used HELD for sale

Injection moulding machine 3-colours (horizontal /vertical/ and 3rd in L-position with protective enclosure) with turntable available now from our warehouse Hannover Make: Arburg Type: 420C 1000-150/150/60 Built in 2003 Control: Selogica Hours: 20092 h +Closing Unit+ Clamping force: 1000 kN / 1000 to. Tie bar ratio: 420 x 420 mm Plate size: 570 x 570 mm Injection Unit 1 (150 unit) Screw size: 15 mm (high-screw) Pvlzwy Spray volume: 17 cc Spray weight: 15 gr. Spray pressure: 2750 bar Injection Unit 2 (150 unit Screw size: 15 mm (high-screw) Spray volume: 17 cc Spray weight: 15 gr. Spray pressure: 2750 bar Injection Unit 3 (60 unit) Screw size: 15 mm (high-screw) Spray volume: 17 cc Spray weight: 15 gr. Spray pressure: 2080 bar extras 1 ALLROUNDER 420 C 1000 - 150 / 150 / 60 fully hydraulic screw injection moulding machine Tool clampi ...

Universal like a handheld device, regardless of package size. If the daily volume of packages is limited, the M-PAC 3 comes into consideration. - For belts 5 – 15.5 mm wide, adjustable - 10 – to 20 strappings/min - Mobile, with lockable swivel castors - Package sizes independent - Adjustable working height - Weight: 50 kg The bandwidth depends on the weight of the package. From a weight of 20 kg, the width should be 9 mm. Attention: Belt rerouting by the operator! This is not a fully automatic machine!

Transport and pressure unit for oval pipes 3000 mm long at 80-1100 mm diameter (without lifting and traversing unit) - The device has a hydraulic supply built into the head (visible also in the picture). - Electrical supply with attached control box direct connection to 380 V. - Hand-held buttons for the pressing functions. W8bik - The unit was constructed according to CAD drawing set with principle drawing. - Required lifting unit max. 1 to. Chain hoist.

Machine type welding rotary table Brand MERKLE Type D 150 touch Supply voltage 1 x 230 V Speed range 0.05 – 10 rpm, infinitely variable Speed control 1 : 200 Torque 15 – 50 Nm Face plate diameter 400 mm Face plates - inner passage 60 mm Tilt angle of the face plate 135° Vertical load capacity 150 kg/1.5 kN Table height 750 mm Tilting movement manual, clampable and snap-in Tipping torque 130 Nm Pantograph 400 A at 80 % ED Connection for - foot switch single or double - Handheld remote control - Foot remote control Age 6 months Condition as good as new Weight 65 kg Warranty 24 months from date of delivery List factory price ex stock 3.550,00 € + VAT incl. surcharges Price kpl. ex warehouse Munich 2.890,00 € + VAT Foot switch simple with 3 mtr. cable 225,00 € + VAT 019.0.2900 Foot switch double with 3 mtr.  ...

Supply unit for handheld scanner BCS 302 ex, 17-21BB-0218, Bartec, new We have set the lowest price for the new part on the market. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece there is still a great discount. As good as new in original packaging! The part was bought from a spare parts warehouse of a company and has never been in operation, is completely as good as new and in its original packaging. Supply unit in the Ex area for intrinsically safe supply and separation of the data line to the hand held scanner BCS 302 ex. Test certificate Explosion protection type 07-3103-2512/242M Functional guarantee! We cannot provide a conventional warranty and warranty for second-hand parts. Since we know that the device works, we give you a functional guarantee when you purchase it. If the device does not work within 3 mon ...

Max. forge force : 6 Ton Max. dia. at weld : 14mm Max. length of rod held in spindle : 150mm

Electric-powered mobile pallet tilter. Extremely versatile and compact, handles more than 20 pallets per hour (maximum capacity: 1500 kg); it performs the change operation by tipping the load. All Toppy equipment has been designed to handle even the heaviest loads with ease, and is equipped with safety systems to prevent accidents at work, with particular attention to GMP regulations to ensure appropriate quality standards. In the specific case of mobile pallet changers, all Toppy trucks are equipped with high safety standards. Features: - handles more than 20 pallets per hour - maximum load capacity 1,500 kg 4 machines are available for sale. In excellent condition, almost never used. Operation: The pallet change operation takes place by tilting and rotating the product at 180°. The machine approaches the goods and inserts two forks under the pallet. Then, the forks  ...

