used krauss maffei plastic injection machines

Krauss Maffei injection moulding machine Type: KM 650-3500 C2 control: MC 3F built: 1997 Clamping unit Clamping force t: 650 gap mm: 1150 Holm dimension mm: 1000 x 930 min/max height mm: 600 / 1750 Plate size: 1510 x 1370 injection unit Screw diameter mm: 90 injection weight gr: 2605 Injection volume cm 3: 1777 spray pressure bar: 1742 Dimensions and weights Dimensions Lxwxh m: 10 x 2.8 x 2.7 machine weight kg: 35,000 Miscellaneous Core pull 4 EUROMAP 12

Krauss Maffei injection moulding machine Type: KM 320-1400 C3 control: MC4 year: 2000 Clamping unit Clamping force t: 320 gap mm: 920 Holm dimension mm: 710 x 710 min/max height mm: 380 Plate size: 1060 x 1095 injection unit Screw diameter mm: 60 injection weight gr: 617 Injection volume cm 3: 678 spray pressure bar: 2007 Dimensions and weights Dimensions Lxwxh m: 6.8 x 2.2 x 2.4 machine weight kg: 16,300

Krauss Maffei injection moulding machine Type: KM 280-1400 C3 battery control: MC4 year: 2000 Clamping unit Clamping force t: 280 gap mm: 820 Holm dimension mm: 630 x 630 min/max height mm: 330 Plate size: 995 x 1050 injection unit Screw diameter mm: 60 injection weight gr: 617 Injection volume cm 3: 678 spray pressure bar: 2007 Dimensions and weights Dimensions Lxwxh m: 6.1 x 2.2 x 2.3 machine weight kg: 14,200 Miscellaneous 1 core pulling Euromap12, battery

Krauss Maffei injection moulding machine Type: KM 180-1000 C3, battery control: MC 4 year of construction: 1999 Clamping unit Clamping force t: 180 gap mm: 700 Holm dimension mm: 560 x 560 min/max height mm: 600 Plate size: 915 x 915 injection unit Screw diameter mm: 55 injection weight gr: 476 Injection volume cm 3: 523 spray pressure bar: 1904 Dimensions and weights Dimensions Lxwxh m: 5.6 x 1.9 x 2.2 machine weight kg: 9,700 Miscellaneous new pump 2013 Euromap12 battery

Krauss Maffei KM 50 / 160 C2 Operating hours approx. 47,500 Core train Operational data collection (function uncertain, was not used by us) Various power connections Screw diameter D=30mm Condition: good / Ready to use without funnel

KRAUSS MAFFEI KM 110-520 C1 warehouse no.: 503020 manufacturer: KRAUSS MAFFEI type: KM 110-520 C1 controller: MC4 year of construction: 2003 technical data clamping unit clamping force: 1100 kN distance between tie bars h:: 470 mm distance between tie bars v:: 470 mm size of mould plates h: 745 mm size of mould plates v: 770 mm min. mould height: 300 mm max. open daylight: 900 mm opening stroke: 600 mm ejector stroke: 150 mm ejector force: 22 kN centering diameter of moving platen: 125 mm centering diameter of fixed platen: 125 mm weight of mould: 1485 kg technical data injection unit screw diameter: 40 mm swept volume: 217 ccm injection pressure: 2377 bar screw length: 23 l/d screw speed: 307 min plasticising rate: 22 g/s PS injection rate into the open: 126 g/s PS number of heating zones: 5 measures & weight measures of machine lxbxh: 4.4m x 1.5 ...

Manufacturer: Krauss Maffei Type: KM 110 - 520 C2 Year of construction: 2003 Control: MC 4 Closing force: 1100 kN Closing type: Hydraulish Tie bar spacing: 470 mm x 470 mm Plate size: 745 mm x 770 mm Tool height: min 300 mm Opening distance: 600 mm Plate spacing max.: 900 mm Screw: 40 mm Lifting volume: 217 ccm Injection weight PS: 198 gram HP Injection pressure: 2377 bar general Engine: 18.5 kW Heating: 13 kW Dimensions: 4.5 m x 1.5 m x 2.2 m Weight: 6000 kg Screen text: German / English Additional equipment Robot interface Core train: x1 Accu

1,0 St. gebr. Injection molding machine with turntable, lateral unit from medical technology Manufacturer: KRAUSS MAFFEI Type: KM100/180CX Year of construction: 2007 Clamping force: 100 tons Tie bar spacing: 370 x 370 mm Screw DN 1: 25 mm Displacement: 59 cm³ Moulded part weight: 54 g/hp Screw DN 2: 15 mm Displacement: 14 cm³ Moulded part weight: 13 g/hp Control: MC5 Equipment of the machine: -Interface robot -Additional control pump -2.0 ST. Core pulls

Clamping unit Clamping force [kN] 1100 Dimensions of mounting plates (hxv) [mm] 745 x 770 Clearance between columns (hxv) [mm] 470 x 470 Min./ max. mould height [mm] min 300 Injection Unit Screw diameter [mm] 50 Injection volume [cm3]: 393 Injection weight [g] 358 Injection pressure [bar] 1892 Dimensions & Weight Net weight with control cabinet [t] 7,8 Dimensions (L x W x H) [m] 5.0 x 1.6 x 2.0

