Safety valve, angle safety valves, pressure relief valve KAESER, KUNKLE VALVE Type 337 - H P: 970 mbar Connections: 2 New ! Dimensions: 185 x 117 x 132 mm
Safety valve, angle safety valves, pressure relief valve KAESER, KUNKLE VALVE Type 337 - H P: 1000 mbar Connections: 2 New ! Dimensions: 185 x 117 x 132 mm
Safety valve, angle safety valves, pressure relief valve KAESER, KUNKLE VALVE Type 337 - J P: 520 mbar Connections: 2 1/2 New ! Dimensions: 210 x 151 x 164 mm
Safety valve, angle safety valves, pressure relief valve KAESER, KUNKLE VALVE Typ 337 - J P: 610 mbar Connections: 2 1/2 New ! Dimensions: 210 x 151 x 164 mm
Safety valve, angle safety valves, pressure relief valve KAESER, KUNKLE VALVE Type 337 - J P: 650 mbar Connections: 2 1/2 New ! Dimensions: 210 x 151 x 164 mm
Safety valve, angle safety valves, pressure relief valve KUNKLE VALVE, KAESER Type 337 - J01ANE P: 920 mbar Connections: 2 1/2 New ! Dimensions: 210 x 151 x 164 mm
Safety valve, angle safety valves, pressure relief valve KUNKLE VALVE, KAESER Type 337 - J01ANE P: 1020 mbar Connections: 2 1/2 New ! Dimensions: 210 x 151 x 164 mm
Compressor control, control KAESER KOMPRESSOREN ESA 300 2x Time relay: SCHARCO ELEKTRONIK Type: UIPE 1x Circuit breaker: SQUARE D Type: TD0,54 1x contactor: SQUARE D Type: PR1.11E 1x contactor: SQUARE D Type: PR1.20E 1x contactor: SQUARE D Type: PC3.10E with auxiliary switch Type: PW22 in control box: 355 x 255 x160 mm without key ! used, tested ! Dimensions: 375 x 255 x 190 mm
Compressor spare parts KAESER AFVM 18 ( AFVM18 ) 893358.00010 450 bar Dimensions: 200 x 250 x 170 mm
Refrigeration dryer, compressed air dryer with oil-water separator KAESER TB 19 ( TB19 ) Operating pressure: max 15 bar Operating pressure HD: max 25 bar Nominal voltage: 230 V 1AC 50 Hz Nominal current: 3,,65 A Ambient temperature: 5 - 43 °C - Water separator: AQUAMAT 1 Mat.Nr.: 5.2648.00010 without refrigerant ! used, tested ! Dimensions ( refrigerant dryer ): 620 x 540 x 1340 mm Dimensions ( oil water separator ): 360 x 230 x 530 mm
Compressor Kaeser DS 200 ( DS200 ) Volumetric flow: 16,75 m3/min Discharge pressure: 10 bar Operating hours: 110372 Load hours: 7436 Drive power: 110 kW Weight: 2.3 t Year of construction: 1993 used, tested ! Dimensions: 2400 x 1630 x1820 mm
Manufacturer: Kaeser, Type: AS 35, Year: 1993, Schraubenkompressor: yes, Operating hours: 44000, Volume flow m³/min: ca.3,0, Antriebsleistung kW 1: 22, Volume flow rate m³/h: 3,3, Year :1993
Manufacturer: Kaeser Vakuumstation, Type: BSV 100, Year: 2006, Saugvermögen m³/h: 1,0 bar, revolutions rpm: 3000, Operating hours: 76281, Revolutions of main rotor U/min: 3000, Year :2006
Description: Kaeser AIRBOX CENTRE 550 with integrated air dryer and air receiver rated power: 3 kW air flow: 255 l/m working hours: 2811,2533 under load max.working pressure : 10 bars piston pump replace with brand new one in 2021! Kaeser C-Service on 06.10.2022. regulary maintained service manual: unavailable The innovative AIRBOX and AIRBOX CENTER The AIRBOX and all-in-one AIRBOX CENTER – which features an integrated compressed air receiver, refrigera tion dryer and optional filter equipment – are delivered with a control cabinet and ready for immediate operation. The use of energy-saving IE3 motors makes compressed air generation particularly efficient Oil-free compressed air This results in the following advantages for special ap plications: the compressed air quality corresponds to the quality of the intake air. No contamination is caused by the compression process. This ena ...