5-axis machining centre with 10-fold tool changer for aluminium or PVC profiles Max. machining length: 12,000 mm Y-axis travel: 1000 mm Z-axis travel: 650 mm Swivel angle A-axis: 0° - 180° Angle C-axis: 0° - 180° Max. speed 24,000 rpm Weight: approx. 11,000 kg Minimum Quantity Spraying Tensioner detection and automatic displacement 20 pneumatic material clamps Pendulum operation through two light barrier areas Handheld control panel Conveyor belt Lots of tool holders, including saw blade Loading is included in the price The machine is already dismantled in our warehouse. Function video can be sent. The spindle was overhauled by the manufacturer (cost over 15,000 €)

3-axis machining centre with automatic 8-fold tool changer for aluminium or PVC profiles Max. travel X-axis: 6400 mm Max. travel Y-axis: 400 mm Max. Z-axis travel: 380 mm Control E 500 Infinitely variable speed up to 6,000 rpm Hand-held control unit Minimum Quantity Spraying 2 angle heads and a high-speed spindle Tensioner detection and automatic displacement 8 pneumatic material clamps Pendulum operation possible Devices Machine still at the customer's site, will be dismantled in mid-February

5-axis machining centre with tool changer for aluminium or PVC profiles Max. machining length: 15,000 mm Y-axis travel: 1150 mm Z-axis travel: 715 mm Swivel angle A-axis: 0° - 180° Angle C-axis: 0° - 180° Max. speed 24,000 rpm Spindle power: 21 kW Tool changer with 13 standard and 7 special tools Minimum Quantity Spraying Tensioner detection and automatic displacement 16 pneumatic material clamps Pendulum operation through two light barrier areas Handheld control panel Num calculator has been updated to Windows 10 control Spindle has been completely overhauled by the manufacturer (6-month warranty) Loading is included in the price, machine is dismantled in our warehouse Weight: approx. 14,500 kg

KNIFE GRINDER MVM AF 1500 -Italian made, Year 2001 -Max size 1500 mms. -Automatic grinder will precision grind all chipper, planer and guillotine knives to a length of 1500mm (59 inches) -The knives are held on a electro-magnetic bed and full flood coolant is applied to the grind area so the steel retains its original hardness -Speed control, available immediately -Many grinding tools, all accessories

Used joinery machine on behalf of a customer Manufacturer: Mafell Type ABA joinery line 12m Parcel With pictured additions. Mafell Machines -Drill with frame -Hand-held circular saw -Chainsaw -Trolley At the moment, the machine can still be viewed under electricity. N0ya3cbp3b ATTENTION Location: Leipzig Sale from foundation.! Dismantling must be carried out by the customer. Forklift can be provided. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty/guarantee is excluded. The goods are sold from the location / warehouse, with the transfer of risk to the buyer there, this ...

Ideal CSR Typ. 201 - 21 wire mesh production line CSR Project Jig welding machine Year of manufacture 1996 Switch / control cabinet kVa125 Made in Germany Control: W/Siemens Handheld Computer Control Mounted In Enclosed Wire Cage Safety Structure The coordinate welding machine CSR 201 is used for resisting point welding of sheet metal and wire products in stencils: Work-piece dimensions: Length max.1800 mm Width max. 750 mm Nldw7 Height max. 200 mm X-axis for driving the welding unit according to the work piece length, with a base frame, hardened liner guides, serrated toothed rack system and servomotor with incremental encoder, travel max. 1800mm programmable, max. Travel speed 1500 mm / s Positioning accuracy +/- 0.2mm Y axis for driving the welding unit according to work piece width, with hardened linear guides, rack system and rotary servo motor with incremental ...

