stroke: 70 mm work height max.: 1094 mm throat: 500 mm : 40 in 14 mm no. of strokes: 20 Hub/min throat: 500 mm : 80 to engine output: 9 kW range L-W-H: 1980x1150x2000 mm weight: 2000 kg Accessories / equipment: - punching table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
puncher: 55.0 t round bar steel: 40.0 mm square edge steel: 40.0 x 40.0 mm L-beam: 120 x 120 x 10 mm hole punching press: capacity (dia. x thick.): Ø 40.0 x 10.0 mm shear: flat material: 300 x 15 / 200 x 20 mm total power requirement: 3.0 kW weight: 1320 kg range L-W-H: 1600 x 800 x 1680 mm good condition - barely used () current new price approx. 18.600 euros Special price on request Furnishing: - electro-hydraulic profile steel shear with 4 work stations Flat steel scissors Profile steel scissors Hole punch Notching station - electrical contact length stop - continuous stroke adjustment - Support table at hole punching & notching station including sliding stops - 2x freely movable foot switches - Material scraper - side storage options - various accessories - Emergency stop button - Connection cable including 16A plug - Operation manual Machine link: https://mhp.logotech.de/h ...
Sheet thickness: 20,0 mm Bar diameter: 28 mm Punching size: 130 mm (1) hydraulic / (2) mechanical: 1 Stroke adjustable: 80mm Punching force: 70T Capacity Ø x thickness:28 x 20mm Table Length: 800mm Table Width: 500mm Throat: 300mm Capacity L profile: 130 x 130 x 13mm Number of strokes: 40Min. Power: 7.5kW Length: 2000mm Width: 1200mm Height: 2000mm Weight: 1800kg
Shearing capacity: 40 mm Nibbling capacity: 0 mm Punching capacity: 0 t Make: GEKA Type: Hydracrop 80 SD YOP: 2010 Large package tooling 5 Working stations 2 Foot switches Stroke adjustable: 70mm Punching force: 80T Capacity Ø x thickness:40 x 20 mm Cutting force: 150T Throat: 500mm Capacity L profile: 130 x 130 x 13 mm Power: 9kW Length: 2.200 mm Width: 1.200 mm Height: 2.200 mm Weight: 2.800 kg
Following the closure of our manufacturing plant, we are selling our 2020 GEKA Punching Machine: - FLIP STOP device - Additional module with 8 stops and 2 feet - 6 additional stops
IRON WORKER (Universal Punching Shear) (Punching capacity) Punching capacity 70 Tons Diameter 28 x 20mm Thickness (Diameter 28 x 20mm thickness) Max cutting thickness in plate 20mm (Max cutting thickness in plate 20mm) Angle cutting up to 130x130x130x13 at 90°. Angle cutting up to 70x70x7 at 45°.
Geka Hydracrop 110/SD punching machine Selling due to need for space Ask us for anything
Motor power - 5.5 kW Number of actuator strokes/min. - 32 mm Net weight - 1750 kg Dimensions - 2.01x1.4x2.06 m Cutting flat bars: Flat bars max - 350 x 15 mm Flat bars (with 5º deformation) - 350 x 15 mm Knife length - 356 mm Cutting the angle at an angle of 45º max - 70x70x7 mm Station working height -859 mm Cutting angles and flat bars: L at an angle of 90º - 120x120x10 mm Round bars ø - 45 mm Square bars - 40 mm Punching holes: Punching force - 600 kN Max diameter x thickness ø - 40 x 11 mm Throat depth - 500 mm Working height of the station - 1106 mm Press for bending flat bars: Max width x thickness - 150 x 10 mm The machine has: Monolithic frame with the possibility of attaching accessories Pedal for performing electrical operations 5 workstations and 2 adjustable hydraulic cylinders: 1 - controls the work of the punching section, while the ...
