used FRAMA for sale

We offer the following Doka Framax elements: Formwork completely cleaned, inspected and sorted. Formlining fair-faced concrete class 2/3 possible without any problems. Out-of-the-box, suitable for higher-value use. Doka Framax Xlife 1483,92m² with 75% discount on the original price! New value: 839.448,00€ Special net price: 209.862,00€ Pcs. Art.-No. Designation 48 588608500 Framax Xlife element 2.70x3.30m 40 588109500 Framax Xlife element 2.70x2.70m 10 588103500 Framax Xlife element 2.40x2.70m 120 588100500 Framax Xlife element 1.35x2.70m 60 588102500 Framax Xlife element 0.90x2.70m 64 588110500 Framax Xlife element 1.35x1.35m Total: 209.862,00€ Accessories available on request. If you have any questions, please contact Mr. Becker on 0049 176 70044689 purchase and sale of scaffolding/formwork systems and construction machinery; Formwork r ...

We offer the following Doka Framax elements: Formwork cleaned, inspected and ready for immediate use. Ready for use for SB2/3 without any problems. Doka Framax Xlife 3,30m with 70% discount = 1641,00€/pc. net. 32 x Framax Xlife-Element 2.70x3.30m Accessories available on request. If you have any questions, please contact Mr. Becker on 0049 176 70044689 purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Master Craftsman Company Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 Mobile: 0049 176 70044689 Mr. Becker Office/ Warehouse Address: Birkenstraße 15 89185 Humlangen- Hüttisheim E-mail: sfsystemst-online.de Ulm Registry Court: HRA722943 VAT NUMBER: DE279047055

We offer a Doka Framax 270 wall formwork complete with accessories 270.81m² The formwork is in original Doka rental warehouse quality, partly newly covered with original Doka Xlife formwork. Controlled and sorted. Suitable for higher-value applications. Accessories original Doka rental warehouse quality. Exposed concrete class 2/3 possible without any problems. New value approx. 203397,00€ Special net price 75421,00€ 12 588109500 Framax Xlife element 2.70x2.70m 10 588103500 Framax Xlife element 2.40x2.70m 10 588100500 Framax Xlife element 1.35x2.70m 10 588102500 Framax Xlife element 0.90x2.70m 4 588122500 Framax Xlife-Uni-Element 0.90x2.70m 8 588104500 Framax Xlife element 0.60x2.70m 4 588105500 Framax Xlife element 0.55x2.70m 8 588106500 Framax Xlife element 0.45x2.70m 8 588108500 Framax Xlife element 0.30x2.70m 8 588130500 Framax Xlife inner corner 2.70m 8 ...

We offer the following Doka Framax elements: Doka Framax Xlife 1.35 x 1.35m with 75% discount = 274,50€/pc net. 64 x Framax Xlife element 1.35x1.35m Accessories available on request. Formwork completely cleaned, inspected and sorted. Formlining fair-faced concrete class 2/3 possible without any problems. Out-of-the-box, suitable for higher-value use. If you have any questions, please contact Mr. Becker on 0049 176 70044689 purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Master Craftsman Company Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 Mobile: 0049 176 70044689 Mr. Becker Office/ Warehouse Address: Birkenstraße 15 89185 Humlangen- Hüttisheim E-mail: sfsystemst-online.de Ulm Registry Court: HRA722943 VAT NUMBER: DE279047055

We offer a Doka Framax Xlife 3.30m with 75% discount - 423.55m² New value: 297.446,00€ - Special net price 74.500€ + VAT Complete with accessories on request. Formwork completely cleaned, inspected and sorted. Formlining fair-faced concrete class 2/3 possible without any problems. Out-of-the-box, suitable for higher-value use. Pcs. Description 32 Framax Xlife element 2.70x3.30m 2 Framax Xlife element 1.35x3.30m 4 Framax Xlife element 0.90x3.30m 3 Framax Xlife-Uni-Element 0.90x3.30m 5 Framax Xlife element 0.60x3.30m 4 Framax Xlife element 0.55x3.30m 5 Framax Xlife element 0.45x3.30m 3 Framax Xlife element 0.30x3.30m 22 Framax Xlife inner corner 3.30m - new Finply formlining 14 Framax Xlife inner corner 3.30m 2 Framax Xlife outer corner 3.30m 3 Framax hinge corner I galvanized 3.30m 3 Framax stripping corner I 3.30m If you have any questions, pleas ...