Kuka KR150L130 Series2000 Built in 2002 Payload 130kg Weight 1245kg Range 2900mm Connection line 7m/15m Control KRC2 Built in 2002 Weight 185kg Software 4.1.7 SP08 Approx. 4173 operating hours Hand-held programmer KCP2 ..

Description Brand Kett Model Riceter J301 ID 7328 Status Active Price 500 € + VAT Location Oradea (RO) Handheld Portable Moisture Tester - Rice, Wheat, Barley, Oats. The largest selling moisture meter in the world, the Riceter sets the standard for handheld grain testers. To operate, place several grains of rice, wheat, barley or oats in the sample holder. Insert the holder and twist the integrated grinder. The sample is measured using the capacitance circuit and the moisture percentage is displayed on the bright red LED. Testing takes less than five seconds, allowing for rapid analysis of many samples. There is up to nine consecutive measurements that can be displayed and averaged. ExWorks. Price is negotiable. Contact Tel.: +40-359/175.575 Fax: +40-259/426.248 Mobil: +40-743/177.040 ; +40-740/221.698 Technical inspection can be organized at least 24 hrs be ...

1 Gebr. ELB Precision Surface Grinding Machine, Partially Overhauled Model : Optimal 6375 ND Sanding area : 600 X 375 X 375 mm Grinding wheel : 300 X 50 X 76.2 mm Year of construction : 1990 ACCESSORIES Electric magnetic clamping plate 600 X 350 mm (brand new) Digital display Y (vertical) and Z (horizontal) Hand-held lever dresser Wet grinding device with belt filter with new conveyor chain Grinding wheel holder with grinding wheel Legs Partially repainted and the functions checked. Control panel overhauled. New grinding spindle motor The machine was maintained by us and extensively repaired about 2 years ago.

Description - Optimal price-performance ratio - Easy operation and cleaning, low maintenance - Made of 1.4301 (stainless steel) - Color touch display - Operating software in German - Speed of the entire system 25-30 bags per minute, depending on the product and filling weight - Bags of different sizes can be processed within specified size dimensions. To do this, simple, manual settings must be made in each case. Specifications - Bag type: Doypack with zipper - Bag dimensions (LxW): 130-330mm x 100-200mm - Cycle number of bags: approx. 25-30 bags/min. - Power: 4.5kW / 400V / 50Hz - Air requirement: 0.4 m3/min - Dimensions (LxWxH): 2200mm x 1100mm x 1400mm - Weight: approx. 800kg Process 1. Doypacks are in the cassette compartment 2. Bag Picker removes the bag (via suction device) 3. Pouch is moved to the filling position (bag monitoring) 4. Bag is opened with the  ...

Industrial robot KUKA KR 150-2 Series 2000 6-axis robot Control KRC 2 with cable set and hand-held control unit Load capacity 150 kg 200mm arm extension Connecting cable 8m Dimensions: L 1300mm, W 3000mm, H, 2500 Weight: approx. 1300 kg Power supply: 400V, 50Hz, max. 7kW The gripper shown is not included in the scope of delivery Subject to errors, changes and prior sale

Semi-automatic flocking system Flockkabine Manufacturer: The system is used for coating and with different materials. It is also conceivable to use it as a painting system. In this particular case, the inner parts were coated by handheld compartments for the automotive industry. Plant size: Width: approx. 6.5 m Depth: approx. 2.8 m Height: 3, 3 m Lock doors Width: approx. 900 mm Height: approx. 600 mm

Semi-automatic flocking system The system is used for coating and with different materials. It is also conceivable to use it as a painting system. In this particular case, the inner parts were coated by handheld compartments for the automotive industry. The handheld boxes hung on a chain conveyor belt and were first sprayed with glue by hand. Afterwards, the boxes were sprayed with the flocking material in the individual flock cabins. The spraying direction changes from station to station.

Weed brush Nimos ECO-60 HM, three-point front attachment with PTO pump for brush-drive. Right-turning PTO drive in working direction! Also suitable for direct hydraulic drive. Hydraulic motor with flat-sealing hydraulic connections. For swivel functions 3 x dw required. Brush-circle D = approx. 700 mm, Swivel range from left to right approx. 250 cm. Other weed brushes stock, also hand-held and self-propelled work machine. ------ Jodau Municipal, Environmental & Green Care Technology ------- Used machines for plant & sports field maintenance, gardening & landscaping, cemetery technology & winter service, sweeping & disposal, environmental care, motors and more...

