used HAAS for sale

HAAS CNC milling machine - Spindle speed: 1800 rpm - Spindle motor power: 5.6 kW - Total weight: approx. 2t - maximum turning length: 762 mm - maximum turning diameter: 406 mm - from a training center with a few hours Good condition fully functional can be visited and tried on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article, in order to avoid misunderstandings, can be viewed before buying and tested under electricity. Please ask questions before purchasing to avoid ambiguity. For general questions or an appointment for a visit, I am always available at the telephone number below or above. Errors in description and prior sale excepted. VAT will be shown separately on my invoices. Shipping with freight forwarder.

Quality unchecked.

Quality unchecked.

Quality unchecked.

10 station automatic tool changer, suitable for BT and CT tool holders,

Description: Serial number 1071497 , Including measuring probe, as well as clamping cube and existing documentation Attention, technical specifications without guarantee! Attention, the transport width after disassembly will be less than 3000 mm. z-motion: 762 mm, max. workpiece weight between centers: 1,814 kg, x-motion: 1,626 mm, y-motion: 1,016 mm, control: HAAS, table surface area l x w : 1626x914 mm, taper: BT40, toolchanger positions: 24, power capacity - spindle: 22,4 kW, turning speed range: 8,000 rpm, weight approx.: 10,000 kg, Approx. Onsite Dimension. (l x w x h): 4,000 x 3,700 x 3,300 mm

Description: Serial number 26675 , Including: measuring probe existing documentation Attention, technical specifications without guarantee! z-motion: 506 mm, x-motion: 762 mm, y-motion: 406 mm, control: HAAS, table surface area l x w : 915x355 mm, taper: SK40, toolchanger positions: 20, turning speed range: 7,500 rpm, weight approx.: 5,000 kg, Approx. Onsite Dimension. (l x w x h): 3,000 x 2,400 x 2,700 mm

Description: Round table diameter approx. 180 mm Approx. Onsite Dimension. (l x w x h): 800 x 600 x 500 mm, weight approx.: 60 kg

Description: maximum bar diameter: 51 mm Including: bar feeder, manufacturer HAAS, type HAAS BARFEEDER, year of manufacture 2017, serial number 95741 3-jaw chuck foot switch chip conveyor coolant preparation existing documentation turning diameter: 806 mm, Drehlänge: 533 mm, serial number: 3,109,217, turning diameter over slide: 527 mm, x-motion: 236 mm, y-motion: +/- 51 mm, z-motion: 533 mm, control: HAAS, spindle bore: 88,9 mm, weight approx.: 6,000 kg, Approx. Onsite Dimension. (l x w x h): 6,000 x 2,000 x 1,800 mm

Description: Serial number 3083947 turning diameter: 400 mm, Drehlänge: 1,200 mm, turning diameter over slide: 280 mm, spindle bore: 76 mm, turning speed range: 2,000 rpm, Approx. Onsite Dimension. (l x w x h): 3,200 x 1,900 x 2,100 mm, weight approx.: 2,000 kg

Description: Attention: cooling units must be checked, probably defective Approx. Onsite Dimension. (l x w x h): 3,900 x 800 x 1,700 mm, weight approx.: 850 kg

Description: Serial number 162331 Including one additional 4-jaw chuck, one tailstock and clamping device weight approx.: 200 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 400 x 400 mm

Description: Capacities , Chuck Size 305 mm , Max Cutting Diameter ,533 mm , Max Cutting Length 660 mm , Std. Bar Capacity 102 mm , Spindle Nose A2-8 , Spindle Bore Ø117,3 , Spindle , Max Speed 3200 rpm , Max Motor Rating 29,8 kW , Max Torque 576 Nm @ 325 rpm , Drive System belt drive , Swing Diameter , Over Front Apron 806 mm , Over Cross Slide 527 mm , Over Tailstock 584 mm , Travels & Feedrates X Axis 318 mm , Y Axis -- Z Axis 660 mm , X-Axis Max Thrust 18 238 N , Y-Axis Max Thrust -- Z-Axis Max Thrust 22 686 N , X-Axis Rapids 24,0 m/min , Y-Axis Rapids -- , Z-Axis Rapids 24,0 m/min , Operating Dimensions ST-35 Max Operating Height 2108 mm Max Operating Width 4 521 mm Max Operating Depth 3 048 mm serial number: 3,113,825, x-motion: 318 mm, z-motion: ...

