used MAN for sale

MAN E0826 E302 Natural Gas Generator Set for sale. Model: MAN E0826 E302 Fuel: Natural Gas Year: 2004 Hours: 200 Capacity: 65 kW Hz: 50 Voltage: 400 V Scope of supply: Engine, alternator, acoustic canopy with panels, exhaust gas heat exchanger and other accessories . Price: 25,000€

16MW MAN TURBO back pressure turbine for sale. Model: MARC4 B-00 Year: 2008 Hours: 60,145 Capacity: 16,230 kW Hz: 50 Scope of supply: Steam turbine, Gearbox, Generator, Lubrication oil system, Control oil system, Instrumentation and control system. General Information The turbine is well preserved. Additional info: Steam and cooling system piping not included. Service History Status: All required maintenance carried out in compliance with the operating manuals. There is a leaking sealing at the connection. Cost of repair is estimated to be below €50,000. No further defects are known at this moment. The last revision planned in 2018 was not carried out due to decommissioning. Most likely it will need a major overhaul. Available for Sale. Price: Please apply

Man 12 Cylinder container for sale. Price: Please Apply

MAN E0836 E302 CHP Unit in Acoustic Canopy for Sale. Capacity: 70kW Hours: 4,500 Year: 2011 Fuel: Natural gas Voltage: 400 Hz: 50 Scope of supply: Engine, Alternator, Control Panel, Acoustic canopy, Canopy fan, Engine water pump. Footprint of the combined heat and power unit is 3.4 meters x 1.14 meters including the control panel. It has been serviced every 1000 hours. The unit is not due an overhaul until 24,000 hours. Engine has been barred over, and the canopy fan and engine water pump have been powered up. The unit is in a warm boiler room so is in good condition. Price: Please Apply

2 x MAN E2842 Syngas Generator Sets Specially-designed complete 140kW Syngas Gensets on zero hours with containers. Make: MAN Hours: 0 Year: 2015 Capacity: 140kW Fuel: Syngas HZ: 50 V: 400 Scope of Supply: Engine, alternator, base frame, control panel, gas line, exhaust gas heat exchanger, container. Engine has been inspected and is in excellent condition. The engine has been manually turned over and turns easily. Equipment has been stored indoors. Price: Please Apply

Make and Model: MAN E3268L E212 Fuel: Biogas/Natural Gas Year: 2017 Hours: 0 Capacity kW: 370 HZ: 50 Voltage: 400V Scope of supply: Engine, Alternator, Base Frame, Gas Line, ComAp Control System, Motortech Ignition boxes, Heat Exchanger and all the associated equipment. More details below . 1 x IV 8 control screen 1x AIO-NTC-BB - Base Box with AFR dongle 1 x InteliDrive Mobile MAN logger unit 2 x I-IO8/8 Binary input/output cards 2 x I-AIN8 analogue input cards 1 x I- AIN8TC thermocouple input card 1 x DN 100 throttle body with stepper motor and wiring harness 3 x Varistep 3 controllers - the system only needs 2 1 x Varifuel 2 gas mixer and all the adapters, bolts and gaskets 1 x Detcon 20 Knocking controller with 8 knock sensors and cables 1 x MIC 4 ignition controller with output harness 1 x Cam pick up with harness 1 x speed pickup with harness 1 x Set o ...

Make and Model: MAN E2866E - REBUILT This MAN E2866E engine has been fully rebuilt with genuine MAN heads. Year: 1997 Hours: 50,000 kW: 85 Fuel: Natural Gas Hz: 50 V: 415 Scope of supply: Engine, Alternator, Control panel (Comap), Exhaust Gas Heat Exchanger, Water pump, Canopy with new foam sound attenuationand internal mesh. Service details: Exhaust Gas Heat exchanger cleaned and new insulation fitted. New Plate heat exchanger fitted. New Canopy Fan installed. Engine water pump overhauled and new seal fitted. Control system fitted with Comap control all passwords available. Unit fully cleaned & sprayed. Canopy fitted with new foam sound attenuation and internal mesh. New GAC governor & Actuator fitted. Electronic Ignition fitted. New canopy light fitted. Skid rewired with new temperature & pressure probes fitted. New condensate drain and trap fitted. New  ...