Max. load: 5000 kg Min. height: 525 mm Max. height: 885 mm Platform size: 2000 x 2500 mm Featured with: - Handheld controller Country of origin: Germany Motor power: 4 kW Machine LxWxH: 2000 x 2500 x 525 mm Machine weight: 1600 kg

Laser handheld spectrometer VULCAN for quick and easy chemical elemental analysis. Vulcan is one of the fastest metal analyzers on the market and is designed for durability. It offers reliable material identification in just one second, based on laser-induced plasma spectrometry, without any X-rays. Whether for scrap sorting or PMI quality control, Vulcan always provides precise and consistent material ID data. Significant increase in productivity An increased number of analyses per day makes all the difference, especially with extensive inventories. Low operating costs Because Vulcan is a laser device, employees don't have to attend expensive and time-consuming radiation training and certification training. Long-lived Vulcan is IP54 certified (equivalent to NEMA3) and meets military standards for robustness (MIL-STD-810G). It also comes with a 3-year warranty. Prove ...

Optical Emission Spectrometers (OES) are characterized by the fact that they provide complete chemical analysis, even of critical alloying elements at low detection limits, which handheld XRF and LIBS devices cannot achieve: carbon, phosphorus, sulfur, boron, arsenic and tin in low-alloy, stainless steels and nitrogen in duplex steels. For this reason, spark spectrometry is the world's most reliable and widely used method for creating and verifying MTR's (Mill Testing Reports). Our instruments also meet the world's most stringent PMI testing requirements for metallurgical alloy chemistry, including API 5L testing, API RP578, ASME Section IX B& PV, ISO 17025 and A2LA standards.

Laser handheld spectrometer VULCAN for quick and easy chemical elemental analysis. Vulcan is one of the fastest metal analyzers on the market and is designed to last. It provides reliable material identification in just one second, based on laser-induced plasma spectrometry, without any X-rays. Whether for scrap sorting or PMI quality control, Vulcan always provides accurate and consistent material ID data. Significant increase in productivity An increased number of analyses per day makes all the difference, especially for extensive inventories. Low operating costs Because Vulcan is a laser device, employees do not need to attend expensive and time-consuming radiation training and certification training. Long-lived Vulcan is IP54 certified (equivalent to NEMA3) and meets military ruggedness standards (MIL-STD-810G). It also comes with a 3-year warranty. Proven It is ...

XMET8000 handheld spectrometer for quick and easy elemental analysis and many other possibilities. The X-MET8000 handheld XRF instruments offer high performance for reliable testing of materials and chemical compositions: fast, precise analysis for fast sorting (metals, polymers, wood, solutions, soil, ores, minerals, etc.). The X-MET is practical, robust and easy to use, for results you can rely on. The X-MET is perfect for the analysis of light elements (Mg, Al, Si, P, S, Cl). It offers the lowest detection thresholds with laboratory-quality results in seconds, day after day. Test a wide range of materials with the versatile fundamental parameter (FP) method and empirical calibrations (traceable to certified reference materials) where the highest precision and accuracy is required. Friendly The intuitive, icon-based user interface requires minimal operator instruction.  ...

The X-MET8000 handheld XRF devices offer high performance for the reliable testing of materials and chemical compositions: fast, precise analysis for fast sorting (metals, polymers, wood, solutions, soil, ores, minerals, etc.). The X-MET is practical, robust and easy to use, for results you can rely on. The X-MET is perfect for the analysis of light elements (Mg, Al, Si, P, S, Cl). It offers the lowest detection thresholds with laboratory-quality results in seconds, day after day. Test a wide range of materials with the versatile fundamental parameter (FP) method and empirical calibrations (traceable to certified reference materials) where the highest precision and accuracy are required. Friendly The intuitive, icon-based user interface requires minimal operator instruction. Excellent ergonomics Lightweight (only 1.5 kg), compact, ergonmomic. You can use the X-MET for a lo ...

