Haeusler 4 Roll Double Initial Pinch Hyd Plate Roll Model: VRM-HY Number of Driven Rolls: 4 Length of Rolls: 122.04" / 3100mm Capacity Pre Bend: 3.5" / 90mm Capacity: Rolling: 3.9" / 100mm Roll Diameter (Top): 31.1" / 790mm Roll Diameter (Bottom): 31.1" / 790mm Roll Diameter (Side): 23.6" / 600mm Roll Diameter (Spare Top): 25.5" / 650mm Main Motor Drive: 215 HP / 160kW Equipped With Double Initial Pinch Hydraulic Drop End Hydraulic Tilt of Top Roll Hydraulic Positioning of Side Rolls Top/Bottom Driven Via Cardon Shaft Drives to Gear Box Spare 25" / 650mm Top Roll For Smaller Diameter Rolling Set up for Hot Rolling
4-roll plate bending machine Mod. VRM NG HY 3000x40 Country of manufacture: Switzerland YOM: 1997 Brand: HAEUSLER AG Roll diameter 560/540/400 mm Roll thickness 40mm Roll length 3000mm Motor motor Power:55kW System: Hydraulic Voltage: 380V/3 phase Weight 45 000kg The quality of the machine is still very good.
Manufacturer: Haeusler Type: VRM HY 4000 x 45 Stock number: 0973 Year of construction: 2001 Bending length: 4000 mm Bending strength: 45 mm Bending (cold): 38 mm Drive power: 100 kW Number of reels: 4 Adjustable rollers: 3 Type of adjustment of the rollers: hydraulic Top roll diameter: 710 mm Underroll diameter: 640 mm Side roller diameter: 520 mm Working speed: 2+4 m/min (up to 8m/min) Machine weight (with roller): 78 t Accessories Electronic synchronization Air-cooled oil cooler Upper support device Side cylinder support device (10t) Inlet table (20t) hydr. Bubble storage Cone bending device
specifications: Max sheet width 3,000 mm Max sheet thickness at max yield strength 240 N/mm2 when bending to max. sheet width 35 mm when rounding Bend length 2.2 x S Max passage between rollers 145 mm Roller diameter upper roller 552 mm Underroller 532.4 mm Side rollers 400 mm Number of rollers 4 Powered rollers 2 top and bottom roller Drive of the rollers hydraulically Arrangement of the rollers symmetrically Rotation speed of the rollers 2-4 m/min Adjustable rollers 3 Type of adjustment of the rollers hydraulically Adjustment speed lower roller 0-200 mm/min. Side rollers 0-700 mm/min. Brake of the rollers pneumatic Actuation of the folding bearing hydraulically Operating voltage 3 x 380 V / 50 Hz Display device of the roll positions 4 x optical/analog Weight of the machine approx. 42 to Area 2.71 x 6.4 m Height 3.12 m
Technical data: 4 bending rolls Max bending range: 3,000 mm external switching and Control Panel, as well as counter holder
Technical data: maximum sheet width: 3000 mm maximum plate thickness at maximum yield of 240 N / mm² on bending: 35 mm On bending length: 2,2 x S Diameter of roller upper roller: 552 mm Bottom roll: 532,4 mm Side rolls: 400 mm
Description: SPECIFICATIONS Character: Haeusler Type: RMA 2,500x30 Year of construction: 1962 Mechanical: Yes Roller length: 2,500 mm Sheet thickness: 30 mm Number of rolls: 3 Upper roller diameter: ø450 mm weight approx.: 24,000 kg, Approx. Onsite Dimension. (l x w x h): 2,500 x 7,200 x 2,750 mm
Description: SPECIFICATIONS Character: Haeusler Type: HPR 10 Coker round: 89x5 mm - diameter 600 mm Solid round: 65 mm - diameter 600 mm Solid square: 50x50 mm - diameter 500 mm Solid rectangle difficult side: 90x15x10 mm - diameter 900 mm Corner iron outside: 90x90x11 mm - diameter 900 mm Angle iron inside: 70x70x10 mm - diameter 900 mm T-profile outer edge: 100x100x11 mm - diameter 1,000 mm T-profile inside edge: 70x70x10 mm - diameter 900 mm weight approx.: 2,000 kg, Approx. Onsite Dimension. (l x w x h): 1,300 x 1,400 x 1,800 mm
