used kern engine lathes sliding surfacing and screw cutting lathes

Specifications: Center height: 230 mm Center width: 1000 mm Circulation diameter over bed: 475 mm Circulation diameter over bed slide: 320 mm Spindle bore: 50 mm Bed width: 300 mm Speeds: (18) 25 - 2240 1/min Motor power: 3.5 / 6 kW, 2-stage Tailstock mount: MK 4 Quill stroke: 120 mm Longitudinal feed: 0.06 - 0.8 m/rev Transverse feed: 0.044 - 0.6 m/rev Weight, approx.: 1800 kg Dimensions (wxDxH), approx.: 2560 x 1200 x 1710 mm Equipment: - 3-axis digital display, brand: Heidenhain - 3-jaw lathe chuck ø 315 mm with reversible jaws - Quick-change holder System Multifix - Rotating grain tip - Lathe chuck protection with limit switch protection - Emergency stop push button - Coolant device - Machine light - Chip pan

The machine was partially overhauled. Built in 1981 Specifications: Center height: 220 mm Center width: 600 mm Spindle bore: 50 mm Bed width: 300 mm Speeds: 31.5 - 1400 rpm Feeds: Longitudinal slide: 0.06 - 0.8 mm/rev Axial slide: 0.044 - 0.6 mm/rev Tailstock mount: MK 4 Gahvxg7a Quill stroke: 120 mm Motor power: 4 kW Weight, approx.: 1500 kg Dimensions (WxDxH), approx.: 2150 x 1100 x 1750 mm Equipment: - 3-axis digital display, Heidenhain brand - 3-jaw lathe chuck - Lathe chuck protection with limit switch protection - Quick-change holder System Multifix - Tension spindle cover - Emergency stop push button - Coolant device - Machine light The following work was carried out: - Machine partially disassembled - Damaged bearings replaced - Guides ground in X- and Z-axis - Tool holder of the tailstock quill ground - Wiper renewed - Partial handwheels r ...

The machine was partially overhauled. Specifications: Center height: 220 mm Center width: 600 mm Spindle bore: 50 mm Bed width: 300 mm Speeds: 31.5 - 1400 rpm Tailstock mount: MK 4 Quill stroke: 150 mm Feeds: Longitudinal slide: 0.06 - 0.8 mm/rev Axial slide: 0.044 - 0.6 mm/rev Motor power: 4 kW Weight, approx.: 1500 kg Dimensions (WxDxH), approx.: 2150 x 1100 x 1680 mm Equipment: - 3-axis digital display, Heidenhain brand - 3-jaw lathe chuck, brand Forkardt 200 mm - Quick-change holder System Multifix - Tension spindle cover - Lathe chuck protection with limit switch protection - Machine light - Coolant device The following work was carried out: - Machine partially disassembled - Damaged bearings replaced - Guides ground in X- and Z-axis - Tool holder of the tailstock quill ground - Wiper renewed - Partial handwheels renewed - Glass scales overhaule ...

The machine was partially overhauled. Specifications: Center height: 220 mm Center width: 600 mm Spindle bore: 50 mm Bed width: 300 mm Speeds: 31.5 - 1400 rpm Tailstock mount: MK 4 Quill stroke: 150 mm Feeds: Longitudinal slide: 0.06 - 0.8 mm/rev Axial slide: 0.044 - 0.6 mm/rev Motor power: 4 kW Weight, approx.: 1500 kg Dimensions (WxDxH), approx.: 2150 x 110 x 1750 mm Equipment: - 3-axis digital display, Heidenhain brand - 3-jaw lathe chuck, brand Forkardt 200 mm - Emergency stop push button - Quick-change holder System Multifix - Tension spindle cover - Lathe chuck protection with limit switch protection - Machine light - Coolant device The following work was carried out: - Machine partially disassembled - Damaged bearings replaced - Guides ground in X- and Z-axis - Tool holder of the tailstock quill ground - Wiper renewed - Partial handwheels rene ...