Complete MAN ELECTRO HAGL generating set for sale. Make and model: MAN ELECTRO HAGL E0834 E312 Year: 2011 Power: 47KW Hours: 32,000h Fuel: Biogas Scope of supply: Complete generating set with engine, alternator, frame, control panel, exchanger, radiator. Price: Please apply

MAN Lean Burn Biogas 2876 LE302 Containerised Generator Model: MAN Lean Burn Biogas 2876 LE302 Capacity: 220 kW Hours: 0 Year: 2023 Fuel: Biogas V: 400 HZ: 50 Scope of supply: New MAN 2876 LE302 and ComAp Control Panel. Used Container, Alternator, Radiators and Gas line. MAN Engine comes with manufacturers warranty.

Power 324 KW, Displacement 12419 ccm, Diesel, permissible Ges. Weight 26000 kg, abs. Mileage 463.083 KM, AMNERKUNG: The loading crane of the vehicle requires a TÜV approval!

Complete MAN E3262 LE202 Natural Gas container set Make and Model: MAN E3262 LE202 Fuel: Natural Gas/Biogas Year: 2020 Man Block / 2016 Container and ancillaries Hours: 0 Capacity kW: 530 HZ: 50 Voltage:400 Scope of supply: Complete container generating set including - Engine, Alternator, Control panel (ComAp), Container, Exhaust gas heat exchanger, Gas Blower, Radiator and Gas line.

Complete plug-and-play natural gas plant. Make and Model: MAN E2876 E312 Capacity: 140kW Year: 2016 Hours: 6954 Fuel: Nat Gas Volts: 400 V: 50Hz The plant was oversized compared to the needs of the factory in which it was located, and for this reason it was sold despite the low number of operating hours. Scope of Supply: Engine alternator control panel gas line acoustic canopy muffler air intake filter exhaust air filter and other accessories.

MAN E0836 LE302 Biogas Containerised Generating set. The engine is from 2019. The container is from 2009. It has been carefully maintained and stopped running in October 2023. Service History December 2021: New pistons and cylinder heads June 2023: New turbo Brand: MAN Model: E0836 LE302 Hours: 32,000 Capacity: 110 kW Years: 2019 Fuel: Biogas Voltage: 400V Frequency: 50Hz Scope of supply: Full container with engine, alternator (Leroy Somer), frame, control panel, Motortech ignition system, 2 radiators, plate heat exchanger, exhaust gas heat exchanger, gas line, carbon filter.

MAN 32/40 Cylinder heads Augsburg type 11 pcs available froms stock in good condition std sized seat bores, free of cracks and weldings from our istanbul stock

Natural gas CHP MAN E2876 E312 Power el.: 143 kW Power th.: 205 kW 6 cylinders Commissioning: 2017 Hours: 44650 Full maintenance by AVS Aggregate has been preserved Generator: Manufacturer: FKI - Type: MJB250LB/4 - 158/188 kVA Soundproofing hood 2x heat exchanger and heat accumulator 2x 5000 liters Subject to prior sale - errors possible Internal Reference Number: E-1175

Manufacturer: MAN Model: E2842LE322 Year of manufacturing: 2013 Rated Output Power: 400 kw Speed: 1500 RPM Voltage: 400 V Frequency: 50 Hz Running hours: 34,000 hours If you are looking for the great reliable source of energy to enhance your business, production and lighting people homes with affordability. Choose us, for your energy need to be sorted. Contact us with your company details and further information at: 00447391302372 00447956518924

MAN 27/38 Cylinder heads Std sized seat bores Free of cracks and weldings 20 pcs available in good condition From our istanbul stock Please contact us at infofin-marine

MAN 28/32H spares available: MAN 28/32H 15 pcs cylinder heads with std sized exh seat bores free of cracks and weldings MAN 28/32H pistons 10 pcs std sized ring grooves free of cracks and weldings MAN 28/32H connecting rods 5 pcs free of ovality and cracks MAN 28/32H water jackets 8 pcs From our istanbul stock Please contact us at infofin-marine

MAN 6L23/30 Crankshaft in good condition STD size, Measurment Control, Hardness Control, Crack Test, Oscillation tests done From our istanbul stock contact us at: infofin-marine for more information

MAN TGX 26.480 6x2 Mileage: 712545km Engine/Assistance Systems -D2676LF45 - 480 hp / 353 KW EURO6 SCR-2300Nm(2500 with TopTorque) C-R New -Electronic speed limiter 89 km/h + 1km/h Cruise Control Tolerance -Low noise certificate for Austria and L- sign • COP document • Exhaust gas confirmation Euronorm • CEMT certificate • National approval documentation Germany noise measure 80 dB (92/97EEC) -Fuel filter -Start-up aid -HA Air -HA differential lock -Fuel tank aluminium 800l right and 60l AdBlue • Fuel tank attachment • Lockable tank cap • 1 pc. ventilated for Simultaneous locking - AdBlue tank cap lockable 1 piece -MAN BrakeMatic (electronic braking system) -Emergency Brake Assist 2 (EBA2) -Anti-lock braking system (ABS) -Traction Control (ASR) -Electronic Stability Program (ESP) -Gearshift MAN ComfortShift -Transmission ZF 16 S 23 ...

