used INDEX for sale

turning diameter 620 mm turning length 1500 mm control Siemens 808D spindle bore 100 mm turning diameter over slide 420 mm spindle turning speed range 10 - 4000 U/min main drive 41 kW rapid traverse speed 10000 mm/min total power requirement 65 kW weight of the machine ca. 9 t dimensions of the machine ca. 6,4 x 3,0 x 2,5 m Control unit CNC Siemens 808D new Drives/Servomotores, 24 month warranty on equipment - Chip Conveyor - Tool cooling system - Tailstock - Tool changer (Tower) with 8 positions OPTIONAL INCLUDED - - piece support (Lunete) The machine is completely upgraded

Inv. Num. : 6160 Type: GE 42 NC Producer: INDEX Generated: Parameters: Control system: Siemens Maximum turning length: 360 mm turning diameter: 300 mm Minimum spindle speed: 31.5 1/min Maximum spindle speed: 6000 1/min Total power requirement: 35 kW Equipment: Bar loader

INDEX GSC 65 CNC Lathe YOM 1997, installed 1998 Turning diameter in chuck 250 mm Swing Ø above bed, max. 300 mm Turning length 400 mm Control: Index C 200-8 (Sinumerik 880) Axes X/Z/C Travel of Slides: Turret 1- X / Z travel 163 / 550 mm Turret 2- X / Z travel140 / 250 Spindle bore, approx. 65 mm Tool holder bore 30 mm Spindle speeds 25 - 5000 rpm Feed range 0 - 15000 rpm Spindle drive 0.5 - 40 kW Total electrical load 60 kW - 380 V - 50 Hz Weight, approx. 8,500 kg Accessories & Spare parts -SIEMENS CNC Continuous Path Control, Model 880 (INDEX C 200-8). Changed monitor. -Hydraulic high-power chuck ROHM HS 200/3 -Tailstock -Turrets: 3 -Rotation tools in Turret 1- 2, in Turret 2- 3. -Milling spindle- tool in Turret 2 -Tool stations: 8 / 12 / 8 + 28 tools in magazine -Coolant device with chip conveyor. -A lot of spares and accessories

Curve lathe INDEX B60 - not complete - as spare part dispenser - see pictures

see picture

Curve lathe INDEX ER60 - see pictures More: turnover machine MANURHIN Traminer TR22B

see pictures

various INDEX tool holders according to the list

7 pcs. Index VD30 mounts with Capto interface, 3 pcs. powered by it, mint condition!

Type tandem with 2 workrooms Control: SIEMENS Sinumerik max. turning Ø: 200 mm Travels: X= 520, Z= 200 mm Revolver with 14 stations Conveyor

Machine Details Warehouse number 1105-03632 Machine type CNC turning and milling center Make INDEX Type G 200 Year of construction 1997 Control type CNC Controller C200- Siemens 840 C Storage location FRANCE Country of origin Germany Delivery time immediately Freight base from location Technical details Turning diameter 200 mm Turning length 400 mm Controller C200- Siemens 840 C Circulation diameter 420 mm Rod diameter 65 mm Chuck diameter 165 mm Speed range - spindle ~ 6,000 rpm Drive power - Spindle motor 100% ED= 7.5/13/20 kW Drive power - Spindle motor 40% ED= 13.3/22/29 kW Rod diameter 65 mm Spindle bearing diameter 100 mm Chuck diameter 165 mm Speed range - spindle ~ 6,000 rpm Drive power - spindle motor 100% ED= 7.5/13 kW Drive power - Spindle motor 40% ED= 13.3/22 kW C - axis 0.001 ° Number of revolvers 2. Turret head (x-fold) 2 x 14 pos Travel - x ...

Used multi-spindle machine INDEX MS36E built in 1996 including a lot of accessories (collets, synchronizer guns, interchangeable wheels, various working curves, etc.) The plant is virtually ready for dispatch, in a dismantled state for inspection. For photos, technical data and a list of accessories, see Appendices. It has no major defects, is basically ready for operation, only the rubber hoses should be changed before commissioning and the coolant-lubricant system should be thoroughly cleaned and rinsed throughout. Accessory listing MS36E Iemca Loading Magazine Oil filter system (+3 rolls of filter paper) Collets Synchronizer Clamps (sentences) Ø 24 Ø 16 Ø 26 Ø 20 Ø 27 2x Ø 23 Ø 28 2x Ø 26 Ø 30,5 2x Ø 27,5 Ø 31 Ø 32 div. jaws Ø 33 for 3-jaw chuck Ø 34 Ø 36 SW 24 1x spindle stop (currently layer 4) 3 sets of rod guide tubes Various reductions f ...

