used KOHLER for sale

Rolling motor 5, 6kw GS motor with tachometer and forced-air cooling Maximum band width: 180 mm Maximum belt thickness: 4, 5 mm Number of leveling rollers: 4pcs above 5pcs below

Aggregate type: mobile Execution: Soundproofed Technical data engine: Engine manufacturer: Kohler Engine: KDW1003 Cooling: Water-cooled Occasion: Electric 12 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: LINZ Generator type: Alumen Generator power: 8 kVA Voltage: 400 / 231 Volt Power factor: Cos. - phi 0.9 Speed: 1500 rpm Switchgear: Execution: Key Startup Functions: Hand start Switch: Generator switch 2 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 66 Dimensions of the power unit: Width approx. mm: 1.400 Height approx. mm: 2.500 Length approx. mm: 2.400 Weight approx. KG: 824 Condition: Demonstration machine Year of construction: 2020  ...

Board thickness up to 5 mm, milling width: 3/4/5/6 mm is given by milling cutter. Suitable for card-, micro- and corrugated board. Cutting depth from 0 up to 1 mm adjust by excenter. Deep processing adjust by knurled skrew. Due to separate adjusting of milling depth and deep processing, is it possible to mill the varnish-, cellophane-, aluminium- and PE-coating in a 1/100 mm range. Suitable for any folder gluer.

Kohler unwinding reel with 9 roll straightening unit Last use Align copper L profile from coil, feed profile via balancing section. Specifications Number of rollers: 9 pieces Roll diameter: 30 mm Throughput width: 120 mm Belt speed: 0-10 m/min Belt speed control: Infrared via belt loop Working direction: left to right Belt inlet: left Measuring device: digital Roller mill adjustment: motorized Quick-change device: manual Engines Straightening machine drive: 5, kW drive at 3000 rpm Oil pump: 0.06 kW power at 1300 rpm Roller mill adjustment: 0.15/0.6 kW at 81/344 rpm Total drive power: 10 kW Voltage: 380 V Weight 6 t Unwinding reel type 300.2 Load capacity: 2 x 300 kp Width: 80 mm Spread: manual Spreading range: 750 - 1050 mm Coil outer diameter 1200 mm Brake: Disc brake / pneumatic Page shift: manual Panning: manual HK 120 upright straightening ma ...

Bandwidth 180 mm Plate thickness 2 mm Max. coil weight 2 X 500 Kg Max. coil-diameter 1200 mm Feeding speed 0 - 60 m/min Straightening rolls 30 mm Number of straightening rolls 9 pcs Max. power 6 Kw

Kohler Diesel Generator Set 20 / 22 kVA - NEW E-Start - AVR - 230 / 400 Volt - - - - - Engine: - Manufacturer: Kohler (Italy) - 2 cylinders - Diesel - Air-cooled - Power: 26 hp - 1248 cc - - - - - Generator: - Manufacturer: Linz (Italy) - 20 / 22 kVA - 230 / 400 volts - 50 Hertz - - - - Equipment: - Electric start - AVR controller - 1x 230V 16A socket - 1x 400V 32A socket - incl. hedging - Key start - Voltmeter - Ammeter - Hertz display - Operating hours counter - Low oil pressure warning light - - - - - Other data: - Dimensions: 120 x 62 cm - Weight: 271 kg - Consumption: 4.0 ltr. / h (75%) - - - - - Scope of delivery: - Kohler Diesel Generator Set 20 KVA - with electric start - Start unit - Tank - Exhaust - Battery - Sockets - - - - - Transport: - A Germany-wide transport including unloading by truck with lifting pl ...

Kohler Diesel Generator Set 20 / 22 - NEW E-Start - AVR - 230 / 400 Volt - soundproofed - - - - - Engine: - Manufacturer: Kohler (Italy) - 2 cylinders - Diesel - Air-cooled - Power: 26 hp - 1248 cc - - - - - Generator: - Manufacturer: Linz (Italy) - 20 / 22 kVA - 230 / 400 volts - 50 Hertz - AVR controller (+/- 1%) - - - - Equipment: - Electric start - AVR controller - 1x 230V 32A socket - 1x 400V 32A socket - incl. hedging - Key start - Voltmeter + phase selector switch - Hertz display - Operating hours counter - Emergency stop switch - - - - - Engine control unit: Shutdown / alarm in the event of the following events: - Fuel reserve - Engine temperature too high - Oil pressure too low - Battery voltage not i.O. - Tear from the V-belt - Overspeed / Underspeed - - - - - Other data: - Dimensions: 140 x 70 cm - Weight: 450 kg  ...

material width: 350 mm coil weight: 500 kg material thickness: mm coil external diameter: 1000 mm no. of straightening rolls: 9 straightening roll diameter: 45 mm speed: m/min power requirement: 9 kW Weight: - t Dimensions (WxDxH): - m Decoiler and straightener on one base plate - Straightening machine - decoiler - Control panel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 0400 mm coil outside dia.: 460 - 530 mm weight max. in kg: 2 x 2000 kg plate thickness: 0,40 - 3,00 mm coil outside - diam. ca.: 1500 mm nomb. of straightening rolls: 9 diam. of the rolls ca.: 30 mm speed: 0-40 m/min total power requirement: 15 kW weight of the machine ca.: 5,20 t dimensions of the machine ca.: m - straightening machine type KRE 30.400/9 with infinitely variable drive, motoric adjustment of the roller cassette, rapid clamping device - double decoiler type 2000.2 H with pneumatic lag brake, hydraulic expansion, hydraulic snubber roll - coil loop control via ultrasound The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 0120 mm coil outside dia.: 1200 mm weight max. in kg: 300 kg sheet thickness - max.: 1,00 mm diam. of the rolls ca.: 10 mm nomb. of straightening rolls: 16 diameter of the mandrel: 350 - 530 mm total power requirement: 5,50 kW weight of the machine ca.: t dimensions of the machine ca.: m - Reel and straightener as a combination with a common frame - Manually adjustable reel brake - Coil limiting ring at the front, fixed washer at the rear - Reel can be moved manually laterally - manual reel spreading - side belt – guide rollers with central adjustment at the inlet - manual block adjustment of the straightening mechanism, display via dial gauges - Oil - central lubrication - Loop control via sensor - Speed adjustable via potentiometer - Manually adjustable hold-down roller at the inlet - Large roller basket with cover on the outlet - Free-standing control panel - Lateral a ...