Offer 24226 Specifications: - Largest circulation – Ø over bed 560 mm - via flat slide 380 mm - Center height 280 mm - Center width 2000 mm - Spindle bore 65 mm - Pick-up cone of the tailstock quill MK 6 - 20 spindle speeds 12 - 1200 rpm - Feeds - longitudinal -plan - Drive 400 V / 12 kW - with: - 3 axis digital display - Jaw chuck, SWS steel holder, tailstock - Coolant device, - Space requirement approx. W 4000 x H 1800 x D 1400 mm - Weight approx. 3000 kg

Specifications: Tip height: 215 mm Center width: 600 mm Spindle bore: 50 mm Bed width: 300 mm Speeds: (24) 16 - 1400 1/min Motor power, 2 stages: 3.5 / 6.0 kW Feeds: Longitudinal slide: 0.06 - 0.8 mm/rev Face slide: 0.044 - 0.6 mm/rev Tailstock mount: MK 4 Quill stroke: 150 mm Dimensions (WxDxH), approx.: 2170 x 1180 x 1600 mm Equipment: - 3-axis digital display, brand: Heidenhain - 3-jaw lathe chuck, brand: Röhm ø 200 mm - Emergency stop push button - Quick-change holder System Multifix - Machine light - Coolant device - Guide and pull spindle safety device - Automatic lubrication for support - Moving center punch

Lathe Core Three-jaw chuck Multifix B 2 Holder Spindle bore 52 mm Speeds 38 - 1900 rpm Steels Chuck Sharpen 380 V 25 A Length 2.80 m Width 1.00 m Height 1.60 m

Turning diameter: 280 mm Turning length: 500 mm Turret positions: 8 CNC Brand: Heidenhain CNC latheDMT KERN - CD 280 MACH-ID 8536 Make: DMT KERN Type: CD 280 Year: 2003  8 Position revolver Vdi Heidenhain manuel plus Steady rest Large tooling package Collet device with inserts Forkardt 3 Chuck Swing over bed Ø:        280mm Swing over cross slide Ø:140mm DBC Turning Length:      500mm Spindle bore:            41mm Spindle power:           11,5kW Tailstock spindle Ø:     50Ø Stroke pinole:           120mm Spindle taper:           3Mk Speeds / ranges:         Vario 0 - 4500Rpm Feed rate X-Axis:        2000mm/min. Feed rate Z-Axis:    ...

Control Heidenhain Manual Plus Turning diameter over bed 280 mm Center width 500 mm Spindle speed 5000 min-1 8-speed rear turret Tailstock Various tool holders

Controls: HEIDENHAIN TNC 426, connected load: 7.7kW, including Rotator 3R WorkPal, with documentation, without spare parts.

PRECISION SCALE Ser. No.: WF131434 Readability (d) : 0,01 g Weighing range (max) : 3000 g Reproducibility : 0.01 g Linearity : ±0,03 g Smallest part wight for piece counting : 20 mg Reference quantities at piece counting: 10, 20, 50, 100, 200 Weighing Units: g, ct, Ib, oz, d, ozt, dwt, mo, tl h, tl c, tl t, t, bt, n Recommended adjustment weight, not added (class): 3000 g (F1) Warm-up time: 2 hours Stabilization time (typical): 3 sec Operating temperature : + 5° C .... + 35° C Humidity of air: max. 80 % (not condensing)

Used KERN K980 paper-endless cutting machine. The continuous cutter meets all the requirements of computer printout processing at maximum speed. The proof is 34,200 high-quality cuts per hour.

Control: HEIDENHAIN Manual Plus max. turning diameter over bed: 340mm max. turning diameter over slide: 150mm max. turning length turning length: approx. 580mm Wheelbase: 750mm Spindle bore: 52mm max. main spindle speed: 1 - 4,000 rpm Main spindle DIN 55027 Bayonet: Wedge bar chuck FN RHU-200 Collet by hand: F48 8-fold SAUTER tool turret Tool holder: VDI-16 Tailstock with quill diameter: 60mm Travel: 140 mm Tool cone: Mk 4 Space requirement L x W x H: approx. 2.50 x 1.60 x 1.70 meters Dimensions control cabinet L x W x H: approx. 1.25 x 0.5 x 1.7 meters Machine weight: approx. 2'400kg Note: This machine is not located in Schijndel, but in Eersel.

1 KERN high precision Micro 5 Axis CNC Milling & Drilling machine type HSPC 2216, year 1997, serial number 352, HEIDENHAIN type TNC 426 PB CNC 5-axes contouring controller, polymer concrete monobloc machine frame, working ranges X 220mm, Y 160mm, Z 248mm, electro pneumatic tool changer, magazine for 32 tools, tool changing time approx. 3,0 sec., mid chip-to-chip period approx. 7 sec., brushless and digital drive system travel speed 6.000 mm/min., Z-axis protection by s/s lamelles, half-round sliding door offering a maximum of operator handling comfort, standard chip tray for protection of the X and Y axis, with HEIDENHAIN electronic handwheel type TNC 426 for manual adjustment of the axes, Table 365 x 240mm, Max Clamping area 350 x 230mm, Max workpiece weight 40Kg, 4th & 5th Axis attachment, Fischer Precise Spindle 42,000rpm, 2.6Kw, HSK25E Tool Adapter,  ...