MAN 9L32/40 complete engine 3 pieces available Each engine 4320 Kw at 720 Rpm Also able to sell crankshaft / spare parts or the cylinder block please contact: info@fin-marine

MAN 2876 E312 gas engine It is a refurbished exchange engine. Repaired in accordance with MAN manufacturer guidelines and RAL quality seals. - Four-stroke gasoline gas engine, 150 kW - 6 cylinders in series - Engine cooling: water-cooled - Water-cooled exhaust pipe Installation, installation and service around engine and CHP optionally possible. Old part deposit: 6.000,- EUR Please contact us for a written offer.

Used, partially repaired, tested truck engine in exchange The old part deposit in the amount of 2,500.00 Euro will be credited again regardless of the condition of the old engine 6-month warranty Price plus VAT and shipping

AT-Motor, repaired according to RAL-GZ 797 Complete motor, version biogas Four-stroke petrol gas engine (75 kW) 6 cylinders in series water-cooled engine cooling water-cooled exhaust pipe Old part deposit: 6,000 euros

AT-Motor, repaired according to RAL-GZ 797 Complete motor, version biogas Four-stroke petrol gas engine (110 kW) 6 cylinders in series water-cooled engine cooling water-cooled exhaust pipe Charging: Exhaust gas turbocharger with water-cooled turbine housing Mixture cooler: two-stage mixture cooling with high and low temperature circuit Old part deposit: 6,000 euros

MAN 2848 LE322 gas engine (biogas) 250KW It's a replacement engine for various biogas CHP. According to one manufacturer guidelines and according to RAL quality seal repaired (maintenance level R3). 1 year warranty - education, and installation and service engine and optional for CHP. Please contact us for a written offer. We have other replacement engines (2876 with 190KW and 2842 370KW) and AT cylinder heads, intercoolers, turbochargers and other components and spare parts for MAN gas engines in stock.

MAN D 2066 LF 11 Shortblock It is a refurbished exchange engine. Repaired in accordance with MAN manufacturer guidelines and RAL quality seals. Further information on the scope and execution can be found on our homepage buecker-essing.de Installation and installation as well as service around the engine optionally possible. Please contact us for a written offer. We also have other replacement engines, as well as AT cylinder heads, turbochargers, spare parts and other components in stock.

MAN D 2066 LF 57 Short-Block It is a refurbished exchange engine. Repaired in accordance with MAN manufacturer guidelines and RAL quality seals. Further information on the scope and execution can be found on our homepage buecker-essing.de Installation and installation as well as service around the engine optionally possible. Please contact us for a written offer. We also have other replacement engines, as well as AT cylinder heads, turbochargers, spare parts and other components in stock.

MAN D 0226 MTE fuselage engine, industrial/marine version It is a refurbished exchange engine. Repaired in accordance with MAN manufacturer guidelines and RAL quality seals. Further information on the scope and execution can be found on our homepage buecker-essing.de Installation and installation as well as service around the engine optionally possible. Please contact us for a written offer. We also have other replacement engines, as well as AT cylinder heads, turbochargers, spare parts and other components in stock.

MAN D 2866 LUH 24

MAN 2842 LE322 gas engine (biogas) 370KW It's a replacement engine for various biogas CHP. According to one manufacturer guidelines and according to RAL quality seal repaired (maintenance level R3). 1 year warranty - education, and installation and service engine and optional for CHP. Please contact us for a written offer. We have other replacement engines (2876 with 190KW and 2848 250KW) and AT cylinder heads, intercoolers, turbochargers and other components and spare parts for MAN gas engines in stock.