Index HE 25 with rod feed hydraulically controlled with long turning device

FANUC Control 32iB max. swivel Ø 380 mm max. turning length 600 mm Spindle passage 65 mm Chuck diameter 250 mm Spindle speed 4,000 rpm REVOLVER 1 Travel: X= 220 (+60/+280), Y= 150 (+/- 75), Z= 600 mm Stations 14, powered 7 Speed driven stations 6,000 1/min MULTIFUNTIONsREVOLVER Travel X= 110 (+85/-25), Z= 650 mm Stations 10, including 7 fixed places (VDI 30) 3x UniFlex superimposed tools Tailstock Handling system FMB unirobot M-10iA-12-7P, year 2017

- Control: Sinumerik (Index C200-4D) - Rod passage 65 mm - Speed 5000 1/min - Turret 1 with 8 stations (all driven), incl. synchronous spindle - Turret 2 with 6 stations (all driven) - Revolver 1/2 travel: X1= 90, Z1= 290 mm X2= 81, Z2= 80 mm - Back processing 5 Rear Drilling Stations - C axis -Conveyor Machine weight approx. 3000 kg Footprint including control cabinet and chip conveyor: LxWxH: 3430 x 1240 x 1750 mm Loading magazine: INDEX MBL Weight: approx. 2,000 kg Dimensions LxWxH: 4500x1100x1500 mm

BRAND: INDEX YEAR: 1996 MODEL: G200 APPLICATION TYPE: TURNING LOCATION: AUSTRIA MACHINE TYPE: LATHE AVAILABILITY: IMMEDIATELY Technical Information CONTROL UNIT BRAND: SIEMENS MODEL: C200-4 D Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - HSP & GSP Ø 60MM REV 1 X,Y,Z,B, / WITH WAN AND MILLING SPINDLE REV 2 X,Z WITH WAN DRILL BREAKAGE CONTROL REV 1 & 2 - GANTRY REMOVAL DEVICE - THE MACHINE HAS BEEN RUNNING WITH A 65 CLAMPING POT

BRAND: INDEX YEAR: 1998 MODEL: MS 42C APPLICATION TYPE: TURNING LOCATION: ITALY MACHINE TYPE: LATHE AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MEASUREMENTS WIDTH: 7200 MM MEASUREMENTS DEPTH: 1700 MM MEASUREMENTS HEIGHT: 2300 MM MACHINE WEIGHT: 11000 KG CONTROL UNIT BRAND: INDEX MAIN DRIVE NUMBER OF SPINDLES: 6 SPINDLE SPEED RANGE: 5000 1/MIN Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - MAX. BAR DIAMETER : 42 MM

Automatic ring lathe from Keul - Rotary Ø: 1.0 - 8.0 mm - Gripping and swivel device - Part discharge position 1 - Machining unit position 1 - Roll straightening unit -Conveyor - Reel Ø 1200 mm, 1,000 kg

Index GFG 450, Built in 1996, Control Index C 200 - 4, Travel X/Z 430/545 mm, Circulation Ø over bed carriage max. 425 mm, Bar passage 100 mm, 2 revolvers 8-speed / 6-speed, turret 1 powered tools, Recording VDI 50 , C axis 0.001°, Conveyor 4-stage transmission up to 2,250 rpm, Three-jaw chuck 315-82, Full-clamping cylinder OVS 150, Accessories

Control: Fanuc 32i Rotary memeser 380 mm Main spindle D=65mm Speed 4000 rpm Holding brake C-axis Tool carrier 1 X/ Z axis 220/ 600 mm working distance Tool carrier 1: 14 shots (VDI 30)/ 7 attached Tools Tool carrier 2 X/Z axis 110/650 mm working distance Tool carrier 2: 7 shots (VDI 30) + 3 UniFlex -52 Tool measurement ATC Chip-federals

