Model
(Manufacturer: KRONES)
Used adhesive labelling machine from Krones A. G. Herman Kronseder type Contiroll 960-20. New 2003. Technical data: Capacity: 24000 but/h, Voltage: 230/400 V, Frequency: 50 Hz, Current type: 3~, Rated current: 45 A.
Used KRONES carbonated drink bottling line – capacity: approx. 7,000 bottles/h • Bottle formats: 330, 500, 700, 750, 900, 1000 ml • The line worked with cider, sparkling wine and champagne. • Possibility of pouring beer in a returnable/non-returnable bottle • Possibility to check and run the line before purchase. Available immediately. The line includes: 1. Bottle unloader for returnable bottles Kettner 1989 (Kontipack E) 2. Krones returnable bottle washer from 1988 Type 150/10-110 3. Krones VKV40/SV10/KK filler from 1988 - 40 fillers with ALCOA capping machine 4. Krones capping machine 5. Bottle capping machine ADELSKI PP2010, 2007 (Adelski) 6. Manual cork presser 7. Installation for Velcorin 8. Wire insertion machine (Nortan, Minerva 80-120, 1995) 9. Machine for applying gold (Nortan, Prisma 80:s, 1994) 10. Labeling machine + banderole (Krones Taxomatic, KES - ...
Used labelling machine by Krones A. G. Herman Kronseder type Universella 723-931, new 1993. Specification: - number of discs: 15, - number of pallets in the aggregate: 8, - number of grippers in the cylinder: 6, - bander: large and small, - capacity 18,000 bottles/h, - several bottle formats, - side positioning of bottles.
Labeling/banderole machine, New 1998. Machine has listed all the bearings, following a review. Very good condition. Yield approx. 20.000 pcs / h. Machine glueds: main label, counter label, little tie and a banderole. Manufacturer's documentation.
Filler Mfc.: Krones Type: Variojet Built: 2003 Overhualed by Krones in 2021 Speed up to 9000/h with saturated beer 4.5 Gr/L 3°C Rinser, filler, capper 26 mm and second capper head for screw caps (wine or liquor)
capacity: approx 3.000 crates / h - incl. platform - incl. two crate turners Presently equipped for crates running long side leading. Maximum crate width: 410 mm Conversion to crates running short side leading possible.
180° curved conveyor Krones Multico S and 90° curved conveyor Krones Machine 180° and 90° curve conveyors suitable for different tray/container formats. 180° modular belt 525 mm, distance between input/output 1700 mm 90° modular belt 525 mm, R1000.
Labeling machines fully automatic Krones Etima Solomatic Machine Krones Labeliernaschine Solomatic Chest torso back 3- leimagregate 3- cold glue pump Power 28,000 FL/h Control Siemens S7
Krones EBI empty bottle Inspector along with contour detection module and ejector tables Krones bottle inspector along with contour detection module: • Type: Krones Linatronic • Production year: 2012 • Capacity: 60 000 bottle/hours • Work direction: form left to right Possible detections: • Rest of the liquid (infrared) • Double control of residual soda (high frequency) • Neck damage control • Sidewall control modules • Damaged bottles discard • Separate rejection of dirty bottles • Detection of the contour of the bottle • Detection of the color of bottle • Separate rejection of a bottle with wrong contour or color The system includes: • KRONES Linatronic Inspector • Contour detection module • Ejection table behind the Inspctor • Ejection table behind the contour detection module
KRONES filler Year of construction: 1986 overhaul: 2012 Capacity: 24,000 fl/St vacum pump doble pre evacuation
For sale: electrical cabinet producer Krones 400 V 50 Hz 103A ICW/ ICU : - / 35k A
Ultra Clean Filling Line Krones 22000 bph for CSD in PET bottles - 2010 Complete ultra clean filling line for carbonated soft drinks, cider, water made by Krones and GEA in 2010. The line has been always serviced by Krones service and thus in excellent condition. Blow moulding, rinssing, filling and capping compartment of the line is ultra clean. All these machines are connected to each other’s and they are forming a closed ultra clean compartment where bottles are transferred without conveyors from machine to machine. Filling valves are sterilized with steam and the rest with Preracetic Acid C2H4O3 solution. Process department is made by GEA and it can produce various aseptic products and other beverages. Packing department has very versatile Krones Variopac Pro for shrink, shrink tray and carton boxing and a new in year 2015 Krones Robopox palletizer. Main Characteristics M ...
TECHNICAL DATA Power Kw 5,7 Min diam. inside reel mm 40 Max diam. outside reel mm 390 Bottle rack disks: 8 Production capacity: 7200 BPH Range diam. bottles: 50-125 mm Range altezza bottles: 150-350 mm Formats currently installed: Bottle 0.24 lt (round): Diam. 55 mm, Alt. 160 mm wrap label 158 x 102 mm Bottle 0.24 lt (oval): Dimensions 71 x 28 mm alt. 203 mm Body label 49 x 136 mm, back label 49 x 136 mm Bottle 0,355 lt (round): Diam. 63 mm, Alt. 180 mm wrap label 185 x 110 mm + 140 x 110 mm DESCRIPTION: Automatic rotary labelling unit equipped with one of the most versatile and flexible self-adhesive labelling heads. Parts of the machine: labeling carousel, bottle rack table, friction screw, central command of the conveyor. Supplied with the necessary security devices. Based on practical adjustable feet. Electric display for programming of labeling ...