We offer the following Doka Framax elements: Doka Framax Xlife 2.70 x 0.90m with 75% discount = 356,00€/pc. net. 60 x Framax Xlife-Element 2.70x2.70m Accessories available on request. Formwork completely cleaned, inspected and sorted. Formlining fair-faced concrete class 2/3 possible without any problems. Out-of-the-box, suitable for higher-value use. If you have any questions, please contact Mr. Becker on 0049 176 70044689 purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Master Craftsman Company Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 Mobile: 0049 176 70044689 Mr. Becker Office/ Warehouse Address: Birkenstraße 15 89185 Humlangen- Hüttisheim E-mail: sfsystemst-online.de Ulm Registry Court: HRA722943 VAT NUMBER: DE279047055

We offer a position Doka Framax Alu 186,759m² in good ready-to-use condition with up to 75% discount! Partially new formwork - new value = 176.805,40€ Special net price 53.512,74€ Formwork completely cleaned, inspected and sorted. Formlining exposed concrete class 2/3 or newly covered with Finply formwork. Out-of-the-box, suitable for higher-value use. Pcs. Designation 28 Alu-Framax Xlife-Element HK 0.90x 2.70m 3 Alu-Framax Xlife-Element HK 0.90x 2.70m – newly occupied 3 aluminium Framax Xlife element HK 0.75x 2.70m 1 aluminium Framax Xlife element HK 0.75x 2.70m – newly occupied 15 Alu-Framax Xlife-Element HK 0.60x 2.70m 5 Alu-Framax Xlife-Element HK 0.60x 2.70m – newly occupied 10 aluminium Framax Xlife element 0.45x 0.90m 3 Alu-Framax Xlife element 0.45x 0.90m – newly occupied 3 aluminium Framax Xlife element 0.30x 2.70m 7 Alu-Framax Xlife el ...

We offer the following Doka Framax elements: Doka Framax Xlife 2.70 x 2.70m with 75% discount = 1065,50€/pc. net. 21 x Framax Xlife-Element 2.70x2.70m Accessories available on request. Formwork completely cleaned, inspected and sorted. Formlining fair-faced concrete class 2/3 possible without any problems. Out-of-the-box, suitable for higher-value use. If you have any questions, please contact Mr. Becker on 0049 176 70044689 purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Master Craftsman Company Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 Mobile: 0049 176 70044689 Mr. Becker Office/ Warehouse Address: Birkenstraße 15 89185 Humlangen- Hüttisheim E-mail: sfsystemst-online.de Ulm Registry Court: HRA722943 VAT NUMBER: DE279047055

We offer a Doka Framax wall formwork 201m² in original Doka rental warehouse quality. Special net price 46700,00€ + VAT New value approx. 146166€ Complete with accessories, also original Doka rental warehouse quality. Formwork completely cleaned, inspected and sorted. Formwork lining original Doka Xlife exposed concrete class 2/3 possible without any problems. Out-of-the-box, suitable for higher-value use. Partially reassigned. 10 588103500 Framax Xlife element 2.40x2.70m 16 588100500 Framax Xlife element 1.35x2.70m 10 588102500 Framax Xlife element 0.90x2.70m 8 588122500 Framax Xlife-Uni-Element 0.90x2.70m 6 588104500 Framax Xlife element 0.60x2.70m 4 588105500 Framax Xlife element 0.55x2.70m 6 588106500 Framax Xlife element 0.45x2.70m 6 588108500 Framax Xlife element 0.30x2.70m 4 588130500 Framax Xlife inner corner 2.70m 4 588126000 Framax outer corner ...

We offer the following Doka Framax elements: Doka Framax Xlife 2.70 x 2.70m with new original Doka Xlife plate with 55% discount = 1917.90€/piece net. 12 x Framax Xlife-Element 2.70x2.70m Accessories available on request. Formwork completely cleaned, inspected and sorted. Formlining fair-faced concrete class 2/3 possible without any problems. Out-of-the-box, suitable for higher-value use. If you have any questions, please contact Mr. Becker on 0049 176 70044689 purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Master Craftsman Company Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 Mobile: 0049 176 70044689 Mr. Becker Office/ Warehouse Address: Birkenstraße 15 89185 Humlangen- Hüttisheim E-mail: sfsystemst-online.de Ulm Registry Court: HRA722943 VA ...

