used göckel surface grinding machines

Inv. Num. : 7462 Type: G130 Producer: Göckel Created: 1987 Parameters: Control system: Sinumerik 810 Table length: 7500 mm Table width: 1000 mm Machine height: 3500 mm Machine length: 15000 mm Machine width: 3500 mm Machine weight: 45000 kg Equipment: 500 ceramic and 500 bakelite grinding segments 2016: Conversion of the control system to Sinumerik 810

Göckel G 80 Surface grinding machine Magnet size 3100x400 mm, estimated machine dimensions 8x2x3 meters, estimated weight 14 tons.

The machine is in good technical condition, it is possible to test it by agreement. magnet 2500x600 mm, estimated dimensions of the machine 7x2.3x3 meters, estimated weight 14 tons. Maximum workpiece dimensions: 600 x 300 x 6500 mm.

Magnet size 7500x1000 mm, estimated machine dimensions 15x3.5x3.5 meters, estimated weight 45 tons, approximately in 2016 control system converted to Sinumerik 810, good, fully operational condition, sale including approximately 500 ceramic and 500 bakelite grinding segments.

No. 3464: 1 gebr. Universal flat - and knife grinding machine Fabr. G�CKEL, type G 100 EL SP, b. 1989 with ARB.-ber.: 2000 x 700 x 520 / 250 mm, power: 7,5 kW Accessories: 2 magnetic disks: 2000 x 600 mm 2000 x 250 mm swivel and cross in y axis can be moved; 2 grinding spindles for forehead and size sanding Coolant reservoir other: grinding spindle power: 7,5 kW Grinding spindle speed: 1500 rpm Slip ring: 250 mm Grinding spindle, swivel: + 20 ° (+ 25 °) Grinding head speed: 0.02-30 m / min Rapid traverse speed support: 450 mm / min Extra steps: 0.003 - 0.2 mm Cooling water pump: 1 x 160 l/min Rinsing pump: 1 x 100 l/min Magnetic Chuck rotating 360° width 250 mm Lateral adjustment: 450 mm Space requirement approx. 7,2 x 2,70 x 2.60 m Weight: CA. 15 tons.

1 Gebr. Göckel knife sharpening machine G40el for chipper knives, chipper knives and planing knives with magnet 1300 x 150 mm Grinding motor: 5.5 kW Coolant tank with pump Mounts for slip rings d = 200 mm and d = 175 mm 1 holder for diamond grinding cups d = 200 mm 4 different stop rulers Switchboard Space requirement: approx. 2500 x 1300 x 1300 mm

Knife sharpening machine. Sharpening machine for planing knives Manufacturer: Göckel Model No.: G40eL Magnetic table dimensions: 950mm x 150 mm

Manufacturer: Göckel Type: G65PL Stock number: 1016 Magnetic table clamping surface: 2000 x 375 mm Grinding spindle speed: 420 - 2900 rpm Grinding speed: 13 - 27.5 m/s Grinding wheel diameter: 150 - 730 mm Control: Siemens Power: 36 kW

centre distance: 2000 mm max. swing diameter: 650 mm weight of the machine ca.: 5 t Year: ca. 1999 : Rundmaterial : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight: 4 t swing diameter: 650 mm centre distance: 3500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight: 4 t swing diameter: 650 mm centre distance: 3500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight: 4 t swing diameter: 650 mm centre distance: 3500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Surface reference plates, roughness measures, 8 pieces MASSI surface grinding TGL 0-4763, DIN4763 Rz = 0.63 μm, Rz = 1.6 μm, Rz = 3.2 μm Drehen TGL 0-4763, DIN4763 Rz = 1.6 μm, Rz = 3.2 μm, Rz = 6.3 μm, Rz = 10 μm, Rz = 20 μm im Holzkasten used, tested ! Dimensions: 225 x 120 x 40 mm

Description the grey cast iron machine frame convinces with stability and torsion alimness, precise guides and excellent workmanship all guideways are reliably supplied with lubricant by an automatic central lubrication the working area is protected by an easily accessible enclosure the high-performance coolant pump is combined with the suction unit and binds the resulting grinding dust and aerosol during processing Grinding spindle the grinding spindle is large in size, dynamically balanced, completely sealed and permanently lubricated Prestressed precision bearings enable maximum grinding performance and reliability for many production hours Programming the high-quality ball-circuit spindle and the powerful servo motor guarantee precision and repeatability of positioning in the Y-axis for set-up work and for the manual process of the grinding spindle, th ...