Dimensions & Weight Net weight with control cabinet [t] 7.69 Dimensions (LxWxH) [m] 4.48 x 1.5 x 2.2 Clamping unit Clamping force [kN] 1250 Dimensions of mounting plates (hxv) [mm] 805 x 770 Clearance between columns (hxv) [mm] 530 x 470 Min./ max. mould height [mm] min 300mm Injection Unit Screw diameter [mm] 45 Injection volume [cm3] 275 Injection weight [g] 250 Injection pressure [bar] 1878

Clamping unit Clamping force [kN] 1300 Dimensions of mounting plates (hxv) [mm] 745 x 770 Clearance between columns (hxv) [mm] 470 x 470 Min./ max. mould height [mm] min 300 Injection Unit Screw diameter [mm] 55 Injection volume [cm3] 475 Injection weight [g] 432 Injection pressure [bar] 1564 Dimensions & Weight Net weight with control cabinet [t] 7,8 Dimensions (L x W x H) [m] 5.0 x 1.6 x 2.0

Clamping unit Clamping force [kN] 4500 Dimensions of mounting plates (hxv) [mm] 1270 x 1200 Clearance between columns (hxv) [mm] 900 x 800 Min./ max. mould height [mm] min 480 Maximum opening width [mm] 1650 Injection Unit Screw diameter [mm] 90 Injection volume [cm3] 1953 Injection weight [g] 1777 Injection pressure [bar] 1742 Electrical-hydraulic equipment Pump motor rated power [kW] 90 Heater power [kW] 59 Dimensions & Weight Net weight with control cabinet [t] 26.3 Dimensions (L x W x H) [m] 7.98 x 2.35 x 2.51m

Cleaned, tested, repaired machine, ready for production. 50 tons clamping force, 320x320 column spacing. 18 screws, 25 cm3 injection volume. 1 core puller, 1 air circuit. The display language is German or English. The handbook is in German. The machine is in very good condition, it can be viewed during operation. A video of his operation was also made. Check out our other ads.

All maintenance has been done January 2021 380 Ton Screw diameter : 70 mm

Krauss Maffei injection moulding machine Type: KM 280-1400 C3 control: MC 4 year of construction: 2002 Clamping unit Clamping force t 280 gap mm: 820 Holm dimension mm: 630 x 630 min/max height mm: 330 Plate size: 995 x 1050 injection unit Screw diameter mm: Gr 60 injection weight: 617 Injection volume cm 3: 678 spray pressure bar: 2007 Dimensions and weights Dimensions Lxwxh m: 6.1 x 2.2 x 2.3 machine weight kg: 14,200 Miscellaneous 1 core pulling robot interface battery Highspeedmachine

Krauss Maffei bi-material KM1600/12000/8100 MX -Clamping force : 1300 ton -Manufactured year : 2007~2009 -Quantity : 12 units

Manufacture Krauss Maffei Type KM 350-1900C2 Year prod../ no. manufacture 2001/354332 Diameter of screw mm 60 Shot volume g 700 Presure bar 2420 Clamping force kN 3500 Mould fixing platen size mm 1060 x 1095 Distance between tie bars mm 710 x 710 Mould height - max. mm 380 Opening stroke mm 920 Max odległość pomiędzy płytami mm 1600 Control MC 4 Weight kg 16.000 Additional Hydraulics cores - 4 pcs. // Bottle with ntrogen

We can offer a Krauss Maffei injection moulding machine, manufactured in 2017, short time working, like new one, serious buyer cintact us.

This Krauss Maffei PX 121-540 injection moulding machine was made in the year 2017. It is equipped with a Krauss Maffei MC6 control unit. The machine has a clamping force of 1200 kN and screw diameter of 40 mm.

This Krauss Maffei KM 280-1400 C3 injection moulding machine was made in the year 2003 in Germany and has 60000 hours. The machine has a clamping fore of 2800 kN and an injection pressure of 2380 bar.

This KRAUSS MAFFEI 50-180CX Injection moulding machine was manufactured in the year 2013 in Germany. The machine has a clamping force of 500 kN.

This Krauss-Maffei 160-380 CX Injection moulding machine was manufactured in the year 2016 in Germany. It is equipped with a clamping force of 1600 kN, a SP 380 injection unit with a screw diameter of 35 mm. Shot weight for PS is at 140g.

This Krauss Maffei 300-1400 C1 was manufactured in 1998. A robust injection moulding machine, it features a clamping force of 3,000 kN and an MC 3 control unit. It has operated for approximately 18,176 hours. Extras include Ø60 mm and Ø70 mm barrels, and a PVC barrel with a Ø70 mm blower. A great opportunity to buy this Krauss Maffei 300-1400 C1 injection moulding machine. Contact us for further details.

This Krauss Maffei 850-12000 MX was manufactured in 2011. A robust hydraulic clamping unit and a standard screw with a diameter of 135 mm ensure efficient operation. It features a high injection pressure of 1389 bar and a maximum injection rate of 1415 cm³/s. The machine includes a KM LRX 500 handling robot, enhancing automation and productivity. Ideal for those needing a dependable injection moulding machine. Contact us for more information.

This Krauss Maffei 800-12000 MX was manufactured in 2007. It features a hydraulic clamping unit with a force of 8000 kN and a standard screw with a diameter of 135 mm. The machine offers a maximum injection pressure of 1389 bar and a shot weight in PS of 1600 g. It includes a handling robot, KM LRX 500, enhancing operational efficiency. For more information about this Injection moulding machine, please reach out to us.