We offer the following Doka Framax elements: Doka Framax Xlife 2.70 x 1.35m with 75% discount = 453,00€/pc. net. 120 x Framax Xlife element 2.70x1.35m Accessories available on request. Formwork completely cleaned, inspected and sorted. Formlining fair-faced concrete class 2/3 possible without any problems. Out-of-the-box, suitable for higher-value use. If you have any questions, please contact Mr. Becker on 0049 176 70044689 purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Master Craftsman Company Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 Mobile: 0049 176 70044689 Mr. Becker Office/ Warehouse Address: Birkenstraße 15 89185 Humlangen- Hüttisheim E-mail: sfsystemst-online.de Ulm Registry Court: HRA722943 VAT NUMBER: DE279047055

We offer a Noe Top 2000 wall formwork in ready-to-use condition. Most of the elements are galvanized and covered with plastic formwork. Price without accessories 99,00€/m² 28 pieces 3.31m x 2.65m 8 pieces 2.65m x 1.32m The formwork is compatible with the Doka Framax and so are the accessories. Doka accessories available on request. If you have any questions, please contact Mr. Becker on 0049 176 70044689 Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Master Craftsman Company Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 Mobile: 0049 176 70044689 Mr. Becker Office/ Warehouse Address: Birkenstraße 15 89185 Humlangen- Hüttisheim Ulm Registry Court: HRA722943 VAT NUMBER: DE279047055

We offer a Doka Framax Xlife plus 163.67m² with a 65% discount. Original value: €112,280.00 - Special net price €39,298.00 + VAT Complete with accessories on request. Formwork completely cleaned, checked and sorted. Formlining exposed concrete class 2/3 possible without any problems. Ready to use, suitable for higher-value operations. Piece designation 1 Framax Xlife plus Element 2,70x3,30m 8 Framax Xlife plus Element 1,35x3,30m 8 Framax Xlife plus Element 0,90x3,30m 6 Framax Xlife plus Element 0,75x3,30m 5 Framax Xlife plus Element 0,60x3,30m 2 Framax Xlife plus Element 0,55x3,30m 17 Framax Xlife plus Element 0,45x3,30m 1 Framax Xlife plus Element 0,30x3,30m 4 Framax Xlife plus-Element 1,35x2,70m 2 Framax Xlife plus-Element 0,90x2,70m 1 Framax Xlife plus-Element 0,75x2,70m 6 Framax Xlife plus-Element 0,60x2,70m 2 Framax Xlife plus-Element 0,55x2,70 ...

We offer: 12 x Doka Framax 330 inner corner, overhauled, covered with new Finply formlining! Original value 1704,00€ with 65% discount á 596,40€/ piece + VAT. The elements are controlled and sorted. Suitable for higher-value applications SB3 Top condition! Offer only valid while stocks last, subject to prior sale! If you have any questions, please call 0049 176 70044689 Mr. Becker Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 Mobile: 0049 176 70044689 Mr. Becker Office/ Warehouse Address: Birkenstraße 15 89185 Humlangen- Hüttisheim E-mail: sfsystemst-online.de Register Court Ulm: HRA722943 VAT ID NUMBER: DE279047055

Doka Framax column stage NEW with 50% discount on the new price! Top condition! 1 x Doka support platform 150/90cm - 1633,50€ 1 x System Ladder XS 4.40m - 123.50€ 1 x Back guard exit XS - 135,50€ 1 x Connection XS Framax/Alu-Framax - 77,50€ 1 x Connection XS Support Platform - 43,05€ Prices are excl. VAT and transport Sale reserved If you have any questions, please contact Mr. Becker on 0176-70044689 the sale and sale of scaffolding/formwork systems and construction machinery; Formwork restoration on fair terms. Company SFS Meisterbetrieb Andreas Becker e. Kfm. mobile: 0049 176 70044689 Mr. Becker Office/warehouse address: Birkenstraße 15 89185 Humlangen- Hüttisheim Register court Ulm: HRA722943 UST-ID-NR: DE279047055

Doka Alu Framax 127 m2 Good condition of frame and formwork skin (partly new Finply formwork skin or used X-Life formwork skin) Due to its lower weight, the aluminium frame formwork is suitable for shelling with and without a crane. Also seamless in combination with Framax steel formwork suitable. Lightweight and versatile due to sturdy profile frame made of aluminium Reduced workload when shelling by hand due to low element weight, with a high load capacity of 60 kN/m² can be implemented by hand or by crane thanks to frames made of torsion-resistant aluminium hollow sections Division into crane and hand formwork areas 20 x Element 0,90x2,70m 20 x Element 0,75x2,70m 14 x Element 0,60x2,70m 6 x Element 0,45x2,70m 6 x Element 0,30x2,70m 2 x Outer corner 2,70m 2 x Inner corner 2,70m Partial quantities are also possible! Doka Alu Framax 127 m2 Good condition ...