Description: rated power: 5,5 kW air flow: 800 l/min. working hours: 19742 in total working hours under load: 17808 max.working pressure : 11 bars time left to regular maintenance : 3000 Hours Kaeser equipment RFID card  , please also have a look at the video of ,this compressor Please note: compressors are delivered free of liquids, media, oils and fluids inside! flow rate: 800 l/min., operating pressure: 11 bar, modelname / number: SX 8, year of manufacture: 2,018, Approx. Onsite Dimension. (l x w x h): 590 x 632 x 970 mm, weight approx.: 155 kg
Description: serial number: 2250 rated power: 15 kW air flow: 2260 l/min. working hours: approx. 18029 hrs. in total working hours under load: approx. 13975 hrs. max. working pressure: 11 bar regulary maintained time left to regular maintenance: 2500 hrs. operating manual ,not available  , please also have a look at the video of this machine Please note: compressors are delivered free of liquids, media, oils and fluids inside!  , flow rate: 2260 l/min., suction capacity: 15 kW, operating pressure: 11 bar, modelname / number: SK 26, year of manufacture: 2,004, Approx. Onsite Dimension. (l x w x h): 850 x 1,150 x 950 mm, weight approx.: 300 kg
Description: serial number: 1020 rated power: 5.5 kW air flow: 800 l/m working hours: approx. 4700 hrs. max. working pressure: 15 bar time left to regular maintenance: 2400 hrs. integrated air receiver: 215 l integrated air dryer regulary maintained  , please also have a look at the video of this machine Please note: compressors are delived free of liquids, media, oils and fluids inside! flow rate: 800 l/min., suction capacity: 5.5 kW, operating pressure: 15 bar, modelname / number: SXC 8, year of manufacture: 2,015, Approx. Onsite Dimension. (l x w x h): 620 x 980 x 1,480 mm, weight approx.: 200 kg
Description: KAESER SK 25 T with integrated air dryer ABT 25 working pressure: 8 bar air flow: 2100 l/min rated power: 15 kW working hours: approx. 20300 h  , SK – Long-Term Savings discerning compressed air users expect maximum availability and efficiency, even from smaller compressors it will come as no surprise therefore that Kaeser’s SK series rotary screw compressors go far beyond meeting these key expectations not only do they deliver more compressed air for less power consumption, but they also combine ease of use and maintenance with exceptional versatility and environmentally responsible design the SIGMA CONTROL 2 ensures efficient control and system monitoring. The large display and RFID reader provide effective communication and maximum security multiple interfaces offer exceptional  , flexibility, whilst the SD card slot makes updates quick and ...
Description: rated power: 11 kW air flow: 2100 l/min. working hours: approx. 35000 h max. working pressure: 10 bars time left to regular maintenance: 666 Hours regulary maintained  , SK – series: Energy-efficiency: the essential requirement initial investment and servicing costs account for only a small part of a compressor’s total life-cycle costs. It is energy that accounts for the lion’s share of those costs. For more than 40 years, KAESER has been committed to minimising your energy costs for compressed air production. We also have the bigger picture in clear focus when it comes to servicing and maintenance costs, as well as maximum compressed air availability quiet and powerful, durable and secure!  , please also have a look at the video of ,this machine Please note: compressors are delivered free of liquids, media, oils and fluids inside!  , fl ...
Description: rated power: 30 kW air flow: 5700 l/m working hours: approx. 15917 hrs. working hours under load: approx. 13771 hrs. max.working pressure : 8 bars time left to regular maintenance : 3000 hours regulary maintained service manual: not available Please note: compressors are delivered free of liquids, media, oils and fluids inside! flow rate: 5700 l/m, suction capacity: 30 kW, operating pressure: 8 bars, modelname / number: ASD 57 T, year of manufacture: 2,005, Approx. Onsite Dimension. (l x w x h): 1,850 x 921 x 1,505 mm, weight approx.: 745 kg
Description: serial number: 1.9970.10020 pressure: 7 bar Approx. Onsite Dimension. (l x w x h): 2,500 x 1,500 x 1,600 mm, weight approx.: 700 kg
Description: serial number: 4987 max.working pressure: 8 bars rated power: 3 kW air flow: 400 l/m working hours: approx. 2952 hrs. in total working hours under load: approx. 2143 hrs. time left to regular maintenance: approx. 3000 hrs. Kaeser Equipment RFID card  , please also have a look at the video of this compressor Energy-saving performance The efficiency of a machine depends on the total costs incurred throughout the equipment’s entire service life. With compressors, energy costs account for the lion’s share of total expenditure. KAESER therefore designed its SX series compressors with optimum energy efficiency in mind. Refinements to the energy-saving SIGMA PROFILE airend rotors and the use of premium efficiency IE3 motors have significantly contributed to the increased perfor mance of these versatile compressors. The addition of the SIGMA CONTROL 2 internal ...