-Manufacturer: KRONES -Type: Belt Conveyor Unit 180° -Year of manufacture: 2015 -Outside length: ~5000 mm -Width (ø): ~3000 mm -Belt width: 860 mm -Condition: Excellent
Manufacturer: KRONES Type: Belt Conveyor Unit 180° Year of manufacture: 2015 Outside length: ~5000 mm Width (ø): ~3000 mm Belt width: 860 mm Condition: Excellent
Labeling machine, Fabr. Krones, type: Universella 600-15, with 2 units for torso, chest and back label, for cold glue labelling, built in 2016, has already been removed and stored.
Bottle washer, Fabr. Krones, type: Lavatec KESK-212/22-80, 22 bottles/row, with 80mm Cell division, plastic cells, with attached control cabinet in stainless steel, built in 1999, L: 7,955 mm, W: 4,216 mm, H: 3,270 mm, already dismantled and stored
Labeller, make Krones, type: Universella 600-15-8-6-130, 2 aggregates for cold glue label at body, shoulder, back; Videojet dating built 1995
Labeler, make Krones, type: Variomatic, for 12.000 bph, adjust to 0,5 lt. and 0,75 lt. bottles, with 3 aggregates, for Body- shoulder and back label, as too with additional label dispenser for self-adhesive labels, with around safety casing, built-on control cabinet, year of origin: 1998
Labeler, make Krones, type: Prontomatic 720-21-8-8-110 RM, for 0,7 lt GdB bottle, for 24.000 bph, for body-, shoulder- and back label, right -> left counter clockwise, with 2 heated glue pumps, built 1997
Labeler, make Krones, type: Prontomatic 18-8-6, with heated glue pumps, for 3 labels, built 1987
Labeler, make Krones, type: Universella 18-8-6. with 2 glue pumps, conveyors, sets for 0,25 lt + 0,33 lt Gastro crown cap, 0,33 lt Longneck screw cap, 0,5 lt NRW brown crown cap, 0,5 lt NRW white screw cap, 0,7 lt GDB screw cap, 0,75 lt Gastro screw cap, built 1998.
Labeler, make Krones, type: Bonamatic 1.240-20-4-4, with 20 bottle dishes, 4 grippers and 4 glue pallets, adjust to 0,7 lt. bottles, with 3 aggregates, for body, shoulder and back label, as too for neck ring and foot label, with cam-bottom adjustment, with around safety casing, with Siemens S5 control, built 1990
Labeler, make Krones, type: Robusta 10-4-4, for ~20.000 bph, with 10 bottle dishes, 4 grippers and 4 glue pallets, adjust to 0,2 lt, 0,33 lt., 0,5 lt. and 0,7 lt. bottles, for body, shoulder and back label, with around safety casing, with Siemens S5 control, built 1997
Labeler, make Krones, type: Vinetta 6-3-3/180, control range: 1.700 - 4.800 bph, for 0,7/0,75 lt and 1,0 lt bottles, with 2 stations for body-, shoulder- and back label, direction: right->left, built 1985
Bottle filler, make Krones, type: VKS 84 / SV 12-094 RM, for lemonade and mineral water 24.000 bph, with 84 filling valves (mechanical with float control), with 12-head screw capper make Zalkin, for MCA 28 aluminum caps, right machine, built 1992
Bottle Filler and crown capper, make Krones, type: Mecafill VK2V 024-188/KK, 24 filling valves, Vacuum pump, Hot water injection before closing, 6 head bottle cap closing, Crown Cork feeder, electr. height adjustment, direction: counter clockwise / right to left, with Siemens S7 Simatic ET200M, built 1998
Bottle washer, make Krones, type: Lavatec KES 245-26-080, for 39.000 bph, control range 15.000-46.000 bph, 26 bottles/row, with 80mm cell pitch, 110mm chain pitch, with SPS Siemens S7 control, width: 4.745 mm, length: 11.283 mm.