Description: SPECIFICATIONS Hydraulic 4-roll plate roller Character: Haeusler Type: VRM 3000/15 Roller length: 3,000 mm Plate thickness: 15 mm Number of rollers: 4 Upper roller diameter: ø350 mm Hydraulic folding Hydraulic lifting Conical rollers 2 Powered rollers Transport dimensions: 7,000 x 2,250 x 2,300 mm Machine weight: 21,000 kg Approx. Onsite Dimension. (l x w x h): 7,000 x 2,250 x 2,300 mm, weight approx.: 21,000 kg
Axis diameter: 95 double T-iron on the x-axis: mm U-iron on the x-axis: mm T - beam - web outwards: mm channels - flange: angle steel/side length: mm square bar steel: mm peripheral speed: m/min total power requirement: KW weight of the machine ca.: 3,5 t dimensions of the machine ca.: 1,6 x 1,5 x ,9 m Profile bending machine with: - 3 driven axles - Box with tools - Emergency stop facility The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
I-beam section - flat steel: 220 bei Dm 1200 mm I-beam section - upend: - mm angular steel - leg outwards: 110x110x14 bei Dm 1000 mm angular steel - leg inwards: 80x80x10 bei Dm 1000 mm flat steel flat: 100 x 20 bei Dm 1000 mm T-steel / side out: 120x120x13 bei Dm 1200 mm U-iron on the x-axis: 22 bei Dm 1200 mm pipes: 102 x 6 bei Dm 900 mm round material: 75 bei Dm 700 mm square material: 60 x 60 bei Dm 600 mm bending speed: 3,5 m/min No. - Rolls: 3 Drive: 7,5 kW shaft diameter: 125/135 mm weight: 6,4 t dimensions of the machine ca.: 2,1 x 2,4 x 1,5 m Condition: ready for operation: Electric 380 Volt: Set of standard rolls: I + H Motorized adjustable rollers: Control panel: Central lubrication: autom. Rolls for round material: 100 mm Machine manual: Heavy ASYMETRIC ring bending machine with mot. adjustment of both infeed rollers and mot. adjustment of the two lateral guide rollers, ...
sheet width: 2100 mm plate thickness: 20 mm pre-bending: . diameter of upper rolls: 300 mm diameter of lower rolls: 400 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 4000 mm plate thickness: 40,00 mm pre-bending: total power requirement: kW weight of the machine ca.: 78 t dimensions of the machine ca.: m Adjustable rollers 3 The rollers are adjusted hydraulically Top roller diameter 710 mm Bottom roller diameter 640 mm Side roller diameter 520 mm Working speed 2+4 m/min (up to 8m/min) Additional equipment Electronic synchronization Air-cooled oil cooler Upper support device Lateral cylinder support device (10t) Infeed table (20t) hydr. Bladder storage Cone bending device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1500 mm plate thickness: 5 mm pre-bending: 4 upper roll diameter: 185 mm lower roll diameter: 185 mm side roll diameter: 145 mm total power requirement: kW weight of the machine ca.: t dimensions of machine L x W x H: 4,0 x 1,23 x 1,6 m - conical bending - pneumatic hinged bearing The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Sheet thickness: 70,00 mm Bending length: 3050 mm Number of rolls: 4 Rolling width: 3050mm Rolling thickness 3x toproll Ø:60mm Rolling thickness 5x toproll Ø:70mm Rolling thickness prebending: 50mm Top Roll Ø: 630mm Bottom Roll Ø: 600mm Side roll Ø: 500mm Number of rolls: 4 Rolling speed: 0 - 5 Adjustiment lower roll: 200mm/min. Adjustment side rolls: 200mm/min. Number of driven rolls: 2 Power: & ...