AT-Motor, repaired according to RAL-GZ 797 Complete motor, version biogas Four-stroke petrol gas engine (54 kW) 4 cylinders in series water-cooled engine cooling water-cooled exhaust pipe Old part deposit: 6,000 euros

MAN 2876 LE302 gas engine (biogas) 190KW (also as 210KW-Version) It's a replacement engine for various biogas CHP. Overhauled according to manufacturer guidelines and RAL quality seal(maintenance level R3). 1 year warranty - education, and installation and service engine and optional for CHP. Please contact us for a quotation. We have other Exchange engines (2848 with 250KW and 2842 370KW) and AT cylinder heads, intercoolers, turbochargers, etc. and other components and spare parts for MAN gas engines in stock.

MAN D 2066 LF 12 - Euro 4-287 KW - 390 HP Motor was cpl. repaired according to RAL GZ-797: with new piston rings, new bearings, new oil pump, AT cam shaft, AT injectors, new water pump, oil and fuel filters 1 year warranty without KM-limit Old Engine must be returned

MAN D 2066 LF 31 - Euro 4-324 KW - 440 HP Motor was cpl. repaired according to RAL GZ-797: with new cylinder liners, Pistons, bearings, turbochargers, air compressor, injectors, high pressure pump - without starter, alternator and clutch Repair enabled old part must be returned. Maximum mortgage of old part of 4.000,00 = €

Motor was sealed front and rear new - upgraded oil pump, thermostat, oil filter, fuel - engine was installed on engine test bench and a cpl. Test run was carried out 6 months warranty on the motor mechanism Mileage only 200,000 km old part pledge 4,500.00 = €

MAN D 2876 LF 13 - Euro 4-390 KW - 530 HP Motor was cpl. repaired according to RAL GZ-797: with new pistons and liners, new bearings, new oil pump, AT cam shaft, AT injectors, new water pump, oil and fuel filters 1 year warranty without KM-limit Bauglieches old part must be returned

Speed: 1500 1/min AVK Synchron Generator DSG52M1-4 400/231 V, 50 Hz Type: Container Subject to prior sale - errors possible Ref. No.: E-1173

Diesel-Generator Power: 500 kVA Year: 1997 Operating hours: 49612 Generator: Stamford HC I534D1 Speed: 1500 1/min Voltage: 400/231 V, 50 Hz Battery voltage: 24 V 20 ft container Weight: 8.5 tons Manual switchgear with motor monitoring Subject to prior sale - errors possible! Internal reference number: E-1004-49

Engine: MAN D2858 Power: 115 kVA Generator: AEG IKB 55/240-4 Year built: 1972 Operating hours: Only 200 because only ran in emergency power mode Control cabinet has been renewed After disassembly, a test run was carried out. Subject to prior sale - errors possible Internal reference number: E-1004-46

2x MAN diesel gen sets in good condition with the following specifications: Manufacturer: MAN Fuel: Diesel Manufacture year: 1996 90 Kva 6 cylinder, with all parts in running condition.

MAN gas engine with ignition used

SUB: FOR SALE... MAN 8L 20 / 27. USED CRANKSHAFTS AT TURKEY HAVE A GDY SIR WE VE 2 PCS USED MAN 8L 20 / 27 CRANKSHAFTS AT OUR STOCK AT TURKEY.. CRANSHAFTS MEASURMENTS IN STANDART SIZE LIMITIS CRANKSHAFT CLASS STAMP ON ATTACHED PICTURE. CRANKSHAFTS ARE READY TO INSPECTION AT WORK SHOP IF YOU HAVE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurlubay Regards; Aliaga marine services E-mail: infoaliagamarine.com PHN/fax: + 90 232 618 03 88 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY

MAN gas generator enclosed in sound proof chamber, in good condition. It has the following specifications: Manufacturer: MAN Fuel: Gas Manufacture year: 2010 Kva: 200 Power: 130 kW Other specs: Turbo included. Control panel included.

Stx MAN 16V32/40 Crankshaft 4 Pieces available in our stock in Istanbul Turkey Crankshaft is in good condition standard sized Tests are done for: Measurement Hardness Crack Bending For more information please contact with us: info@fin-marine

Original MAN valve New! ---------------------------------------------------------------------- ---------- Note: We also have various RECON parts of different manufacturers/types available. We are happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

Original MAN valve New! ---------------------------------------------------------------------- ---------- Note: We also have various RECON parts of different manufacturers/types available. We are happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

new! Piston ring set 08-431600-00 108mm x3 + 2.5 + 4mm standard ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

RECON Crankshaft -1 level undersize -Operating hours: 0h ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

RECON - complete ground to 1st level undersize 204,5 mm - pn. X11.02001-9047 - incl. counterweights ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us