Description: Motor SIEMENS 220/380 V, 0.55 kW, 2770 rpm Magnetic plate 00110-15 B 3, approx. 250 x 150 mm max. grinding wheel diameter 180 mm weight approx.: 150 kg, Approx. Onsite Dimension. (l x w x h): 1,000 x 900 x 1,600 mm

Description: Serial number: 2786 Control: SIEMENS SINUMERIK 840D/additional program 'Sequence list' Technical data (without guarantee): Travel distances: X-axis: 400 mm Y-axis: 270 mm Z-axis: 250 mm A-axis (dividing head): 360° C-axis (spindle axis) Tool changer: Number of tools: 4 Grinding spindle: HSK 50/12 kW max./8000 rpm Incl. ram handling Incl. the tool clamping device (SK 50 holder) which can be seen in the last pictures Important note: without centrifuge and oil tank Coolant system not included in the scope of sale and delivery Also without the clamping device for workpieces shown in the photos and videos weight approx.: 7,500 kg, Approx. Onsite Dimension. (l x w x h): 2,350 x 1,750 x 2,800 mm

Description: Serial number 1147287 Including the tool holders and tools located on the tool changer, as well as a measuring probe Attention: The tool holders on the shelf and the machine vices attached to the table are not included in the scope of delivery! z-motion: 635 mm, x-motion: 1,270 mm, y-motion: 508 mm, control: HAAS, table surface area l x w : 1320x480 mm, taper: BT 40, toolchanger positions: 20, turning speed range: 8,000 rpm, weight approx.: 5,000 kg, Approx. Onsite Dimension. (l x w x h): 3,700 x 2,800 x 3,000 mm

Description: Serial number 24636 , Including the tool holders and tools located on the tool changer. Attention, the machine vices attached to the table are not included in the scope of delivery! z-motion: 635 mm, max. workpiece weight between centers: 1,588 kg, x-motion: 1,016 mm, y-motion: 508 mm, control: HAAS, table surface area l x w : 1219x457 mm, taper: BT 40, toolchanger positions: 20, turning speed range: 7,500 rpm, feed range: 0 -16500 mm/min, rapid motion: 25,4 m/min, weight approx.: 5,000 kg, Approx. Onsite Dimension. (l x w x h): 3,700 x 2,800 x 3,000 mm

Description: Serial number 28133 , Diameter of the rotary table 250 mm ,  , Including fully integrated swivel rotary table, as well as the tool holders and tools located on the tool changer  , z-motion: 635 mm, x-motion: 1,270 mm, y-motion: 508 mm, control: HAAS, table surface area l x w : 1310x455 mm, taper: BT 40, toolchanger positions: 20, turning speed range: 8,000 rpm, weight approx.: 4,000 kg, Approx. Onsite Dimension. (l x w x h): 3,700 x 2,800 x 3,000 mm

Description: Length approx. 10 m Approx. Onsite Dimension. (l x w x h): 800 x 800 x 100 mm, weight approx.: 10 kg

Description: Serial Number 4362 Table Dimensions: 660x356 mm Control HAAS Travels: X:508 mm Y: 406 mm Z: 508 mm Speed: 7500rpm ATC 20 stations Taper: BT40 ENCODER NEED TO BE CHECKED  , weight approx.: 3,700 kg, Approx. Onsite Dimension. (l x w x h): 2,795 x 2,357 x 2,642 mm

Description: 'Specifications Character: HAAS Type: HS-2 Steering: HAAS Year of construction: 1999 Plate size: 500 x 500 mm Number of pallets: 2 X: 1,000 mm Y: 1,000 mm Z: 1,000 mm Top name spindle: BT 40 Positions in tool magazine: 40 Max. workpiece height: 1,000 mm Clamping transport Movable column Transport dimension: 4,400 x 3,100 x 3,100 mm Approx. Onsite Dimension. (l x w x h): 4,400 x 4,300 x 3,100 mm, weight approx.: 11,500 kg