Sheet thickness: 150,00 mm Bending length: 3000 mm Number of rolls: 4 MACH-id 5563 MAKE Haeusler TYPE VRM-HY YOP 1990 / 2000 SPECIFICATIONS Rolling width 3000 mm Rolling thickness 3x toproll Ø 120 mm Rolling thickness 5x toproll Ø 150 mm Rolling thickness prebending 100 mm Top Roll Ø 910 + 820 + 740 mm Bottom Roll Ø 940 mm Side roll Ø 780 mm Number of rolls 4 Rolling speed 2 + 4 m/min Adjustiment lower roll 200 mm/min. Adjustment side rolls &nbs ...
Sheet thickness: 60,00 mm Bending length: 4000 mm Number of rolls: 4 MACH-id 1784 MAKE Haeusler TYPE VRM HY YOP 2000 SPECIFICATIONS Rolling width 4000 mm Rolling thickness 3 x toproll Ø 60 mm Rolling thickness 5 x toproll Ø 50 mm Rolling thickness prebending 40 mm Top Roll Ø 710 mm Bottom Roll Ø 640 mm Side roll Ø 520 mm Number of rolls 4 Rolling speed 1/4/6/8 m/min Top support Yes Side supports Yes Number of driven rolls  ...
Sheet thickness: 60,00 mm Bending length: 3000 mm Number of rolls: 4 SPECIFICATIONS Controll Conventionel Hydraulic / Mechanical Hydraulic 3 or 4 roll 4 roller Maximum sheet thickness 60 mm Bending length 3000 mm Max. Rolling capacity Ø 2.500 60 mm Max. Prebending capacity Ø 2.500 45 mm Top Roll Ø 560 mm Bottom Roll Ø 540 mm Side Rolls Ø 400 mm Power 55.5 kW Working speed M/Min. 2 + 4 M/min.
Sheet thickness: 30,00 mm Bending length: 3000 mm Number of rolls: 4 MACH-id 4022 MAKE Haeusler Swiss TYPE VRM - HY YEAR SPECIFICATIONS Hydraulic / Mechanical Hydraulic 3 or 4 roll 4 roll Maximum sheet thickness 30 mm Bending length 3000 mm Max. Rolling capacity Ø 2.500 25 mm Max. Prebending capacity Ø 2.500 20 mm Top Roll Ø 420 mm Bottom Roll Ø 400 mm Side Rolls Ø 340 mm
Sheet thickness: 188,00 mm Bending length: 3100 mm Number of rolls: 4 Without side support Conical bending attachment Oil cooler Separate hydraulic power unit Central lubrication Rolling width: 3.000mm Rolling thickness 3x toproll Ø:34mm Rolling thickness 5x toproll Ø:38mm Rolling thickness prebending: 32mm Top Roll Ø: 460mm Bottom Roll Ø: 440mm Side roll Ø: 330mm Number of rolls: 380 Rolling speed: 2 + 4 m/min Adjustiment lower roll: 0 - 200 mm/min. Adjustm ...
Sheet thickness: 25,00 mm Bending length: 3100 mm Number of rolls: 4 SPECIFICATIES Besturing SIEMENS PANEL Werking Hydraulisch / Mechanisch Hydraulic3 of 4 rollenwals 4 roll Plaatdikte 25 mm Wals lengte in mm 3100 mm Max. wals dikte bij product Ø 2.500 20 mm Max. aanbuiging bij product Ø 2.500 10 mm Boven rol diameter Ø370 mm Onder rol diameter Ø370 mm Zij rollen diameter Ø260 mm Werk snelheid in M/Min. 0 - 4 M/min. AFMETINGEN Lengte 6950 mm Breedte 2180 mm Hoogte2100 mm
Sheet thickness: 30,00 mm Bending length: 3000 mm Number of rolls: 4 Rolling width: 3.000mm Rolling thickness 3x toproll Ø:22mm Rolling thickness 5x toproll Ø:30mm Rolling thickness prebending: 20mm Top Roll Ø: 420mm Bottom Roll Ø: 400mm Side roll Ø: 300mm Number of rolls: 4 Rolling speed: 0 - 4 m/min Adjustiment lower roll: 200mm/min. Adjustment side rolls: 200mm/min. Number of driven rolls: 2 Power: & ...