sheet width: 0120 mm coil outside dia.: 800 mm weight max. in kg: 150 kg plate thickness: 1,50 mm diam. of the rolls ca.: 12 mm nomb. of straightening rolls: 16 diameter of the mandrel: 180 - 550 mm total power requirement: 5 kW weight of the machine ca.: t dimensions of the machine ca.: m - Reel and straightener as a combination with a common frame - Manually adjustable reel brake - Coil limiting ring at the front, fixed washer at the rear - Reel can be moved manually laterally - manual reel spreading - side belt – guide rollers with central adjustment at the inlet - manual block adjustment of the straightening mechanism, display via dial gauges - Oil - central lubrication - Loop control via sensor - Speed adjustable via potentiometer - Belt support at the outlet - Free-standing control panel - Lateral adjustment of the reel using a hand crank - Belt support at the outlet The data  ...

sheet width: 0260 mm coil outside dia.: 1200 mm weight max. in kg: 2 x 1000 kg sheet thickness - max.: 2,00 mm nomb. of straightening rolls: 19 diam. of the rolls ca.: 18 mm speed: 0-60 m/min run-in height: 1200-1400 mm sheet thickness - min.: 0,30 mm working direction left - right: ja/yes range of expansion ca.: 360 - 430 + 460 - 530 mm total power requirement: 13 kW weight of the machine ca.: 2,50 t dimensions of the machine ca.: 5,50 x 1,80 x 2,10 m - Speed control ultrasonic via belt loop - Digital measuring device - Motorized roller mill adjustment - Drive motor 8 kW - Hydraulic reel expansion - Pneumatic reel brake - Quick change device for the straightening rollers and support rollers - SIEMENS S5 control - Press inlet height 1200-1400 mm - Electrical plans in the control cabinet - Instruction manual available Dimensions: - Straightener with reel 3.00 x 1.80 x 2.10 m - Tape guide  ...

sheet width: 180 mm coil outside dia.: 1850 mm weight max. in kg: 2200 kg Control: S5 total power requirement: 9 kW weight of the machine ca.: 4 t dimensions of the machine ca.: 4 x 2,5 x 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 100 mm coil outside dia.: 800 mm weight max. in kg: 150 kg speed: 0 - 60 m/min total power requirement: 2 kW weight of the machine ca.: t dimensions of the machine ca.: 2,89 x 1,38 x 1,4 m : 2 x 150 kg band width: 100 mm diameter of the mandrel: min. 170 max. 540 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Engine Brand: JOHN DEERE, Conditie: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Beige , Working Hours: 120 Hour(s), Engine Condition: Used , Turbo Type: None Mounted , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 12 Volt , Rated Power: 26 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 33 , Generator Hz: 50 , Generator Volts: 240 , Generator Amps: 277/480 , Generator Fases: 3 Fases , , https://www.hamofa.com/catalog/product/view/id/6970, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 1.200 kg, Type number: 30ROZJ GENERATOR 33KVA

; Gross weight [kg]: 1500; Engine: Kohler KDI2504TCRCAC-SV; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 250

CONTROLS   PLC SIEMENS S5 100 U DECOILER   sheet width max.: 120 mm LEVELLER UNIT   number of leveller rolls: 19 2 x machines

material width:400 mm coil weight:3,0 t material thickness:0,5 - 4,0 mm coil internal diameter:460 - 530 mm coil external diameter:1500 mm no. of straightening rolls:9 straightening roll diameter:50 mm no. of lower support rolls:12 no. of upper support rolls:10 diameter of support rolls:90 mm material cross-cut:1600 mm² speed of coil line:0 - 20 m/min power requirement:35,0 kW weight:10,5 t dimensions (WxDxH):10,0 x 2,5 x 2,9 m straightening machine:KRE 50.400/9 adjustment of straightening rolls :motoric insertion wedge:hydraulic adjustable decoiler:3000.1 snubber roll:hydraulic expansion:hydraulic sideway adjustment:motoric pivoting:manual roll feed:Servo; WVE 160/400 intermittant lifting:hydraulic

material width coil line:600 mm coil weight in kg:2 x 3000 kg coil internal diameter:460 - 630 mm coil external diameter:1500 mm material thickness coil line:0,5 - 3,0 mm Number of Straightening rolls:9 roll diameter:30 mm material cross-cut:1200 mm² weight:9,5 t Dimensions (WxDxH):4,3 x 2,6 x 2,6 m straightening machine:30.600/9 double decoiler:Kohler, 3000.2 ausiliary drive:hydraulic lag brake:pneumatic expansion:hydraulic snubber roll:hydraulic; motoric driven