Description: max. working pressure: 8 ,bars rated power: ,5,5 kW working hours total: approx. 40268 hrs working hours under load: approx. 10902 hrs. time left to maintenance: approx. 653 hrs.  , please also have a look at the video of this machine Please note: compressors are delivered free of liquids, media, oils and fluids inside! suction capacity: 5,5 kW, operating pressure: 8 bar, modelname / number: SM 10, year of manufacture: 2,018, Approx. Onsite Dimension. (l x w x h): 630 x 762 x 1,100 mm, weight approx.: 275 kg
Description: Serial number: 1273 Connection: 18.5 kW Operating pressure: 11 bar Temperature: 3 - 45°C Speed: 2950 rpm Approx. Onsite Dimension. (l x w x h): 1,400 x 800 x 1,200 mm, weight approx.: 450 kg
Description: max. working pressure: 10 ,bars rated ,power: 5,5 kW working hours total: approx. 1492 hrs working hours under load: approx. 531 hrs time left till maintenance: approx. 1508 hrs Please note: compressors are delivered free of liquids, media, oils and fluids inside! suction capacity: 5.5 kW, operating pressure: 10 bar, modelname / number: AIRCENTER SM 10, year of manufacture: 2,022, Approx. Onsite Dimension. (l x w x h): 630 x 594 x 1,716 mm, weight approx.: 410 kg
Description: rated power: 5,5 kW air flow: 800 l/m working hours: approx. 3297 hrs. working hours under load: approx. 1029 hrs. max.working pressure: 8.5 bars time left to regular maintenance: approx. 3000 hrs. regulary maintained service manual: unavailable  , energy-saving performance the efficiency of a machine depends on the total costs incurred throughout the equipment’s entire service life with compressors, energy costs account for the lion’s share of total expenditure KAESER therefore designed its SX series compressors with optimum energy efficiency in mind. refinements to the energy-saving SIGMA PROFILE airend rotors and the use of premium efficiency IE3 motors have significantly contributed to the increased perfor mance of these versatile compressors the addition of the SIGMA CONTROL BASIC internal controller and KAESER’s unique cooling system have help ...
Description: KAESER TB 19 Cycling Refrigerated Air Dryer flow rate (m3/min): 2,10 pressure loss, refrigeration dryer (bar): 0,19 elect. power consumption at 100% flow rate (kW): 0,43 elect. power consumption at 50% flow rate (kW): 0,24 compressed air connection (G): 1 condensate drain connection (G): 1⁄4 electrical supply : 230 V/1 Ph/50 Hz Other features : Floating contacts: refrigerant compressor running, high pressure dew point The Kaeser cycling control provides maximum efficiency by operating the refrigerant compressor only when necessary. This is achieved by utilizing a thermal storage medium. The refrigerant system cools the medium to a certain temperature, cuts off and then stands by until the temperature rises to a predetermined level before switching on again. Therefore, the dryer is not wasting energy when the demand is low. A non-cycling dryer continuous to op ...
Description: KAESER ASD 37 SFC with Inverter Drive  , rated power: 22 kW air flow: 3700 l/m working hours: approx. 20000 hrs, 18000 hrs. under load time left to regular maintenance: approx. 3000 hrs. max.working pressure: 8.5 bar equipped with 1 RFID user card! regulary maintained service manual: unavailable  , ASD – Multiple savings zhe newly improved ASD systems save energy in a number of ways: equipped with further-refined SIGMA PRO FILE rotors, the airends are controlled and monitored by the industrial PC-based SIGMA CONTROL 2 compressor controller. This advanced controller matches compressed air delivery to actual air demand and keeps costly idling time to an absolute minimum, thanks to its dynamic control mode save energy with the SIGMA PROFILE at the heart of every ASD system lies a premium-quality airend featuring Kaeser’s SIGMA PROFILE rotors flow ...