Index G200 bar lathe :::SPECIFICATIONS::: CNC Model: Siemens CNC version: Index C 200 - 4 Main spindle nose: ASA 6 Main spindle bar clearance: 60mm Turning diameter: 150mm Turning length: 400mm Main spindle revolutions: 5000 Number of Tool Turrets: 1 Number of tool places before turret: 14 Number of motorized first turret: 14 First turret tool attachment type: VDI 25 X axis travel first turret: 155mm Y axis travel first turret: +-60mm Z axis travel first turret: 400mm Model and brand bar magazine: LNS Hydrobar L 3000 mm Tailstock: yes Positioning: automatic Chip evacuator: carpet Other technical data: The tailstock has a programmable axis Machine equipment: Rich equipment: Motorized and fixed tool holder sets Hainbuch pliers Self-centering forkardt :::D IMENSIONS AND WEIGHT::: Weight: 4800Kg

Tool holder collet fixed for index G300 (VDI30) Condition: Used Set consisting of: 14 pieces of drill rod holder 24 pieces of turning steel brackets 2 pieces of detour

Tool holder fixed for Index G300 (VDI30) Condition: Used Set consisting of: 14 pieces of drill rod holder 24 pieces of turning steel brackets 2 pieces of detour

Tool holder driven for index G300 (VDI30) Condition: Used Set consisting of: 10 pieces of straight tool holders (1 piece more as seen in the picture) 14 pcs angle tool holder

- - -: - - - - - - - - -: - - - - - - - - -: - - - - - - CNC Turning- and Milling Center | INDEX - ABC equipped with bar loader. The machine is in a very well-maintained condition and can be inspected at any time under power. Technical data of the machine will follow soon. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

travel -x axis: 140 mm travel -z axis: 710 mm control: Siemens C 200-4 main spindle speeds: 5.000 U/min bore diameter: 65 mm numbers of positions in the tool changer: 24 (2x12) CNC Turning- and Milling Center | INDEX - G300 + 2 turret + tailstock + bar feeder: Index MBL 65 Scope of delivery: - tool holder fixed The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. A machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: G 300 | G-300 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

work travel: X:320 & Z:1250 mm rapid traverse: X:20 & Z:40 m/min control: INDEX - C200-4D --- MOTOR MILLING SPINDLE ---: ------------------------- tool taper: HSK A63 turning speeds: 12000 U/min Power: 27,5 KW front bearing: 80 mm turning speeds: 3000 U/min MAIN SPINDLE D102 direct drive: ------------------------- spindle diameter in front bearing: 1200 mm spindle passage: 102 mm forward bearing diameter: 170 mm CNC Turning- and Milling Center | INDEX - G400 S-1/300 The machine is in a very good condition with only 2500 H main working hours. + MARPOSS probe The machine is in a well-maintained condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: G400 | G 400 | G400 S1 300 | G400S1 300 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. turning speeds: 10.000 U/min. chucking diameter: 130 mm spindle diameter in front bearing: 70 mm numbers of positions in the tool changer: 12 toolpiece turning speed range: 6.000 U/min Vertical Turning Machine | Index - V100 Equipment: - coolant device, - integr. Chip conveyor: Knoll - 320S-1/160 (year 2001) - all-round workpiece carrier system: Schnaithmann (built in 2000) - all-round buffer belt, - Control cabinet, with cooling unit: Rittal The machine is in very good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: V-100 | V 100 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. turning speeds: 10.000 U/min. chucking diameter: 130 mm spindle diameter in front bearing: 70 mm numbers of positions in the tool changer: 12 toolpiece turning speed range: 6.000 U/min Vertical Turning Machine | Index - V100 Equipment: - coolant device, - rotating workpiece transport system, - Chip filter: Knoll-320S-1 (built in 2001), - all-round buffer belt, - Control cabinet, with cooling unit: Rittal The machine is in very good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: V-100 | V 100 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle passage: 36 (42) mm turning length: max. 280 mm control: C200-4 / 840C Siemens Main spindle:: turning speed range - main spindle: max. 6.300 min/-1 power capacity - main spindel: 13 / 21 kW max. Torque: 62 / 102 Nm spindle diameter in front bearing: 85 mm spindle hollow: 36 mm C-Axis: 0,001 ° Subspindel:: Spindle speed range subspindle: max. 4.500 min/-1 max. Torque: 10 Nm clamping diameter: max. 42 mm clamping length max.: 38 mm spindle bore: 15,5 mm Turret 1:: number of toolpositions: 8 pos. shaft cross cut: 25 x 48 DIN 69880 change-time tool to tool: 0,2 sec travel -x axis: 90 mm travel -z axis: 280 mm Feed force: 5,5 kN rapid traverse: 24 m/min Driven Tool Positions:: 8 Spindle speed - driven tools: 6.000 min -1 power capacity - driven tools: 3,3 kW max. Torque: 7,5 Nm Backside processing:: Fixed tools max.: 5 pos Turret 2:: number of toolpositions: 6 pos. travel -x axi ...