travel -x axis: 762 mm travel -y axis: 305 mm travel -z axis: 406 mm control: Haas Milling machining centers - vertical | Haas - TM-1 HF The machine is in a well-maintained condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: TM1 HF | TM-1HF | TM1HF | TM-1-HF The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre height: 175 mm centre distance: 300 mm number of spindle speeds: 2.000 - 8.000 control: SIEMENS 840D machine weight ab.: 7.500 kg surface area: 1.000 x 270 mm number of T-slots: 3 groove width: 12 H7 mm flute distance: 50 mm spindle diameter in front bearing: 55 mm Tool and Cutter Grinder | HAAS - MULTIGRIND AF1 Additional equipment: - Tool laser measuring system: Blum - Lasersystem MINI-MICRP-NANO The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: AF 1 | AF-1 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 432 mm turning length: 864 mm control: HAAS spindle taper:: c-axis: bar capacity: 76 mm spindle turning speed - stepless: 30-3400 U/min Top turret tool hodler:: VDI40 weight of the machine ca.: 7.3 t dimensions of the machine ca.: 4.0x2.2x2.0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1016 mm y-travel: 508 mm z-travel: 635 mm control: Haas total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 762 mm y-travel: 508 mm z-travel: 508 mm control: Fanuc total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 457 mm turning length: 584 mm control: total power requirement: 22,4 kW weight of the machine ca.: 7,3 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Positions APC: 0   CNC Brand: 0 CNC Model: 0 Control: HAAS AUTOMATION Technical data Table length: 1219 mm Table width: 457 mm Table load max.: 794 kg Longitudinal travel (X-axis): 1016 mm Transversal travel (y-axis): 508 mm Vertical travel (z axis): 635 mm Pallets: number: 2 Tool changer: Number of tools: 40 Tool diameter max.: 64 mm Diameter with free adjacent pockets: 127 mm Tool lenght: 330 mm Max. tool-weight: 5.4 kg Time of tool changing: 2.8 sec Distance spindle nose to table: 742 mm Spindle speeds: stepless up to: 12000 rpm Work feed rate: 21.2 m/min Rapid traverse:: 35.6 m/min Air connect: 6 bar Voltage 50 Hz 3x: 400 Volt Spindle power: 22.4 kW Machine´s weight about: 6300 kg Various accessories: Coolant system: 208 l Tool setter Renishaw Pallets chanching device:

Table length: 630 mm Table width: 500 mm Longitudinal X: 762 mm Cross Y: 508 mm Vertical Z: 508 mm Positions ATC: 30   Positions APC: 0   CNC Brand: Haas 5-axis CNC machine (VMC)Haas - UMC-750 MACH-ID 8501 Make: Haas Type: UMC-750 Control: HAAS Year: 2019 Length:3048mm Width:4115mm Height:2870mm Weight:8400kg

Table length: 1270 mm Table width: 500 mm Longitudinal X: 1270 mm Cross Y: 508 mm Vertical Z: 635 mm CNC Brand: Haas X - Travel:     1270mm Y - Travel:     508mm Z - Travel:     635mm Table Length:   1320mm Table Width:    500mm Table load:     800 Feed rate X-Axis:20000mm/min. Feed rate Y-Axis:20000mm/min. Feed rate Z-Axis:20000mm/min. Spindle Taper:  40ISO/Bt/Mk Power on spindle:15kW Speeds / ranges:10000Rpm ATC / revolver: 24 Length:         3500mm Width:          2500mm Height:         2800mm Weight:         5500kg

Number of axes: 5, x-axis: 400mm, y-axis: 270mm, z-axis: 250mm, A-axis: 360°, speed: 8000/min, control: Siemens Sinumerik 840D, tool holder HSK 50, max. spindle power: 12kW, connected load: 25kVA, length: 2680mm, width: 2400mm, height: 2800mm, weight: 7.5t, operating hours: 78,285h, with extraction system, extinguishing system, tool changer, automation, double gripper, software and documentation, without coolant system, an on-site inspection is possible.

Connected load: 6.5kW.

Motor power: 55kW, length: 14,900mm, width: 6800mm, height: 4000mm, operational hours counter: 30h.

Length: 2600mm, width: 1700mm, height: 1800mm, connected load: approx. 12.5kW, on-site inspection is possible.