Description: KAESER ASK 34 SFC with Inverter Drive and Heat Recovery Option  , rated power: 18.5 kW air flow: 3600 l/m working hours: approx. 15948 hrs., 12845 hrs. under load max. working pressure: ,8 bar regulary maintained equipped with 1 RFID user card! service manual: unavailable  , integrated SFC control cabinet housed in its own integrated yet insulated control cabinet the SFC frequency converter is shielded from heat arising from the compressor a separate fan keeps operating tem peratures in the optimum range, so as to ensure maximum performance and service life SIGMA CONTROL 2 traffic light” LED indicators show operating status at a glance, plain text display, 30 selectable languages, soft-touch keys with icons, fully automatic monitoring and control selection of Dual, Quadro, Vario and Continuous control as standard ethernet interface for connec ...
Description: flow rate (m3/min): 0,6 pressure loss refrigeration dryer ( bar): 0,19 , eect. power consumption at 100% flow rate ( kw): 0,43 , elect. power consumption at 50% flow rate ( kw): 0,24 , compressed air connection ( g): 1 , condensate drain connection ( g): 1⁄4 , electrical supply : 230 v/1 Ph/50 Hz , floating contacts: refrigerant compressor running, high pressure dew point Approx. Onsite Dimension. (l x w x h): 620 x 540 x 963 mm, weight approx.: 68 kg
Description: volume flow at 8 bar ( g) 0,73 m³/min , total working hours: approx. 19000 hrs. integrated air dryer Kaeser TA 5 , volume of compressed air tank: 280 l , rated power of drive motor: 5.5 kW , drive motor speed: 2930 rpm , , refrigerant: R134 a , , filling quantity cooling oil: 3.9 l ,  , please also have a look at the video of this compressor compressors are delivered free of liquids, media, oils and fluids inside! modelname / number: SM8TA8-280, year of manufacture: 1,999, Approx. Onsite Dimension. (l x w x h): 1,600 x 1,400 x 1,500 mm, weight approx.: 440 kg
Description: rated power: 22 kW , air flow: 3700 l/min. working hours: approx. 20000 hrs. working hours under load: approx. 18000 hrs. , time left to regular maintenance: approx. 3000 hrs. , max.working pressure: 11 bar regulary maintained ,  , please also have a look at the video of this compressor compressors are delivered free of liquids, media, oils and fluids inside! flow rate: 3700 l/min, suction capacity: 22 kW, operating pressure: 11 bar, modelname / number: ASD 37, year of manufacture: 2,010, Approx. Onsite Dimension. (l x w x h): 1,850 x 921 x 1,505 mm, weight approx.: 582 kg
Description: rated power: 22 kW , air flow: 3700 l/min. working hours: approx. 20000 hrs working hours under load: approx. 18000 hrs. , max.working pressure: 11 bar regulary maintained  , please also have a look at the video of this machine , compressors are delivered free of liquids, media, oils and fluids inside! flow rate: 3700 l/min, suction capacity: 22 kW, operating pressure: 11 bar, modelname / number: ASD 37, year of manufacture: 2,010, Approx. Onsite Dimension. (l x w x h): 1,850 x 921 x 1,505 mm, weight approx.: 582 kg
Description: rated power: 11 kW , air flow: 1860 l/min working hours: approx. 17010 hrs. , working hours under load: approx. 14000 hrs. max. working pressure: 11 bars , time left to regular maintenance: approx. 2500 hrs. , regulary maintained  , please also have a look at the video of this machine , compressors are delivered free of liquids, media, oils and fluids inside! flow rate: 1860 l/min, suction capacity: 11 kW, operating pressure: 11 bar, modelname / number: SK 19, year of manufacture: 2,005, Approx. Onsite Dimension. (l x w x h): 812 x 1,117 x 914 mm, weight approx.: 300 kg
Description: rated power: 11 kW , air flow: 1860 l/min , working hours: approx. 13000 hrs. , working hours under load: approx. 10000 hrs. max. working pressure: 11 bars , time left to regular maintenance: approx. 2500 hrs. regulary maintained ,  , please also have a look at the video of this machine , compressors are delivered free of liquids, media, oils and fluids inside! flow rate: 1860 l/min, suction capacity: 11 kW, operating pressure: 11 bar, modelname / number: SK 19, year of manufacture: 2,005, Approx. Onsite Dimension. (l x w x h): 812 x 1,117 x 914 mm, weight approx.: 300 kg
