used HIDROBRASIL for sale

Oil-hydraulic double-column press 400 T with sliding table Press type: Double column press Thermally neutral 80 – 120 °C Number of operating pages 1 page Forces Pressing force max. 4000 kN Free tear-off force max. 400 kN Print build-up time Closed tool steel on steel Max. 4 sec. Dimensions: 3,800 mm long and 4,475 mm wide Max. opening width 800mm Stroke 800mm Table height above floor 1100mm Height above ground (height) approx. 4300 mm Hall height min. 5500 mm Parallel deviation at 20°C +/- 0.1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.2 mm/m Weight Total weight of the press without consumables and table top approx. 28 tons Press table Table size 1500x1500 mm Velocities Quick closing at 100 mm sec. Pressing speed 8 – 3 mm sec. Acoustic pressure Sound pressure level, measured at a height of 1.5m on the control pane ...

Here are the technical data of the offered machine: Technical data + information: • No-load speed up to 40 mm/sec • Opening speed up to 40 mm/sec • Starting press speed 5–15 mm/sec • Table size/heating plate size 600 × 600 mm • Plunger size/heating plate size 600 × 600 mm • 2 heating plates, electrically heated, up to 250 degrees – as OPTION • Total size approx. 2000 × 1000 × 2800 mm height • OIL temperature monitoring • Automatic lubrication • Free positioning of the plunger • SICK/LEUTZE light barriers 14.1 mm on the front • Circulating oil cooling • Pressure holding valve 0 to 1800 sec. • Rear monitored door • Pressure adjustment from 30 T to 120 T • Travel limitation either by pressure or position • Programming set-up mode, single stroke (adjustable via rotary switch) • Control panel permanently installed in the wall  ...

Hydraulic 20 T single-stand production press for the production of lightweight concrete parts Here are the technical data of the offered machine: If the press does not exactly meet your requirements profile, please request an individual offer exactly according to your wishes with one click: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your wishes at surprisingly low prices! Technical data + information: a) Closing speed up to 10 mm/sec b) Opening speed up to 20 mm/sec c) Open maximum height 300 mm d) Pressing speed 4 – 10 mm/sec. ( adjustable via rotary knob ) e) Mould size 600x800 mm f) Plunger size950x600 mm g) Manual lubrication( via lubrication nipples ) h) Pressure setting from 5 T to 20 ( adjustable via rotary knob ) i) Travel 300 mm j) Construction, commissioning, instruction against separate calculation  ...

Double column press with 200 T output, Idle speed 45 mm/sec Opening speed 60 mm/sec Starting press speed 9 mm/sec Table size 2000x600mm Plunger size 2000x600mm OIL temperature monitoring Manual lubrication Free positioning of the plunger ( adjustable via adjustable sensors ) PILZ photoelectric sensors 14.1 mm on front and back Circulatory oil cooling Pressure retaining valve 0 to 600 sec. Mechanical plunger protection at the upper breakpoint T-grooves according to DIN, and according to customer requirements Pressure adjustment from 40 T to 200 T (adjustable via rotary knob) Travel limitation optionally via pressure or position Set-up operation, single stroke ( adjustable via key switch ) Two-hand operation Construction, commissioning, instruction against separate calculation Design Press design double column press Therma ...

It has a cylinder for 10 to 135 T and a small additional cylinder for 1500 kg to 7 T. Empty run with 2-10mm second Pressing speed 2 mm second Table size 1100x650x120mm 800 mm maximum open height Table height max. 900 mm Travel of the cylinder is 400 mm Total height 2900 mm Weight 2.3 T 200 L tank Pump with 60 L output 5 KW main motor Control system PLC SIEMENS or PILZ RSS4000- S 7 1200 Safety control PILZ Communication Operator/Press Coloured Touch Screen 10" OMRON/SIEMENS

pressure:100 t passage width:500 mm stroke:400 mm Approx. weight (w/o operational materials):5,5 t Measurements L x W x H:ca. 1300 x 2800 x 2900 mm Table size:800 x 500 mit T-Nuten mm Table height above ground level:850 mm Oil Tank Capacity:140 l main cylinder:220 Ø mm Auxiliary cylinder:2 Stk - 50 x 30 Ø mm Auxiliary guidance:2 Stk - 50 Ø stk. Engine Output:11 kW :26 Lt./min. Approach Speed:110 mm/sec Pressure Speed:120 mm/sec Return Speed:12 - 4 mm/sec Ram plate:800 x 500 mit T-Nuten mm pre-run valve:1 Stk Siemens Control System:S7 1200 Monitor:Siemens 7 Zoll Light sensors sick:700 + 150 mm Special feature: When operating at 260bar the machine reaches a pressure level of 70 tons.

Portal straightening press with 300 T capacity a) No-load and pressing speed up to 17 mm/sec b) Opening speed up to 55 mm/sec c) Table size 2500x1600mm d) Open height 700 mm e) Total size approx. LBH 4500 x 2300 x 3700 mm f) OIL temperature display on the tank g) Lubrication via lubrication nipples h) Table in grid construction, with T grooves according to customer requirements, otherwise 22mm i) Operation on swivel arm, mounted on the bridge j) Pressure setting from 50 T to 300 Tvia MONITOR k) Bridge moves through two geared motors, over racks l) Cylinder moves to the left and right over racks m) Machine body double painted n) Cylinder induction hardened Design Press type PORTALPRESSE Thermally neutral 80 – 120 °C Number of operating pages 3 pages Forces Pressing force max. 3,000 kN Free tearing force max. 500 kN Pressure build-up time Closed tool St ...

2 x 10 T, adjustable from 1.3 to 10 T Plunger size 250x250mm forward 10 mm second Backwards 25 mm second Travel 100 mm per side, Interior 200 to 400 mm Two-hand operation Motor 1 KW Tank for 60 L hydraulic oil the machine can also be supplied in other sizes and thicknesses.

Portal straightening press with 400 T capacity Oil-hydraulic double column press a) No-load and pressing speed up to 17 mm/sec b) Opening speed up to 60 mm/sec c) Table size 6000x3000mm d) Open height 1500 mm e) Total size approx. LBH 6000 x 5000 x 4500 mm f) OIL temperature display on the tank g) Lubrication via lubrication nipples h) table in grid construction, i) Operation on swivel arm, mounted on the bridge j) Pressure setting from 60 T to 400 T via MONITOR k) Bridge moves through two geared motors, over racks l) Cylinder moves to the left and right over racks m) Machine body powder-coated, or double-painted n) T-grooves according to customer requirements o) Cylinder induction hardened PORTAL PRESS Thermally neutral 80 – 120 °C Number of operating pages 3 pages Forces Pressing force max. 4000 kN Free tearing force ...

Single-column press with 15 T power suitable for continuous shift operation (a) travel speed 10 mm downwards; b) Opening speed up to 25 mm/sec c) Starting pressing speed 10 mm/sec d) Table size 400x400 mm e) Ram size 200x200 mm, with T slots and central cylinder tension f) Total size approx. 1150x800x1750 mm g) Oil temperature display on the oil tank h) Pressure adjustment from 5 T to 17 T (adjustable via rotary control) i) Two-speed hand lever operation j) Machine body powder-coated, or double painted k) Control cabinet supply cable from above with 3000 mm cable and 16 ampere plug l) Installation, commissioning, instruction against separate charge Press type single-column press Thermally neutral 80 – 120 °C Number of operating pages 1 page Forces Pressing force max. ( at 250 bar ) 150 kN Free tear-off force max. 10 kN Pressure build-up time Closed tool Stee ...