Round-cut heading machine for whitefish Baader IS033 Processes: cod and other whitefish with throat cut Working range: 1-13 kg Throughput rate: up to 30 fish/min Operator: 1 person The fish is placed belly to operator head first into the machine. The fish head is held and the entire fish is transported to the knife section where a high-yield head cut is performed. The main body of the fish, with collarbone on, discharges to the front of the machine. The head is transported via a chute to the rear of the machine. Thanks to its construction, the operator has a clear view of the machine. Adjustments e.g. for adaptations or service operation are performed easily and operator-friendly as well as knife replacement. Technical Data: Water consumption: 10 l/min Power consumption: 2.2 kW Features Maximum yield Easy handling and clean up No size adjustment ne ...

Epson G10-854SR Robot Screwdriving Station Dosing Station Assembly of parts for car radios and navigation systems and for testing them. The assembly station is designed as a closed aluminium frame with a steel welding frame inserted and has a very compact design. The control cabinets and valve terminals are integrated into the system. All movement processes during the operation of the system can be tracked on all sides through large windows and doors. Operation is via a touch screen. The assembly station is divided into substations 3.1 dosing area, 3.2 assembly area KK+SW and 3.3 mounting area front. (KK=heat sink, SW=bulkhead angle) The work steps according to these assembly areas are described below: St.3.1: Dosing range - a WT with attached chassis and printed circuit boards enters the dosing area via the transfer belt. - this is stopped at the stroke positioning ...

Bosch Turbo Scara SR 800EC robot + control IQ 150 + handheld control unit PHG 2000 Manufacturer: Bosch Order No. 3842506428 Series No. 764840020 Maximum load on gripper flange: 100 N Stroke 3rd axis 320 mm Pn.-Duuck 4-8 bar Weight: 100 kg Swivel range see diagram Item condition used In addition to about 50 paternosters, countless other machines such as presses, robots, furnaces, industrial vacuum cleaners, etc. are available. Workshop equipment, workbenches, workshop trolleys, tools, forklifts and shelves abundantly available A total of 24,000 m² of production space will be dismantled and sold Please also note our other offers.' After purchase, the amount is due within 7 working days.

ELHA 6 Axis Horizontal Machining Center Xpert-K High-Performance Horizontal Machining Center The newly designed DEPO XPERT K horizontal machining centre offers a high degree of flexibility and above-average productivity. Description Horizontal BAZ The 6 axes are individually controllable. The HSK 100 holder makes it possible to clamp large tools and thus process large areas with high chip removal. Installed is a high-performance G30 fork head spindle with hydromechanical clamping system and a hybrid slewing bearing at top speed which allows extremely high speeds to be driven in order to achieve an optimal milling result even with the smallest tools. This fork head is equipped with a fully automated spindle change cycle, which makes it possible to replace the complete spindle in less than an hour. A hydraulic clamping device is installed for clamping components (effective table ...

Control type: CNC Sinumerik 840D-SL x-way 1135 mm y-way 1050 mm z-way 750 mm table size 1400 x 1050 mm Table load 2500 kg max. workpiece size LxWxH 1400 x 1240 x 750 mm Speed 10000 rpm feed speeds X/Y/Z Axis 40000 mm/min Expressspeeds x/y/z 40000 mm/min Tool holder HSK-A100 HSK Number of places in the tool magazine 30 places max. tool weight 20 kg max. tool length 395 mm max. tool diameter 110 mm Machine height 3294 mm Drive power - spindle motor 44 kW machine weight approx. 17.9 t Space requirements approx. 15 m2 Information: Universal milling machine in mono BLOCK design (3-axis) - available September 2019 - only 3800 spindle hours, 13400 power-on hours Equipment / Accessories: - Coolant system - High-pressure pump - Chip conveyor - Hand-held panel - BALLUFF option - Documentation

Built-in screwdriver with control, BL57/50 MDW, 457010, Pico/mA, DSM, used Top Attention special price! (For your info - current new price for this screwdriver and control € 9.500 excl. VAT) We have set the lowest price on the market for a comparable used part. We still have several identical and other such units, but the quantity is ending. If you buy more than 1 piece you will get a great discount. If you have a UID number we will gladly issue an invoice without VAT. Used - Top condition The part was bought from a company in the course of a machine dismantling and is in very good condition. Technical data: Screwdriver BL57/50 MDW, DSM 457010, max. 50Nm, incl. all cable sets. This high quality DSM screwdriver is designed for direct measurement of torque and angle of rotation. The high-precision transducers required for this are installed directly on the output. The meas ...

