QUICK WASHER for RIGID and SOFT PLASTICS, made in AISI304 stainless steel, low water consumption, can be used with hot water or mild detergents, for reground LDPE LLDPE HDPE film, rigid PE PP PVC PET PA ABS PS PC, 7,5 kw motor 400V 50/60Hz, inner auger 400 mm diam., length 3.000 mm., material and water are loaded from the bottom, material discharging is done through a draining auger from top, bearings are positioned outside the wet chamber, seals on the lower bearing to exclude any contact with water, auger speed is adjustable to change throughput rate 500 to 1.000 kg/h, throughput rate can be adjusted according to contamination and material, Low water consumption (depending on contamination), The water can be mechanically filtered with a water screening system (available separately), electric cabinet, Users manuals , drawings, CE compliance
VERTICAL MIXER, 5.000 lt.capacity, total height approx 4.500 mm including transmission group, max Ø 1.800 mm., constructed in painted electro-welded carbon steel., inner auger diam.350 mm. lower loading hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600x500, pulley and belt transmission, protected by carters, inspection doors with safety limits, cleaning hinged door on bottom of cone for complete discharging, with safety opening, side discharging pipe to big bag with valve at 2.500 mm from ground, max electric level indicator, paddle type, automatic greasing kit, 7,5 kw drive, complete with control panel., electric voltage: 400 V, 50 Hz, auxiliaries a.c. 24 V, CE compliance and instruction manual, installed power : 7.5
VERTICAL MIXER 20 m3 capacity, total height approx 7.000 mm including transmission group (can be customized), max Ø 2.400 mm.(standard transport), constructed in painted electro-welded carbon steel., inner auger diam.350 mm., lower loading hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600x500, pulley and belt transmission, protected by carters, inspection doors with safety limits, cleaning hinged door with on bottom of cone for complete discharging, with safety opening, side discharging pipe to big bag with valve mm.at 2.500 mm from ground, max electric level indicator, paddle type, automatic lubricating kit, electric motor 15 kw, complete with control panel., electric voltage: 400 V, 50 Hz, auxiliaries a.c. 24 V, CE compliance, drawings and instructions manual in English., Possible additions: wheeled slide, feeding screw and hopper, extraction auger, b ...
CROSSED MIXING SYSTEM FOR PLASTIC MATERIALS, The system includes n.2 x 30.000 lt. (or bespoke) vertical mixers which fill each other through the endless screw conveyor., for each mixer :, total height approx 9.500 mm including transmission group, max diam. 2400 mm.(standard transport) - 2 x LKW for the whole system, constructed in painted electro-welded carbon steel., inner auger diam.350 mm., lower hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600×500, pulley and belt transmission, protected by carters, inspection doors with safety limits, cleaning hinged door with on bottom of cone for complete discharging, with safety opening, loading hopper with conveying screw, bottom discharging on the other mixer, side discharging pipe to big bag with valve mm.at 2.500 mm from ground, electric level indicator, paddle type, electric motor 22 kw, complete with cont ...
Our VERTICAL MIXER 5 to 30 m3 are used to blend different batches of one material and grant a more homogeneous quality within one lot., Please see our attached [PDF](https://drive.google/file/d/1kQKOuxvrbrpfSZBrVxh2jrXbJ7StrQMp/vi ew?usp=drive_link) and photos for different sizes availables., Another important task they are used for, is to complete cooling of materials after a heat related process, like regranulation or agglomeration, in order to avoid the possibility that materials, due to residual heat, clog into lumps., Our standard mixers for plastic materials are constructed in sturdy electro-welded steel, painted on the outer surface with an anti-rust layer and a protection coating. Installed in a sheltered, dry place they will perform at their best for years ., - inner auger diam.350 mm., - lower loading hopper with safety grid and sampling shutter, complete with anti-dust cover, ...
GUILLOTINE REEL SPLITTER 50 T, Working width 2.500 mm, Working height 1.500 mm, Cutting force 2x25 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 50 T
GUILLOTINE REEL SLITTER, - These reel splitters are particularly recommended to reduce the size of scraps before a further recycling process. They are ideal for paper, plastic, fabric, rubber, polylaminated, AL foil, in the shape of REELS, BALES, LOOSE MATERIAL, FIBERS, and more., - Proposed in different standard dimensions and cutting forces, or bespoke to project, these machines feature a sturdy steel structure, top quality components and are constructed according to the strictest EU regulations to perform at their best and keep their value in the years with the simplest maintenance., - Sturdy and reliable, these guillotines give excellent performances even on lower tonnage, for paper and plastic film reels., - with increased speed system, our guillotines can double the work done, compared with other models., - One operator is needed to work in full safety conditions: 2-hands operation ...