Code 0776 Description Surface grinding machine Make ELB Type SWBD 030 MCNC82 Machine No. 18.346.0383 Manufacturing date 1983 Control MCNC / 82-PC Tablesize 3520 x 600 mm Table grinding size L x B x H 3000 x 600 x 600 mm Magnetical plate size L x B 3000 x 400 mm Speed table movement 0,2 – 6 m/min. Max. distance table – centre grinding wheel 850 mm Speeds vertical 3 – 375 mm/min. Speeds cross 1,2 m/min. Speeds grindingwheel stepless 750 – 1400 omw/min Grindingstone: Ø 600 x Wide:100 x Bore: 200 mm Weight 18.000 kg Motor power 37 kW – 380 Volt Accessoiries Electro table 3000 x 400 mm Grinding unit with water cooling Filtering unit with paperfilter Profile grinding unit Condition Machine is in very good condition

GER RS-12/50 surface grinding machine. Grinding area: 1200x550mm. Distance table-centre of spindle: 625mm. Table speed: 2 to 25m/min. Maximum table travel: 1250mm. Maximum work weight: 1200Kgs. Maximum cross travel: 500mm. Grinding wheel size: 400x80x127mm. Manual diamond grinder. Vertical orientable headstock. Vertical automatic feed. Power of grinding spindle: 12,5cv. Weight: 4500Kgs.

Back grinder for JUNG surface grinding machines, etc. Operating voltage: 24 volts. Magnetic plate: 110 x 75 mm. Angle adjustment: 0 - 2 degrees. Dimensions: 500 x 200 x 125 mm high. In original JUNG wooden cassette, Tools and operating instructions. Weight: approx. 25 kg. Shipping with DHL possible in consultation. Visually, good little used condition. The device can be visited in consultation and is immediately available. Please also note my other entries.

CNC flat and profile grinding machine Control: CNC SINUMERIK 840 D workpiece size 800 x 400 x 360 mm Table load: 500 kg Grinding wheel dimensions: 500 x 203 x 80 mm Spindle speed: 600 - 2000 rpm Total power requirement: 62 KW Dimensions: 6.2 x 2.8 x 2.78 m Machine weight: 7,100 kg

General: Year of construction 2019 Spindle speed 1,450 rpm Travel speed table 5 – 25 m/min Largest grinding wheel 355 x 38 x 127 mm Distance spindle – table max. 500 mm Clamping surface 300 x 600 mm Automatic feed control AD5

General: Year of construction 2019 Spindle speed 1,450 rpm Clamping surface 300 x 600 mm Largest grinding wheel 355 x 38 x 127 mm Travel speed table 5 – 25 m/min Distance between spindle and table 500 mm Weight 1.700 kg Other equipment and accessories included: Automatic feed control AD5 Coolant device Hydraulic

CNC flat and profile grinding machine, horizontal grinding spindle LSCH-220 Control: CNC SINUMERIK 840 D workpiece size 800 x 400 x 360 mm Table load: 500 kg Grinding wheel dimensions: 500 x 203 x 80 mm Spindle speed: 600 - 2000 rpm Total power requirement: 62 KW Dimensions: 6.2 x 2.8 x 2.78 m Machine weight: 7.100 kg

NC – controlled precision rotary table face grinding machine with vertical grinding spindle and cup grinding wheel - brand new Rotary table diameter 400 mm Largest grindable diameter 400 mm Rotary table speeds 0 to 50 rpm infinitely variable Maximum workpiece weight 75 kg Cup grinding wheel Ø 200 mm x H 80 mm Grinding wheel speed 280 to 2,800 rpm infinitely variable Maximum workpiece height 170 mm Smallest programmable infeed dimension of the grinding wheel 0.001 mm Grinding wheel drive power 3 kW Rotary table drive power 0.5 kW Weight approx. 650 kg

Grinding surface 600 mm x 250 mm Table surface 600 mm x 200 mm Distance between the table surface and the grinding spindle max. 550 mm Max. table load 200 kg Grinding spindle speed at 50 Hz 2,800 rpm Drive power of the grinding wheel 2.2 kW

- Grinding width: 200 mm - Magnetic table: 500 x 200 mm - Dressing device: yes - Coolant device: yes - Automatic infeed: no - Machine weight: 1850 kg - Dimensions (W x D x H): 1.8 x 1.5 x 2.2 m m - Condition: good, immediately ready for use Accessories without documentation, machine feet

GENERAL Project No.: 905610 Quantity: 1 pcs. Manufacturer: MÄGERLE Type: MGC Grinding Centre Control: Siemens 840 D solutionline Year of construction: 2020 Conservation status: Used machine Machine on approx. (hrs): 2.124 Program run approx. (hours): 155 Spindle on approx. (hrs): 214 DESCRIPTION GRINDING Travel in X 1300 mm Travel in Y 450 mm Travel in Z 350 mm Max. rapid traverse speed in X/Y/Z 20/10/10 m/min Max. distance table spindle center 850 mm Automatic balancing device Motor spindle Max. diameter x width x bore grinding wheel 500x160x203.2 mm Max. circumferential speed 63 m/s2 Max. speed 5000 1/min Max. power at ED 10-40/100% 50 kW Workpiece table with T-slots and 16-fold oil feed-through (shuttle table) 2x 760×325 mm Clamping hydraulics Hydrostatic guidance Forming roll dresser MT 200 D200 B167 OTHER EQUIPMENT Splash guard cladding wit ...