used ge calnetix gas generators

Make and Model: GE WHG-125 Year: 2011 Hours: 6000 approx. Year : 117 HZ : 50/60 Voltage: 400/480 V Scope of supply: Each ORC skid has its own heat exchangers for evaporation and condensing of the refrigerant (working fluid). You would need to install a water heat source and a water cooling circuit, no cooling towers or blowers are included with what we have in storage. Condition: These units have been decommissioned and been in storage since May 2016. Unit 1 and 2 had a report of an MBC fault (magnetic bearing controller). Unit 3 has several parts missing due to a failure in the power electronics. Some parts of the Power electronics, PLC, speed drive for the refrigerant pump are missing. Unit 4 had a failed heat exchanger and filled the ORC with water, would need stripping to determine the full extent of the repairs needed. Extra: These units run on a working fluid (refri ...

Make and Model: GE WHG-125 Year: 2011 Hours : 16,000 & 35,000 Capacity kW: 117 HZ : 50/60 Voltage: 400/480 V Scope of supply: Each ORC skid has its own heat exchangers for evaporation and condensing of the refrigerant (working fluid). You would need to install a water heat source and a water cooling circuit, no cooling towers or blowers are included with what we have in storage. Condition: The containerised units were decommissioned towards the end of 2018. Both of the units were operational before decommissioning. Unit 1 has the upgraded 3600 MBC (magnetic bearing controller). Both of the units are containerised at present but can be removed. Extra: These units run on a working fluid (refrigerant R245Fa) that does not come with the units as this was sent for recycling after commissioning. This will need to be purchased and filled during installation and commissioning.  ...

Make and Model: GE WHG-125 Year: 2011 Hours : 7155 and 6849 Capacity kW: 117 HZ : 50/60 Voltage: 400/480 V Scope of supply: Each ORC skid has its own heat exchangers for evaporation and condensing of the refrigerant (working fluid). You would need to install a water heat source and a water cooling circuit, no cooling towers or blowers are included with what we have in storage. Condition: These units have been decommissioned and been in storage since May 2016. Both of These units were operational at the time of decommission. Extra: These units run on a working fluid (refrigerant R245Fa) that does not come with the units as this was sent for recycling after commissioning. This will need to be purchased and filled during installation and commissioning . Price: €70,000 each

3 x GE CALNETIX HEAT TO POWER ORC GENERATOR Model: X2 Year: 2011 Hours: 10,000 Capacity: 125 kW Condition: Good. Operated on full maintenance contract Scope: Complete ORC unit Price: €80,000 each Yours sincerely, Edward Dulake Tel: (+44) 07595 426 731 Gas Engine Exchange Ltd

Stationaerer gas tank for heating system 2,800 litres Remaining capacity approx. 1,000 litres With foundation slab Last Pruefung faellig 2010 Free loaded truck Special price LPIque Propane LPG Vaillant White Head

Elster SM-RI-X-E G1600 Turbine Wheel Gas Meter Elster Turbine Wheel Gas Meters SM-RI-X-E-G1600-200-98.5-K (170) Qmax: 2500 m³/h Qmin: 130 m³/h pmax: 89.5 bar Item #: 10520813-2014 Pulse generator HF2 162,370 Imp/m³ Regular price: 21.540,-€ net

with new (2019) Burny Lincoln Phantom II touchscreen control Burny 8 software center-center rail: 5000 mm cuttingwidth: 4000 mm 3 gas cutting heads, each adjustable in height Cutting table not included Longitudinal travel X-axis: 18 meter Cross travel Y-axis: 5 meter Gas cutter: 3x Read-out / Control: Burny 8 Lincoln Phantom II

Plasmacutting machine for plates amp; tubes! Type: MG 12001.35PPr + CH1200PP 2 plasma cutting heads Hypertherm HPR130 powersource Esab Kjellberg Fine Focus 800 powersource

Complete gas measuring station, gas warning meter, Polytron IR Ex, Dräger, used Special price!! If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! The part was purchased from a spare parts warehouse of a company, is in very good condition and fully functional. The complete gas measuring device is installed in a Rittal distribution cabinet and consists of: - Rittal distribution cabinet 60 x 30 x 80cm high - Air intake pump, IKS Group, 7006 VD 2,3/E/AC - Gas detector Dräger, Polytron IR Ex, - Brooks variable area flow meter 1355/... - Isolating amplifier Pepperl u Fuchs KFA6-SR2-Ex1.W - Circuit breaker and other accessories The air intake pump sucks in the air from the outdoor area and brings it to the Polytron gas detector Ensuring the function In order to ensure functionality, the buyer must inspect or put the goods into  ...

