used IMA for sale

Manufacturer: IMA, Ersatzteil aus Maschine: COMBIMA, Rollendurchmesser max-mm: ca 600, Rollenstärke max-mm: 60, Magazinschächte : 6, Vertikal: yes, Movable: yes, pneumatisch ansteuerbar: yes,

Manufacturer: IMA, Ausführung rechts: yes, Steuberbar: yes, Tracing by roller: yes, Wechselstähle: yes, Wendemesser: yes, ziehend: yes, Bauhöhe: Kettenbahn 210 mm, Zustand: gut, Bauhöhe: Kettenbahn 210 mm,

Manufacturer: IMA, Spare part from machine: IMA AVM, Type: Verleimteil, Gluing part left side: yes,

Manufacturer: IMA, Type: BIMA 610-2H, Year: 1996, Control: num, Working range X: 7000, Working range Y-axis: ca. 1150, Working range Z: 200, C axis: no, Number of milling spindles vertical: 2, Tool adaption system: HSK 63, Milling engine 1 hours power: 7,5, rpm 1): 1800-24000, Milling engine 2 hours power: 7,5, rpm 2): 1800-24000, Tellerwechseler: yes, Number of tools per tool-magazine: 2 X 12, Mitfahrender Werkzeugwechsler: yes, raster table: yes, 4 station allocation: 8, Vacuum pumps m³/h: 250, Werkstückspannsystem: schablone, machine ready for demonstration: yes, Year :1996

Manufacturer: IMA, Spare part from machine: Vorschmelzbehälter, Type: für Verleimteil,

Manufacturer: IMA, Type: Man.Kantenanleimer HKA, Min-max edge material mm: 0,4-3, Work piece width min-max mm: 100, Min.-max. workpiece length in mm: 100, Edgeband height max mm: 16-45, Min-max feed m/min: 0,7-1,2,

Manufacturer: IMA, Spare part from machine: Compact, Type: Verleimteil, Roller size: 0,8 l, Gluing part left side: yes,

Manufacturer: Homag Sonderverleimteil<CRLF>Schrägkante, Spare part from machine: Homag, Type: Verleimteil, Year: 1999, Year :1999

Manufacturer: IMA, Spare part from machine: IMA AVM, Type: Verleimteil, Gluing part left side: yes,

Manufacturer: IMA, Spare part from machine: IMA Compact, Type: Verleimteil, Gluing part left side: yes,

Manufacturer: IMA, Spare part from machine: Compact, Type: Verleimteil, Roller size: 0,8 l, Gluing part left side: yes,

Manufacturer: IMA Fräsständer tastend, Type: VS.40.09.-2, FREETEXT1: 2 Motore tastend, FREETEXT2: 1 Kw, FREETEXT3: 133 Volt, FREETEXT4: 11500 Umin, FREETEXT5: 200 Hertz,

Manufacturer: IMA Verleimteil aus Combima, Tankvolumen Liter: 1, FREE TEXT: Verleimteilhöhe 60 mm/,

Manufacturer: IMA Verleiteimteil gereinigt, Spare part from machine: IMA Combima, Gluing part left side: yes, Tankvolumen Liter: 1, Min-max height of gluing part mm: 60 mm,

Manufacturer: IMA Ersatzteil Combima, Type: Verleimteil, Tankvolumen Liter: 1,

Manufacturer: Perske, Year: ca 1993, Type: Umformer, KVA: 7,5, Year :ca 1993

Manufacturer: IMA OBK, Type: OBK, Year: 1996, Premilling: yes, Profile milling: yes, Profil sanding: no, Edgeband thickness max mm: 60, Thickness of coiled edgeband max mm: 1, Panel length min mm: 300, Work piece thickness min mm: 100, Feeding speed max m/min: 5-30, Machine lenght mm: 11000, Pressure zone star: yes, Pressure zone exchange system: 4-fach, Strip magazin: no, Trimming saw: yes, Flush milling: yes, Scraper: yes, Buffing unit: 2 Stück, Glue system granulate/cartridge: granulat, Spraying device: yes, Noise enclosure: yes, Compressed air bar: 6, Maschine kann vorgeführt werden , Year :1996