Description: rated power: 22 kW , air flow: 3600 l/min. working hours: approx. 12100 hrs. / approx. 9000 hrs. under load , max. working pressure: 10 bars , time left to regular maintenance: approx. 2500 hrs. ,  , refurbished compressor, parts replaced: electric motor bearings intake valve original service kit , MPV original service kit , thermostat , air filter , oil filter air/oil separator , cabin filter ,  , please also have a look at the video of this machine , compressors are delivered free of liquids, media, oils and fluids inside! flow rate: 3600 l/min., suction capacity: 22 kW, operating pressure: 10 bar, modelname / number: Airtower 36, year of manufacture: 2,000, Approx. Onsite Dimension. (l x w x h): 1,420 x 813 x 1,092 mm, weight approx.: 490 kg
Description: serial number: TH371CES4000607026 refrigerant: R404 a / 12 kg Approx. Onsite Dimension. (l x w x h): 1,287 x 1,270 x 2,162 mm, weight approx.: 600 kg
Description: Article number 1.9624.5 , Serial number 01118408 , Nominal power 7.5 kW , Motor 3000 1/min , Permissible operating overpressure 10 bar read operating hours 14626 , Approx. Onsite Dimension. (l x w x h): 700 x 640 x 700 mm, weight approx.: 200 kg
Description: Emulsion splitting system, oil-water separation system The cost-effective and permanently reliable solution to the problem is usually the oil/water separation for dispersed condensates. The purified water fulfils the legal regulations for sewer discharge. Approx. Onsite Dimension. (l x w x h): 590 x 590 x 1,170 mm, weight approx.: 58 kg
Description: The cost-effective and permanently reliable solution to the problem is usually the oil/water separation for dispersed condensates. The purified water fulfils the legal regulations for sewer discharge. Approx. Onsite Dimension. (l x w x h): 590 x 590 x 1,170 mm, weight approx.: 58 kg
Description: Serial number 3297 max. operating pressure 16 bar Approx. Onsite Dimension. (l x w x h): 750 x 600 x 1,000 mm, weight approx.: 200 kg
Description: Serial number 1008 Nominal power 0.9 kW Motor 2955 rpm max. operating overpressure 11 bar Ambient temperature 3° to 45° C Approx. Onsite Dimension. (l x w x h): 700 x 600 x 1,200 mm, weight approx.: 300 kg
Description: Screw compressor Serial number 1027 Power: 30 kW Working speed: 3000 Rpm Working pressure: 11 bar Working temperature: +3º / + 45º C CE regulations Controller needs to be changed! year of manufacture: 2,004, Approx. Onsite Dimension. (l x w x h): 1,400 x 900 x 1,510 mm, weight approx.: 700 kg
Description: Screw compressor Serial number 1026 Power: 30 kW Working speed: 3000 Rpm Working pressure: 11 bar Working temperature: +3º / + 45º C Load hours according to the counter: 36.316 h CE regulations Approx. Onsite Dimension. (l x w x h): 1,400 x 900 x 1,510 mm, weight approx.: 700 kg
Description: Compressed air dryers - KAESER TC 44 air dryer , Serial number 1103 Refrigerant: R134a Maximum working pressure: 18 Bar YOM: 2004 - HANKINSON INTERNATIONAL air dryer Consisting of 2 HHL 450 compressed air tanks Serial numbers 4306/26 and 4306/30 Capacity of each tank: 133 L Working pressure: 16 bar Minimum working temperature: -10º C Maximum working temperature: 66º C YOM: 2004 Approx. Onsite Dimension. (l x w x h): 1,900 x 1,500 x 2,000 mm, weight approx.: 500 kg
Emulsion splitting plant, oil-water separation system The inexpensive and permanently reliable The solution to the problem is usually the oil/water Separation for dispersed condensates. The purified water meets the legal Sewer discharge regulations
Emulsion splitting plant, oil-water separation system The inexpensive and permanently reliable The solution to the problem is usually the oil / water Separation for dispersed condensates. The purified water meets the legal Sewer discharge regulations -Dimensions: 500 x 1000 mm -Weight: 50 kg
Emulsion splitting plant, oil-water separation system -The cost-effective and permanently reliable solution to the problem is usually the oil/water separation for dispersed condensates. The purified water meets the legal requirements for sewer discharge. -Dimensions: 590/590/H1170 mm -Weight: 58 kg