The frame and the formwork is in a used good condition and can be used immediately. 26x Framax 1.35x2.70m 10x Framax 0.90x2.70m 6x Framax 0.60x2.70m 4x Framax 0.45x2.70m 4x Framax 0.30x2.70m 4x Framax 0.90x2.70m Uni 4x Framax inner corner 2.70m 2x Framax outer corner 2,70, 120x Framax RU Clamp 10x Framax Uni Spanner 10x Framax Universal Connector 10-16cm 12x Framax clamping clamp 4x Framax clamping rail 0.90m 2x Framax clamping rail 1.50m 1x Framax conversion bracket Other quantities or elements are available on request. Frame formwork Framax The high-performance steel frame formwork for large-area shelling with the crane Framax is the frame formwork system that achieves a consistent 15 cm grid with only a few elements, whether used standing or lying. All fasteners, all accessories blend seamlessly into the grid for fast formwork times and high cost-effectiveness ...

With its 15 cm clamping range, the Framax multi-function clamp matches the panel size-grid exactly. This means that only one closure is needed per wall plane.

The frames and skin are in a good, very good condition. Parts with new finply. 40x Framax 1,35x2,70m 22x Framax 0,90x2,70m 8x Framax 0,60x2,70m 8x Framax 0,45x2,70m 8x Framax 0,30x2,70m 10x Framax 0,90x2,70m Uni 4x Framax Insidecorner 2,70m 4x Framax Outside corner2,70, 312x Framax RU Clamp 20x Framax Universal fixing bolt10-16cm 24x Framax wedge clamp 12x Framax Universal walling 0,90m 12x Framax Universal walling 1,50m 20x Framax bracket 90 5x Panel strut 340 2x Framax lifting hook 210x tie rod 1,00m 420x super plate 15 2x Doka Box 1,20x0,80m Framed formwork Framax Xlife The high-performing steel-framed formwork for crane-assisted forming of large areas Framax Xlife is the framed formwork system that uses only a very few different panel formats to achieve a consistent 15 cm increment-grid, no matter whether the panels are stood upright or on their sides. All t ...

The frames and skin are in a good working condition with used X-Life and parts of it are new with Fin-Ply. 6x Framax 2,40 x 3,30m 66x Framax 1,35 x 3,30m 27x Framax 0,90 x 3,30m 45x Framax 0,60 x 3,30m 8x Framax 0,55 x 3,30m 2x Framax 0,50 x 3,30m 14x Framax 0,45 x 3,30m 15x Framax 0,30 x 3,30m 1x Framax Uni 1,20 x 3,30m 4x Framax Uni 0,90 x 3,30m 22x Framax Inside corner 3,30m Framed formwork Framax Xlife The high-performing steel-framed formwork for crane-assisted forming of large areas Framax Xlife is the framed formwork system that uses only a very few different panel formats to achieve a consistent 15 cm increment-grid, no matter whether the panels are stood upright or on their sides. All the connectors and accessories fit seamlessly into this grid – making for fast forming-times and high efficiency. Rapid working as so few worksteps are involved forming ...

Code: 0195 Brand: FRAMAR Model: MBO-T9 - CE Standard Electronic horizontal chisel mortising machine for slots of different lengths and depths for window, shutter, balcony and door posts - CE Standard Technical data Tool motor power Hp 3 Hydraulic system motor power Hp 0,5 Worktable longitudinal stroke mm 350 Worktable transversal stroke mm 150 Head vertical stroke mm 80 Worktable dimensions mm 1000 x 250 Worktable height mm 850 Programmer and display for reading data and storing the various programs inserted N° 4 hydraulic pressors for clamping the pieces Aluminium guides with compensating stops Overall dimensions mm 1400 x 1200 x 1200 h Weight kg 580

PERTEN Inframatic Type Percon 8100 Checked by an PERTEN expert Sample measurements done. The device has been pre-adjusted. For final use, a recalibration with reference samples is required.

