used kunzmann universal milling machines

Table length: 650 mm Table width: 350 mm Longitudinal X: 400 mm Cross Y: 350 mm Vertical Z: 400 mm CNC Brand: _Unknown / Other MACH-id       6029 MAKE            Kunzmann Germany TYPE              WF 4/3 YOP               2007 SPECIFICATIONS X-Axis         400 mm Y-Axis          350 mm Z-Axis          400 mm Table Length        650 mm Table Width         350 mm Table load            250 Kg Spindle speeds        4000 Rpm Feed rate X-Axis        5000 mm/min. Feed rate Y-Axis        5000 mm/min. Feed rate Z-Axis       ...

Table length: 650 mm Table width: 350 mm Longitudinal X: 400 mm Cross Y: 320 mm Vertical Z: 400 mm MACH-id    5479 MAKE         Kunzmann TYPE           WF 4/3 YOP            2010 SPECIFICATIONS X-Axis       400 mm Y-Axis        320 mm Z-Axis         400 mm Table Length       650 mm Table Width        350 mm Table load         250 Kg Spindle speeds        4000 Rpm Feed rate X-Axis      10.000 mm/min. Feed rate Y-Axis         10.000 mm/min. Feed rate Z-Axis           10.000 mm/min. DIMENSIONS Length          3000 mm Widt ...

Universal tool milling machine KUNZMANN WF 4/3 With 3 axes Heidenhain digital display Year of construction: 1996 Travels: X 400 Y 320 Z 400 Speed range: 40 – 2550 rpm With the following accessories: Rigid angle table 800 mm x 360 mm clamping surface Mechanical handwheels for X, Y, Z axle Hydraulic tool clamping Automatic central lubrication pump for X, Y, Z axis Machine light 4-Piece Machine Shoes Coolant system Operating instructions THE MACHINE WAS ONLY USED FOR APPRENTICESHIP TRAINING !! THE MACHINE IS IN GOOD CONDITION !!

Universal milling and drilling machine KUNZMANN WUF5/3 with Heidenhain ND 780 Built in 1989 in good condition. Technical data WUF5/3: Position indicator Heidenhain ND 780 The ND 780 position indicator is particularly suitable for use on milling, drilling and turning machines with up to three axes. Router table: Clamping surface 850x350 mm Clamping grooves 5 Groove width 14H7 mm Groove spacing 63 mm Workspace: Longitudinal (X-axis) 490 mm Transverse (Y-axis) 310 mm Vertical (Z-axis) 400 mm Max. distances: Top of the table up to Horizontal spindle centre 40 – 420 mm Top of the table up to Vertical head lower edge 350 mm Milling spindle: Tool holder SK40 Horizontal speeds 40 – 2500 min-1 Vertical speeds 40 – 2500 min-1 Quill stroke 60 mm Vertical head can be swivelled on both sides + - 90° Feed rate 1000 mm/min Rapid traverse 4000 mm/m ...

Kunzmann Universal Milling and Drilling Machine WUF5/3 with Heidenhain ND 780 Built in 1989 in good condition. Technical data WUF5/3: Position indicator Heidenhain ND 780 The ND 780 position indicator is particularly suitable for use on milling, drilling and turning machines with up to three axes. Router table: Clamping surface 850x350 mm Clamping grooves 5 Groove width 14H7 mm Groove spacing 63 mm Workspace: Longitudinal (X-axis) 490 mm Transverse (Y-axis) 310 mm Vertical (Z-axis) 400 mm Max. distances: Top of the table up to Horizontal spindle centre 40 – 420 mm Top of the table up to Vertical head lower edge 350 mm Milling spindle: Tool holder SK40 Horizontal speeds 40 – 2500 min-1 Vertical speeds 40 – 2500 min-1 Quill stroke 60 mm Vertical head can be swivelled on both sides + - 90° Feed rate 1000 mm/min Rapid traverse 4000 mm/m ...