spindle passage: 60 mm cross-slide: 4 turret head: 6 Pos. thread cutting attachment: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle passage: 25 mm turning speeds: 5750 U/min Rest: 4 straight turning atchm. - working travel: . mm turret head: 8 thread cutting attachment: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle passage: 25 mm turning speeds: 5750 U/min Rest: 4 turret head: 8 thread cutting attachment: bar loader: LNZ Hydrobar type: 6.26HS-4.4 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle passage: 25 mm turning speeds: 5750 U/min Rest: 4 straight turning atchm. - working travel: . mm turret head: 8 thread cutting attachment: bar loader: LNZ Hydrobar total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle passage: 25 mm turning speeds: 5750 U/min Rest: 4 straight turning atchm. - working travel: . mm turret head: 8 thread cutting attachment: bar loader: LNZ Hydrobar type: 6.32HS-4.4 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle passage: 25 mm turning speeds: 5750 U/min Rest: 4 turret head: 8 thread cutting attachment: bar loader: LNZ Hydrobar total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle passage: 25 mm turning speeds: 5750 U/min Rest: 4 turret head: 8 thread cutting attachment: bar loader: LNZ Hydrobar total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

machine: 15 Pos. accessories:: Pos. electric measuring devices: 1 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning length: 2010 mm control: Siemens 840D turning diameter over slide rest: 320 mm spindle passage: 100 mm Tool changer: turning speeds: 10-2800 U/min transmission ratio: 4 chip conveyor: steady: 240 mm tail stock: 3-jaw-chuck diameter: 400 mm main gear-box motor: 55 kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 580 mm turning length: 1600 mm control: Siemens 810 T turning diameter over slide rest: 320 mm spindle passage: 85 mm Tool changer: turning speeds: 12,5-4000 U/min transmission ratio: 4 chip conveyor: 3 jaw chuck Forckrath: 315 mm steady: 170 mm tail stock: total power requirement: 53 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 600 mm turning length: 1500 mm control: C200 T turning diameter over slide rest: 425 mm spindle passage: 100 mm Tool changer: live tooling: turning speeds: 10-2800 U/min transmission ratio: 4 chip conveyor: 3 jaw chuck Forckrath: 315 mm steady: tail stock: c-axis: total power requirement: 53 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 280 mm turning length: 800 mm control: Siemens type: 840 D c-axis: live tooling: Tool changer: turning speeds: 4000 U/min swing diameter: 320 mm 3 jaw chuck Forckrath: 250 mm tail stock: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle passage: 34 mm turning length: . mm bore depth: . mm Control: Index type: S 3 live tooling: bar loader: Sameca total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 440 mm turning length: 1500 mm control: C 200 Tool changer: 16 3 jaw chuck Forckrath: 500 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle passage: 60 mm cross-slide: 4 turret head: 6 Pos. thread cutting attachment: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 200 mm turning length: 400 mm control: Siemens type: C 200-4 840 C spindle passage: 65 mm Tool changer: 2 x14 Pos. Turret 12-fold, 12 stations: c-axis: live tooling: 2x Revoler total power requirement: kW weight of the machine ca.: 4 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 300 mm turning length: 360 mm control: Siemens S3 T swing diameter: 370 mm Tool changer: 14 Pos live tooling: turning speeds: 25-4000 U/min transmission ratio: 2 total power requirement: kW weight of the machine ca.: t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 300 mm turning length: 360 mm control: Siemens S3 T swing diameter: 370 mm tail stock: Tool changer: 14 Pos total power requirement: kW weight of the machine ca.: t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 80 mm turning length: . mm control: Siemens C 200 tool change unit: 14 live tooling: swing diameter: 130 mm spindle passage: 42 mm turret head: 2 total power requirement: kW weight of the machine ca.: t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle passage: 25 mm turning speeds: 5750 U/min Rest: 4 straight turning atchm. - working travel: . mm turret head: 8 thread cutting attachment: bar loader: LNZ Hydrobar total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.