used LOEWER for sale

Abrasive belt width 200 mm Grinding width 190 mm Sanding belt length 1600 mm Maximum grinding thickness 120 mm Motor power 5.5 kW Grinding motor speed 2,870 rpm. Abrasive belt speed 1,300 m/min. Oscillating abrasive belt

used Löwer belt sander RSM 2800 SX Grinding width approx. 200 mm Grinding height approx. 120 mm Belt length approx. 1600 mm Belt width approx. 200 mm

Beam Sander Manufacturer: Löwer Model: HBS 400 UB Year: 2012 Sanding width: 390mm Workpiece height: 15-390 mm

Grinding machine Löwer ESM 300 Built in 1987 Grinding width 290 mm Sanding belt width 300 mm Oscillating abrasive belt Usable height 120 mm Abrasive belt length 1800 mm Table length 1200 mm With support rail Support rail length 3000 mm Feed speed 3/6/12 m/min. Motor power drive motor 7.5 kW Air connection 6 bar Brush unit in the outlet The abrasive belt is guided over three rollers. Between the two lower rollers is the sanding pad. To get a clean cut, the front lower roller has been rubberized. She takes care of the pre-grinding, and the sanding pad behind it the finishing touches. Weight 798 kg with pallet Dimensions with support rail 3000 mm x 1200 mm x H 1700 mm Dimensions without support rail 1300 mm x 950 mm x H 1700 mm

Structuring Machine, Brush Grinding Machine Make: Löwer Model: SMN 650 BB Year of construction: 2017 2 grinding shafts

Wet grinding machine Manufacturer: Loewer Type: SmartGrinder SG300 K Year of construction: 2017 Rectangular ear loops Square tubes 180 x 180 mm L= 300 mm Rectangular tubes W = 280 mm, H= 180 mm, L = at least 300 mm For grinding or deburring metal Wet scrubber UT-N3 with sludge tank 2 pieces roller conveyor Ulmatec wet scrubber Type: UT-N 3 Year of construction: 2017 Motor: 3.0 kW, 400 V, 50 Hz

Number of sanding units: 4 St. sanding width: 200 mm Sanding height max.: 180 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 300 mm Number of sanding units: 6 st. Workpiece thickness max.: 8-230 mm Weight: 3100 kg Löwer double-sided grinding machine DSM 3304 GDR --------------------------------- Manufacturer short description: Double-sided single wood sander for sanding of solid wood such as window wood or Furniture components made of MDF etc. Stable top design with electronic articulated pressure shoes for fine grinding well-planed or veneered surfaces. Sanding units arranged one after the other Fine grinding, disc aggregates for defibering grinding, Cleaning brush, from above and below as follows: 1. Belt sanding unit with articulated pressure shoe 2. Belt sanding unit with articulated pressure shoe 3. Disc unit with brush sanding flaps diameter 320mm 4. Cleaning brush with Tempicofibre trim diameter 120mm --------------------------------- detailed long text of the manufacturers description a ...

Number of sanding units: 8 st. sanding width: 180 (260) mm Sanding height max.: 160 mm Dimensions (length / width): 3065x1600x1900 mm weight of the machine ca.: 1500 kg Löwer Leistomad SD Window single wood intermediate sanding machine --------------------------------- Machine factory tested by Löwer! Automatic fine grinding machine for wood grinding (smoothing, defibering and Edge breaking) or intermediate sanding of profiled window bars. With soft disc Technology for the visible surfaces as well as automatically safe profile and Width adjustment. - 2 lamella roller units on the side, each 0.37kW, L=100mm, D=200mm - 1 softisc unit Ø=200mm above 0.75kW, - 1 slat roller unit L=200mm above 0.75kW - 1 soft disc unit Ø=200mm below 0.75kW, - 1 lamella roller unit L=200mm below 0.75kW, - 2 lamella roller units on the side, each 0.37kW, L=100mm, D=200mm - Linear guidance of all grinding uni ...