Gas scrubbers, flue gas scrubbers KW 300 WT according to the enclosed product description and photos Price from place, loaded.

Type: MCCompact 4001.20 P Z-axis: 150 mm cap mild steel: 38 mm cap stainless steel: 25 mm cap alu: 25 mm Longitudinal travel X-axis: 4000 mm Cross travel Y-axis: 2000 mm Table dimensions: 4000 x 2000 mm Plasmasource: Hypertherm HPR130xd Gas cutter: 1x Read-out / Control: iMSNC 500 Weight: 4 ton

The automated plate processing line DS was designed for high-efficiency drilling and plasma cutting with the possibilities of automatic plate feeding and automatic part sorting on output. The machine is dedicated to heavy-duty structural steel applications such as production of high-precision fittings, gussets and end plates. Type: DS 6001.20P Plasma cutting: - 3D plasma bevelhead for cutting vertically and at an angle up to +-50° (auto calibration) - Hypertherm XPR 300 (piercing 45 mm / 6 mm straight cuts at 170 amp up to 200 mm/min) - max sheet size: 6000 x 2000 mm - material thickness: 3 gt; 30 mm - plasma marking - laser light Drilling: - MG-40 P26 drilling device ISO 40 - drilling range: dia 4 gt; 40 mm - thread cutting: M4 gt; M33 - max thickness: 100 mm - stroke: 400 mm - 26 kW on spindle - max 1829 rpm - automatic toolchanger; 8 toolpositions - external amp; internal tool coo ...

3 x Used Gas Generator Set JENBACHER Type: J 320 GS B02 / B05. With Control Panel and all standard accessories. two engines have been overhauled. 1x Motor KW / RPM: 852 / 1500 2x Motor KW / RPM: 1034 / 1500 --- Volts: 400/231 --- Hz: 50 --- Brandstof: Natural Gas --- Generator Type: Stamford --- Bouwjaar: 1996 / 1997 --- Draaiuren stand: 52.000 ---- We are located in the Netherlands (Province South Holland). In our stock we have more gas and diesel generators. For more information please feel free to contact us. You can call our language lines and speak to someone in one of the languages we support. Tel: +31 (0)6-22497850 George Modderkolk / Manager ( Dutch, English ) +31 (0)6-38639071 Leon Hensen / Sales ( Dutch, English ) Modderkolk Horti Services Gas Power Holland

WAUKESHA P9390GL 1 MW 400V / 50 Hz / 1000 rpm, only 6000 hrs, year 1996, dismantled from Landfill station

2 nos. unused MWM gas generator TCG2032V16 4.3MW 11KV / 50 Hz, year 2019

Gas generator generator generator used AC Generator Manufacturer Newage Engineers LTD Type Stamford HC434F Power 375 kVA / 1500 rpm 220/380 V Gas engine Manufacturer MWM Deutz Type TBG 234 V12 Built in 1988 Power 300 kW / 1500 rpm with heat exchanger BLOKLAND NON FERRO BV Type 275-2000 Area 20 m2 Dimensions total approx. 4100x1250x2400 mm + control cabinet approx. 1500 x 700 x 2100 mm

JENBACHER YEAR: 1997 HOURS: 23000h ELECTRIC POWER: 827 kW – 400V AC 50Hz The equipment is stowed and ready to load. This engine has been stopped regularly in 2011. VOLUME OF SUPPLY: They are integral parts of generators and groups necessary for their execution (gas input, output energy): ELECTRICAL GROUP: Engines JENBACHER 316 GS / 827 kWe Year 1997 , Operating hours: 23000h, 2 units. Alternator STAMFORD / 1000 kVA -800kW- 400V AC 50HZ Generator (alternator, motor and PLC motor) Control Panel Generator (DIANE XT) Auxiliary control panels Low voltage circuit breaker petrol train Silencer Slippers Technical documentation You can find us on Whatsapp: +34 611457522 Email: Sales@eurogensets.com