Description CNC tool milling machine from Kunzmann suitable for tooling, fixture construction, training as well as mold making Travel: 600x400x400mm Speed: 50-4000 rpm Technical data Control CNC Heidenhain 310 Table 800 x 425 mm Longitudinal path (X,Y,Z axis) 600x400x400mm Tool changer no Tool holder: SK 40 Vertical spindle speeds: 50-4000rpm Feeds 2-5000mm/min Connection 50 Hz 3x 380V Spindle motor 5.5KW Machine weight approx. 1800kg Dimensions 2000x1700x3000mm

Description Universal tool milling machine of the Kunzmann brand suitable for tooling, fixture construction, training as well as mold making Control NC Heidenhain TNC 124 Table 650 x 350mm Technical data Control NC Heidenhain TNC 124 Table 650 x 350mm Longitudinal path (X,Y,Z axis) 400x350x400mm Tool holder: ISO 40 Vertical spindle speeds: 40-4000rpm Feeds 2-4000mm/min Connection 50 Hz 3x 380V Spindle motor 4KW

Table clamping area: 350 x 700 mm x-path: 500 mm y-way: 320 mm z-way: 400 mm Spindle holder: SK 40 Spindle speeds: 30 - 2500 rpm Operating voltage: 380 V Total power requirement: 2.2 kW Space requirement: 1500 x 1500 x 1800 mm Weight: approx. 1700 kg

Kunzmann WF 7 CNC Heidenhain TNC 355 Machine no. 370006 Working range X/Y/Z 600/400/400mm Drive power 6,5kW Hydraulic tool clamping , Tool holder SK40 Speeds 1-4000 rpm infinitely variable Feed speed 0-2000 mm/min Rapid velocity 4000 mm/min Pinole extendable 60mm with electronic handwheel Automatic tool changer 8-fold Coolant device freestanding Automatic central lubrication Weight 2000kg Tool changer must be adjusted, transfer to pinole hooked incl. complete documentation

- X: 650 mm - Y: 500 mm - Z: 450 mm - Table size: 1,100 x 600 mm - Table load: 450 kg - Speed range: 6,500 rpm - Spindle mount: SK 40 - Internal coolant supply: no - WZ changer: 38-speed - Controls: Heidenhain 430 - Spindle On: 6566 h - Program run: 6051 h - Machine ON: 31121 h - Total power: 20 kW - Machine weight: 5500 kg - Space requirements (W x D x H): 2.3 x 3.1 x 2.3 m - Condition: very good Details nice well-kept machine, ready for immediate use, the machine does not have a tool changer Accessories no other accessories, documentation

X-axis: 500 mm Y-axis: 400 mm Z-axis: 400 mm Table dimensions: 700 x 425 mm Spindle Exception: SK 40 Spindle speeds: 1 - 4000 rpm. Spindle stroke: 60 mm Equipped with: - ISO tool holders - Coolant system -Operating instructions Country of origin: Germany Motor power: 5 kW Machine LxWxH: 200 x 200 x 200 cm Machine weight: 2000 kg

Univ. NC tool milling machine KUNZMANN type WF 3/4 machine no. 341020 Year of construction 1998 Travel X: 400 mm Y: 320 mm Z: 400 mm Table size 650 x 350 mm Spindle mount SK 40 Spindle speed 40 - 2500 rpm. Feeds X, Y and Z- axis 0 - 1000 mm/min. infinitely variable rapid traverse X, Y- axis 4000 mm/min. Rapid traverse Z-axis 3000 mm/min. Vertical quill adjustment 60 mm Drive power spindle motor 3 KW Mains connection 400 volts, 50 Hz - CNC line control Heidenhain TNC 124 - Spindle speed over 2 gear stages and infinitely variable via frequency converter - Vertical milling head +/- 90 swivelling - hydr. Tool clamping - fixed angle table - control cabinet fixed to the machine - coolant tank with pump opposite - central lubrication - lighting space requirement L x W x H 1800 x 1800 x 1900 mm weight 1300 kg good condition; used