Number of sanding units: 2 St. sanding width: 290 mm Sanding height max.: 180 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of sanding units: 2 st. sanding width: 390 mm Sanding height max.: 390 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of sanding units: 2 St sanding width: 190 mm Sanding height max.: 2 - 180 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of sanding units: 8 st. sanding width: 180 (260) mm Sanding height max.: 160 mm Dimensions (L/W/H): 3065x1600x1900 mm weight of the machine ca.: 1300 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of sanding units: 4 St. sanding width: 200 mm Sanding height max.: 150 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table dimensions: 1000,400 mm pneumatic clamping: 4 St. moveable: Option For fast compression of Minizinken- or Softline compounds especially for larger cross-sections - Independent of the angle - Especially suitable for arched manufacturing - Table size 1000 x 400 mm - Pneumatic connection 10 bar - Air consumption 1 cdm / stroke - 4 clamping cylinders for workpiece clamping - Pairs switchable - Right half of the table supported on hardened shafts through ball linear bearings - 2 pressure cylinder for linear table displacement, separately switchable - Weight: 200 kg - CE - execution (Technical details according to manufacturer - without guarantee.!) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of sanding units: 2 St. sanding width: 190 mm Sanding height max.: 2-180 mm LÖWER-Doppelseitige Schleifmaschine DSM 2000 Doppelseitige Einzelholzschleifmaschine zum Schleifen von Massivholz wie z.B. Fensterhölzern etc. Stabile Top-Aus- führung mit langen Gußtischen, Bürst- und Finisheinrichtung und Transportbandvorschub. Geeignet für hohe Dauerbelastung auch bei höheren Spanabnahmen. - versetzt angeordnete Schleif- und Finishaggregate oben und unten - direkt angetriebene gummierte Schleifrollen für schlupffreie Kraftübertragung - Kombischliff über Rolle und Schuh für hohe Spanabnahmen bei gleichzeitig ebener Eingriffszone - wartungs- und verschleißfreie CERMET-beschichtete Schleifschuhe mit sehr guter Wärmeleitfähigkeit und absoluter Maßhaltigkeit - Fremdkühlung der Schleifzonen für einen kühleren Schliff und höhere Schleifbandstandzeiten - zwangsgeführte pneu ...

Number of sanding units: 1 st. sanding width: 150 mm Sanding height max.: 150 mm Löwer edge finishing machine MiniSpin N Machines for finishing and intermediate sanding Edges and profiles with a grinding spindle horizontal or vertical. Motor 0.75 KW Spindle in vertical position for processing edges Spindle in horizontal position, swung out to the side for processing longer profile bars or similar or in Connection with a combination grinding head for grinding of edges with a sanding flap disc Grinding head can be swiveled +/- 20° for processing of slanted edges Working height / width 150 mm max. diameter roller / brush < 300 mm Frequency converter for continuous adjustment of the Spindle speed 200 - 800 rpm Table size 400 x 800 mm two directions of rotation selectable Operating voltage 110 / 240 V, 50 / 60 Hz Suction connection D=100 mm Weight approx. 100 kg including grooved base body  ...

Number of sanding units: 8 st. sanding width: 150 mm Machine can be inspected during production! Leistomat - Finisch and intermediate leveling machine Löwer LZ 8 -------------------------------------------------- ------------------- for finish sanding (smoothing, defibering and edge breaking) or intermediate sanding profiled window latch - Finish and intermediate sanding machine with eight sanding blade aggregates, 2 surface units at the top (synchronism / counter-rotation) 2 surface units below (synchronism / counter-rotation) 4 profile units with angled arrangement top right, bottom right, top left, bottom left, all mating - linear guidance of all grinding units over Linear ball bearing sets on hardened shafts - Timed immersion of all in the opposite direction rotating grinding units directly above the incoming Workpiece edges to avoid looping through the Primer in the front edge area ...

Table dimensions: 1000,400 mm pneumatic clamping: 2 St. moveable: Option For quick pressing of Minizinken- or Soflineverbindungen - Independent of the angle - Particularly suitable for arched manufacturing in window - Table size 1000 x 400 mm - Pneumatic connector 10 bar - Air consumption: 0.5 cdm / stroke - Two clamping cylinders for workpiece clamping - Right half of the table stored on hardened shafts via linear ball bearings - 1 pressure cylinders for linear displacement table - CE - execution (technical data according to manufacturer - without guarantee.!) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 300mm, workpiece thickness: 0.5-150mm, weight: 800kg, operational hours counter: 1164h, suitable for sanding square tubes, for decorative finish or as preparation for chrome plating, sanding flat material, satin finishing and roughening, with Extraction Absaugung ULMATEC UT-N3.

Description: Double-sided four-belt single wood sanding machine for sanding solid wood such as window timbers etc. Sanding from above: 1. belt sanding unit with steel roller 2. belt sanding unit with shoe 3. finishing unit with brush Sanding from bottom 1. belt sanding unit with steel roller 2. belt sanding unit with shoe 3. finishing unit with brush  , Technical data - Sanding belt speed 22 m/s - Sanding belt length 1800mm - Sanding belt width 200mm - Working width 190mm - Sanding thickness 2-180mm The roller conveyors and conveyor belts shown are not included in the scope of delivery serial number: 10,434, hollow height: 2 - 180 mm, grinding band dimension: 1800 x 200 mm, packing measure approx (l x w x h): 3,500 x 1,000 x 2,000 mm, Approx. Onsite Dimension. (l x w x h): 3,000 x 1,000 x 2,000 mm, weight approx.: 3,000 kg

Frame Sanding Machine Sanding Pad, Oscillation, Frame Sanding Device, Feed Belt, Belt Cleaning ---------- Technical Data ---------- Grinding width: 190 mm, max. workpiece thickness: 120 mm, speed: 6,11,16 m/min., motor: 5.5 kW, weight: 550 kg Sold as is, without technical inspection