CONTROLS   CNC controls SIEMENS 840 D SL TECHNISCHE DATEN   .. max.: 18000 /min   .. to: 30000 m/min   .. to: 30000 m/min WORKING RANGE -CUBIC-   number of processing axes (excl parallel axes): 5   X-axis travel: 630 mm   Y-axis travel: 465 mm   Z-axis travel: 630 mm   rotating range C-axis from: 70 °   rotating range C-axis up to: -250 ° ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz X,Y,Z linear axes CU Gentry A Rotation axis SK50 n=1000 1/min C axis = -70 +250 Equipment: - Robot automation CU Fanuc M-10iA - Workpiece - Renishaw MP250 probe - Tool - Renishaw LP2 probe - Dittel balancing system P6001 - Dittel structure-borne sound system DM6000 - Haas-CU, including automation - Haas robot cell CU - Siemens 840 DSL handheld contro ...

This HAAS UMC-500 Universal Machining center was manufactured in the year 2020 in the United States. It is equipped with a HAAS control unit and has 5 axis. The machine has a spindle speed of 15000 rpm.

This HAAS VF-3YT/50 Vertical Machining centre was manufactured in the year 2017 in the United States and has 238 production hours. It is equipped with a HAAS control unit and has 3 axis. The machine has a spindle speed of 12000 rpm.

This HAAS DS-30SSY Lathe was manufactured in the year 2017 in the United States. It is equipped with a HAAS control unit and has 3 axis. The machine has a spindle speed of 4800 rpm.

This HAAS ST-40 Lathe was manufactured in the year 2019 in the United States. It is equipped with a HAAS control unit. The machine has a spindle speed of 2400 rpm.

This HAAS TR160 Spare Parts was manufactured in the year 2019. It has 2 axis.

This HAAS ST-10 Lathe was manufactured in 2017 in the United States and has 2470 spindle hours. It is equipped with a HAAS control unit. The machine disposes a rotary tool turret with 12 positions.

This HAAS VF-2 Vertical Machining center was manufactured in the year 2018 in the United States and has 7086 production hours, of which 3019 are cutting hours. It is equipped with a HAAS control unit and has 3 axis. The machine has a spindle speed of 8100 rpm, is in good condition and well maintained.

This HAAS ST-30L Lathe was manufactured in the year 2019 in the United States and has 1109 production hours, of which 64 are spindle hours. It is equipped with a HAAS control unit and has 2 axis. The machine has a spindle speed of 3400 rpm, is in perfect conditions and like new.

This HAAS ST 40 Lathe was manufactured in the year 2021 in the United States.It is equipped with a HAAS control unit. The machine disposes of a spindle with chip conveyor and 2 axis.

This HAAS UMC-500SS Universal Machining center was manufactured in the year 2021 in the United States. It is equipped with a HAAS CNC control unit and has 5 axis. The machine has a spindle speed of 15000 rpm.

This HAAS UMC-500SS Vertical Machining center was manufactured in the year 2021 in the United States. It is equipped with a HAAS control unit and has 5 axis. The machine has a spindle speed of 15000 rpm.

This HAAS UMC750SS Vertical machining centre was manufactured in the year 2019 in the United States. It is equipped with a HAAS control unit with Ethernet interface. The machine disposes of a 1 GB of memory for programs, a 15” COLOR LCD monitor, a USB port with memory lock key and a power failure detection module. There are a lot of options fitted on the machine that can be included.

This HAAS VF4SS used vertical machining centre was manufactured in the year 2019 in the United States. It is equipped with a HAAS control unit and has an Ethernet interface. The HAAS 5th axis transmission allows the use of a HAAS rotary table or indexer. The machine disposes of a 1 GB of memory for programs, a 15” COLOR LCD remote monitor, a USB port with memory lock key and a WiFi connection for HAAS control. There are a lot of options fitted on the machine that can be included.

This HAAS VF4-SS Vertical Machining Centre was made in the year 2019 in the United States. It is equipped with a Haas control unit and BT 40 tool holder with 30 slots in storage. As a 3 axis machine it has a spindle speed of 12000 rpm. With only 2,311 cutting time hours it comes in a very good condition.

This HAAS VF3SS Vertical Machining center was manufactured in the year 2016 and has 22849 production hours. It is equipped with a HAAS control unit. The machine has a spindle speed of 12000 rpm.