Universal milling head, milling adapter, milling extension, angled milling head, universal milling angled head, milling angled head, milling head, top head -Manufacturer: Kunzmann, top head from milling machine type UFV 600 -Gear: 31 teeth -Dimensions: 505/180 / H195 mm -Weight: 30 kg

Counter bearing, bearing block, pillow block, bearing for milling machine, upper support -Dovetail: 11 by 94 mm 16 mm high -Drawing: in the photos -Dimensions: 730/160/H110 mm -Weight: 28 kg

Description: Traverse paths X 400 mm, Y 350 mm, Z 400 mm, hydraulic tool clamping, cone SK 40, speed range 1 to 4500 rpm, table support 650 x 350 mm, control HEIDENHAIN TNC 128, read machine hours 8027, programme hours 1063, attention: without vice weight approx.: 2,000 kg, Approx. Onsite Dimension. (l x w x h): 2,000 x 1,800 x 2,000 mm

Description: Universal tool milling machine - Digital display - horizontally milling device - Coolant system - Vise - Operation manual x-travel 600 mm y-travel 410 mm z-travel 200 mm Speed range - horizontal 30 - 1280 rpm Speed range - vertical 50 - 2150 rpm Head swivels +/- 90° Spindle holder ISO SK40 Table surface 1000 x 315 mm Total power requirement 3.2 kW Machine weight approx. 1.44 t Space requirement approx. 1.6 x 1.7 x 2.1 m weight approx.: 1,450 kg, Approx. Onsite Dimension. (l x w x h): 1,600 x 1,700 x 2,100 mm

Description: Universal tool milling machine - Digital display - horizontally milling device - Coolant system - Vise - Operation manual x-travel 600 mm y-travel 410 mm z-travel 200 mm Speed range - horizontal 30 - 1280 rpm Speed range - vertical 50 - 2150 rpm Head swivels +/- 90° Spindle holder ISO SK40 Table surface 1000 x 315 mm Total power requirement 3.2 kW Machine weight approx. 1.44 t Space requirement approx. 1.6 x 1.7 x 2.1 m weight approx.: 1,450 kg, Approx. Onsite Dimension. (l x w x h): 1,600 x 1,700 x 2,100 mm

Description: Universal tool milling machine - Digital display - horizontally milling device - Coolant system - Vise - Operation manual x-travel 600 mm y-travel 410 mm z-travel 200 mm Speed range - horizontal 30 - 1280 rpm Speed range - vertical 50 - 2150 rpm Head swivels +/- 90° Spindle holder ISO SK40 Table surface 1000 x 315 mm Total power requirement 3.2 kW Machine weight approx. 1.44 t Space requirement approx. 1.6 x 1.7 x 2.1 m weight approx.: 1,450 kg, Approx. Onsite Dimension. (l x w x h): 1,600 x 1,700 x 2,100 mm

Description: Universal tool milling machine - Digital display - horizontally milling device - Coolant system - Vise - Operation manual x-travel 600 mm y-travel 410 mm z-travel 200 mm Speed range - horizontal 30 - 1280 rpm Speed range - vertical 50 - 2150 rpm Head swivels +/- 90° Spindle holder ISO SK40 Table surface 1000 x 315 mm Total power requirement 3.2 kW Machine weight approx. 1.44 t Space requirement approx. 1.6 x 1.7 x 2.1 m weight approx.: 1,450 kg, Approx. Onsite Dimension. (l x w x h): 1,600 x 1,700 x 2,100 mm

Description: Universal tool milling machine - Digital display - horizontally milling device - Coolant system - Vise - Operation manual x-travel 600 mm y-travel 410 mm z-travel 200 mm Speed range - horizontal 30 - 1280 rpm Speed range - vertical 50 - 2150 rpm Head swivels +/- 90° Spindle holder ISO SK40 Table surface 1000 x 315 mm Total power requirement 3.2 kW Machine weight approx. 1.44 t Space requirement approx. 1.6 x 1.7 x 2.1 m weight approx.: 1,450 kg, Approx. Onsite Dimension. (l x w x h): 1,600 x 1,700 x 2,100 mm