Vehicle: • Make: Nissan – machine overhauled 2023 • UVV Audit 11-2023 • Type: EGH02 F30U • Drive type: Diesel • Engine: Nissan 4 cyl. • Transmission: Automatic • Load capacity: 3000 kg • Load center: 500 • Lifting height: 3300 mm • Hours: 6557 • Internal no.: 03122023 Mast data: • Mast: Duplex with free lift and side shift • Lifting height: 3300 mm • Fork carriage: 1200 mm • Fork length: 1200 mm • Fork width: 100 mm • Fork thickness: 50 mm Dimensions: • Length: 2530 mm • Width: 1120 mm • Overall height: 2050 mm • Weight: 4390 kg Battery: NEW Tyres: • Front tyres: solid rubber tyres • Rear tyres: pneumatic tyres Attachments & special equipment: - Longer forks are available at an additional cost - Operating instructions available Extras: Preparation for road approval Mirror 3 Auxiliary h ...

Dimensions L6000mm, H2000mm, W600mm Powder oven electrically heated 2 powder extraction wall Manual sliding system with transverse carriage incl. steel construction Handheld powderer Wagner Prima Sprint Assembly.

Description Hoesch MFD CNC Heavy Duty Lathe with Siemens Control Details Face plate Ø 2,006 mm Center height 1,499 mm Reversible saddle Ø 2,235 mm Circulation diameter over bed Ø 2,997 mm Turning length 12,192 mm min/max workpiece held in chuck Ø 457 mm/1,600 mm Maximum workpiece weight 110 tons Speed range 0.5-140rpm (300hp engine) Feed range 0.0118-7.08"/rpm Permanent capacity Ø 356-902 mm Copy depth 508 mm inductive Maximum cutting force 30,000 Nm Double drum with constant capacity Ø 356-902 mm 50 Ton Capacity, Roll Type

with 60 rinsing stations, 80 filling valves and 14 head screw capper Capacity: 2.0 l dia 99.8 x H= 350.00 mm - capacity: 7,000 bph 1.0 l dia 81.37 x H= 276.17 mm - capacity: 14,000 bph 0.6 l dia 68.0 x H= 245.16 mm - capacity: 20,000 bph The filler and rinser will be completely dismantled. All gear wheels on the filler are brand new. So the main bearing will be renewed. The filling valves will be complete renewed into new generation neck holding filling valves. The product inlet pipe will be renewed. All types will be renewed. So the Alcoa screw capper will be complete dismantled and modified, with a pick in place system to handle 28mm plastic screw caps. The AVE rinser will also be complete dismantled and rebuild from the beginning. The filling valves of the filler are neck holding filling valves so the filler does not have lifting cylinders anymore. The complete bottle tra ...

5-axis machining center with 2-fold pallet changer Travel x/ y/ z = 600/ 770/ 675 mm Swivel/rotary table (A/B axis) Pallet changer 2-fold Pallet size 400x400 mm Spindle speed up to 16,000 1/min Spindle power 160/ 223 Nm Tool magazine 34-fold + additional magazine 99 tool positions Tool holder HSK 63 - Control Siemens 840D sl - Additional magazine TM99 - Automatic opening/closing for manual loading and unloading - Pallets with fluid connections (coupling connections) - Electromechanical tool length device - Infrared probe Renishaw - Internal coolant supply, infinitely variable up to 38 bar - Handheld control unit - Workspace extraction - Remote machine diagnostics - Brankamp machine protection system - Hydraulic clamping of the workpieces on the pallet

Axles: 6 Type: S3Q883-1-1 Load: 3kg Range: 677mm Year of construction: 2004 Condition: used spare parts carrier Accessories: Cable, handheld MCP 4, control, adept CIP 2

Axles: 6 Control: S3 Type: M92 Load: 30 kg Range: 1080 mm Accessories: handheld programming device Attention: without cable Condition: This robot only as spare parts support is available due to his age. The industrial robot has works fine up to the disassembly.