Bottle washing machine, Fabr. Krones, type: Lavatec KESK 245/17-120, control range 4,000 - 11,000 fl/h, for bottles with max Ø 105mm, built in 2002, Eind machine, with 180 rows of 17 bottles/row each, with pre-soft water and lye, main liquor with immersion switch and after-liquor spraying, 3 water sprays hot, cold and fresh water in stock from May!
fully automatic Wasserentgaser, CIP capable, autom. Valves, Hilge pump, Sihi vacuum degassing, 40,000 litres / h
Krones Autocol Type 747 Please note the operating hours. Specifications: • Voltage: 230/400 V, Current type: 3/N/PE • Frequency: 50 Hz • Nominal current: 10 A • Operating hours: approx. 3000 • Equipment: 01.01 0.800 L ketchup bottle PE fuselage/back 0.500 l Working air: min.: 5 bar max.: 10 bar Vacuum pump for automatic roll bonding: Min.: 4 bar max.: 7 bar Permissible operating pressures Clamping Machine Shell: min.: 5 bar max.: 7 bar Permissible operating temperatures in C° min.: +5 C° max.: + 50 C° Permissible height tolerance of containers (mm) Glass container: +/- 2.5 Pet container + 2.5/- 6 Drive motor: 11.0 kW frequency-controlled Connected load: 26.7 kVA
Condition: well-kept/ in operation Availability: as of 31.08.2023 Nominal capacity: 13,000 containers/h Dismantling: by the buyer or for an expense allowance
Technological data: Capacity: • 0.15l, 0.25l 65,000 cans/hour • 0.33l 50,000 cans/hour • 0.5l 37,000 cans/hour Year of construction 2014 Filling and packaging technology 1. Container pusher PRESSANT UNIVERSAL 1A 2. Empty can inspector CANTRONIC 709 D 3. Can filling machine VOLUMETIC VODM-C2.160-72-94 4. Control equipment CHECKMAT731 FM 5. Foam cleaning 6. Disposable packaging machine VARIOPAC PRO TFS-9 7. Pallet loader MODULPAL 1ADR 8. Pasteurizer LINAFLEX LC23.6-523-31 9. Container transport SYNCO S 10. Control equipment CHECKMAT 731 FM-X 11. Container transport MULTICO S 12. Pallet transport PALCO S – Loader division 13. Pallet transport PALCO S – area pusher Technology 14. Beverage processing technology CONTIFLOW 30 / 6. 15. CIP system VARIOCLEAN AUT-5,000L, 30 m3/hour Information technology and communication technology 16. Network/Hardware Technology 17. LDS (product ...
Wet Glue Labeling Machine Krones / Germany Type Universala H Rotary Machines Running Direction: Left-Right Bottles 0.375 + 0.75 sparkling wine + 0.75 + 1.00 wine glass bottles Chest, back, neck label + champagne bow Bottle Alignment Capacity 4,000 bph Built in 1991 Spare parts and trimmings worth €50,000 FILM AVAILABLE - PLEASE REQUEST Further documents and price on request
PET Bottle Blowing Machine Not complicated, damaged, in part. The machine has no electrical installation and many elements are missing. All elements entering the rock of the machine are visible in the pictures. The machine has 10 molds for PET bottles with a capacity of 500 ml with jaws. Ability to get more photos.
Used filling line for EW-PET Output: 24,000 bottles/h at 0.5l PET Product: Soft drinks
Used filling line for EW-PET Capacity: 12,000 bottles/h at 0.5l PET Product: Soft drinks
Used filling line for EW-PET Capacity: 12,000 bottles/h at 1.5l PET Product: Soft drinks
Capacity: 5.0 - 15.0 l/h Equipment: Flavour doser for water-soluble flavours
Capacity: 7,200 bottles/h Features: 0.5l, 1.0l, 1.5l, 2.0l PET bottle
Capacity: 10,000 bottles/h Equipment: 4 units for self-adhesive labels from the roll (torso, chest, back, closure)
Capacity: 30,000 bottles/h Equipment: Wrap-around label from the roll + self-adhesive label from the roll
Model Rinser: Variojet 2.520-070-113 Model filler: Sensometic VP-G 050-113/SV 10/SOV 10-S Model Etima: Prontomatic 720-12-6-4-180 Capacity: 12,000 bottles/h with 0.7l glass bottle Product: non-carbonated beverages
with 130 filling valves and 26head crown corker Year of manufacturing: 1994 capacity: approx. 50.000 bph Control system to Siemens S7 - 02/2011 Reconstruction capper to crown cork and Twist off, both is possible without conversion of the capping elements
Kiomplette filling line for soft drinks in glass bottle Output: 20,000 bph at 0.5 litre bottle Year of construction. 1996 Equipped for 300 ml / 500 ml / 1.0 L
Labelling Machine for glass bottles Krones Robusta 10000 bph Good condition, mechanical labelling machine for pre-cut paper labels with cold clue. It has two label stations, one with two label feeding trays and another with one feeding tray for front, back and neck labels. The carousel is rotated with variator driven electric motor and bottle tables have a belt drive. The labeller was built in year 1995, profoundly overhauled in 2016 and operated since overhaul only approx. 100 hours and thus in very good condition. Delivery includes labeller and approx. 1.5 meter in feeding and out feeding belt conveyors Technical characteristics Manufacturer: Krones AG Machine type: Robusta 600-10-4-4-180 Capacity: 10’000 bph Label type: Pre-cut paper with cold glue Number of bottle tables: 10 Number of labelling stations: 2 Labels on glass bottles: front, back and neck Manufac ...