64 St Doka Framax X-life elements 1.35 x 2.70 m, in very good condition. Only request with company name, address and Tel/Fxannummern get answer.

Beer bottling line, Framax 9-8-1 filler, pressure filler, double pre-evacuation, module block RFCI 09-08-1 DPS-C, year of manufacture: 2015, set up on 330 ml + 500 ml bottles, with depalletizer, labeling machine, self-adhesive labels, bottle transport, case sealer. Beer Bottling line, Made by: Framax 9-8-1 Filler, Counter pressure filler, isobaric, double pre-evacuation, Modulblock RFCI 09-08-1 DPS-C, Year: 2015, adjusted to 330 ml + 500 ml 0,33 + 0,50 glass bottles, with Depalletiser, Labeller Labelling machine, self adhesive labels, Bottle conveyors, carton sealer.

1 used Framax Tribloc bottle filler, built in 2012, consisting of Borelli 9-digit rinser and 8-digit low vacuum / gravity filler type CIAO-xp with 1-digit Arol Eagle C 26 mm crown corker. Plant last used for filling beer (bottle fermentation) in 61 mm diameter 330 ml as well as 71 mm diameter 500 ml glass bottles at an output of 1,920 bottles/hour. Filler also suitable for bottling wine.

1 of used Framax tribloc bottling machine, new 2012, consisting of a Borelli 9-head rinser / 8-head low-vacuum/gravity filler CIAO-xp with single-head Arol Eagle C 26 mm crowner, Last running bottle-conditioned beer at 1.920 bph with handling parts for 61 mm diameter 330 ml and 71 mm diameter 500 ml glass beer bottles. Filler also ideally suitable for bottling wine.

Can Filling Line Wild Goose 3000 cph for Various Beverages – 2021 Excellent condition can filling line for beer, cider, cocktails, kombucha, wine and other beverages. The line consist of Zomerdink depalletizer with incorporated can rinser, Wild Goose Evolution 5 series filler-seamer block, Inline Filling Systems roll fed labeller for self adhesive labels and date coding, buffer table, semi-automatic Framax carton box erector-sealer and flexible roller conveyor for full carton boxes. Wild Goose patented seaming and filling technology has five filling time adjusted volumetric filling tubes and one head seamer with two seaming rolls. System has air pre-evacuation with CO2 before filling and after mechanical foam removal, full can tops are flushed with CO2 before placing a lids. After seaming, there is an outside can rinsing system with water. Filling process is fully automatic, contro ...

Design: Machine base and plinth integrated in a steel housing, composit concrete interior, Steel sleeves on the floor for fixing Table: welded steel plate structure Manufacturer: Framag hydropol Model: 7447 Overall dimensions: 3700x3200x3600mm Weight: 22000kg

saw blade diameter: 1250 mm cutting diameter: 380 mm cutting range: 480x320 mm motor speeds:: 3000 U/min feed speeds: 1000 mm/min main drive motor: 112 kW chip conveyor: cutting speed: 10-265 m/min total power requirement: 125 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working length: 6000 mm Working width: , mm Working height: , mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Overview The filler was built in 2012 by Italian manufacturer Framax. The filler comes with a Framax labelling machine. The machines have been regularly maintained and is already dismantled. Both machines can be viewed in person. Techn. Details Capacity: 1,800 bph (max. 2,200 bph) Processed format: 0,33 L Crown cap Filling monoblock | Framax | RFC‐09/08/1‐C 2K A/P | 2012 Rinser positions: 9 Filler positions: 8 Capper positions: 1 Suitable for natural beer Type of filling valve: EVO2 (15 mm) Max. diameter of bottle: 115 mm Min./ Max. height of bottle: 200 mm/ 350mm Dimensions: Length: 4,500 mm Width: 1,250 mm Height: 2,500 mm Self-adhesive labeller | Framax | LLACRSQ VAR STEP 3 label positions: front, back, neck Dimensions: Length: 2,700 mm Width: 1,200 mm Height: 1,700 mm

equipped with pneumatic clamping; 1 ELCO EM 14 control box

Manufacturer: Framar, Bauyeshr : 1992, Control: hand, Work stations: 1, Vertikal moulding unit: yes, Motor Kw: 3, Travel top to down mm: 120, Travel longitudinal mm: 275, Max door width mm: 1000, Max. mortise hole dimensions L X W X D mm: 20 X 75 X 110, Min. mortise hole dimensions L X W X D mm: 2 X 20 X 35, Automatic clamping system: yes, Incl. stopper system: yes, Trench deepth max mm: 110, Lifting device: yes, Wight approx. kg: 900, Year :1992