Description: Universal tool milling machine - Digital display - horizontally milling device - Coolant system - Vise - Operation manual x-travel 600 mm y-travel 410 mm z-travel 200 mm Speed range - horizontal 30 - 1280 rpm Speed range - vertical 50 - 2150 rpm Head swivels +/- 90° Spindle holder ISO SK40 Table surface 1000 x 315 mm Total power requirement 3.2 kW Machine weight approx. 1.44 t Space requirement approx. 1.6 x 1.7 x 2.1 m weight approx.: 1,450 kg, Approx. Onsite Dimension. (l x w x h): 1,600 x 1,700 x 2,100 mm

Description: Universal tool milling machine - Digital display - horizontally milling device - Coolant system - Vise - Operation manual x-travel 600 mm y-travel 410 mm z-travel 200 mm Speed range - horizontal 30 - 1280 rpm Speed range - vertical 50 - 2150 rpm Head swivels +/- 90° Spindle holder ISO SK40 Table surface 1000 x 315 mm Total power requirement 3.2 kW Machine weight approx. 1.44 t Space requirement approx. 1.6 x 1.7 x 2.1 m weight approx.: 1,450 kg, Approx. Onsite Dimension. (l x w x h): 1,600 x 1,700 x 2,100 mm

Description: Universal tool milling machine - Digital display - horizontally milling device - Coolant system - Vise - Operation manual x-travel 600 mm y-travel 410 mm z-travel 200 mm Speed range - horizontal 30 - 1280 rpm Speed range - vertical 50 - 2150 rpm Head swivels +/- 90° Spindle holder ISO SK40 Table surface 1000 x 315 mm Total power requirement 3.2 kW Machine weight approx. 1.44 t Space requirement approx. 1.6 x 1.7 x 2.1 m weight approx.: 1,450 kg, Approx. Onsite Dimension. (l x w x h): 1,600 x 1,700 x 2,100 mm

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Number of pallets: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN TNC 124 Technical data Number of axis total: 3 Table length: 800 mm Table width: 425 mm Longitudinal travel (X-axis): 600 mm Transversal travel (y axis): 400 mm Vertical travel (z axis): 400 mm Table load max.: 250 kg Distance from vertical spindle to table: 560 mm Taper in spindle:: 40 SK Spindle speeds: stepless horizontal from: 5 rpm up to: 5000 rpm vertical from from: 5 rpm up to: 5000 rpm Swivel range Vertical milling head: +/- 90 ° Feeds: stepless longitudinal from: 0 mm/min up to: 2000 mm/min transversal from: 0 mm/min up to: 2000 mm/min vertical from: 0 mm/min up to: 2000 mm/min Rapid traverse: long.: 10 m/min Rapid traverse: transversal: 10 m/min Rapid traverse: vertical: 7.5 m/min Vertical quill ...

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Number of pallets: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN TNC 124 Technical data Number of axis total: 3 Table length: 800 mm Table width: 425 mm Longitudinal travel (X-axis): 600 mm Transversal travel (y axis): 400 mm Vertical travel (z axis): 400 mm Table load max.: 250 kg Distance from vertical spindle to table: 560 mm Taper in spindle:: 40 SK Spindle speeds: stepless horizontal from: 5 rpm up to: 5000 rpm vertical from from: 5 rpm up to: 5000 rpm Swivel range Vertical milling head: +/- 90 ° Feeds: stepless longitudinal from: 0 mm/min up to: 2000 mm/min transversal from: 0 mm/min up to: 2000 mm/min vertical from: 0 mm/min up to: 2000 mm/min Rapid traverse: long.: 10 m/min Rapid traverse: transversal: 10 m/min Rapid traverse: vertical: 7.5 m/min Vertical quill ...