Sheet thickness: 12,00 mm Bending length: 1500 mm Number of rolls: 4 MACH-id 5219 MAKE Haeusler Swiss TYPE VRM HY 1500 x 12 / 10 YOP 2002 SPECIFICATIONS Control Conventionel Hydraulic / Mechanical hydraulic 3 or 4 roll 4 roll Maximum sheet thickness 12 mm Bending length 1500 mm Max. Rolling capacity Ø 2.500 12 mm Max. Prebending capacity Ø 2.500 10 mm Top Roll Ø 220 mm Bottom Roll Ø 220 mm Side Rolls Ø 200 mm Working speed M/Min.4 M/min. DIMENSIONS Lengt ...
Sheet thickness: 40,00 mm Bending length: 3050 mm Number of rolls: 4 Make Haeusler 40 mm Type VRM HY Year 1980 4 roll plate bender hydraulic 2 rolls driven Sheet thickness (mm)Bend = 40 mm Bending length (mm)Pre = 25 mm Number of rolls Length = 3.050 Top roll = 485 mm Conical bending 55 kW / 40 Ton
Rounds: 120 mm Squares: 0 mm Flats: 0 mm Flats on edge: 0 mm Angles: 0 mm (1) horizontal / (2) vertical: 1 MACH - ID 6413 Make: HAEUSLER Type: HPR 13 V+H YOP: 1985 Hydraulic side roll support Optical readout position side rolls Roll set for UPN 140 Roll set for T 120 Roll set for L 120 Roll set for Square 70 x 70 Horizontal and vertical:H + V Shaft Ø: 120mm Number of rolls: 3 Horizontal: Yes Vertical: Yes Resistance moment: 90CM³ Length: 2.200 mm Width: 2.300 mm Height: 1.90 ...
Sheet thickness: 100,00 mm Bending length: 3000 mm Number of rolls: 4 Make Haeusler 100 mm Type VRM HY Year 1994 Heavy Duty 4 roll plate benderS heet thickness (mm)T = 100 mm Bending length (mm)Pre = 80 mm Number of rolls L = 3.000 mm Top roll = 780 mm Side roll = 750 mm Hydro 2 roll power 165 kW CNC Controlled Double side support Top support Conical bending attachment Weight 125 ton
Sheet thickness: 3,00 mm Bending length: 2050 mm Number of rolls: 3 MACH - ID 6339 Make: HAEUSLER Type: SIHRV 10/3 YOP: 2001 Rolling width 2.050 mm Rolling thickness 3x toproll Ø 10 mm Rolling thickness 5x toproll Ø 13 mm Rolling thickness prebending 8 mm Top Roll Ø 250 mm Side roll Ø 230 mm Number of rolls 3 Rolling speed 0 - 7 m/min Number of driven rolls 3 Power 7.5 kW Dimensions Length 3.000 mm Width 2.200 mm Height 3.000 mm Weight 10.000 kg
Sheet thickness: 60,00 mm Bending length: 4000 mm Number of rolls: 4 Make Haeusler 4000 x 60 Type VRM-HY 4000 x 60/50 mm Year 2000 Haeusler VRM-HY 4000 x 60/50 mm rundbiegemaschine Sheet thickness (mm) 60 Bending length (mm)4000 Number of rolls 4 rolls CNC machine Toproll 710 mm, Toproll 640 mm, Side roll 520 mmExtra Smaller top roll of 440 mm Top Support Big side support
Sheet thickness: 40,00 mm Bending length: 5000 mm Number of rolls: 4 MACH-id 3552 MAKE Haeusler Swiss TYPE VRM - HY YEAR 1983 SPECIFICATIONS Hydraulic / Mechanical Hydraulic 3 or 4 roll 4 roll Maximum sheet thickness 40 mm mm Bending length 5000 mm Max. Rolling capacity Ø 2.500 35 mm Max. Prebending capacity Ø 2.500 30 mm Top Roll Ø 570 mm Bottom Roll Ø 460 mm Side Rolls Ø 460 mm
Sheet thickness: 20,00 mm Bending length: 3000 mm Number of rolls: 4 incl. hydraulic top support incl. side support incl. spare roll 300 mm ( small cones) Rolling width: 3.000mm Rolling thickness 3x toproll Ø:20mm Rolling thickness 5x toproll Ø:25mm Rolling thickness prebending: 18mm Top Roll Ø: 430 + 300 mm Bottom Roll Ø: 430mm Side roll Ø: 300mm Number of rolls: 4 Rolling speed: 2 + 4 m/min Adjustiment lower roll: 200mm/min. Adjustment side rolls: & ...