Manufacturer: IMA, Type: Vorschubgetriebe, Year: 1993, FREETEXT1: aus IMA Combima 1993, FREETEXT2: FDR 132S/4 Q B60, FREETEXT3: 1440 U/min, FREETEXT4: 5 kw, Year :1993

Manufacturer: IMA, Type: Schwabbeln einfach, Year: 1993, FREETEXT1: aus IMA Combima, Year :1993

Manufacturer: IMA , Type: doppelseitiges Schwabbeln, Year: 1993, FREETEXT1: aus IMA Combima, FREETEXT2: 4 Fach Polierbürste, FREETEXT3: ca. 0,5 kw, FREETEXT4: Bestückung scotch-Sisal, Year :1993

Manufacturer: Perske, Year: ca 1993, Type: Umformer, aus Maschine: IMA Combima, KVA: 15, Year :ca 1993

Description: Max. edge thickness 30 mm Max. forward feed speed 20 m/min Pressure with rubber belt Panel support guides , with positioning by NC , NO. PANEL SIZING / MILLING UNITS 1 Unit : pre-milling unit Constructor model : 08.376 automatic timed intervention , motor power : 3 KW r.p.m. : 12000 RPM Edge coil magazine glue pot for EVA hot melt glue premelter for EVA hot melt glue no. pressure roller 9 with positioning by NC , NO. EDGE PROCESSING UNITS 1 Processing Unit : end trimming no. motors : 2 NO. EDGE PROCESSING UNITS 2 Processing Unit : top and bottom rough trimming no. motors : 2 motor power : 1.85 KW r.p.m. : 11500 RPM NO. EDGE PROCESSING UNITS 3 Processing Unit : fine trimming to trim and round no. motors : 2 motor power : 1 KW r.p.m. : 11500 RPM NO. EDGE PROCESSING UNITS 4 Processing Unit : Corner rounding no. motors : 2 with positioning by NC , motor  ...

Description: Max. panel height 60 mm Min. panel length 130 mm Min. panel width 65 mm Min. edge thickness 0.4 mm Max. edge thickness 3 mm Max. forward feed speed 30 m/min Pressure with rubber belt No. Panel Sizing / Milling units , Unit : pre-milling unit Constructor model : R3 L20 motor power : 4 KW r.p.m. : 9000 RPM Lamps to preheat the side of the panel , Edge coil magazine , no. positions 2 glue pot for EVA hot melt glue , premelter for PUR glue , Roller set to press the edge , no. pressure roller 5 No. Edge Processing Units 10 Processing Unit : end trimming Constructor model : 8,42/39/B no. motors : 2 Processing Unit : fine trimming to trim and round Constructor model : 08.055 Processing Unit : Corner rounding Constructor model : 08.342 Processing Unit : edge scraping Processing Unit : belt sanding Constructor model : 08.62 Processing Unit : belt sanding Const ...

Description: Max. panel width 3300 mm Min. edge thickness 0.4 mm Max. edge thickness 3 mm Max. forward feed speed 30 m/min Conveyor Track with dogs , Pressure with rubber belt NO. PANEL SIZING / MILLING , Unit : scoring unit motor power : 4.4 KW r.p.m. : 6000 RPM NO. PANEL SIZING / MILLING , Unit : double chipper, top and bottom Constructor model : 75.30 NO. PANEL SIZING / MILLING , Unit : miller hogger NO. PANEL SIZING / MILLING , Unit : miller hogger Edge coil magazine , no. positions 2 glue pot for EVA hot melt glue , premelter for EVA hot melt glue , Roller set to press the edge , no. pressure roller 5 No. Edge Processing Units , Processing Unit : end trimming Constructor model : 08.412 no. motors : 2 Processing Unit : fine trimming to trim and round Constructor model : 08.055 no. motors : 2 Processing Unit : Corner rounding Constructor model : ...

