Model
(Manufacturer: HIRT)
T-shirt bag making machine HEMINGSTONE HM-800ST2 Two lines with hot knife and side gusseting device Can run also with two separate rolls already with side gussets from the extruder Maximum bag width 2 x 330 mm Maximum bag length 700 mm. Maximum film width 1100 mm Maximum production speed 200 cycles/min.
Clamping force [kN] 500 Dimensions of mounting plates (hxv) [mm] 600 x 600 Clearance between columns (hxv) [mm] 370x370 Min./max. mold height [mm] min 200 Maximum opening width [mm] 600 Injection unit Screw diameter [mm] thirty Injection volume [cm3] 85 Injection weight [g] 77 Injection pressure [bar] 2025 Electrical and hydraulic equipment Rated power of the pump motor [kW] 11 Heater power [kW] 8 Dimensions and weight Net weight with control cabinet [t] 2.65 Dimensions (length x width x height) [m] 3.53 x 1.42 x 1.96
Injection weight: 85 g Closing force: 700 kN State: Used Screw diameter: thirty Injection pressure: 2470 Column spacing: 320x320 Size of plates: 476x476 Min mold height: 200 Control type: Selogica Tongue: German,Polish Installed power: 35 Working hours: 59684 Libra: 2350 Dimensions: 3.25 x 2 Feed hopper: NO
Description of the Machine and Accessories Manufacturer: SALDOFLEX Model: MODULA S 1100 Year: 1998 Working width welding mm.1100 Minimum length mm.320 bags Film width (mm) Max. 1500 Maximum length of 700 mm bags (mm.1200 open mouth) Max mechanical speed strokes / minute 200 Maximum speed film meters / minute 160 Tupe bag:t shirt bag ,handle bag Drive:Servo Material that can be processed: LDPE, HDPE, BIO , LLDPE and recycled Number of lanes: 3 Photocell Antistatic bar With unwinder, cutter, bellows and blower table 2.Rebuilding in Saldoflex factory 2016
Machine manufacturer: ROLL O MATIC Machine model: DELTA 1100 Year of manufacturing: 2016 Materials: HDPE – LDPE - BIO Condition: in production Working hours: 812 Hours Complete line: YES Machine dimension: (length 17.5m /width 3.5m /height (2.5m to 3.3m) Welding width: 900 (3 X 300) Plastic type bag: T-shirt bag / bottom seal bag Final positioning of the bags: roll Bag length: Max: 3000mm; Min: 250mm Bag width: Max: 3X250mm; Min: - mm Film thickness: Max:60 microns; Min: 8 microns Bottom gusseting: No Side gusseting: Yes Depth: 150mm Output: Cycles/minute: 300 Production: Meters/min: 160 Unwinder: Type:Width + motorized shaft Mother roll width: 1700 Mm Unwind shaft: Number: X 1 ; Type: Pneumatic Mother roll diameter: 800 mm Web guide: Yes Sealer/Longitudinal: Yes Number lanes: 3 Photoelectric cell control: YES Sealing bar: Bottom Drive: Servo Control p ...
Three lines hot-slitting T-shirt bag making machine, super high speed with fully automatic production.Special design servo-driven bag feeding is easy to operate.Equipped the multi auto alarms with automatic stop design for safety.Independent three lines temperature control.Equipped with multi auto tension control to maintain the stability of the film roll.High efficiency on production.Improved tension auto control to enhance the productivity.Special Rocking System design to avoid overlap of bags sealing lines from sticking.Film width (mm) Max. 1500 Bag Size (mm)  Width (mm) Max. 330 x 3Length (mm) Max. 700Max. Production Speed (cycles/min)  Max. 300
Closing unit Clamping force [kN] 2000 Dimensions of mounting plates (hxv) [mm] 795x795 Clearance between columns (hxv) [mm] 570x570 Injection unit Screw diameter [mm] 50 Injection volume [cm3] 392 Injection weight [g] 356 Injection pressure [bar] 2000 Electrical and hydraulic equipment Rated power of the pump motor [kW] thirty Heater power [kW] 14.9 Dimensions and weight Net weight with control cabinet [t] 7.9 Dimensions (length x width x height) [m] 5.53x1.79x2.20
Drilling and milling machine Skoda HCW2 Machine type: HCW 2-180 5/16m Year of construction: 2009 Manufacturer: Skoda Plzen, CZ Control: CNC840D-Powerline Country of manufacture: Czech Republic Freight basis: from storage location + VAT incl. Dismatling and loading Technical data Control Siemens 840 D Powerline Travel distances X-axis 15,000 mm cross-column Y-axis 5,000 mm headstock vertical Z-axis 1,300 mm support beam (RAM) - horizontal W-axis 1,000 mm quill stroke horizontal Machine table rotary table plate field: Length 3,500mm 3,780mm Width 3,000mm 8,000mm max. table load: 60 t Travel 2500mm (V-axis) Drilling/milling spindle Tool taper: ISO 50 Quill Ø 180 mm RAM cross section 450 x 450 mm Power 100KW max torque 11,000 Nm (up to 85 rpm) max. speed 2500 rpm Rapid traverses: X; Y axis: 15 m/min W; Z - axis: 10 m/min Attachment ...