Overview For sale is a canning line for filling beer and other carbonated beverages, such as CSD or Sparkling Wine. The line is still assembled and can be inspected. As production volumes have increased, the line is too small with its current output and is being replacing it with a larger line. Standard 330ml and 440ml cans were produced on the line. Technical data  Output: 2.160 cans/ h at 440ml  Designed for standard 0.33l & 0.44l cans; retrofit to other formats possible  Machines Can pusher and rinser | Zomerdijk Engineering | 2021 Air rinser with ionized air | 2022 Can filler and seamer | Wild Goose | Evolution | 2019 5 Filling valves Checkweigher | Zomerdijk Engineering | 2022 Labeling machine | Framax  With color printing coder Buffer table | 2019 Semi-automatic packaging machine | Zomerdijk Engineering | 2021 Formats: 24s; 2x12s

Overview This labeller was built in 2014 by Italian manufacturer Framax. It is an automatic rotary self-adhesive labelling machine for glass bottles with a capacity up to 4,000 bottles per hour.  Techn. Details  Capacity: up to 4,000 bph (0,33l glass bottle, wrap-around label) 2 labelling stations  Max. height of the paper passage 200 mm Max. speed of the output of the paper: 32 m/min. Max. roller outer diameter 300 mm Max label length 180mm Voltage: 400V, 50 Hz  Stainless-steel pass-through conveyor belt (2.500 mm) Stop of the machine in case of container jam-up Low wear and noise levels due to alternated steel and zellamid transmission gears Self-adhesive labelling station speed variation automatically synchronized with the machine  Photocell for paper stop automatic self-regulation for the read-out of the different label colours Photocell of presence of the container Controls pan ...

Used complete bottling line FRAMAX year 2016 Configuration and Versatility The complete 2016 FRAMAX bottling line is currently configured for 330ml long neck bottles As the line has been used to produce beer A notable aspect is the inclusion of interchangeable parts for taller Vichy bottles demonstrating the versatility of the line The availability of replacement components for 500ml and 660ml bottles further amplifies this flexibility This system is supplied with a set of interchangeable parts for larger bottles presumably 660ml but these have never been used Dimensions and Capping Capacity of the Used complete bottling line FRAMAX year 2016 A point of technical interest is the beer line s ability to handle different sizes of caps in particular the 26mm and 29mm formats Currently the cap configuration is set to 26mm with replacement components available for larger caps This flexibility  ...

General SKU411T126 LocationBarneveld MakeClextral Framatome TypeEV 32 Mach.No.B 101 Main Features Motor52 KW Inlet diameter80 mm L/D36 Specified Features - Double screw extruder MaterialStainless steel 1.4306 (304L) Double screw extrudercheck Number of hours146.30 Screw diameter32 mm L/D36 Counter rotatingcheck Number of heating zones:8 Steam heatingcheck AC-motor45/52kW, 380-420/440-480/660 Volt, 1480/1780 rpm Feeding with metering screwcheck clextral C0 Number of temperature controllers:8 Information Year of construction2000 With switchgearcheck(as is) Total height3.26 CEcheck Floorspace4,3x1,42 m Weight3460 kg Extra Specificationsmachine comes with k-tron Feeder specifications: Type LWF D5/ Type K2-ML-T35/DR Dia: 400mm feeder inlet Outlet: 110mm Double screw extrudersClextralExtruders > Double screw extrudersBrand > Clextral What you can expect from Foeth ...

FRAMAX Bottling Machine - Manufactured: 2012. - 1920 bottles per hour, maximum. - 9 head rinser with motorised height adjustment. - 8 head gravity filler with manual height adjustment. - AROL Eagle C crowner for 26mm bottle crown caps with manual height adjustment. - 61mm and 70mm diameter change parts. - Filler originally designed for wine and was manufactured by Borelli. - Filler appears to be the Borelli CIAO+xp with an AROL capper instead of the standard corker. The machine has change parts for 330ml and 500ml