OPTICAL SORTING UNIT, To sort different colors of PET HDPE PP PVC PC ABS PMMA and more, Customizable from 1 to 6 channels, High precision and smart technology which uses A.I.to grant excellent performances., The best cost-effective deal you can find to improve your final product or create a new business., Very quick assistance if needed, Compact and versatile machine, available from 0,940 .up to 2,7 mt. wide (L x H: 1,8 x 1,8 mt.), For a variety of different uses, this machine can separate parts as small as a salt grain and as large as a walnut so increasing the value of your reground plastic scraps ., The control panel with its touch screen allows full customisation on different materials and colors., The 16 million colors high resolution digital cameras gives extremely high performances and can recognize down to 0,09 mm.large defects., The NIR cameras allow to detect stone, glass, soil ...
VERTICAL MIXER, 8 m3 capacity, total height approx 4.500 mm including transmission group, max Ø 2.200 mm., constructed in painted electro-welded carbon steel., inner auger diam.350 mm. lower loading hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600x500, pulley and belt transmission, protected by carters, inspection doors with safety limits, cleaning hinged door on bottom of cone for complete discharging, with safety opening, side discharging pipe to big bag with valve at 2.500 mm from ground, max electric level indicator, paddle type, automatic greasing kit, 11 kw drive, complete with control panel., electric voltage: 400 V, 50 Hz, auxiliaries a.c. 24 V, CE compliance and instruction manual, installed power : 11
FOUR-SHAFT HYDRAULIC SHREDDER, Customised hopper, construction in robust high thickness carbon steel, shredding surface 1.800 x 1500 mm, 2 counter-rotating steel shafts with differentiated speed, Blades 30 mm, 4 + 2 teeth or bespoke, Very easy blade maintenance, welded profile connection frame, No. 2 gearboxes, Electric motors 2x37 + 2x55 kw - 400 V/50 Hz, bearings strategically positioned so as not to be affected by the processed material, the bearings are connected to a centralised lubrication point that can be connected (as an option) either to an automatic lubrication system or to a manual greasing point where the operator can intervene regularly., hydraulic control unit,, electrical control panel with PLC and machine wiring, automatic overload reversal with programmable number of reverse cycles, width: 1.300 mm, Power: 184 kw
FOUR-SHAFT HYDRAULIC SHREDDER, Customised hopper, construction in robust high thickness carbon steel, shredding surface 1.000 x 980 mm, 2 counter-rotating steel shafts with differentiated speed, Blades 30 mm, 4 + 2 teeth or bespoke, Very easy blade maintenance, welded profile connection frame, No. 2 gearboxes, Electric motors 2x11 + 2x15 kw - 400 V/50 Hz, bearings strategically positioned so as not to be affected by the processed material, the bearings are connected to a centralised lubrication point that can be connected (as an option) either to an automatic lubrication system or to a manual greasing point where the operator can intervene regularly., hydraulic control unit,, electrical control panel with PLC and machine wiring, automatic overload reversal with programmable number of reverse cycles, width: 1.000 mm, Power: 52 kw
FOUR-SHAFT HYDRAULIC SHREDDER, Customised hopper, construction in robust high thickness carbon steel, shredding surface 1.300 x 1100 mm, 2 counter-rotating steel shafts with differentiated speed, Blades 30 mm, 4 + 2 teeth or bespoke, Very easy blade maintenance, welded profile connection frame, No. 2 gearboxes, Electric motors 2x22 + 2x30 kw - 400 V/50 Hz, bearings strategically positioned so as not to be affected by the processed material, the bearings are connected to a centralised lubrication point that can be connected (as an option) either to an automatic lubrication system or to a manual greasing point where the operator can intervene regularly., hydraulic control unit,, electrical control panel with PLC and machine wiring, automatic overload reversal with programmable number of reverse cycles, width: 1.300 mm, Power: 52 kw
QUICK WASHER for RIGID and SOFT PLASTICS, made in AISI304 stainless steel, low water consumption, can be used with hot water or mild detergents, for reground LDPE LLDPE HDPE film, rigid PE PP PVC PET PA ABS PS PC, 7,5 kw motor 400V 50/60Hz, inner auger 400 mm diam., length 3.000 mm., material and water are loaded from the bottom, material discharging is done through a draining auger from top, bearings are positioned outside the wet chamber, seals on the lower bearing to exclude any contact with water, auger speed (and throughput rate) can be adjustable to change throughput rate 500 to 1.000 kg/h, by adding an inverter, Low water consumption (depending on contamination), The water can be mechanically filtered with a [water screening system](https://www.germanplast.eu/listings/5003567-germanplast-vibrat ing-screen-round-type) (available separately), This machine is to be electrically conne ...