Machine type point welding pliers Make TECNA Type Power Pointer 7900 Connection voltage 1 x 400 V switch-on time 50% ED at 2.0 kVA current setting infinitely variable max. pointable material thickness 2.0 + 2.0 mm Version portable handheld device with built-in control Fuse 16 amperes, sluggish Short-circuit power 7.2 kA discharge min. 125 mm max. 500 mm Weight 12 kg Age 12 months Condition as good as new Warranty 18 months from delivery date New price €1,210.00 + VAT Price €720.00 + VAT Car MobiDrive €75.00 Copper rod 10 mm, 1 mtr. long 40.00 €/mtr. Item No. n355.0.0051 Copper rod 12 mm, 1 mtr. long 47.00 €/mtr. Item No. n355.0.0053 Copper rod 14 mm, 1 mtr. long 60.00 €/mtr. Item No. n355.0.0055 Electrode sharpener for drill 34,00 € Item No. n353.5.3910 Electrode sharpener for hand cutting 129.00 € Item N ...

Machine type point welding pliers Make TECNA Type Power Pointer 7902P - Pulse Connection voltage 1 x 400 V switch-on time 50% ED at 2.5 kVA current setting infinitely variable max. pointable material thickness 2.5 + 2.5 mm Version portable handheld device with built-in control Fuse 16 amperes, sluggish Short-circuit power 8.2 kVA discharge min. 125 mm max. 500 mm Special accessories incl. pulse current, especially for galvanized sheets Weight 13 kg Age 12 months Condition as good as new Warranty 18 months from delivery date New price €1,490.00 + VAT Price €890.00 + VAT Car MobiDrive €75.00 Copper rod 10 mm, 1 mtr. long 40.00 €/mtr. Item No. n355.0.0051 Copper rod 12 mm, 1 mtr. long 47.00 €/mtr. Item No. n355.0.0053 Copper rod 14 mm, 1 mtr. long 60.00 €/mtr. Item No. n355.0.0055 Electrode sharpener for drill 34,00 €  ...

Several used robots Brand: KUKA Type: KR 150L150SP/2 Year of construction: 2000 Hours of operation: approx. 700 Nominal / load capacity: 150 kg Additional load at rated load: 80 kg Maximum total load: 230 kg Arm length: 1200 mm Max range: 2610 mm Repeatability: +/-0.2 mm Engine power: 19.8 kW Working volume: 51 m³ Weight: 1135 kg Accessories: -Control hardware and software -Handheld -Connection cable Usage possibilities: -Spot welding -Manage -Mount -Application of adhesives, sealants and preservatives -Edit: milling, drilling, grinding, brushing, polishing... -MIG/MAG welding -YAG-laser welding -Waterjet cutting On request at an additional cost: -Training, programming, commissioning ex works (without customer-specific applications). -Programming and commissioning with customer-specific application -Paint in color of your choice The pictured robot  ...

Several used robots Brand: KUKA Type: KR 200L 120/2 Year of construction: 2000 Hours of operation: approx. 800 Nominal / load capacity: 120 kg Additional load at rated load: 80 kg Maximum total load: 200 kg Arm length: 1400 mm Max range: 2810 mm Repeatability: +/-0.3 mm Engine power: 19.8 kW Working volume: approx. 65 m ³ Weight: 1140 kg Accessories: -Control hardware and software -Handheld -Connection cable Usage possibilities: -Spot welding -Manage -Mount -Application of adhesives, sealants and preservatives -Edit: milling, drilling, grinding, brushing, polishing... -MIG/MAG welding -YAG-laser welding -Waterjet cutting On request at an additional cost: -Training, programming, commissioning ex works (without customer-specific applications). -Programming and commissioning with customer-specific application -Paint in color of your choice The picture ...

