used graf pelletizing presses

Graf Kollerhülsen Geriffelt to CPM Pelletpress

Graf Koller sleeves punched for CPM 16-2.5 Pelletier press

Koller sleeves Geriffelt for CPM 22-2.5

Koller sleeves punched for CPM 22-2.5

Pellet mill for ring DIE and two roll shell system. Inside diameter: 900 mm Active operating width: 138mm Active forming area: 3902 cm² Press roll Ø440/142 optionally dimpled or notched Front door Stainless steel front door with large opening angle. pneumatic operated overload bypass protection gate. Two knives with step less length adjustments integrated in the door. Machine housing All housing parts are cut by precision laser. The machine base, the base plate and the housing are welded and reinforced. Drive Drive via 355 kW-1200 rpm engine , timing belt Ø200/1900 - Beltdrive Motor and Motor cables not included. Equipment Central lubrication for roll assembly and main shaft Manual roll adjustment Overload protection provided by a safety pin Die of chrome steel X46 Cr13 with conical seat for an easy change of the die - Die is not included Adjustable defle ...

; ready for use

; ready for operation

; ready for use

; ready for use

; ready for use

; ready for use

; ready for use

; ready for use

; ready for use

; ready for use

Control: HEIDENHAIN TNC 415 Operating hours: 15285 Technical data Table length: 1300 mm Table width: 700 mm Table load max.: 2500 kg Longitudinal travel (X-axis): 1200 mm Transversal travel (y axis): 600 mm Vertical travel (z axis): 600 mm Execution: universal milling head Taper in spindle: 40 ISO Spindle speeds: from: 20 rpm up to: 3150 rpm Feeds: longitudinal from: 1 mm/min up to: 4000 mm/min transversal from: 1 mm/min up to: 4000 mm/min vertical from: 1 mm/min up to: 4000 mm/min Rapid traverse: all axis: 8 m/min Voltage 50 Hz 3x: 380 Volt Milling spindle motor: 11.2 kW Total power required: 40 kVA Machine´s weight about: 8800 kg Overall dimensions machine: Length: 3700 mm Width: 3525 mm Various accessories: Coolant system Chip conveyor Lamp

- Three mobile knives units for additional knife fold - Can be used on combi or buckle folders for various configurations ( Mbo, Stahl, etc. )

Pressure plate intermediate table Grafoteam MDT 260 C; condition overhauled; 2 pieces available; Arm length 780mm; Max. Plate size 780x820mm. Plate conveyor Grafoteam MDT 260 C; condition rebuilt; 2 pic. on stock; arm lenght 780mm; max.plate size 780x820mm.

Plate stackers Grafoteam PST Advand 26 year: 2010 Located Germany Available: now Price: on request

spindle diameter: 130 mm y-travel: 265 mm x-travel: mm total power requirement: kW weight of the machine ca.: 3 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Printing plate deal Grafoteam TAT 48; good condition; we overhaul before delivery; Max. Plate format 1630x1300mm, min.510x400mm; Interface connection possible. Turn around table Grafoteam TAT 48; good condition; will be rebuilt before shipping; max.plate size 1630x1300mm, min.510x400mm; possible to connect with other machine.

Printing plate transport system Grafoteam MDT 36 TW; will be overhauled before delivery; right or left display; Max. Plate size 880x660mm; Color sensor. Printing plate conveying system Grafoteam MDT 36 TW; will be rebuilt before shipping; delivery to right or left side; max.plate size 880x660mm; color sensor.

Description: Graflex boring head on SK40 taper Approx. Onsite Dimension. (l x w x h): 200 x 200 x 200 mm, weight approx.: 5 kg

Pressure plate stacker Grafoteam PST 26; good condition; cleaned and tested; new engine; .max. Panel size 820x780mm, min.324x394mm. Plate stacker Grafoteam PST 26; good condition; cleaned and checked; New Arm Motor; Max.plate size 820x780mm, min.324x394mm.

Pressure plate stacker Grafoteam PST 26 C 580; condition outdated; .max. Panel size 580x820mm, min.240x240mm; Speed adjustable; Height adjustable. Plate stacker Grafoteam PST 26 C 580; codition rebuilt; max.plate size 580x820mm, min.240x240mm; adjustable in speed; adjustable in hight.