JENBACHER YEAR: 2013 HOURS: 25000h ELECTRIC POWER: 1860 kWe – 400V AC 50Hz PH 3 This equipment is properly stowed and ready to load. SCOPE OF SUPPLY The following are integral parts of the generators and groups necessary for their implementation (gas input, power output): GENERATOR: Jenbacher Model: J616 GS C02| 2000 kW| Year 2013, total hours of operation: 25000 h (15000 hours after the complete revision carried out in 2013). Alternator STAMFORD/ 1860 Kw 690V | | 50Hz 400 V AC Phase 3. Generator (alternator, motor and PLC motor) Control Panel Generator (DIANE Blue) Gas train Y- exhaust gas pipe Technical documentation of the equipment Service history: The maintenance has been carried out by LA EMPRESA LONJAS TECNOLOGÍA SL according to the manufacturing instructions. You can find us on Whatsapp: +34 611457522 Email: Sales@eurogensets.com

JENBACHER MOD. J612 GS C02 YEAR: 1998 HOURS: 55000h ELECTRICAL POWER: 1472 kW - 400V AC 50Hz The equipment is stowed and ready to load. SCOPE OF SUPPLY: The following are integral parts of the generators and groups necessary for their commissioning (gas input, power output): GENSET: Engine JENBACHER J612 GS C02/ 1472 kWe Year 1998, Operating hours: 55000h. Alternator STAMFORD / 1840 kVA - 1472 kW- 400V AC 50HZ Generator (alternator, motor and motor PLC) Generator Control Panels (DIANE XT) Auxiliary control panels Low voltage switch Gas train Silencer Pumps Technical documentation. You can find us on Whatsapp: +34 611457522 Email: Sales@eurogensets.com

Engine Make MTU Engine Type 20V4000 Power KW 2000 KW Power Output 1950 KW RPM 1500 Fuel Natural gas Volts 6600 Hz 50 Year of Manufacturing 2010 Running Hours 44.451 GAS POWER HOLLAND

Engine Make Jenbacher Engine Type JGS 620 GS Power KW/RPM 3044/1500 Fuel Natural gas Generator Voltage 10500 V Hz 50 Year of Manufacturing 2011 Running Hours 42666 30k service done at 32.000 hours GAS POWER HOLLAND 00316 38 63 90 71 whatsapp

JENBACHER JMS420GS-B.L Biogas Generator Set Model: JMS420GS-B.L Fuel: Biogas Year: 2012 Hours: 60,500 Capacity: 1500 kW HZ: 50 Voltage: 400 V Scope of supply: Complete generator set including Engine, Alternator, Frame, Control system (XT3 control), Gas line, Heat exchanger and other accessories. Service History Status: Rebuild in April/May 2022, cost €160,000. Replaced: piston lining, heads, and everything else common to rebuild. Not replaced: pistons, connecting rods, still within good range. Available for Sale Now. Price: €140,000

Gas Engine Generator Set (CHP/BHKW) MAN for natural gas Model E2866E 95 kWe Spec number 524806 Serial number 27093890484901 Stamford generator UC1274E2 400V/50Hz, 140 KVa 202 Amp year 2000 Serial number 0117910/02 Scope of delivery: - Generator set - Control panel

Gas Engine Generator Set (CHP/BHKW) Waukesha for natural gas Model H24GLD 330kWe Serial number 80371/01 Stamford generator HC1534C2 400V/50Hz, 500 KVa 721 Amp year 2005 Serial number C145320 Scope of delivery: - Generator set - Control panel - Gasline section as displayed - Exhaust gas cooler as displayed

Gas Engine Generator Set (CHP/BHKW) Waukesha for natural gas Model H24GLD Serial number 60468/01 Stamford generator HC1534E2 400V/50Hz, 600 KVa 866 Amp year 1996 Serial number C72199/04 Scope of delivery: - Generator set - Control panel - Gasline section as displayed - Exhaust gas cooler as displayed