Manufacturer: Neolt Model: Electro Power Trim PLUS 250 Year: 2003 equipment: - electric rotary cutter with rotating circular knife - Cutting thickness up to 1.6 mm - Triggering of the cutting process by hand contact strip or foot pedal - Transparent pressure rail with which the material to be cut is held during the cutting process is automatically pressed - Illuminated cutting edge - Collection bag for clippings - Connection: 230 V/ 50 Hz - Dimensions: 2,950 x 500 x 1,050 mm (WxDxH) - Weight: approx. 100 kg Ideal for cutting paper, pop-up and other displays, laminated Printing, banners, tarpaulins and self-adhesive foils. The device works and was used very little. Availability: In stock Defects: none Price: on request

Rated capacity: 2000 Watt work piece lenght: 1075 nm Temperature range: 15 - 40 °C dimensions: 550 x 1100 x 1200 mm total wight: 200 kg Mobile laser welder with PenWelder hand-held PenWelder: - pulsed laser operation - average laser power up to max 500 W - Pulse duration 1 to 200 ms depending on application - peak pulse power 1000, 1500 or 2000 W - Siemens control - Integrated protective gas supply - Exchangeable -, adaptable process module (contact tips) - Pilot laser from laser source - Laser parameters via control panel Laser light cable LLK-A / BF 10: - Diameter(µ): 300 / 400 / 600 - Length(m): 4 / 6 / 10 / 20 Unit little used The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 0 mm table width: 0 mm table load: 0 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 1991 : 1681 : ca. 2 Wochen ab Auftragse : Bulgarien : 7900 € : 1 : 580 mm : 2000 mm : 285 mm : 72 mm : 380 mm : 400 mm : DIN55022, Größe 8 : 80 M : 11,2 - 2000 1/min : 0.04 - 3 mm : 255 mm : 140 mm : 75 mm : 5 MK : 200 mm : 7.5 kW : 3550 mm : 1250 mm : 1630 mm : 3450 kg 3-axes digital read out RSF 3-jaw chuck Forkardt Dm. 315 mm steady rest 4x steel holder gap bed type chuck protection machine lamp coolant equipment operating manual in German WITH FOLLOWING DEFECT: the clockwise rotation does not engage, so the hand lever must remain held The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 400 mm gear width: 500 mm max. module: 15 min. module: 0,5 total power requirement: 2,5 kW weight of the machine ca.: 2 t dimensions of the machine ca.: m H O E F L E R (Germany) CNC Controlled 4 Axis Inspection Centre for Gears Model EMZ 400 Year 1988 Serial No. 067 047 ____________________________________________________ Working range: Min./max. gear Ø / base circle Ø 0 – 400 / 390 mm Module range 0.5 – 15 Gear width, max. 500 mm Travel of measuring head, approx. +/- 180 mm Helix angle 0 – 60 ° Max. weight of workpiece, approx. 250 kg Distance between centres, approx. 1,000 mm Distance between centre and body of counter steady 205 mm Table Ø, approx. 290 mm Plotter diagram scales 50 / 1 ...

table length: 500 mm table width: 350 mm ampere: 65 A Control: AGIEVISION 5 CNC total power requirement: 20 kW weight of the machine ca.: 4000 kg dimensions of the machine ca.: m A G I E (Switzerland) CNC - Controlled Wire Cutting EDM Machine Model AGIECUT PROGRESS V 3, Year 2007 Working range, X Y Z (=height) 500 x 350 x 426 mm Wire head, U-V axis (helical/taper cuts) + / - 30 °/ +/- 70 mm Resolution of axes 0.0001 mm Speed for positioning the axes up to 3 m/Min. Tolerances (If machine is new) 4 µ Workpiece dimensions, L x W x H max. 1.050 x 650 x 420 mm Max.weight of workpiece with/w.o. Dieelektricum 400/800 kg Clamping System Universal Beams with fixing holes Cutting wire Ø 0.2 – 0.33 mm Size of wire roll up to 25 kg Cutting speed of wire  ...