Punching section equipped with CNC stop table with 3-fold punching head Rear equipped with NC push-on roller conveyor for the cutting section with feed belt Complete machine in very good condition, selling due to staff shortage
Year of manufacture: 1994 Power: 100 Tons Punching capacity: ø 50 x 15 mm Max punching ø: 90 mm 3 punching heads Gooseneck depth: 750 mm CNC table: 1500 x 750mm Tools User Manual
Combined profiled steel shears and hole punch GEKA type HYD 80 / Hydracrop 80/A Masch. No. 9566 Year of manufacture approx. 2000 Punching force 80 ton. Projection 300 mm Punching up to 40 mm in 14 mm sheet metal Flat material shears 450 x 15 mm Angle steel shears 130 x 130 x 13 mm 4-point shears 45 x 45 mm Round material shears 45 mm Rectangular notchers up to 12 mm Motor power 5.5 kW Mains connection 400 Volt, 50 Hz stop with el. Lifting release 500 mm - Work table with stop for the hole device 550 x 380 mm - Working height of the hole device 1100 mm - Work table with stop for the rectangular notcher 550 x 400 mm - Working height rectangular notcher 930 mm - Approx. 21 pieces of various punching tools - Operating instructions - Original painting, not repainted Space requirement L x W x H 1800 x 1150 x 1950 mm Weight 1.7 ton. very good condition; used
punching force 55 tons; Punching tool included
Description: Punching power 80 t , Maximum capacity 40×14 mm , Throat S / SD 510 / 750 mm , Working height S / SD 1094 / 1194 mm , GENERAL SPECIFICATIONS , Motor power 9 kw , Strokes/minute with 20 mm Stroke 40 Maximum , Stroke 70 mm weight approx.: 1,400 kg, Approx. Onsite Dimension. (l x w x h): 4,200 x 1,600 x 3,000 mm
Description: Triple punch 80 tonne punching power Standard gooseneck (S) 500mm Additional gooseneck (SD) 750 Steel punching capacity 42 kg/mm2 mm Ø 40 x 14 Ø 24 x 24 Punching U and I flanges 100 - 300 mm Core punching U 120 - 380 mm Core punching I 100 - 500 mm Adjustable stroke for shearing and punching stations 0 to 70 mm Punching device Gd. Ø (Option) mm Ø 100 x 6 / 50 x 12 Includes : Punching machine. Automatic X & Y positioning table without clamps. Triple punching device 31 - 40 - 31. Fitted with a Fagor 102 S control. Servomotor mobility group, independent for each axis, controlled by encoder weight approx.: 2,100 kg, Approx. Onsite Dimension. (l x w x h): 2,500 x 1,300 x 2,150 mm
Description: Shears for irons: 300 x 15 mm flats: 200 x 20 mm Punching: Ø 40 x 10 mm AND Ø 20 x 20 mm. Shears for l profiles at 90 º : 120 x 120 x 10 mm Shear for bars: Ø 40 mm Y □ 40 mm Rectangular shear: 90 x 42 x 10 mm Versatile, economical punching shear with 2 independent hydraulic cylinders, 2 stations and 5 workstations: - Punching (550 kn power) - Notching - Shears for l sections (1100 kn power) - Shear for flat bars - Shear for round Ø and □ square bars - Machines operated by two cylinders. - 5 workstations equipped with tools for cutting l , ø and □ bars, rectangular notching and punching. - Quick punch change. - Flat-iron cutting table with adjustable guides. - 2 simultaneous work stations - Superior speed developed by a powerful hydraulic unit. - Special approximation equipment with reduced pressure and slow speed. - Large punching table with millimetre stops. - L ...
Description: Universal shear , Serial number 3251 Cutting capacities: - L at 90°: 100 x 12 mm - L at 45º: 70 x 7 mm - T at 90º: 100 x 75 x 10 mm Bar cutting capacity: - Round bar: 35 mm diameter - Square bar: 32 x 32 mm Punching capacity: Round punch: - Maximum in 13 mm thickness: 28 mm diameter. - Maximum in 10 mm thickness: 35 mm diameter - Maximum in 9 mm thickness: 40 mm diameter. Square punch: - Maximum in 11 mm thickness: 25 x 25 mm , - Maximum in 9 mm thickness: 32 x 32 mm , - Maximum in 6 mm thickness: 42 x 42 mm Rectangular punch: Maximum in 8 mm thickness: 50 x 12 mm Maximum punching cross-section: 1020 mm2 Lot 15 weight approx.: 1,200 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 700 x 2,100 mm
Sheet thickness: 20,0 mm Bar diameter: 28 mm Punching size: 130 mm (1) hydraulic / (2) mechanical: 1 Stroke adjustable: 80mm Punching force: 70T Capacity Ø x thickness:28 x 20mm Table Length: 800mm Table Width: 500mm Throat: 300mm Capacity L profile: 130 x 130 x 13mm Number of strokes: 40Min. Power: 7.5kW Length: 2000mm Width: 1200mm Height: 2000mm Weight: 1800kg