Capacity: 110 t Folding length: 4300 mm CNC Brand: _Unknown / Other CNC Model: Touchscreen ARA MACH-id 4418 MAKE SAFAN Holland TYPE PLCS 110 - 4300 TS3 YEAR 1998 SPECIFICATIONS Controll Touchscreen ARA Pressbrake / Folding / Mech. / Hydr. Pressbrake Hydraulic / Mechanical Hydraulic Bending length 4300 mm Distance between column 3600 mm Press force 110 Ton Throat 400 mm Stroke 180 mm Die height 480 mm Backgauge stroke X in mm 1000 mm ...
Working width: 3000mm, max. sheet thickness: 120mm, with optical display of roller adjustment, central lubrication, cone bending device, overrun brake and exchange top roller Ø820mm and Ø740mm.
Working width: 2500mm, max. sheet thickness: 20mm, lateral cylinder support device with three adjustable support rollers and conical bending device, machine provided for exchangeable top rollers up to min. Ø 450mm, machine revision 2009, factory inspection 2012.
Working width: 3000mm, max. sheet thickness: 110mm, with CNC control, central lubrication, cone bending device, infeed carriage, one upper and two lateral cylinder support devices.
Working width: 3000mm, max. sheet thickness: 12mm, with digital display of roller adjustment, central lubrication, air cooling, cone bending device and CNC controls.
Working width: 2500mm, max. sheet thickness: 20mm, with optical display of roller adjustment, central lubrication, cone bending device and overrun brake.
Working width: 2000mm, max. sheet thickness: 13mm, can be used horizontally and vertically, with decoiler, decoiler driven and hydraulically adjustable to coil diameter.
Working diameter: 1500-6000mm, working length: 1200-3000mm, wall thickness: 20-70mm.
Working diameter: 1500-6000mm, working length: 1200-3000mm, wall thickness: 20-70mm.
Make HAEUSLER Type VRM 1500 x 5 Year of construction 1964 Control conventional Sheet width 1500 mm Sheet thickness 5 mm Prebending 4 Upper roll diameter 185 mm Lower roll diameter 185 mm Side roll diameter 145 mm Dimensions of the machine L x W x H 4.0 x 1.23 x 1.6 m - Conical bending device - pneum. Folding stock
Sheet thickness: 70,00 mm Bending length: 3050 mm Number of rolls: 4 Rolling width: 3050mm Rolling thickness 3x toproll Ø:60mm Rolling thickness 5x toproll Ø:70mm Rolling thickness prebending: 50mm Top Roll Ø: 630mm Bottom Roll Ø: 600mm Side roll Ø: 500mm Number of rolls: 4 Rolling speed: 0 - 5 Adjustiment lower roll: 200mm/min. Adjustment side rolls: 200mm/min. Number of driven rolls: 2 Power: & ...