Description: - Edge banding machine - Serial number 02352 - Total installed power 21 KW - Edge thickness from 0.40 mm up to 12 mm - Workpiece thickness from 10 mm to 45 mm - Minimum workpiece length 150 mm - Feed motor 2.20 KW - Control system - IMA 08.376 joint trimming unit, 2 x motor 3 KW-12000 rpm - IMA 283.08 Gluing unit with pot for granulated hot melt adhesive - Pressure unit with (1+5) rollers - IMA 08.415 Cross-cut unit, 2 x motor 0.66 KW-11100 rpm, swivels up to 8° - IMA 08.0555 Rough trimming unit, 2 x motor 1.80 KW-12000 rpm (upper motor missing) - IMA 08.346 Profile trimming unit, 2 x motor 0.50 KW-18000 rpm - IMA 08.519 Profile scraper unit - Flat scraping unit - Milling unit, motor 2 KW-12000 rpm - IMA 08.612 Edge buffing unit, 2 x motor 0.25 KW-1320 rpm IMPORTANT: The return system shown in the photos is NOT included in the scope of delivery Approx. Onsite Dimension.  ...

Description: High-perfomance Edegbanding machine with PU-gluing and return conveying system. Worked only for approx. 1 year in single-shift workshop: infeed area with long infeed fence, 5-roller infeed unit and squared infeed table (500 x 500 mm) with controlled fence. Spraying unit for separating agent top/bottom. per-milling unit 2 x 4,5 kW ,incl. horizontal positioning controlled gluing unit with PUR-pre-melter BALTI Dual Pur. 2 times automatic glue-quantity dosing. 6-roll pressure zine, per-heating table pre-milling unit for premilling of edge projection on the top side snipping unit 2 x 600 W with automatic lateral scanning and pneumatic inclination 0 and 25° rough trimming unit 2 x 1,85 kW with HSK-25 retainer corner rounding unit KFA x30 - 0,5 kW mit HSK retainer multi profile scraping unit flat scraping unit buffing unit return conveying system Feddback 100 for ma ...

Description: • Edgebander with return system • Serial number 10347 • Edge thickness in strips up to 12 mm • Edge thickness in roll up to 3 mm • Worpiece thickness up to 40 mm • Adjustable feed speed from 5 m/min up to 25 m/min • Feed motor 5.50 KW • Joint trimming unit, 2 x motor 3 KW • Edge feeder for strips and roll, edge magazine for 6 edge coils • Gluing unit for PUR glue • Pressure group with (1+5) rollers • End trimming unit, 2 x motor • Rough trimming unit, 2 x motor 1 KW • Profile trimming unit, 4 x motor • Profile scraping unit • Flat scraping unit • Edge buffing unit • Milling group • Return system with inclined air table and dimensions 2020 x 1000 mm, motorized belt conveyor with useful dimensions 9000 x 1200 mm, inclined roller conveyor with dimensions 2500 x 1200 mm Approx. Onsite Dimension. (l x w x h): 12,275 x 3,800 x 2,570 mm, weight ...

Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine -electrically heated -7x heating rods a 800 WATT -reconditioned by FavFE-MA-TECH -2x glue basins available -Price: per piece -Dimensions: 190/100/H125 mm -Weight: 3 kg/piece

size of incoming product: 32 x 122 x 164mm final product size: 130 x 170 x 208mm speed : 25cpm These machines are brand new and have been used for 8 months in two shifts of 5 days a week.

width 3200 mm Panel feed by chains, chain width 80 mm Feed speed max ? m/min, 4 kW Dogs every 11 cm. Equipment: 1+1 Jump scorer 1+1 Hogger 1+1 Jump shaper 1+1 Jump shaper 1+1 Jump shaper 1+1 Jump shaper