Stock number: 3736 PROCESSING Manufacturer: KERN, Type: HSPC 25-16 Machine NO.: 436, Year of construction: 2000 Specifications: Longitudinal movement (X) 250 mm Transverse movement (Y) 220 mm Spindle speeds 35000 rpm Total power 10 kW A-ash B: Aschse Grad Control HEIDENHAIN 426 M Fabr. Controlled in axes 3+2 Accessories: CNC rotary table. Cooling water system. Length: 2100 mm, Height: 2300 mm, Width: 1700 mm, Weight: 3500 kg

Vertical 3-axis CNC machining center with nano precision Kern Pyramid Nano Year of construction: 2013 Heidenhain iTNC 530 Table size: 600 x 600 mm Table load: max. 250 kg Longitudinal travel: X 500 mm Transverse travel: Y 500 mm Vertical travel: Z 400 mm Smallest travel increment: 0.1 μm Feeds up to: X/Y/Z 30,000 mm/min. Rapid traverses up to: X/Y/Z 30,000 mm/min. Acceleration: X/Y/Z 10 m/s² Vector-controlled milling spindle: Spindle mount: HSK-25 Spindle drive power: 6.4 kW AC Spindle speeds: 500 - 50,000 rpm. Spindle torque (S1): max. 1.6 Nm Automatic tool changer: Tool magazine positions: 32-fold Tool holder: HSK-E25 Tool Ø (every second place free): max. 60 mm Tool length: max. 160 mm Tool change time: 3 sec. Chip-to-chip time: 6 sec. Machine weight: approx. 8,000 kg Machine height: LxWxH 2,850 x 3 ...

Used chamber filter press equipped for 10 filter plates & 10 filter cloths, pressure switch, pressure gauge, stainless steel cake tray, stainless steel piping, expansion tank, check valve, etc.

Control: Manufacture: Fanuc type: Quick Turn mm turning dia. over bed: 400 mm centre height: 200 mm centre distance: 1000 mm turning dia. over face-slide: 230 mm turning dia. in gap: 460 mm spindle bore: 60 mm spindle taper:: DIN 55027 / Gr.6 spindle turning speed - stepless: 1-3000 U/min tailstock quill taper MT: 4 diameter of quill: 60 mm quill stroke: 120 mm total power requirement: 11 kW weight of the machine ca.: 1.6 t dimensions of the machine ca.: 275 x 140 x 155 cm x cm x cm Quick-change toolholder: Multifix B Number of toolholders: 6 3-jaw chuck: diameter: 200 mm Collet chuck: F48 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Flat belt pulley, toothed pulley, multi-belt pulley, Toothed Pulley -Toothed disk: from a Kern CD 480 lathe -Type: P60-5M -Mount: hollow shaft Ø 25 mm -Dimensions: Ø 103 x 77 mm -Weight: 2.9 kg

Absolute rotary encoders, encoders, rotary encoders, encoders, incremental encoders -Manufacturer: Balluff, Incremental Encoder from Lathe Kern CD 480 -Type: BDG 6360-0-05-W031-2500-65// -Dimension: 100/90/80 mm -Weight: 0.5 kg

Absolute rotary encoders, encoders, rotary encoders, encoders, incremental encoders -Manufacturer: Balluff, Incremental Encoder from Lathe Kern CD 480 -Type: BDG 6360-0-05-W031-1024-65// -Price: complete -Dimension: 100/90/80 mm -Weight: 4,3 kg

Scales, crane scales, hanging scales -Manufacturer: Kern, crane scale hanging scale type HFB 600K200 -Weighing range: up to 600 kg -Readability: 200 g -Power supply: battery operation -Operation: additionally with radio remote control -Dimension box: 240/120/H420 mm -Weight: 2,8 kg

Kern scale, up to 50 kg d=5 gr. 12V500mA with wheeled trolley with storage option Scales 50x40 cm Table 66 cm wide, 80 cm long, 50 cm high. 3 Slide-in Scales complete height 1.30 m

Counting scale, scale, parcel scale, platform scale, industrial scale, digital scale -Manufacturer: Kern, platform scale type EOB 300K100A Ovp -Weighing range: max. 300 kg -Readability: 0.1 kg -Accessories: see photos -Dimensions box: 370/370/H150 mm -Own weight: 4.6 kg

Description Counting scale Kern max load 6 Kg minimum load 100 mg power supply: 12 V (with 220/12 V power supply)