for folding seam- Center rollers for S-fold - Pair of rollers for the production of locking cams in a standing seam - Instruction manual with electrical plan Space requirements L x W x H 1500 x 660 x 1100 mm Weight 450 kg very good condition; used